* Updated Server->migrate_virsh() to set 'servers' -> 'server_state' to 'migrating' and clear it again once the migation completes. Also added support for cold (frozen) versus live migrations.
* Updated Cluster->parse_cib() to check if a server with the server_state set to 'migrating' isn't actually migrating anymore and, if not, to clear that state. This is needed as scan-server will blindly ignore/skip any migrating server, and if a migration call is interrupted, the state could get stuck.
* Updated the 'servers' database table (and associated Database methods) to add columns for;
** server_ram_in_use - tracking RAM used by a running server
** server_configured_ram - RAM allocated to a running server (used with the above to alert a user and track _currently_ available RAM)
** server_updated_by_user - To be set by Striker tools to indicate when the user made a change that needs to push out to nodes / running server.
** server_boot_time - Tracks the unixtime when the server booted (to track uptime even if the server migrates across nodes).
* Created Get->anvil_name_from_uuid() to easily convert an Anvil! UUID into a name. Also created ->host_uuid_from_name() to translate a host name into a host UUID.
* Created Server->get_runtime() that translates a server name into a process ID and then uses that to determine how long (in seconds) it has been running. This is used when a server transitions from 'shut off' to 'running' to determine exactly when the server booted (current time - runtime).
* Renamed all 'Server->parse_definition' calls that used 'from_memory' to 'from_virsh' to clarify the data source.
* Made scan-hardware smarter about RAM change alerts.
* Updated scancore to load agent strings on startup so that processing pending alerts works properly.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed the 'defitintions' table to 'server_definitions' to clarify the purpose, and made all the 'server' columns have then 'not null' constraint.
* Created Database->insert_or_update_servers(), ->get_servers(), ->insert_or_update_server_definitions() and ->get_server_definitions().
* Updated scancore, anvil-daemon, and scan agents to not run unless they're run with root privs.
* Got scan-server to update the servers / server_definition tables and the on-disk file when needed.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Began (but haven't finished) Database->insert_or_update_servers().
* Created Storage->get_file_stats() to collect the (l)stat information for a file.
* Got more work done on scan-server.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created 'Cluster->which_node' that returns 'node1' or 'node2' to indicate which node a host is.
* Continued working on scan_cluster; decided to make it not host-dependent.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started work on the new scan-cluster scan agent that will parse out and store data from the pacemaker CIB.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Alert->check_alert_sent() and the 'alert_sent' table to remove 'alert_name' as it really isn't helpful given record_locator.
* Created 'Database->purge_data' that takes an array of tables and, in reverse, purges them from the database(s). This also disables archiving and resync functions now.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->insert_or_update_updated() to manage entries in the special 'updated' table.
* Updated Alert->check_alert_sent() to not use the 'type' parameter, but instead use the 'clear' parameter, to be more consistent with other methods.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Alert->register to take a hash reference for message variables to simplify when a caller plans to log and register an alert at the same time.
* Updated Convert->bytes_to_human_readable() to name the 'size' variable used internally for 'bytes' to actually be 'bytes' for better consistency.
* Created multiple new Database methods;
** ->check_condition_age() is meant to be used by scan agents to see how long a given condition has been in play (ie: how long ago power was lost to a UPS or a sensor became unreadable).
** ->insert_or_update_health() handles recording data to the new 'health' table, used for determining ideal hosts for servers between nodes.
** ->insert_or_update_power() handles recording data to the new 'power' table, used for determining how power events are handled.
** ->insert_or_update_temperature() handles recording temperature data to the new 'temperature' table, used to determine how thermal events are handled.
* Got a lot more done on the scan-hardware scan agent. Only part left now is post-scan health processing.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Dataase->check_for_schema() that scancore agents can use to check/load the SQL schema
* Updated Database->write to take the 'transaction' parameter.
* Used scan-hardware as the test mule for scan agent SQL handling.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed the scan-network skeleton scan agent to scan-hardware and started work on it based on the M2 version.
* Updated Database->get_recipients() to take the 'include_deleted' parameter, and changed the default behaviour to only return active records.
Signed-off-by: Digimer <digimer@alteeve.ca>
* More work done on Email->send_email() to, well, actually send email (which it isn't doing yet, but it's close).
* Updated Words->key() to include the bad key name when no entry for the requested key exists in the words.xml file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Dropped support for supporting imperial measurements in generated emails.
* Created Database->get_alerts() to read in alert data and ->get_recipients() to get the list of alert recipients.
* SQL Schema changes;
** Added 'alert_processed' to 'alerts' to track what alerts have been processed.
** Changed 'recipient_new_level' to 'recipient_level' now that we're only using 'notifications' as a per-host override for user/hosts alert levels.
** Removed 'recipient_units' as we're no longer supporting non-metric values.
* Updated Alert->register() to take strings for the alert level (which gets translated to integers).
* Created Email->get_current_server() to returned the mail_server_uuid of the active mail server (if any). Created ->send_alerts() to process unprocessed alerts and send emails to recipients.
* Updated Words->parse_banged_string() to take the 'language' parameter.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Tools->_set_defaults where the order the tables were sync'ed it caused primary/foreign keys would trigger DB errors when resync'ing in some cases.
* Created Database->log_connections to make it easier to log which databases are actively in use and other data about the connections.
* Fixed bugs in striker-manage-peers that (partly because of the above bugs) failed to connect to new peers properly.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got email server configuration under way. A mail server can now be configured via Email->_configure_for_server(), but more work is needed on when to switch between configs.
* Fixed some logging of passwords that wasn't being checked to see if secure logging was enabled or not.
* Fixed a bug in Striker where the back arrow in email config sub-sections weren't going back to the main email menu.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Converted most 'eval { }' calls to localize $@ and test the output of the eval, instead of checking to see if $@ was set.
* Converted all 'local' hash references to instead use the short host name of the local machine as a new standard.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Cluster->parse_cib() to take a CIB as a parameter.
* Fixed a bug in Database->get_hosts() where loading the host_ipmi value was filtered through Log->is_secure.
* Updated Striker->get_fence_data() to parse the switches to make it easier to map a fence agent's command line switches to STDIN arguments.
* Created System->parse_arguments() that converts a series of command line switches and their values into a hash. It's similar to Get->switches(), but works on any string.
* Continued work on anvil-join-anvil's fence configuration logic.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed Database->get_ip_addresses() to clear stale IP addresses.
* Finished (for now, more testing needed) System->configure_ipmi! Also created System->test_ipmi() that handles trying lanplus and various password lengths, updating hosts -> host_ipmi on successful check.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added calling 'debug => $debug' in System->X methods.
* Got more work done on System->configure_ipmi(). It should now determine if a BMC exists and pull the OEM and network details automatically.
* Updated anvil-configure-host to log more data in an attempt to find a reproducer for an odd bug where (apparently) a host was picking up the wrong job data meant for another host.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Get->host_type() the type wasn't being set for nodes and dr hosts.
* Fixed a bug in Validate->host_name() where the wrong method was being called.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the fix from the last commit for System->call to handle returned data without an ending newline to Remote->call.
* Got more work done on System->update_hosts(). It's able to add new hosts, but misses the short and FQDN host names. Need to fix that and the verify existing / manual entries aren't molested.
Signed-off-by: digimer <digimer@pulsar.alteeve.com>
* Created Get->trusted_hosts() that finds the dashboards the host uses and, if the host is in an Anvil!, the peers in the same anvil.
* Created (but not finished yet) System->update_hosts() that will add and edit entries for all IPs to trusted hosts.
* Fixed a logging bug in Striker->load_manifest().
* Fixed a bug in System->call where, the the output from the shell call didn't end in a new-line, it would not parse the return code and lease the return code string appended to the shell output.
* Fixed a big in System->change_shell_user_password() where a new-line (\n) meant for the shell call wasn't escaped properly. There was also a duplicate 'return_code' variable preventing the actual return code from being read.
* Got more work done on anvil-join-anvil to update the hacluster password (when needed).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Update striker manifest run to add an entry into the 'anvils' table, and pass the anvil_uuid to the jobs rather than the various host_uuid's.
* Fixed a bug in the 'anvils' SQL procedure that copied data into the history schema (a few columns were missing).
* Updated anvil-configure-host to reboot when finished to be certain network changes have taken effect. Also updated the handling of virsh bridges to delete the autostart symlinks if libvirtd daemon isn't running.
* Added some logic to anvil-daemon to call 'anvil-update-states' with the -v{1,3} flag depending on the active debug level.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a global switch --resync-db which takes a UUID and forces that DB to be marked as needing a resync.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->get_hosts() to store 'host_key' and 'host_uuid' data.
* Created Database->get_ssh_keys().
* Fixed a couple bugs where Get->host_type() now returns 'striker' but tests checked for 'dashboard'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated 'variables' -> 'variable_source_uuid' to type 'uuid' and removed the 'not null' constraint.
* Updated Database->insert_or_update_variables() to check/update 'variables_source_table' and 'variables_source_uuid'.
* Created the 'trusts' database table which will, when done, tell anvil-daemon which users@machines to trust (setup passwordkess SSH).
* Created (but not finished) System->manage_authorized_keys() and moved the logic over to it from anvil-daemon.
* Changed the host types "dashboard" to "striker".
* Moved the following methods from 'System' to 'Get';
** System->get_host_type to Get->host_type
** System->get_bridges to Get->bridges
** System->get_free_memory to Get->free_memory
** System->get_os_type to Get->os_type
** System->get_uptime to Get->uptime
* Updated striker to include the host_uuid for the 'node1', 'node2' and (if chosen) 'dr1' when running a job manifest.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_ip_addresses() to search for an existing entry by 'ip_address_on_uuid' first, when possible.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished the saving of a "run manifest" job menu. Included filtering out potential machines already in other Anvil! systems from the select box and updating the password fields to not trigger a browser to save/auto-complete the field.
* Fixed a bug in Database->get_hosts() caused by the attempt to immediately return with a 0 if it had been called before. Now a check is made in ->insert_or_update_manifests() where the recursive loop was possible.
* Updated the RPM spec to v.33 after releasing .32 after the last commit. Also added the core requirement for perl-Data-Validate-Domain.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the anvils database table to have columns for traching which hosts are used as node 1, node 2 and the DR host.
* Updated Database->get_hosts() to check which, if any, Anvil! a given hosts is attached to.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got deleting of manifests done.
* Fixed a couple bugs from the _network to _ip variable rename.
* Fixed a bug where fence variables with double-quotes in them weren't being handled properly.
Signed-off-by: Digimer <digimer@alteeve.ca>
** Created Database->get_upses() and ->insert_or_update_upses().
** Created Striker->get_ups_data(). This parses the special 'ups_XXXX' strings.
* Updated Validate->is_domain() and added ->is_host_name() to use the Data::Validate::Domain module (which is now required in the core RPM).
* Started work on manifest handling.
* Sorted the language keys alphabetically.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Removed fences -> fence_type from the database schema, wasn't needed.
* Updated Striker->get_fence_data() to store data in the 'fence_data' parent hash so to not conflict with 'fences' used in Database->get_fences().
* Got the saving and loading of fence devices working.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added fonts to Striker's RPM list and to the anvil-striker RPM dependency list so that the terminal is actually useful.
Signed-off-by: Madison Kelly <digimer@neutron.digimer.ca>
* Fixed a bug (well, made a work-around for an issue without a known reproducer) where, on some occassion, a record will end up in the public table without being copied into the history schema. When this happens, the next resync would crash out because the resynd reads in the history table only. Now, when about to INSERT a record into the public schema during a resync, an explicit check is made to see if the record alread
y exists. If it does, the INSERT is instead redirected to the history schema.
* Cleaned up the fence agent metadata when displaying to a user, converting the shell codes to underline a string with square brackets instead. We also now replace newlines with <br /> tags. Lastly, to help fence_azure_arm's metadata description to display cleanly, a check is made to format the table correctly.
* Began work on the Striker menu for handling fence device management
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Striker->get_fence_data() that reads/parses the unified fence metadata file created by tools/striker-parse-fence-agents.
* Created the new 'fences' database table and Database->insert_or_update_fences() to handle it.
* Added hosts -> host_ipmi that will, later, store information on how to access the host's IPMI interface, when available.
* Sketched out how the new Install Manifests are going to work.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_variables() where, if 'update_value_only' was set but not variable_uuid was passed or could be found, an (incomplete) INSERT would be attempted.
* Added support for generating module metadata when setting up local repos on Striker.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->get_recipients() (from what used to be get_alert_recipients), as well as ->get_mail_servers() and ->insert_or_update_notifications().
* Renamed 'recipients -> notification_anvil_uuid' to 'notification_host_uuid'.
* Started work on scancore -> check_email.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started work on Striker's notification recipient management page. Cleaned up the variable names in the mail_server management function.
* Added recipients -> recipient_units column to the sql schema.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->insert_or_update_mail_servers() to insert/update entries in the 'mail_servers' table.
* Got more work done on the email server menu. It now shows the entered values, but not yet save the data.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created System->disable_daemon.
* Fixed a bug in Database->insert_or_update_bonds() where the bridge_uuid was an empty string instead of NULL.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'no_ping' to Database->connect() to disable pinging before connection, regardless of the anvil.conf setting.
* Created Network->read_nmcli() that reads, parses and stores the verbose output from 'nmcli'.
I can not properly explain in this commit message how much getting network manager working tripped me up. omg the complexity of what used to be such a simple process...
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_network_interfaces() to take the new 'link_only' and 'timestamp' parameters to support flushing out the cache file above.
* Updated anvil-daemon to run anvil-update-states when the database connection is lost. Also moved the 'handle_periodic_tasks()' function call to be conditional on there being a database connection.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where ip_addresses could break resync when 2+ machines had the same IP (ie: 192.168.122.1).
* Updated logging of DB transactions to show the DB host's IP instead of the UUID.
* Updated Get->date_and_time to take a 'use_utc' parameter to return the time using GMT time instead of the host's TZ.
* Updated anvil-daemon to periodically call tools/anvil-update-states. Also upadted anvil-daemon to delay daily jobs by 2 hours except for the dashboard with the highest sorted UUID to minimize dual runs of tasks that only need to run once per day per cluster.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added missing foreign key references to the SQL schema.
* Added support to tools/anvil-update-states to connect bonds to bridges, as appropriate.
* Finished the logic in test.pl to pull the network data (with connections between bridges, bonds and interfaces) needed for the WebUI.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in tools/anvil-update-states where the MAC of an interface that is the backup in an active-backup bond would be the MAC of the active member instead of its real MAC.
* Fixed a bug in Convert->add_commas() where a passed in value of '0' returned an empty string.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed 'bridges' -> 'bridge_mac' to 'bridge_mac_address' to be consstent with other MAC address column names.
* Finished Network->load_interfces().
* Updated anvil-update-states to check for interfaces under bridges that are missing their 'network_interface_bridge_uuid' reference UUID.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->get_hosts_info() (though it's not at all finished) that will write out a unified JSON file contain all data known about all hosts/Anvil! systems. This will be later used to create the WebUI parts.
* Also created, but also not finished, Network->load_interfces() that will work sort of like ->load_ups, but include all interfaces regardless of if they have an IP or not.
* Fixed a bug where the new bridge_interface_note parameter didn't exist in the Database->insert_or_update_bridge_interfaces() method.
* Updated anvil-update-states() to only write out the JSON/XML files if it's running on a dashboard. For nodes and DR hosts, it just needs to update the database.
* Created a new hook in anvil-daemon that will call tasks on a machine that is configured.
* As per RHEL 8.1 release notes, changed the package 'dnf-utils' to 'yum-utils' in the packages to load for install target repos.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'ip_address_note' to the 'ip_addresses' table as there was no column convenient for flagging as DELETEd.
* Added 'uuid' to Database->insert_or_update_file_locations() and ->insert_or_update_files(), and actually used it in all ->inser_or_update_X() methods.
* Added 'delete' as a parameter to Database->insert_or_update_ip_addresses() to allow simple deletion of a referenced IP address.
* Addressed a few 'undefined variable' errors.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->get_host_from_uuid() that takes a host UUID and returns the host's name.
* Reworked Network->find_matches() to return both the match's IP and subnet.
* Finished getting tools/striker-initialize-host to add all known peers to the target, using IPs on the target's available subnet.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where '$target' being preset to 'local' was causing bad calls to 'Remote->call'.
* Updated Storage->change_mode and -> change_owner to work locally and on remote hosts.
* Barely started work on striker->process_anvil_menu().
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added job parsing to tools/striker-parse-oui and tools/striker-scan-network, and enabled them in anvil-daemon.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Convert->time() where the suffix was long when it should have been short, and vice-versa.
* Updated Network->download() to check if the target file exists and, if so, to abort unless 'overwrite' is given or the existing file is 0-bytes long. Also updated it to not exit on immediate error after the wget call and instead check to see if a zero-byte file exists and remove it, if so.
* Created Validate->is_hex() to check hexadecimal strings.
* Updated Words->clean_spaces() to remove MS-DOS-style ^M cr/lf characters.
* Updated anvil-daemon to have a section for periodic tasks that run daily, and added striker-parse-oui as well as moved striker-manage-install-target refresh to that check. Also made those tools run on dashboards only.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->insert_or_update_bridge_interfaces() to handle updating the new bridge_interfaces database table that records which network interfaces are connected to which bridges.
* Added 'bridge_mac' and 'bridge_mtu' to the 'bridges' table.
* Started Server->map_network which will, eventually, try to map MAC addresses to IPs and record server -> vnetX -> bridge data. Made getting a server status target-dependent.
* Worked on anvil-update-states to parse and record bridge data.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Moved System->is_local to Network->is_local, and System->ping to Network->ping.
* Added a check to tools/striker-get-peer-data that will report if the target has Internet access or not.
* Cleaned up the form that prompts the user to enter their Red Hat credentials.
* Updated tools/anvil-manage-keys (and related code) to no longer distinguish by user. If a target is flagged as changed, it is removed from the root and all user's known_hosts files.
* Updated Storage->write_file() and ->update_file() to accept the 'backup' parameter to control if an file that exists is backed up before being updated/replaced.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated System->host_name to work locally and on remote targets.
* Renamed all 'hostname' instances to 'host_name' to standardize on a spelling throughout the program.
* Removed use of and dependency on 'hostname'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Get->host_uuid() where the call to get the host UUID from dmidecode was broken.
* Updated striker -> Initialize host to allow the user to set the host name of a node or host being initialized, allowing it to be registered with Red Hat under the proper name and make it easier to track which machine is which during initial Anvil! build.
* Fixed a few minor bugs with variable insertions into translated strings.
* Updated striker-initialize-host to use a progressive progress value rather than statically assigned steps.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a check to Remote->call() where, when a connect attempt fails because of a changed/bad key, it is reported as such to the user/logs and an entry is recorded in the state file.
* Started adding a Striker menu function showing users a list of bad keys in known_hosts files and the ability to remove old keys.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Bumped the logging in and fixed a compile-time bug in striker-prep-database.
* Bumped the anvil.spec release to .25.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Tools->refresh to reload anvil.conf in one call.
* Created Anvil::Tools::Network to hold network-related tasks.
** Created Network->is_remote() that tests to see if a string (containing a target) refers to the remote machine (versus a local machine). Updated all previous checks to use this new method.
** Moved Get->network_details() and Get->network() to the new Network module. Renamed Get->network() to Network->get_network().
** Made Network->get_ips() work locally and remotely.
** Created Network->find_matches() that compares two scanned machines IPs (via two previous calls to Network->get_ips())
* Created Database->manage_anvil_conf() that will add, update or remove a given database connection in a local or remote anvil.conf file.
* Fixed bugs in Storage->backup() where the bash calls were quite broken. I'm not sure how it ever worked before... x_x
* Updated anvil-daemon to not initialize a database unless it's running on dashboard. Also added a check at the startup of anvil-daemon where it will go into a loop waiting for a database to become available, re-reading anvil.conf each loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Remote->call where a shell call that ended in a newline would work, but throw an error and not get the return code.
* Created Database->get_job_details() which takes a job_uuid and returns the job details, if found.
* Fixed a bug in Jobs->update_progress() where 'clear' wasn't removing the old job_progress data.
* Added the parameters 'no_files' to skip stat'ing/recording non-directories, and 'search_for' which will set the parent directory in 'scan::searched' and stop scanning if found. This allows this method to act as a directory tree scanner and as a search engine.
* Created Striker->get_local_repo() that builds a repo file body suitable for adding to peers, nodes and DR hosts.
* Fixed bugs in the Striker WebUI related to initializing a target node / DR host.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated striker to no longer try to SSH to a remote machine. To enable this, we'd have to give apache a shell and an SSH key, which is dumb and dangerous when considered.
* Created tools/striker-get-peer-data which is meant to be invoked as the 'admin' user (via a setuid c-wrapper). It collects basic data about a target machine and reports what it finds on STDOUT. It gets the password for the target via the database.
* Updated anvil-daemon to check/create/update setuid c-wrapper(s), which for now is limited to call_striker-initialize-host.
* Created Anvil/Tools/Striker.pm to store Striker web-specific methods, including get_peer_data() which calls tools/striker-initialize-host via the setuid admin call_striker-initialize-host c-wrapper.
* In order to allow striker via apache to read a peer's anvil.version, which it can no longer do over SSH, any connection to a peer where the anvil.version is read is cached as /etc/anvil/anvil.<peer>.version. When Get->anvil_version is called as 'apache', this file is read instead.
* Updated Database->resync_databases() and ->_find_behind_databases() to ignore the 'states' table.
* Created tools/striker-initialize-host which will be called as a job to initialize a node/dr host.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up the striker->add_sync_peer() function to more clearly differentiate the ssh port from the pgsql port.
* Improved the HTML form to not have the browser treat host login fields as credentials to autofill or save.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created tools/anvil-check-memory to report how much RAM is used by a given program.
* Added documentation for some previously undocumented methods.
* Updated Database->archive_database() to take the 'tables' parameter.
* Updated Storage->scan_directory() to record a directory's mode and type, even when recursive isn't used.
* Finished System->check_memory().
* Updated ocf:alteeve:server to now NOT stop a DRBD resource unless 'stop_drbd_resources'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created System->active_lv() that, surprise, activates an inactive logical volume. Also created ->check_storage() that parses out the LVM data.
* Fixed a bug in tools/fence_pacemaker that was preventing it from compiling and running.
* Updated ocf:alteeve:server to validate the target server's storage.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_jobs() to use job_data when looking for a job uuid. Also fixed logging and adapted 'jobs::X' variable feeding to prevent them being undefined. Also made the search find jobs with the program name anywhere in the string, instead of just the start of the strong.
* Started work on Jobs->update_progress() to handle updating downloading file information.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the files table to add the file_mtime. In the future, if two versions of the same file exists on different machines, the one with the more recent mtime will be copied over the others.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished getting anvil-manage-files to find and process new files in /mnt/shared/incoming. Created a 'convert_mimetype' function to translate returned mimetype to a file type we care about.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed some bugs in Database->insert_or_update_files() and the 'files' table/procedure in the SQL schema.
* Got more work done on anvil-manage-files.
* Created Job->get_job_details().
* Added an executable check for files in Storage->scan_directory().
* Cleaned up some logging and switched to Job->get_job_details() in anvil-update-states and striker-configure-host.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started work of "Files" (replacement for the media library), including database tables, planned sync flow and web UI.
* Added a check for the /mnt/shared directories and create them as needed in the periodic anvil-daemon checks.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil.sql to add the new tables needed for alert mail delivery.
* Update anvil.sql and Database->initialize to now default the user to 'admin' and swap that out if needed, instead of using the #!variable!user!#' replacement variable.
* Started updating anvil.spec for EL8.
* Added support for 'striker::repo::extra-packages' which users can use to add additional packages to the Striker repositories.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Get->anvil_version where the version of local systems and remote systems differed in closing new lines.
* Fixed a bug in Database->insert_or_update_variables() where the 'debug' parameter wasn't working.
* Renamed System->determine_host_type -> System->get_host_type.
* Fixed a bug in System->get_uptime where there was a newline after the uptime integer.
* Updated anvil-daemon to track and record the state of the Install Target feature on Striker dashboards.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got anvil-manage-install-target finished creating config files and enabling daemons needed for PXE. Still untested in function though.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'sys::database::failed_connection_log_level' to allow silencing of log messages when a Striker peer database is not available.
* Started updating the .spec for the new release to add supported packages needed for PXE/dhcp/tftpboot.
* Added to repo tftpboot files as pulling them out of the packages and moving them into the right place relative to the modest size of adding them directly to our source wasn't justified.
* Created the still very very early 'tools/anvil-manage-firewall' tool.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up some logging.
* Made the "Reload" buttons work more sensibly and cleaned up some webui display stuff.
* Got deleting peers mostly working (well, it works, but then it goes into a loop thinking it needs to resync the now-gone database until the daemon restarts).
* Fixed a race condition bug where if a job exited between the time that anvil-daemon got a list of PIDs and when it checked to see if that specific pid was alive, a job that actually completed could be restarted.
* Added a loop check to anvil-manage-striker-peers where it would hold until a database connection to the newly added peer was available, preventing a condition where re-adding a peer (and so the host_uuid is in hosts) cause the job belonging to the peer to be recorded locally and then never synced to the peer.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'sys::log_date' which controls if the date and time is pre-pended to log entries.
* Created Get->host_name() which takes a host UUID and returns the 'host_name' from the 'hosts' table, if found.
* Cleaned up some HTML templates and logging.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database methods that can take the caller's file or line to append the local file and line.
* Updated Jobs methods to call Database->insert_or_update_jobs().
* Updated the remaining UPDATEs of 'jobs' table to use 'Database->refresh_timestamp()' for the 'modified_date'.
Signed-off-by: Digimer <digimer@alteeve.ca>
The resync of the databases was originally designed (on m2) with the expextation that any given column would have only one change per 'modified_date' time. That was never a great approach, but it worked in m2 and just bit me on m3. With job processing, for an example, the job_progress will change repeatedly in one pass, all with the same 'modified_date'. So only one record per run would resync. To fix this, the plan is to drop 'history_id' (and the procedure/trigger in pgsql to copy INSERT and UPDATEs to the history schema). The new plan is to use 'change_uuid' with a per-transaction UUID created in Database so that the per-DB 'history_id' is replaced with a per-update/insert UUID in 'change_uuid'. This will become the unique record used to sync databases, instead or 'modified_date'. To keep things consistent, 'modified_date' was renamed to 'change_date' to match 'change_uuid'. This work is very much "in progress" and not finished.
This commit also changes Get->uuid to use UUID::Tiny to create v4 UUIDs instead of making making a system call to 'uuidgen'. This sped up UUID generation by almost 100x.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the Database module to not sort or reorder the 'core_tables' array, and reordered them in the hash they're declared in.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a check to all 'Database->insert_or_update_*' methods to check if the passed-in reference UUID was found and return an empty string if not.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->resync_databases() where tables that pluralized with the suffix 'es' were not being singularized properly, so the '_uuid' column wasn't found and preventing resync of that table.
* Fixed a bug in System->maintenance_mode() and System->reboot_needed() where the variable read wasn't restricted to the local host UUID.
* Reordered the config and maintenance mode checks in striker so that configure is shown even if maintenance mode is somehow set without configuration being done.
* Updated the .spec for .16 RPM release.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_jobs() to also use the job_command when looking for an existing job (when a specific job_uuid was not included).
* Fixed a bug with a missing ? in striker->add_sync_peer function. Also updated it to not try to record the peer's job as it is unlikely the peer will be in hosts. Instead, the job_command to add the peer is appended to the local job't job_data and the updated anvil-manage-striker-peers looks for that at the end of the add and sync, and records the job once the peer's UUID is in 'hosts'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-configure-striker to use Job methods and reboot using anvil-manage-power. Also updated it to set/clear maintenance mode and mark a reboot required at the end of it's run just prior to reboot.
* Lots of log cleanup.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Job->clear() to clear the job_picked_up_by column. Created Job->get_job_uuid() to return the job_uuid of an unfinished job matching a given job_command string (if any found).
* Updated striker->process_power to log the user out after confirming a poweroff or reboot action.
* Added anvil-daemon --startup-only to not enter the main loop and exit.
* Finished getting poweroff and reboot working (though more testing needed).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished (for now) adding support for monitoring jobs while a node is in maintenance mode!
* Cleaned up the display of job data and redid how buttons (real and classed links) are displayed to be consistent.
* Fixed a bug in anvil-daemon where a disconnect wasn't being called between loops, causing DB connections to pile up.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started adding the display of running and recently finished jobs to Striker when in maintenance mode. Still lots to do.
* Started working on the logic for what will soon be Words->decypher_string in anvil-daemon to process strings stored as '<key>,!!<name1>!<value1>!!,...,!!<nameN>!<valueN>!!'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed 'database::locking' to 'sys::database::locking' to avoid collisions with 'database' keys.
* Fixed a problem with System->call where reidrects were missing the Proc::Simple method name.
* Updated anvil-daemon to check if there is no database connections on start-up, run prep-database if not, and try connecting again. If it still fails, exit. Also updated the main loop to reconnect to the database(s) and skip if non are available. Did more work on the keep_running() function.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->connect to take a specific UUID to attempt a connection to.
* Renamed some old 'sys::x' variables related to the database to 'sys::database::x' to conform better to coding standards.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Update Anvil::Tools->new() to access the parameters 'log_level', 'log_secure' and 'debug', streamlining the frequent calls to $anvil->Log->level and ->secure in program startup, and allowing the values to take effect during the ->new constructor.
* Passed 'debug' to child method calls in more places (still more to do though).
* Fixed a bug where 'test_table' wasn't set in the right place, causing the database to try to initialize repeatedly.
* Made Database->archive_database only run if called with root access.
* Now the number of database connections are stored in 'sys::db_connections' instead of checking the returned number, and that is cleared on disconnect.
* Started working more on 'anvil-daemon', including adding support for System->call being taking 'background', 'stderr_file' and 'stdout_file' paramters which, when set, used Proc::Simple to background the process.
* Did some more work on database archiving, though still far from done.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added another check and better error handling to Template->get() to print a more useful message if a template is found but fails to parse.
* Moved some strings into the words file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_network_interfaces where independent interfaces (not under a bridge or a bond) were not being saved.
* Continued working on improving Striker's network config jquery/form functions.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a typo in Database->insert_or_update_bridges().
* Added 'bond_mac_address' and 'bond_operational' to the bonds table.
* Gathered data needed for bonds in tools/anvil-update-states and got bonds recording successfully (but more testing needed).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Changed the database table ip_address_subnet to ip_address_subnet_mask for clarity.
* Added a check to tools/anvil-update-states to update bond entries instead of just interface entries (also not done).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created (but not yet tested) Database->insert_or_update_ip_addresses() and the associated ip_addresses database table to store IP address details and reference the interface they're on.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Account->encrypt_password to return a hash reference with keys matching to database column names for consistency sake,
* Renamed 'users -> user_password' to 'user_password_hash' for clarity.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Changed 'database:❌:...' so that 'x' is now the database host's UUID instead of a simple integer. This will simplify sync'ing configs. Also removed default entries, and made it so that anvil-prep-database injects the local config during first setup. Renamed Database->get_local_id to get_local_uuid and changed the 'id' parameter to 'uuid'. Changed Database->initialize's 'id' parameter to 'host_uuid'. The Database->query, Database->write, Database->_mark_database_as_behind and Database->_find_behind_databases methods had their 'id' parameter changed to 'uuid'.
* Added the 'remote_user' parameter to Get->anvil_version, System->ping and System->change_shell_user_password for conencting to remote targets.
* Added the 'remote_user' parameter to all internal Remote->call uses.
* Updated Storage->backup, Storage->copy_file, Storage->make_directory,
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where some '$anvil->{}' variables should have been '$anvil->data->{}'.
* Started merging message keys on 'error_xxxx', 'warning_xxxx', etc.
* The anvil-configure-network now configures the network. Commented out, the tool can reconfigure the entire network without a reboot, but a current issue with the post-configured system refusing to use the allocated interface as the default gateway is to be reviewed at a future time. For now, a closing reboot will be issued.
* Started creating 'anvil-change-password' that will update passwords, including apache (and configure .htpasswd when needed).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got anvil-configure-network writing out the new network config properly, but renaming already-active interfaces isn't working yet.
* Updated System->get_ips() to record the interface name of a given network by MAC address using 'sys::mac::<mac_address>::iface'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed some logging in Get->cgi() and generally cleaned up logging levels.
* Got striker to the point where the job to reconfigure the network is saved in the database and the dashboard goes offline until it is done.
* Created the start of the new anvil-configure-network tool.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'file' and 'line' arguments to the Database->insert_or_update_X methods to allow for the original caller's file and line number to be recorded in the SQL call logs.
* Cleaned up how logging to 'anvil.log' logging is handled.
* Updated anvil-update-states to ignore libvirt bridges and to manually set the speed and duplex of virtio network based interfaces.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug with resync, but others remain as resync is incomplete (at least for network_interfaces).
* Currently, tools/anvil-update-states is broken while working on the above issue.
* Reworked the jobs table and removed the units/anvil-jobs.service unit. Jobs will be invoked and backgrounded in all calls.
* Started adding missing hidden form fields.
* Updated the 'server' OCF resource agent version and metadata.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created a new tool (that may go away) for monitoring for network changes as quickly and with as few resources as possible.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added Get->anvil_version() to check the local or remote Anvil! version.
* Added a check in Database->connect() to see if a database server's Anvil! version matches the local version. If the versions don't match, the database is not used.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the 'debug' parameter to System->enable_daemon.
* Fixed a bug where the old 'Tools.sql' files was being referenced instead of the new 'anvil.sql'.
* Added the 'debug' parameter to Database->initialize and Database->write. Also made it enable the postgresql daemon when initializing the DB.
* Added the 'debug' parameter to Get->host_uuid.
* Fixed the old anvil.conf variable from defaults::log::db_transactions to sys::database::log_transactions.
* Fixed a bad replacement variable name in anvil.sql.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the 'debug' parameter to System->call(). Also added a check to make sure that the called executable exists.
* Added the 'debug' parameter to System->start_daemon().
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed display issues when showing a summary of what will be done if the user confirms the reconfiguration of the Striker.
Signed-off-by: Digimer <digimer@alteeve.ca>
We've decided to give up on trying to keep ScanCore, AN::Tools and Striker as three separate things. We had originally hoped to make ScanCore easily separatable from the Anvil!, but this was adding increasing complexity to the project and complexity is the enemy of reliability.
In this release, AN::Tools becomes Anvil::Tools, all configuration files move to /etc/anvil and all programs and data files move to /usr/sbin/anvil. Words files are now merged, as are SQL schemas (ScanCore agents will still maintain their own, later). The journald tag has changed from 'an-tools' to 'anvil'.
Other changes;
* Tools.t has been updated to handle existing tests. New methods and parameters still need to have tests added though.
* Added a simple test.pl script used for testing things outside the main program. It will be removed before final release.
* Added the simple 'watch_logs' bash script to more easily tail output.
Signed-off-by: Digimer <digimer@alteeve.ca>
