* Created Database->get_mac_to_ip()
* Updated Database->insert_or_update_mac_to_ip() to find an entry using
both the IP and MAC address.
* Updated Network->get_ips() to store only the first IP it finds on an
interface as the main IP (for use in /etc/hosts, etc) and to store it
and any other IPs in a new hash.
* Updated scan-network to use the new hash above to record them in the
'mac_to_ip' table. Similarly, before marking an IP as removed, it
checks to see if it's an alternate IP.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Renamed the old ->wait_for_networks() to be ->wait_for_nm_online().
* The new ->wait_for_networks() waits for all interfaces we manage to be
'activated' before returning.
Signed-off-by: digimer <mkelly@alteeve.ca>
Added the call to Network->wait_for_network to pause scancore and
anvil-daemon startups until NetworkManager says it's up and running.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added a default timeout of 180 seconds, and updated
anvil-configure-host to reduce this to 60 seconds while configuring
the host.
* Added a check for interfaces configured under a bond. If none are
found, the bond is ignored.
* Updated Storage->update_config() to take the new 'append' attribute to
allow adding a variable if it wasn't found already in the config.
* Added the new 'network::wait_for_bonds::timeout' variable to enable
changing the default timeout for Network->wait_for_bonds().
Signed-off-by: digimer <mkelly@alteeve.ca>
* Network->find_matches() was trying to compare two IPs when the second
IP wasn't actually defined.
* Disabled scancore's blocking of running before the host is configured.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Database->get_ip_addresses() was marking IPs that weren't on a network
we managed, the IP would be marked as DELETEd, which caused problems
with initializing targets, and it generated a lot of repeat alerts.
* Updated logging in Network.pm to help with debugging.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Network->collect_data() wasn't deleting old data before rescans.
* anvil-configure-host wasn't checking links that should be in a bond if
the bond already existed.
Signed-off-by: digimer <mkelly@alteeve.ca>
* It's technically done, but I know bugs remain.
* Updated Jobs->update_progress() to take 'file' and 'line' to make it
easier in the logs to see the origin of the message, when logging the
update.
* Created Network->modify_connection() to update network manager
variables. Created ->reset_connection() to take an interface down and
bring it back up again.
* Fixed a bug in scan-network where the device_to_uuid hash wasn't being
stored.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Also fixed problems with scan-network related to the new network
naming / NM system.
* Updated Database->insert_or_update_network_interfaces() to better
search for a network_interface_uuid when not specified.
* Updated Network->collect_data() to take the new 'start' parameter
which, when set, brings up unconfigured connections/devices.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated Network->collect_data() to find the GENERAL.DEVICES and
GENERAL.IP-IFACE from match.interface-name when the link is down.
* More work done on anvil-configure-host.
Signed-off-by: digimer <mkelly@alteeve.ca>
* This adds the new 'networks' and 'test_access' parameters to allow
restricting/ordering matched networks, and adds 'test_access' to
validate the link is working.
* Continued work on anvil-manage-server-system
Signed-off-by: digimer <mkelly@alteeve.ca>
* Switched all calls to virsh to use Sys::Virt to deal with contention of simultaneous virsh calls.
* Removed collecting screenshots from scan-server.
* Fixed a bad variable substitution in an alert.
* Fixed a bug where a server's boot time wasn't being recorded properly.
* Reworked how we determine which server definition was most recently updated and propogated.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated anvil-manage-server-storage, striker-collect-debug, and striker-update-cluster to be able to find a connection on an interface when none were found on preferred networks.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated DRBD->get_status() to take the new 'host' paramter to allow the caller to define the hash key string used in the stored data.
* Updated Get->anvil_version() (and a few other places) to use the new 'striker-ui-api' shell user, replacing the 'apache' user.
* Updated Remote->test_access() to take the new 'close' parameter to close the SSH session used when testing access to the target.
* Fixed a logging bug in anvil-manage-power.
* Updated anvil-update-system to take the '--no-reboot' and 'clear-cache' command line switches.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated anvil-manage-server-storage to the point where it can now insert and eject optical disks!
* Updated System->call to log parameters if 'shell_call' isn't set.
* Fixed a bug in anvil-manage-server process_interactive where an $anvil->data reference was being scoped.
Signed-off-by: digimer <mkelly@alteeve.ca>
* To update file handling for the new DR host linking mechanism, file_locations -> file_location_anvil_uuid was changed to file_location_host_uuid.
This required a fair number of changes elsewhere to handle this, with a particular noted change to Database->get_anvils() to look at host_uuid's for the subnodes in an Anvil! and, if either is marked as needing a file, make sure the peer is as well. Similarly, any linked DRs are set to have the file as well.
* Created a new Network->find_access that simply takes a target host name or UUID, and it returns a list of networks and IPs that the target can be accessed by.
* Updated Network->load_ips() to find the network interface being used for traffic so that things like the interface speed can be recorded, even when an IP is on a bridge or bond.
Unrelated, but in this commit, is a restoration of calling scan agents with a timeout now that the virsh hang issue has been resolved.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Created the anvil-manage-dr man page.
* Reworked anvil-manage-dr's --protect logic to search for which network works with the DR host, instead of assuming it's the SN.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Reworked Network->bridge_info() to use 'ip' to get the list of bridges, and 'bridge' to find interfaces connected to the bridge.
* Added 'test' messages to Words->string().
* Fixed a bug in scan-lvm where mdadm based PVs didn't read the sector size properly.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in scancore-agents/Makefile.am where scan-network was missing.
* Started work on anvil-delete-server.8. Incomplete at this time.
* Updated Network->get_ips() to record the interface status.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added multiple new private methods to Network that help in managing the firewall.
* Updated Server->boot_server to manage the firewall after the server boots. Updated ->migrate_server to create a job, if a database connection exists, for the migration target to update it's firewall as soon after the server appears as possible.
* Updated ocf:server:alteeve to manage the firewall when called post-migration, in case there was no DB connection and the job above didn't run. Fixed a bug where the disk state wasn't being evaluated properly.
* Updated scan-server to check that the firewall is managed when a server state has changed.
* Updated anvil-daemon to run Network->manage_firewall on startup.
* Heavily reworked 'anvil-manage-server' to either just run 'Network->manage_firewall', or if passed '--server X', to wait for the server to appear for up to 1 minute, then to check that the firewall is managed (to capture servers being migrated to the host.)
* Removed firewall management from striker-prep-database.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->get_host_from_uuid() to cache results.
* Fixed a bug in Database->get_storage_group_data where a DELETE wasn't deleting from the history schema as well.
* In Database->resync_databases(), references to the old 'host_uuid' that we used to use to resync just the local host's data was removed. Added also a check where two or more entries in a given history schema had the same modified_date and, when found, the newest entry is preserved and the rest are deleted. Before this, a resync where two+ records had the same modified_time would only sync the last record, leaving a mismatch in history schema entries triggering repeated resyncs.
* Fixed a bug in Email->send_alerts() where the 'alerts' table was being updated without a modified_date being set.
* Fixed a bug in System->test_ipmi() where the 'hosts' table was being updated without a modified_date being set.
* Updated scan-network to clear up old deleted ip_addresses, bonds and bridges. Also fixed bugs where public schema records were being deleted without history records being deleted.
* Updated anvil-update-states to fix bugs where DELETEs were happening without setting the modified_date.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Network->load_ips() to load extra information about the interfaces.
* Updated ocf:alteeve:server to not check libvirtd daemon state on server start.
* Updated scan-hardware to check for duplicate entries and purge if found.
* Updated scan-network to check for the 'default' virbr0 interface by checking if the config file exists instead of calling virsh.
* Updated scan-server to have better logging.
* Created the new (and incomplete) anvil-test-alerts tool
* Updated scancore to support --purge to pass to all agents and then exit.
* Updated ScanCore->call_scan_agents() to no longer use 'timeout' as it was causing issues with virsh calls.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated ocf:alteeve:server to always try to bring up the peer's DRBD resource, even when the local resource is up.
* Fixed a bug in scan-network where purging duplicate bridges failed in some cases.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Network->find_matches() to take 'source' and 'line' parameters to help identify the source of issues with missing hashes.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Network->is_our_interface() which returns '1' if an interface is one managed by an Anvil!. Also updated scan-network to use this to determine when an interface alert should be a warning or notice level alert.
Signed-off-by: Digimer <digimer@alteeve.ca>
digimer
Tsu-ba-me
Digimer