* Updated Database->insert_or_update_temperature() to accespt a 'delete' parameter (which, surprise, deletes a record).
* Updated (but not yet tested) the RPM .spec to require that 'core' and the other three packages are required to be the same version.
* Updated scan-ipmitool and scan-storcli scan agents to now delete temperature data belonging to lost sensors.
* Fixed tools/striker-manage-install-target to add multiple missing packages.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created (but not finished) scan-apc-pdu
* Added support to tracking maintenance-mode for nodes in Cluster->parse_cib
* Created Remote->read_snmp_oid().
* Created Server->get_definition.
* Updated Server->get_status() to write-out server XML files on-demand.
* Finished scan-cluster.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed the 'defitintions' table to 'server_definitions' to clarify the purpose, and made all the 'server' columns have then 'not null' constraint.
* Created Database->insert_or_update_servers(), ->get_servers(), ->insert_or_update_server_definitions() and ->get_server_definitions().
* Updated scancore, anvil-daemon, and scan agents to not run unless they're run with root privs.
* Got scan-server to update the servers / server_definition tables and the on-disk file when needed.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Tools->_set_defaults where the order the tables were sync'ed it caused primary/foreign keys would trigger DB errors when resync'ing in some cases.
* Created Database->log_connections to make it easier to log which databases are actively in use and other data about the connections.
* Fixed bugs in striker-manage-peers that (partly because of the above bugs) failed to connect to new peers properly.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up a lot of logging.
* Updated Cluster->parse_cib() to track if a stonith device has 'delay' set.
* Got a lot more work done on anvil-join-anvil's stonith processing, but it still isn't complete. Updated it to change shell user passwords as well.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed Database->get_ip_addresses() to clear stale IP addresses.
* Finished (for now, more testing needed) System->configure_ipmi! Also created System->test_ipmi() that handles trying lanplus and various password lengths, updating hosts -> host_ipmi on successful check.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got anvil-join-anvil to the point where is initializes and starts the cluster.
* Deleted the old ssh key handling logic in anvil-daemon.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Update striker manifest run to add an entry into the 'anvils' table, and pass the anvil_uuid to the jobs rather than the various host_uuid's.
* Fixed a bug in the 'anvils' SQL procedure that copied data into the history schema (a few columns were missing).
* Updated anvil-configure-host to reboot when finished to be certain network changes have taken effect. Also updated the handling of virsh bridges to delete the autostart symlinks if libvirtd daemon isn't running.
* Added some logic to anvil-daemon to call 'anvil-update-states' with the -v{1,3} flag depending on the active debug level.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated System->generate_state_json() where when the full host name was short, it wouldn't set the short host name properly.
* Fixed a bug in 'tools/anvil-manage-power' where the node wouldn't mark the reboot as complete. Resolves issue #11.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated 'variables' -> 'variable_source_uuid' to type 'uuid' and removed the 'not null' constraint.
* Updated Database->insert_or_update_variables() to check/update 'variables_source_table' and 'variables_source_uuid'.
* Created the 'trusts' database table which will, when done, tell anvil-daemon which users@machines to trust (setup passwordkess SSH).
* Created (but not finished) System->manage_authorized_keys() and moved the logic over to it from anvil-daemon.
* Changed the host types "dashboard" to "striker".
* Moved the following methods from 'System' to 'Get';
** System->get_host_type to Get->host_type
** System->get_bridges to Get->bridges
** System->get_free_memory to Get->free_memory
** System->get_os_type to Get->os_type
** System->get_uptime to Get->uptime
* Updated striker to include the host_uuid for the 'node1', 'node2' and (if chosen) 'dr1' when running a job manifest.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug (well, made a work-around for an issue without a known reproducer) where, on some occassion, a record will end up in the public table without being copied into the history schema. When this happens, the next resync would crash out because the resynd reads in the history table only. Now, when about to INSERT a record into the public schema during a resync, an explicit check is made to see if the record alread
y exists. If it does, the INSERT is instead redirected to the history schema.
* Cleaned up the fence agent metadata when displaying to a user, converting the shell codes to underline a string with square brackets instead. We also now replace newlines with <br /> tags. Lastly, to help fence_azure_arm's metadata description to display cleanly, a check is made to format the table correctly.
* Began work on the Striker menu for handling fence device management
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_variables() where, if 'update_value_only' was set but not variable_uuid was passed or could be found, an (incomplete) INSERT would be attempted.
* Added support for generating module metadata when setting up local repos on Striker.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got more work done on confirming the user's request to setup the network of a node or DR host.
* Reworked network select boxes to sort by the network name instead of the MAC address.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_network_interfaces() to take the new 'link_only' and 'timestamp' parameters to support flushing out the cache file above.
* Updated anvil-daemon to run anvil-update-states when the database connection is lost. Also moved the 'handle_periodic_tasks()' function call to be conditional on there being a database connection.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where ip_addresses could break resync when 2+ machines had the same IP (ie: 192.168.122.1).
* Updated logging of DB transactions to show the DB host's IP instead of the UUID.
* Updated Get->date_and_time to take a 'use_utc' parameter to return the time using GMT time instead of the host's TZ.
* Updated anvil-daemon to periodically call tools/anvil-update-states. Also upadted anvil-daemon to delay daily jobs by 2 hours except for the dashboard with the highest sorted UUID to minimize dual runs of tasks that only need to run once per day per cluster.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a couple logging bugs in System->call().
* Fixed a bug in anvil-daemon where it was trying to setup setuid-C wrappers on non-dashboards.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in System->generate_state_json() where interfaces connected to a bridge were constantly having their 'network_interface_bond_uuid' cleared and reset.
* Finished (for now) the jquery code to update the network interface list when preparing the network interface configuration of a new node or DR host.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->get_hosts_info() (though it's not at all finished) that will write out a unified JSON file contain all data known about all hosts/Anvil! systems. This will be later used to create the WebUI parts.
* Also created, but also not finished, Network->load_interfces() that will work sort of like ->load_ups, but include all interfaces regardless of if they have an IP or not.
* Fixed a bug where the new bridge_interface_note parameter didn't exist in the Database->insert_or_update_bridge_interfaces() method.
* Updated anvil-update-states() to only write out the JSON/XML files if it's running on a dashboard. For nodes and DR hosts, it just needs to update the database.
* Created a new hook in anvil-daemon that will call tasks on a machine that is configured.
* As per RHEL 8.1 release notes, changed the package 'dnf-utils' to 'yum-utils' in the packages to load for install target repos.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'ip_address_note' to the 'ip_addresses' table as there was no column convenient for flagging as DELETEd.
* Added 'uuid' to Database->insert_or_update_file_locations() and ->insert_or_update_files(), and actually used it in all ->inser_or_update_X() methods.
* Added 'delete' as a parameter to Database->insert_or_update_ip_addresses() to allow simple deletion of a referenced IP address.
* Addressed a few 'undefined variable' errors.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the loop detection logic in Log->entry where processing large strings was triggering it when it shouldn't.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where '$target' being preset to 'local' was causing bad calls to 'Remote->call'.
* Updated Storage->change_mode and -> change_owner to work locally and on remote hosts.
* Barely started work on striker->process_anvil_menu().
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated striker-scan-network to only run once per day unless --force or a given --network is used. This avoids repeated scans when the anvil-daemon restarts frequently for whatever reason.
* Fixed (for real this time) Convert->time's handling of the 'long' parameter.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added job parsing to tools/striker-parse-oui and tools/striker-scan-network, and enabled them in anvil-daemon.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Convert->time() where the suffix was long when it should have been short, and vice-versa.
* Updated Network->download() to check if the target file exists and, if so, to abort unless 'overwrite' is given or the existing file is 0-bytes long. Also updated it to not exit on immediate error after the wget call and instead check to see if a zero-byte file exists and remove it, if so.
* Created Validate->is_hex() to check hexadecimal strings.
* Updated Words->clean_spaces() to remove MS-DOS-style ^M cr/lf characters.
* Updated anvil-daemon to have a section for periodic tasks that run daily, and added striker-parse-oui as well as moved striker-manage-install-target refresh to that check. Also made those tools run on dashboards only.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished the detection of and handling of initialization of a host when the host has no Internet access.
* Disabled (for now) anvil-daemon's check_ssh_keys function.
* Fixed a couple small bugs elsewhere.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated System->host_name to work locally and on remote targets.
* Renamed all 'hostname' instances to 'host_name' to standardize on a spelling throughout the program.
* Removed use of and dependency on 'hostname'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Remote->call() to detect when a connection fails because the target's known_hosts entry has changed. Still need to add the function to report this to the user.
* Fixed a bug where new-lines in Words->parse_banged_string() where a double-banged word string's variable value would cause an infinite loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Tools->refresh to reload anvil.conf in one call.
* Created Anvil::Tools::Network to hold network-related tasks.
** Created Network->is_remote() that tests to see if a string (containing a target) refers to the remote machine (versus a local machine). Updated all previous checks to use this new method.
** Moved Get->network_details() and Get->network() to the new Network module. Renamed Get->network() to Network->get_network().
** Made Network->get_ips() work locally and remotely.
** Created Network->find_matches() that compares two scanned machines IPs (via two previous calls to Network->get_ips())
* Created Database->manage_anvil_conf() that will add, update or remove a given database connection in a local or remote anvil.conf file.
* Fixed bugs in Storage->backup() where the bash calls were quite broken. I'm not sure how it ever worked before... x_x
* Updated anvil-daemon to not initialize a database unless it's running on dashboard. Also added a check at the startup of anvil-daemon where it will go into a loop waiting for a database to become available, re-reading anvil.conf each loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated striker to no longer try to SSH to a remote machine. To enable this, we'd have to give apache a shell and an SSH key, which is dumb and dangerous when considered.
* Created tools/striker-get-peer-data which is meant to be invoked as the 'admin' user (via a setuid c-wrapper). It collects basic data about a target machine and reports what it finds on STDOUT. It gets the password for the target via the database.
* Updated anvil-daemon to check/create/update setuid c-wrapper(s), which for now is limited to call_striker-initialize-host.
* Created Anvil/Tools/Striker.pm to store Striker web-specific methods, including get_peer_data() which calls tools/striker-initialize-host via the setuid admin call_striker-initialize-host c-wrapper.
* In order to allow striker via apache to read a peer's anvil.version, which it can no longer do over SSH, any connection to a peer where the anvil.version is read is cached as /etc/anvil/anvil.<peer>.version. When Get->anvil_version is called as 'apache', this file is read instead.
* Updated Database->resync_databases() and ->_find_behind_databases() to ignore the 'states' table.
* Created tools/striker-initialize-host which will be called as a job to initialize a node/dr host.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in System->get_ips() where DHCP-assigned IPs were not being parsed properly to get the default gateway.
* Added the alteeve-el8-repo to the kickstart files install package list.
* Updated anvil-daemon to sleep 2 seconds between loops, instead of 1. Added a check to 'check_firewall' to not run until after the system has been configured.
* Quieted a lot of logging.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated package list to fix changed dependencies from RHEL 8 beta to final.
* Changed anvil_daemon to only check DHCP once per minute instead of every loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started work of "Files" (replacement for the media library), including database tables, planned sync flow and web UI.
* Added a check for the /mnt/shared directories and create them as needed in the periodic anvil-daemon checks.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed a couple Striker-only tools to use the 'striker' prefix instead of 'anvil'.
* Updated the core_tables list.
* Renamed 'sys::log::main' to 'sys::log::file'.
* Fixed some "Back" and "Refresh" links.
* Started planning out the file sync system.
* Started work on the Anvil! setup / host prep system.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started work on a "Jobs" button on the Striker UI to be able to see the progress of jobs that are running in the background.
* Updated the Help icon and added the jobs (tasks) icons.
* Made logging around dhcpd more verbose to help figure out why it's auto-running after initial configuration.
Signed-off-by: Digimer <digimer@alteeve.ca>
Digimer