* Updated scan-cluster to get the CIB from pcs instead of reading the CIB from disk.
* Updated anvil-daemon to always call striker-prep-database at log level 2 while trying to find the cause of rare postgres config failures. Also updated striker-prep-database to use the new method of initializing the DB.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed the special job status 'scancore_startup' to 'anvil_startup', given it's handled by anvil-daemon.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the 'print' parameter to Log->variables() to allow printing to STDOUT when set.
* Renamed Network->check_bonds() to Network->check_networks() in anticipation of adding bridge monitoring / repair to it later.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-daemon to call Network->check_bonds() with 'all' on startup, then woth 'down_only' once per minute to try to heal down'ed bonds.
* Updated anvil-watch-bonds to take a 'run-once' switch and exit after one report, if set.
Signed-off-by: Digimer <digimer@alteeve.ca>
* WIP - Continuing work on the new anvil-manage-server tool.
* Updated Database->get_anvils() to load information on the files available on each Anvil! system.
* Updated Database->insert_or_update_network_interfaces() to no longer take the 'timestamp' parameter.
* Removed all logging from Database->refresh_timestamp() to speed it up, given how often it will be called now.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-daemon to have a new function called "handle_special_cases" called during startup that does any weird bug mitigation required. For now, this is used to mitigate against rhbz#1961562, though certainly it will be used for other reasons later.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a problem with Database->insert_or_update_variables() where variable_source_uuid being set to an empty string wasn't converted to NULL.
* Fixed Database->locking() where the way the lock variable was set was rather broken.
* Created Striker->check_httpd_conf() which configured apache to handle the integration of the new WebUI for Anvil! management with the existing WebUI.
* Updated System->update_hosts() to specifically set the 127.0.0.1 and ::1 lines to handle how cloud-init overrides /etc/hosts and breaks CI/CD tests.
* Removed the old index.html as it's now used for the new WebUI.
* Began work on removing DB connection requirements from ocf:alteeve:server.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Bumped scancore's scan delay from 30 seconds to 60.
* Shorted the age-out time to 24 hours and again boosted the archive thresholds. As we get a feel for the amount of data collected on multi-Anvil! systems over time, we may continue to tune this.l
* Moved Database->archive_database() to be called daily by anvil-daemon, instead of during '->connect' calls.
* Added locking to Database->_age_out_data to avoid resyncs mid-purge. Also moved the power, temperature and ip_address columns into the same 'to_clean' hash as it was duplicate logic.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->_age_out_data() to check for certain scan agent tables and, for those found, purge out old records. This should go a long way to keeping the database data responsive.
* Fixed a bug in Jobs->update_progress() where the 'job_picked_up_by' column was being set to '0' instead of '$$' when clearing the job.
* Fixed a bug in System->update_hosts() where '127.0.0.1' would be used in hosts for the actual host name.
* Updated the default trigger, count and division values in anvil.conf to 100,000, 50,000 and 75,000 respectively. In combination with the aging of data, this should go a long way to minimizing database sizes and overheads.
* Updated anvil-daemon to call $anvil->Database->_age_out_data(); in it's daily tasks.
* Updated various striker-X tools to specifically request a DB resync on Database->connect calls.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->_age_out_data() to delete records from the database that are old enough to no longer be useful. This is designed to significantly reduce the size of the database, allowing a better focus on performance.
* Changed Database->connect() to default to NOT check for resync, reworking the old 'no_resync' to 'check_for_resync', so that resync checks happen on demard, instead of by default.
* Updated get_tables_from_schema() to now allow 'schema_file' to be set to 'all', which then loads the schema files of all scan agents as well as the core anvil schema file. Fixed a bug where commented out tables were being counted.
* Re-enabled triggering resyncs on 'last_updated' differences.
* Fixed a bug in scan-ipmitool where the history_id column in history.scan_ipmitool_value was incorrect.
* Created a new tool called striker-show-db-counts that shows the number of records in all public and history schema tables for all databases.
* Updated anvil-update-states to detect when a libvirtd NAT'ed bridge exists and to delete it when found.
Signed-off-by: Digimer <digimer@alteeve.ca>
* DRBD is now configured to a ping-timeout of 3 seconds.
* Created Log->switches() that returnes the command line switches used by Anvil! tool command line calls based on the active log levels / secure logging. Appended this to all invocations of our tools.
* Updated Database->resync_databases() to now only skip 'jobs' and 'variables' tables with less than 10 record differences. All other differences will trigger a resync.
* Created System->_check_anvil_conf() that, as you might guess, checks in anvil.conf exists and created it (using defaults), if not. It also checks to see if the 'admin' group and user exists and creates them, if not.
* Updated anvil-daemon to check anvil.conf on start up and in each loop. Created the function check_journald() that checks (and sets, if needed) that journald logging is persistent.
* Made striker-manage-peers to check_if_configured on the Database->connect() when updating anvil.conf and the target UUID is the local machine. Also created a loop to make the reconnection a lot more robust.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Changed the alteeve repo RPM to the new cimmunity/enterprise repo
* Fixed a bug where 'fence_data::updated' was causing the fences web page to break.
* Fixed a bug in Database->insert_or_update_network_interfaces() where certain interfaces were being repeatedly added to the database.
* Fixed a bug in Database->_find_behind_databases() was marking DBs as behind even though they had less than 10 columns off.
* Fixed a bug in Get->host_name() where, if the host name was changed on disk but the environment variable was still the old name, it would cause the hostname to waffle back and forth and cause constant updated to /etc/hosts.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a new parameter to Database->connect() called 'no_resync' that, if set, prevents a resync check being performed. Updated ->resync_databases() to find a uuid_column where the table name ends in 'ies' and the UUID column is 'y_uuid'. Updated ->resync_databases() to not fire on updated table age anymore, and to trigger only if the number of rows differ in a given table by more than 10.
* Updated Log->entry() to prefix a tool's name, when the new 'log::scan_agent' value is set. Also set this value in ScanCore->agent_startup(), to help differentiate log entries.
* Fixed a bug in scancore's main loop where it logged the sleep message at the start of the run.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created DRBD->check_if_syncsource() and ->check_if_synctarget() that return '1' if the target host is currently SyncSource or SyncTarget for any resource, respectively.
* Updated DRBD->update_global_common() to return the unified-format diff if any changes were made to global-common.conf.
* Created ScanCore->check_health() that returns the health score for a host. Created ->count_servers() that returns the number of servers on a host, how much RAM is used by those servers and, if available, the estimated migration time of the servers. Updated ->check_temperature() to set/clear/return the time that a host has been in a warning or critical temperature state.
* Finished ScanCore->post_scan_analysis_node()!!! It certainly has bugs, and much testing is needed, but the logic is all in place! Oh what a slog that was... It should be far more intelligent than M2 though, once flushed out and tested.
* Created Server->active_migrations() that returns '1' if any servers are in a migration on an Anvil! system. Updated ->migrate_virsh() to record how long a migration took in the "server::migration_duration" variable, which is averaged by ScanCore->count_servers() to estimate migration times.
* Updated scan-drbd to check/update the global-common.conf file's config at the end of a scan.
* Updated ScanCore itself to not scan when in maintenance mode. Also updated it to call 'anvil-safe-start' when ScanCore starts, so long as it is within ten minutes of the host booting.
Signed-off-by: Digimer <digimer@alteeve.ca>
* The get_mmeory endpoint was completed.
* The get_replicated_storage endpoint was completed, though it requires testing and likely has issues.
To prepare for the get_status endpoint work, I needed to update ScanCore and modules to track the host_status. This commit contains the work needed for this.
* Updated ScanCore->post_scan_analysis_striker() to use configured fence devices (except PDUs) to check if a target host is off or on, in there is no host_ipmi interface. In all cases, if a machine can be confirmed on or off, the host_status is now updated.
* To support the above fence based power checks, updated scan-cluster to store the on-disk CIB in the new scan_cluster -> scan_cluster_cib colume.
* Updated ScanCore->parse_cib() to map stonith primitive IDs to fence agents. Updated ->parse_crm_mon() to not call if the executable doesn't exist to avoid unhelpful error messages in the logs when called from a Striker.
* Update DRBD->gather_data() to get the size data from /sys/block/drbd<minor>/size' x '/sys/block/drbd<minor>/queue/logical_block_size so it works when a device is Secondary (and can't be promoted).
* Updated Database->get_hosts_info() to record the short host name as well as the stored host name. Created ->update_host_status() as a wrapper to ->insert_or_update_hosts() that only updates the host status.
* Updated anvil-join-anvil to disabled ksm and ksmtuned daemons.
* Updated scancore and anvil-daemon to set the host_status to 'online' on startup.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished initial Striker setup in tools/striker-auto-initialize-all. Started working on peering.
* Cleaned up the handling of converting UIDs to user names in Remote->add_target_to_known_hosts() and ->_call_ssh_keyscan().
* Did a bunch of white-space/alignment cleanup.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Made the error reported by Remote->call() more verbose when called without 'target' being set.
* Updated anvil-daemon to not call jobs more that once per minute.
* Started work on striker-auto-initialize-all, still very far from complete.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Get->os_type() to use 'cat' instead of Storage->read_file() because 'rsync' may not be available when it is called during striker-initialize-host calls.
* Updated Database methods to skip 'oui' and 'state' during resync.
* Updatedb striker-initialize-host to detect when it's initializing a CentOS Stream Node / DR Host and enable the HA repo.
* Created the tools/striker-auto-initialize-all tool, which is very much incomplete, that will allow for the rapid creation of a full Anvil! from freshly installed machines autonomously.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_temperature() to accespt a 'delete' parameter (which, surprise, deletes a record).
* Updated (but not yet tested) the RPM .spec to require that 'core' and the other three packages are required to be the same version.
* Updated scan-ipmitool and scan-storcli scan agents to now delete temperature data belonging to lost sensors.
* Fixed tools/striker-manage-install-target to add multiple missing packages.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created (but not finished) scan-apc-pdu
* Added support to tracking maintenance-mode for nodes in Cluster->parse_cib
* Created Remote->read_snmp_oid().
* Created Server->get_definition.
* Updated Server->get_status() to write-out server XML files on-demand.
* Finished scan-cluster.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed the 'defitintions' table to 'server_definitions' to clarify the purpose, and made all the 'server' columns have then 'not null' constraint.
* Created Database->insert_or_update_servers(), ->get_servers(), ->insert_or_update_server_definitions() and ->get_server_definitions().
* Updated scancore, anvil-daemon, and scan agents to not run unless they're run with root privs.
* Got scan-server to update the servers / server_definition tables and the on-disk file when needed.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Tools->_set_defaults where the order the tables were sync'ed it caused primary/foreign keys would trigger DB errors when resync'ing in some cases.
* Created Database->log_connections to make it easier to log which databases are actively in use and other data about the connections.
* Fixed bugs in striker-manage-peers that (partly because of the above bugs) failed to connect to new peers properly.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up a lot of logging.
* Updated Cluster->parse_cib() to track if a stonith device has 'delay' set.
* Got a lot more work done on anvil-join-anvil's stonith processing, but it still isn't complete. Updated it to change shell user passwords as well.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed Database->get_ip_addresses() to clear stale IP addresses.
* Finished (for now, more testing needed) System->configure_ipmi! Also created System->test_ipmi() that handles trying lanplus and various password lengths, updating hosts -> host_ipmi on successful check.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got anvil-join-anvil to the point where is initializes and starts the cluster.
* Deleted the old ssh key handling logic in anvil-daemon.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Update striker manifest run to add an entry into the 'anvils' table, and pass the anvil_uuid to the jobs rather than the various host_uuid's.
* Fixed a bug in the 'anvils' SQL procedure that copied data into the history schema (a few columns were missing).
* Updated anvil-configure-host to reboot when finished to be certain network changes have taken effect. Also updated the handling of virsh bridges to delete the autostart symlinks if libvirtd daemon isn't running.
* Added some logic to anvil-daemon to call 'anvil-update-states' with the -v{1,3} flag depending on the active debug level.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated System->generate_state_json() where when the full host name was short, it wouldn't set the short host name properly.
* Fixed a bug in 'tools/anvil-manage-power' where the node wouldn't mark the reboot as complete. Resolves issue #11.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated 'variables' -> 'variable_source_uuid' to type 'uuid' and removed the 'not null' constraint.
* Updated Database->insert_or_update_variables() to check/update 'variables_source_table' and 'variables_source_uuid'.
* Created the 'trusts' database table which will, when done, tell anvil-daemon which users@machines to trust (setup passwordkess SSH).
* Created (but not finished) System->manage_authorized_keys() and moved the logic over to it from anvil-daemon.
* Changed the host types "dashboard" to "striker".
* Moved the following methods from 'System' to 'Get';
** System->get_host_type to Get->host_type
** System->get_bridges to Get->bridges
** System->get_free_memory to Get->free_memory
** System->get_os_type to Get->os_type
** System->get_uptime to Get->uptime
* Updated striker to include the host_uuid for the 'node1', 'node2' and (if chosen) 'dr1' when running a job manifest.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug (well, made a work-around for an issue without a known reproducer) where, on some occassion, a record will end up in the public table without being copied into the history schema. When this happens, the next resync would crash out because the resynd reads in the history table only. Now, when about to INSERT a record into the public schema during a resync, an explicit check is made to see if the record alread
y exists. If it does, the INSERT is instead redirected to the history schema.
* Cleaned up the fence agent metadata when displaying to a user, converting the shell codes to underline a string with square brackets instead. We also now replace newlines with <br /> tags. Lastly, to help fence_azure_arm's metadata description to display cleanly, a check is made to format the table correctly.
* Began work on the Striker menu for handling fence device management
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_variables() where, if 'update_value_only' was set but not variable_uuid was passed or could be found, an (incomplete) INSERT would be attempted.
* Added support for generating module metadata when setting up local repos on Striker.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got more work done on confirming the user's request to setup the network of a node or DR host.
* Reworked network select boxes to sort by the network name instead of the MAC address.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_network_interfaces() to take the new 'link_only' and 'timestamp' parameters to support flushing out the cache file above.
* Updated anvil-daemon to run anvil-update-states when the database connection is lost. Also moved the 'handle_periodic_tasks()' function call to be conditional on there being a database connection.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where ip_addresses could break resync when 2+ machines had the same IP (ie: 192.168.122.1).
* Updated logging of DB transactions to show the DB host's IP instead of the UUID.
* Updated Get->date_and_time to take a 'use_utc' parameter to return the time using GMT time instead of the host's TZ.
* Updated anvil-daemon to periodically call tools/anvil-update-states. Also upadted anvil-daemon to delay daily jobs by 2 hours except for the dashboard with the highest sorted UUID to minimize dual runs of tasks that only need to run once per day per cluster.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a couple logging bugs in System->call().
* Fixed a bug in anvil-daemon where it was trying to setup setuid-C wrappers on non-dashboards.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in System->generate_state_json() where interfaces connected to a bridge were constantly having their 'network_interface_bond_uuid' cleared and reset.
* Finished (for now) the jquery code to update the network interface list when preparing the network interface configuration of a new node or DR host.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->get_hosts_info() (though it's not at all finished) that will write out a unified JSON file contain all data known about all hosts/Anvil! systems. This will be later used to create the WebUI parts.
* Also created, but also not finished, Network->load_interfces() that will work sort of like ->load_ups, but include all interfaces regardless of if they have an IP or not.
* Fixed a bug where the new bridge_interface_note parameter didn't exist in the Database->insert_or_update_bridge_interfaces() method.
* Updated anvil-update-states() to only write out the JSON/XML files if it's running on a dashboard. For nodes and DR hosts, it just needs to update the database.
* Created a new hook in anvil-daemon that will call tasks on a machine that is configured.
* As per RHEL 8.1 release notes, changed the package 'dnf-utils' to 'yum-utils' in the packages to load for install target repos.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'ip_address_note' to the 'ip_addresses' table as there was no column convenient for flagging as DELETEd.
* Added 'uuid' to Database->insert_or_update_file_locations() and ->insert_or_update_files(), and actually used it in all ->inser_or_update_X() methods.
* Added 'delete' as a parameter to Database->insert_or_update_ip_addresses() to allow simple deletion of a referenced IP address.
* Addressed a few 'undefined variable' errors.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the loop detection logic in Log->entry where processing large strings was triggering it when it shouldn't.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where '$target' being preset to 'local' was causing bad calls to 'Remote->call'.
* Updated Storage->change_mode and -> change_owner to work locally and on remote hosts.
* Barely started work on striker->process_anvil_menu().
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated striker-scan-network to only run once per day unless --force or a given --network is used. This avoids repeated scans when the anvil-daemon restarts frequently for whatever reason.
* Fixed (for real this time) Convert->time's handling of the 'long' parameter.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added job parsing to tools/striker-parse-oui and tools/striker-scan-network, and enabled them in anvil-daemon.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Convert->time() where the suffix was long when it should have been short, and vice-versa.
* Updated Network->download() to check if the target file exists and, if so, to abort unless 'overwrite' is given or the existing file is 0-bytes long. Also updated it to not exit on immediate error after the wget call and instead check to see if a zero-byte file exists and remove it, if so.
* Created Validate->is_hex() to check hexadecimal strings.
* Updated Words->clean_spaces() to remove MS-DOS-style ^M cr/lf characters.
* Updated anvil-daemon to have a section for periodic tasks that run daily, and added striker-parse-oui as well as moved striker-manage-install-target refresh to that check. Also made those tools run on dashboards only.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished the detection of and handling of initialization of a host when the host has no Internet access.
* Disabled (for now) anvil-daemon's check_ssh_keys function.
* Fixed a couple small bugs elsewhere.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated System->host_name to work locally and on remote targets.
* Renamed all 'hostname' instances to 'host_name' to standardize on a spelling throughout the program.
* Removed use of and dependency on 'hostname'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Remote->call() to detect when a connection fails because the target's known_hosts entry has changed. Still need to add the function to report this to the user.
* Fixed a bug where new-lines in Words->parse_banged_string() where a double-banged word string's variable value would cause an infinite loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Tools->refresh to reload anvil.conf in one call.
* Created Anvil::Tools::Network to hold network-related tasks.
** Created Network->is_remote() that tests to see if a string (containing a target) refers to the remote machine (versus a local machine). Updated all previous checks to use this new method.
** Moved Get->network_details() and Get->network() to the new Network module. Renamed Get->network() to Network->get_network().
** Made Network->get_ips() work locally and remotely.
** Created Network->find_matches() that compares two scanned machines IPs (via two previous calls to Network->get_ips())
* Created Database->manage_anvil_conf() that will add, update or remove a given database connection in a local or remote anvil.conf file.
* Fixed bugs in Storage->backup() where the bash calls were quite broken. I'm not sure how it ever worked before... x_x
* Updated anvil-daemon to not initialize a database unless it's running on dashboard. Also added a check at the startup of anvil-daemon where it will go into a loop waiting for a database to become available, re-reading anvil.conf each loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated striker to no longer try to SSH to a remote machine. To enable this, we'd have to give apache a shell and an SSH key, which is dumb and dangerous when considered.
* Created tools/striker-get-peer-data which is meant to be invoked as the 'admin' user (via a setuid c-wrapper). It collects basic data about a target machine and reports what it finds on STDOUT. It gets the password for the target via the database.
* Updated anvil-daemon to check/create/update setuid c-wrapper(s), which for now is limited to call_striker-initialize-host.
* Created Anvil/Tools/Striker.pm to store Striker web-specific methods, including get_peer_data() which calls tools/striker-initialize-host via the setuid admin call_striker-initialize-host c-wrapper.
* In order to allow striker via apache to read a peer's anvil.version, which it can no longer do over SSH, any connection to a peer where the anvil.version is read is cached as /etc/anvil/anvil.<peer>.version. When Get->anvil_version is called as 'apache', this file is read instead.
* Updated Database->resync_databases() and ->_find_behind_databases() to ignore the 'states' table.
* Created tools/striker-initialize-host which will be called as a job to initialize a node/dr host.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in System->get_ips() where DHCP-assigned IPs were not being parsed properly to get the default gateway.
* Added the alteeve-el8-repo to the kickstart files install package list.
* Updated anvil-daemon to sleep 2 seconds between loops, instead of 1. Added a check to 'check_firewall' to not run until after the system has been configured.
* Quieted a lot of logging.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated package list to fix changed dependencies from RHEL 8 beta to final.
* Changed anvil_daemon to only check DHCP once per minute instead of every loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started work of "Files" (replacement for the media library), including database tables, planned sync flow and web UI.
* Added a check for the /mnt/shared directories and create them as needed in the periodic anvil-daemon checks.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed a couple Striker-only tools to use the 'striker' prefix instead of 'anvil'.
* Updated the core_tables list.
* Renamed 'sys::log::main' to 'sys::log::file'.
* Fixed some "Back" and "Refresh" links.
* Started planning out the file sync system.
* Started work on the Anvil! setup / host prep system.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started work on a "Jobs" button on the Striker UI to be able to see the progress of jobs that are running in the background.
* Updated the Help icon and added the jobs (tasks) icons.
* Made logging around dhcpd more verbose to help figure out why it's auto-running after initial configuration.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a 'test' parameter to Log->entry, Storage->make_directory and Words->key to help debug in places that Log->x may not be usable.
* Converted many $anvil->Log->x calls to print if $test to help prevent recursive loops, but not all fixed yet.
* Added the new 'host_keys' database table to the schema for a possible new feature of removing passwords in favour if machines adding peers' public keys to their authorized_hosts file.
* Cleaned up the opening calls to $anvil->Tools->new() in most tools.
* Cleaned up some variables in tools/anvil-update-states after reading their values from files (clean trailing newlines).
Signed-off-by: Digimer <digimer@alteeve.ca>
* The 'notes' file has a lot of RHEL8 migration notes added, including RPM build orders.
* The anvil.spec file has switched the source from 'master.tar.gz' to 'anvil-3.0b.tar.gz' and moved the source to our webserver. Updated the dependencies as well.
* Updated anvil.sql to add the 'anvils' table and fixed some SQL schema problems.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-daemon to re-read the main words file on each loop.
* Updated scancore to read and purge each scan agent's words file between invocations.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got scancore scanning the agents directory, and properly holding on startup until at least one database is available (instead of exiting), and holding on startup until the local system is configured.
* Created the skeleton of the first scan agent; scan-network.
* Fixed a bug in Storage->check_md5sums() where dynamically loaded modules, loaded after the initial md5sum calcs, would cause the calling daemon to exit (possibly on every invocation).
* Created the scancore.README that will eventually be the main scan agent guide / API document.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started expanding Alert->register_alert() to actually implement it.
* Improved handling errors in Words->key().
* Started work on Striker's "Anvil!" menu section. Also cleaned up the power handling.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in the PXE default config path to install.img.
* Added tftp to the BCN firewall template.
* Fixed a bug in anvil-daemon / striker-manage-install-target where config files weren't being updated regularly (only when repo updates happened).
* Removed an RPM from striker-manage-install-target that is no longer available on F28.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Log->entry() to accept 'print => [0|1]' to send a log message to STDOUT (minus prefix) to avoid tools that were repeatedly calling print and Log->entry back to back.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Words->parse_banged_string where some variable strings were not being cleared, causing infinite loops.
* Added job progress reporting in striker-manage-install-target, and made it only refresh the RPM repo when '--refresh' is specified (with --force now forcing the issue). This was done to allow adding it into anvil-daemon in such a way that it would only update the RPM repo once a day.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Get->anvil_version where the version of local systems and remote systems differed in closing new lines.
* Fixed a bug in Database->insert_or_update_variables() where the 'debug' parameter wasn't working.
* Renamed System->determine_host_type -> System->get_host_type.
* Fixed a bug in System->get_uptime where there was a newline after the uptime integer.
* Updated anvil-daemon to track and record the state of the Install Target feature on Striker dashboards.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'sys::database::failed_connection_log_level' to allow silencing of log messages when a Striker peer database is not available.
* Started updating the .spec for the new release to add supported packages needed for PXE/dhcp/tftpboot.
* Added to repo tftpboot files as pulling them out of the packages and moving them into the right place relative to the modest size of adding them directly to our source wasn't justified.
* Created the still very very early 'tools/anvil-manage-firewall' tool.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Jobs->update_progress to take 'picked_up_by' as an optional parameter, defaulting to '$$' (the caller's PID).
* Created System->get_uptime() to return the current uptime in seconds.
* Added a delay to anvil-manage-power to not proceed with a reboot if the uptime is less than 600 seconds. This way, if any future bug causes an infinite reboot, there will be more time to determine what's wrong and debug the system between reboots.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up some logging.
* Made the "Reload" buttons work more sensibly and cleaned up some webui display stuff.
* Got deleting peers mostly working (well, it works, but then it goes into a loop thinking it needs to resync the now-gone database until the daemon restarts).
* Fixed a race condition bug where if a job exited between the time that anvil-daemon got a list of PIDs and when it checked to see if that specific pid was alive, a job that actually completed could be restarted.
* Added a loop check to anvil-manage-striker-peers where it would hold until a database connection to the newly added peer was available, preventing a condition where re-adding a peer (and so the host_uuid is in hosts) cause the job belonging to the peer to be recorded locally and then never synced to the peer.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'sys::log_date' which controls if the date and time is pre-pended to log entries.
* Created Get->host_name() which takes a host UUID and returns the 'host_name' from the 'hosts' table, if found.
* Cleaned up some HTML templates and logging.
Signed-off-by: Digimer <digimer@alteeve.ca>
The resync of the databases was originally designed (on m2) with the expextation that any given column would have only one change per 'modified_date' time. That was never a great approach, but it worked in m2 and just bit me on m3. With job processing, for an example, the job_progress will change repeatedly in one pass, all with the same 'modified_date'. So only one record per run would resync. To fix this, the plan is to drop 'history_id' (and the procedure/trigger in pgsql to copy INSERT and UPDATEs to the history schema). The new plan is to use 'change_uuid' with a per-transaction UUID created in Database so that the per-DB 'history_id' is replaced with a per-update/insert UUID in 'change_uuid'. This will become the unique record used to sync databases, instead or 'modified_date'. To keep things consistent, 'modified_date' was renamed to 'change_date' to match 'change_uuid'. This work is very much "in progress" and not finished.
This commit also changes Get->uuid to use UUID::Tiny to create v4 UUIDs instead of making making a system call to 'uuidgen'. This sped up UUID generation by almost 100x.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the Database module to not sort or reorder the 'core_tables' array, and reordered them in the hash they're declared in.
Signed-off-by: Digimer <digimer@alteeve.ca>
