* Fixed a bug where servers protected by DR hosts aren't deleted when the server itself is deleted.
* Updated DRBD->delete_resource() to remove the server's XML file if the host is a DR host.
* Updated anvil-version-change and anvil.sql to enable update_audits and the audits table.
Signed-off-by: digimer <mkelly@alteeve.ca>
* To update file handling for the new DR host linking mechanism, file_locations -> file_location_anvil_uuid was changed to file_location_host_uuid.
This required a fair number of changes elsewhere to handle this, with a particular noted change to Database->get_anvils() to look at host_uuid's for the subnodes in an Anvil! and, if either is marked as needing a file, make sure the peer is as well. Similarly, any linked DRs are set to have the file as well.
* Created a new Network->find_access that simply takes a target host name or UUID, and it returns a list of networks and IPs that the target can be accessed by.
* Updated Network->load_ips() to find the network interface being used for traffic so that things like the interface speed can be recorded, even when an IP is on a bridge or bond.
Unrelated, but in this commit, is a restoration of calling scan agents with a timeout now that the virsh hang issue has been resolved.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated the storage_group_members table to add the 'storage_group_member_note' that can be set to 'DELETED' to track when a member is deleted. Updated anvil-version-changes to check for and add this column as needed. Updated the anvil.sql schema for the same.
* Updated Cluster->insert_or_update_storage_group_members to add the new column.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added a new table to the main SQL schema to allow for more dynamic tracking of which Anvil! node pairs can use which DR hosts.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got anvil-manage-alerts managing alert overrides.
* Created, but for now commented out, the new 'audit' table.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the scan agent timeout to 60 seconds. Also made the scan agent exit code log entries more helpful.
* Updated System->collect_ipmi_data() to now better handle duplicate sensor names. Now, instead of simply appending an integer, we find the hex address and use that in the sensor name when duplicates exist. This solves the problem of the sensor names not being consistently shown in order.
* Fixed message bugs (bad variable insertions) in scan-apc-pdu and scan-apc-ups.
* Fixed schema procedure bugs in the 'temperature' and 'ip_address' tables where the columns were in bad order, causing constanty updates.
Incomplete work;
* Create the shell of 'anvil-manage-storage', but virtually no logic exists in it yet.
* Started work on anvil-safe-start to deal with an issue where DRBD resources don't start when a server is running on a peer.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->find_host_uuid_columns() and ->_find_column() to create a list of tables and column names in the proper order to allow deletion of foreign keys to that deeply nested primary keys can be deleted. Specifically, this was meant for hosts -> host_uuid and anvils -> anvil_uuid, though it should work for other tables.
* Updated html/jquery-ui-1.12.1/package.json to address CVE-2020-7729
* Fixed a bug in the temperature table's history procedure where temperature_weight wasn't being copied.
* Updated anvil-provision-server to support '--anvil' that can take either the anvil-uuid or anvil-name.
* Updated anvil-safe-stop to default the stop-reason to 'user'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* The get_mmeory endpoint was completed.
* The get_replicated_storage endpoint was completed, though it requires testing and likely has issues.
To prepare for the get_status endpoint work, I needed to update ScanCore and modules to track the host_status. This commit contains the work needed for this.
* Updated ScanCore->post_scan_analysis_striker() to use configured fence devices (except PDUs) to check if a target host is off or on, in there is no host_ipmi interface. In all cases, if a machine can be confirmed on or off, the host_status is now updated.
* To support the above fence based power checks, updated scan-cluster to store the on-disk CIB in the new scan_cluster -> scan_cluster_cib colume.
* Updated ScanCore->parse_cib() to map stonith primitive IDs to fence agents. Updated ->parse_crm_mon() to not call if the executable doesn't exist to avoid unhelpful error messages in the logs when called from a Striker.
* Update DRBD->gather_data() to get the size data from /sys/block/drbd<minor>/size' x '/sys/block/drbd<minor>/queue/logical_block_size so it works when a device is Secondary (and can't be promoted).
* Updated Database->get_hosts_info() to record the short host name as well as the stored host name. Created ->update_host_status() as a wrapper to ->insert_or_update_hosts() that only updates the host status.
* Updated anvil-join-anvil to disabled ksm and ksmtuned daemons.
* Updated scancore and anvil-daemon to set the host_status to 'online' on startup.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in ScanCore->agent_startup() where a (thankfully broken) check to append tables to the 'sys::database::check_tables' would cause an infinite loop as both were pointers to the same anonymous array.
* Fixed a bug in scan-ipmitool where the scan_ipmitool_variables table didn't use a host_uuid reference, causing resyncs of that table to sync for all hosts and cause DB errors when the scan_ipmitool record from another host wasn't sync'ed yet.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->_find_behind_databases() _find_behind_databases() where the logic to figure out which column was the host_uuid reference was too liberal, causing the wrong column to be selected in some cases. Also added a check to not look for host_uuid columns on specific tables where a match would be made, but the column is allowed to be null (like server_host_uuid that indicates the host of the server).
* Started work on the scan-filesystems scan agent, which is needed to record the data that the file system UI endpoints will need.
* Removed the 'not null' constraint from 'servers' -> 'server_host_uuid'.
* Fixed a bug in 'anvil-provision-server' where the driver ISO being 'none' caused the provision script to use the driver ISO switch.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Get->os_type() to use 'cat' instead of Storage->read_file() because 'rsync' may not be available when it is called during striker-initialize-host calls.
* Updated Database methods to skip 'oui' and 'state' during resync.
* Updatedb striker-initialize-host to detect when it's initializing a CentOS Stream Node / DR Host and enable the HA repo.
* Created the tools/striker-auto-initialize-all tool, which is very much incomplete, that will allow for the rapid creation of a full Anvil! from freshly installed machines autonomously.
Signed-off-by: Digimer <digimer@alteeve.ca>
* This commit includes two unrelated test files for UI work, cgi-bin/get_anvil_status and cgi-bin/get_anvils.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Reworked scan-ipimitool so that on nodes and dr hosts, it only scans itself. On strikers, it scans all hosts found in active Anvil! systems with a host_ipmi entry. `
* For all agents, reduced log verbosity to not push too much noise into anvil.log while scancore is running in the background.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Cluster->add_server() to now set failure timeouts to actual numbers instead of INFINITY after discovering that INFINITY doesn't work in those cases.
* Updated Databsae->get_hosts to now check if other entries have the same host name, and if so, to set their host_key to 'DELETED'. This should make it easier to handle when a hardware machine is replaced by new hardware but uses the same host_name.
* Updated Email->check_queue() to start and enable postfix.service if it's found to not be running.
* Updated Get->available_resources() to return '!!no_data!!' when a given host hasn't got any data in scan_lvm_vgs. Now use this in anvil-provision-server to exit if a node or dr host hasn't run scancore yet.
* Fixed a bug in scan-lvm where the pvs_uuid wasn't being loaded properly, preventing lost PVs, VGs and LVs from being flagged as deleted.
* Started work on anvil-migate-server, though it's far from complete.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got tools/striker-sync-shared to pick up 'upload::move_incoming' jobs, move the uploaded file to /mnt/shared/files/, copies it to peer dashboards, adds it to the 'files' table and adds it to 'file_locations'.
* Reworked the 'file_locations' table to now map files to Anvil! systems, not hosts. It simply tracks if a given file should be on Anvil! members or not. Later, striker-sync-shared on the Anvil! members will pull the file down.
* Updated Storage->get_file_stats() to record the file's mimetype.
* Fixed up a few issues in cgi-bin/upload.pl.
Signed-off-by: Digimer <digimer@alteeve.ca>
ing or create new servers.
* Created Database->insert_or_update_storage_groups() and ->insert_or_update_storage_group_members() to manage the new associated tables. Together, these tables create storage groups and track the VGs that are members of the group.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_power() where the check to see if 'power_ups_uuid' was passed in was reversed. Also fixed a bug where the convertion of the value to TRUE/FALSE for the old value wasn't being set correctly.
* Updated Server->get_definition() to only translate the host name to a uuid if the host uuid wasn't passed in. Added a sanity check on the UUID as well.
* Cleaned up how existing UPSes are displayed in Striker when managing UPSes. Also renamed the form's scan agents to match the real agent names.
* Fixed alert sorting in scan-apc-pdu.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created (but not finished) scan-apc-pdu
* Added support to tracking maintenance-mode for nodes in Cluster->parse_cib
* Created Remote->read_snmp_oid().
* Created Server->get_definition.
* Updated Server->get_status() to write-out server XML files on-demand.
* Finished scan-cluster.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the servers table to remove the 'not null' constraints on the server_start_after_server_uuid, server_pre_migration_file_uuid and server_post_migration_file_uuid columns.
* Updated ScanCore->agent_startup() to connect to the database(s) when there isn't a table list.
* Updated Server->migrate_virsh() to test for DB access before making DB calls (to allow ocf:alteeve:server to function even if all ScanCore DBs are offline).
* Updated ocf:alteeve:server to connect to the databases (though work without it), and changed '$FILE_NAME' to be 'ocf:alteeve:server' (to make logging more legible)
* Created the skeleton for 'scan-storage'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed servers -> 'server_clean_stop' to 'server_user_stop' to make it clearer what the column represents.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Server->migrate_virsh() to set 'servers' -> 'server_state' to 'migrating' and clear it again once the migation completes. Also added support for cold (frozen) versus live migrations.
* Updated Cluster->parse_cib() to check if a server with the server_state set to 'migrating' isn't actually migrating anymore and, if not, to clear that state. This is needed as scan-server will blindly ignore/skip any migrating server, and if a migration call is interrupted, the state could get stuck.
* Updated the 'servers' database table (and associated Database methods) to add columns for;
** server_ram_in_use - tracking RAM used by a running server
** server_configured_ram - RAM allocated to a running server (used with the above to alert a user and track _currently_ available RAM)
** server_updated_by_user - To be set by Striker tools to indicate when the user made a change that needs to push out to nodes / running server.
** server_boot_time - Tracks the unixtime when the server booted (to track uptime even if the server migrates across nodes).
* Created Get->anvil_name_from_uuid() to easily convert an Anvil! UUID into a name. Also created ->host_uuid_from_name() to translate a host name into a host UUID.
* Created Server->get_runtime() that translates a server name into a process ID and then uses that to determine how long (in seconds) it has been running. This is used when a server transitions from 'shut off' to 'running' to determine exactly when the server booted (current time - runtime).
* Renamed all 'Server->parse_definition' calls that used 'from_memory' to 'from_virsh' to clarify the data source.
* Made scan-hardware smarter about RAM change alerts.
* Updated scancore to load agent strings on startup so that processing pending alerts works properly.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed the 'defitintions' table to 'server_definitions' to clarify the purpose, and made all the 'server' columns have then 'not null' constraint.
* Created Database->insert_or_update_servers(), ->get_servers(), ->insert_or_update_server_definitions() and ->get_server_definitions().
* Updated scancore, anvil-daemon, and scan agents to not run unless they're run with root privs.
* Got scan-server to update the servers / server_definition tables and the on-disk file when needed.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Began (but haven't finished) Database->insert_or_update_servers().
* Created Storage->get_file_stats() to collect the (l)stat information for a file.
* Got more work done on scan-server.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Alert->check_alert_sent() and the 'alert_sent' table to remove 'alert_name' as it really isn't helpful given record_locator.
* Created 'Database->purge_data' that takes an array of tables and, in reverse, purges them from the database(s). This also disables archiving and resync functions now.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Alert->register to take a hash reference for message variables to simplify when a caller plans to log and register an alert at the same time.
* Updated Convert->bytes_to_human_readable() to name the 'size' variable used internally for 'bytes' to actually be 'bytes' for better consistency.
* Created multiple new Database methods;
** ->check_condition_age() is meant to be used by scan agents to see how long a given condition has been in play (ie: how long ago power was lost to a UPS or a sensor became unreadable).
** ->insert_or_update_health() handles recording data to the new 'health' table, used for determining ideal hosts for servers between nodes.
** ->insert_or_update_power() handles recording data to the new 'power' table, used for determining how power events are handled.
** ->insert_or_update_temperature() handles recording temperature data to the new 'temperature' table, used to determine how thermal events are handled.
* Got a lot more done on the scan-hardware scan agent. Only part left now is post-scan health processing.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Dropped support for supporting imperial measurements in generated emails.
* Created Database->get_alerts() to read in alert data and ->get_recipients() to get the list of alert recipients.
* SQL Schema changes;
** Added 'alert_processed' to 'alerts' to track what alerts have been processed.
** Changed 'recipient_new_level' to 'recipient_level' now that we're only using 'notifications' as a per-host override for user/hosts alert levels.
** Removed 'recipient_units' as we're no longer supporting non-metric values.
* Updated Alert->register() to take strings for the alert level (which gets translated to integers).
* Created Email->get_current_server() to returned the mail_server_uuid of the active mail server (if any). Created ->send_alerts() to process unprocessed alerts and send emails to recipients.
* Updated Words->parse_banged_string() to take the 'language' parameter.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Update striker manifest run to add an entry into the 'anvils' table, and pass the anvil_uuid to the jobs rather than the various host_uuid's.
* Fixed a bug in the 'anvils' SQL procedure that copied data into the history schema (a few columns were missing).
* Updated anvil-configure-host to reboot when finished to be certain network changes have taken effect. Also updated the handling of virsh bridges to delete the autostart symlinks if libvirtd daemon isn't running.
* Added some logic to anvil-daemon to call 'anvil-update-states' with the -v{1,3} flag depending on the active debug level.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated 'variables' -> 'variable_source_uuid' to type 'uuid' and removed the 'not null' constraint.
* Updated Database->insert_or_update_variables() to check/update 'variables_source_table' and 'variables_source_uuid'.
* Created the 'trusts' database table which will, when done, tell anvil-daemon which users@machines to trust (setup passwordkess SSH).
* Created (but not finished) System->manage_authorized_keys() and moved the logic over to it from anvil-daemon.
* Changed the host types "dashboard" to "striker".
* Moved the following methods from 'System' to 'Get';
** System->get_host_type to Get->host_type
** System->get_bridges to Get->bridges
** System->get_free_memory to Get->free_memory
** System->get_os_type to Get->os_type
** System->get_uptime to Get->uptime
* Updated striker to include the host_uuid for the 'node1', 'node2' and (if chosen) 'dr1' when running a job manifest.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the anvils database table to have columns for traching which hosts are used as node 1, node 2 and the DR host.
* Updated Database->get_hosts() to check which, if any, Anvil! a given hosts is attached to.
Signed-off-by: Digimer <digimer@alteeve.ca>
** Created Database->get_upses() and ->insert_or_update_upses().
** Created Striker->get_ups_data(). This parses the special 'ups_XXXX' strings.
* Updated Validate->is_domain() and added ->is_host_name() to use the Data::Validate::Domain module (which is now required in the core RPM).
* Started work on manifest handling.
* Sorted the language keys alphabetically.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Removed fences -> fence_type from the database schema, wasn't needed.
* Updated Striker->get_fence_data() to store data in the 'fence_data' parent hash so to not conflict with 'fences' used in Database->get_fences().
* Got the saving and loading of fence devices working.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Striker->get_fence_data() that reads/parses the unified fence metadata file created by tools/striker-parse-fence-agents.
* Created the new 'fences' database table and Database->insert_or_update_fences() to handle it.
* Added hosts -> host_ipmi that will, later, store information on how to access the host's IPMI interface, when available.
* Sketched out how the new Install Manifests are going to work.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->get_recipients() (from what used to be get_alert_recipients), as well as ->get_mail_servers() and ->insert_or_update_notifications().
* Renamed 'recipients -> notification_anvil_uuid' to 'notification_host_uuid'.
* Started work on scancore -> check_email.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started work on Striker's notification recipient management page. Cleaned up the variable names in the mail_server management function.
* Added recipients -> recipient_units column to the sql schema.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got Striker to the point where it can save mail servers (not load existing or delete yet, though).
* Added a check to striker-parse-oui so that it only runs once per day.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->insert_or_update_mail_servers() to insert/update entries in the 'mail_servers' table.
* Got more work done on the email server menu. It now shows the entered values, but not yet save the data.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added missing foreign key references to the SQL schema.
* Added support to tools/anvil-update-states to connect bonds to bridges, as appropriate.
* Finished the logic in test.pl to pull the network data (with connections between bridges, bonds and interfaces) needed for the WebUI.
Signed-off-by: Digimer <digimer@alteeve.ca>
digimer
Digimer