* Fixed a bug in Database->insert_or_update_variables() where, if 'update_value_only' was set but not variable_uuid was passed or could be found, an (incomplete) INSERT would be attempted.
* Added support for generating module metadata when setting up local repos on Striker.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got more work done on confirming the user's request to setup the network of a node or DR host.
* Reworked network select boxes to sort by the network name instead of the MAC address.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_network_interfaces() to take the new 'link_only' and 'timestamp' parameters to support flushing out the cache file above.
* Updated anvil-daemon to run anvil-update-states when the database connection is lost. Also moved the 'handle_periodic_tasks()' function call to be conditional on there being a database connection.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where ip_addresses could break resync when 2+ machines had the same IP (ie: 192.168.122.1).
* Updated logging of DB transactions to show the DB host's IP instead of the UUID.
* Updated Get->date_and_time to take a 'use_utc' parameter to return the time using GMT time instead of the host's TZ.
* Updated anvil-daemon to periodically call tools/anvil-update-states. Also upadted anvil-daemon to delay daily jobs by 2 hours except for the dashboard with the highest sorted UUID to minimize dual runs of tasks that only need to run once per day per cluster.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a couple logging bugs in System->call().
* Fixed a bug in anvil-daemon where it was trying to setup setuid-C wrappers on non-dashboards.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in System->generate_state_json() where interfaces connected to a bridge were constantly having their 'network_interface_bond_uuid' cleared and reset.
* Finished (for now) the jquery code to update the network interface list when preparing the network interface configuration of a new node or DR host.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->get_hosts_info() (though it's not at all finished) that will write out a unified JSON file contain all data known about all hosts/Anvil! systems. This will be later used to create the WebUI parts.
* Also created, but also not finished, Network->load_interfces() that will work sort of like ->load_ups, but include all interfaces regardless of if they have an IP or not.
* Fixed a bug where the new bridge_interface_note parameter didn't exist in the Database->insert_or_update_bridge_interfaces() method.
* Updated anvil-update-states() to only write out the JSON/XML files if it's running on a dashboard. For nodes and DR hosts, it just needs to update the database.
* Created a new hook in anvil-daemon that will call tasks on a machine that is configured.
* As per RHEL 8.1 release notes, changed the package 'dnf-utils' to 'yum-utils' in the packages to load for install target repos.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'ip_address_note' to the 'ip_addresses' table as there was no column convenient for flagging as DELETEd.
* Added 'uuid' to Database->insert_or_update_file_locations() and ->insert_or_update_files(), and actually used it in all ->inser_or_update_X() methods.
* Added 'delete' as a parameter to Database->insert_or_update_ip_addresses() to allow simple deletion of a referenced IP address.
* Addressed a few 'undefined variable' errors.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the loop detection logic in Log->entry where processing large strings was triggering it when it shouldn't.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where '$target' being preset to 'local' was causing bad calls to 'Remote->call'.
* Updated Storage->change_mode and -> change_owner to work locally and on remote hosts.
* Barely started work on striker->process_anvil_menu().
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated striker-scan-network to only run once per day unless --force or a given --network is used. This avoids repeated scans when the anvil-daemon restarts frequently for whatever reason.
* Fixed (for real this time) Convert->time's handling of the 'long' parameter.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added job parsing to tools/striker-parse-oui and tools/striker-scan-network, and enabled them in anvil-daemon.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Convert->time() where the suffix was long when it should have been short, and vice-versa.
* Updated Network->download() to check if the target file exists and, if so, to abort unless 'overwrite' is given or the existing file is 0-bytes long. Also updated it to not exit on immediate error after the wget call and instead check to see if a zero-byte file exists and remove it, if so.
* Created Validate->is_hex() to check hexadecimal strings.
* Updated Words->clean_spaces() to remove MS-DOS-style ^M cr/lf characters.
* Updated anvil-daemon to have a section for periodic tasks that run daily, and added striker-parse-oui as well as moved striker-manage-install-target refresh to that check. Also made those tools run on dashboards only.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished the detection of and handling of initialization of a host when the host has no Internet access.
* Disabled (for now) anvil-daemon's check_ssh_keys function.
* Fixed a couple small bugs elsewhere.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated System->host_name to work locally and on remote targets.
* Renamed all 'hostname' instances to 'host_name' to standardize on a spelling throughout the program.
* Removed use of and dependency on 'hostname'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Remote->call() to detect when a connection fails because the target's known_hosts entry has changed. Still need to add the function to report this to the user.
* Fixed a bug where new-lines in Words->parse_banged_string() where a double-banged word string's variable value would cause an infinite loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Tools->refresh to reload anvil.conf in one call.
* Created Anvil::Tools::Network to hold network-related tasks.
** Created Network->is_remote() that tests to see if a string (containing a target) refers to the remote machine (versus a local machine). Updated all previous checks to use this new method.
** Moved Get->network_details() and Get->network() to the new Network module. Renamed Get->network() to Network->get_network().
** Made Network->get_ips() work locally and remotely.
** Created Network->find_matches() that compares two scanned machines IPs (via two previous calls to Network->get_ips())
* Created Database->manage_anvil_conf() that will add, update or remove a given database connection in a local or remote anvil.conf file.
* Fixed bugs in Storage->backup() where the bash calls were quite broken. I'm not sure how it ever worked before... x_x
* Updated anvil-daemon to not initialize a database unless it's running on dashboard. Also added a check at the startup of anvil-daemon where it will go into a loop waiting for a database to become available, re-reading anvil.conf each loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated striker to no longer try to SSH to a remote machine. To enable this, we'd have to give apache a shell and an SSH key, which is dumb and dangerous when considered.
* Created tools/striker-get-peer-data which is meant to be invoked as the 'admin' user (via a setuid c-wrapper). It collects basic data about a target machine and reports what it finds on STDOUT. It gets the password for the target via the database.
* Updated anvil-daemon to check/create/update setuid c-wrapper(s), which for now is limited to call_striker-initialize-host.
* Created Anvil/Tools/Striker.pm to store Striker web-specific methods, including get_peer_data() which calls tools/striker-initialize-host via the setuid admin call_striker-initialize-host c-wrapper.
* In order to allow striker via apache to read a peer's anvil.version, which it can no longer do over SSH, any connection to a peer where the anvil.version is read is cached as /etc/anvil/anvil.<peer>.version. When Get->anvil_version is called as 'apache', this file is read instead.
* Updated Database->resync_databases() and ->_find_behind_databases() to ignore the 'states' table.
* Created tools/striker-initialize-host which will be called as a job to initialize a node/dr host.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in System->get_ips() where DHCP-assigned IPs were not being parsed properly to get the default gateway.
* Added the alteeve-el8-repo to the kickstart files install package list.
* Updated anvil-daemon to sleep 2 seconds between loops, instead of 1. Added a check to 'check_firewall' to not run until after the system has been configured.
* Quieted a lot of logging.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated package list to fix changed dependencies from RHEL 8 beta to final.
* Changed anvil_daemon to only check DHCP once per minute instead of every loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started work of "Files" (replacement for the media library), including database tables, planned sync flow and web UI.
* Added a check for the /mnt/shared directories and create them as needed in the periodic anvil-daemon checks.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed a couple Striker-only tools to use the 'striker' prefix instead of 'anvil'.
* Updated the core_tables list.
* Renamed 'sys::log::main' to 'sys::log::file'.
* Fixed some "Back" and "Refresh" links.
* Started planning out the file sync system.
* Started work on the Anvil! setup / host prep system.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started work on a "Jobs" button on the Striker UI to be able to see the progress of jobs that are running in the background.
* Updated the Help icon and added the jobs (tasks) icons.
* Made logging around dhcpd more verbose to help figure out why it's auto-running after initial configuration.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a 'test' parameter to Log->entry, Storage->make_directory and Words->key to help debug in places that Log->x may not be usable.
* Converted many $anvil->Log->x calls to print if $test to help prevent recursive loops, but not all fixed yet.
* Added the new 'host_keys' database table to the schema for a possible new feature of removing passwords in favour if machines adding peers' public keys to their authorized_hosts file.
* Cleaned up the opening calls to $anvil->Tools->new() in most tools.
* Cleaned up some variables in tools/anvil-update-states after reading their values from files (clean trailing newlines).
Signed-off-by: Digimer <digimer@alteeve.ca>
* The 'notes' file has a lot of RHEL8 migration notes added, including RPM build orders.
* The anvil.spec file has switched the source from 'master.tar.gz' to 'anvil-3.0b.tar.gz' and moved the source to our webserver. Updated the dependencies as well.
* Updated anvil.sql to add the 'anvils' table and fixed some SQL schema problems.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-daemon to re-read the main words file on each loop.
* Updated scancore to read and purge each scan agent's words file between invocations.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got scancore scanning the agents directory, and properly holding on startup until at least one database is available (instead of exiting), and holding on startup until the local system is configured.
* Created the skeleton of the first scan agent; scan-network.
* Fixed a bug in Storage->check_md5sums() where dynamically loaded modules, loaded after the initial md5sum calcs, would cause the calling daemon to exit (possibly on every invocation).
* Created the scancore.README that will eventually be the main scan agent guide / API document.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started expanding Alert->register_alert() to actually implement it.
* Improved handling errors in Words->key().
* Started work on Striker's "Anvil!" menu section. Also cleaned up the power handling.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in the PXE default config path to install.img.
* Added tftp to the BCN firewall template.
* Fixed a bug in anvil-daemon / striker-manage-install-target where config files weren't being updated regularly (only when repo updates happened).
* Removed an RPM from striker-manage-install-target that is no longer available on F28.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Log->entry() to accept 'print => [0|1]' to send a log message to STDOUT (minus prefix) to avoid tools that were repeatedly calling print and Log->entry back to back.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Words->parse_banged_string where some variable strings were not being cleared, causing infinite loops.
* Added job progress reporting in striker-manage-install-target, and made it only refresh the RPM repo when '--refresh' is specified (with --force now forcing the issue). This was done to allow adding it into anvil-daemon in such a way that it would only update the RPM repo once a day.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Get->anvil_version where the version of local systems and remote systems differed in closing new lines.
* Fixed a bug in Database->insert_or_update_variables() where the 'debug' parameter wasn't working.
* Renamed System->determine_host_type -> System->get_host_type.
* Fixed a bug in System->get_uptime where there was a newline after the uptime integer.
* Updated anvil-daemon to track and record the state of the Install Target feature on Striker dashboards.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'sys::database::failed_connection_log_level' to allow silencing of log messages when a Striker peer database is not available.
* Started updating the .spec for the new release to add supported packages needed for PXE/dhcp/tftpboot.
* Added to repo tftpboot files as pulling them out of the packages and moving them into the right place relative to the modest size of adding them directly to our source wasn't justified.
* Created the still very very early 'tools/anvil-manage-firewall' tool.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Jobs->update_progress to take 'picked_up_by' as an optional parameter, defaulting to '$$' (the caller's PID).
* Created System->get_uptime() to return the current uptime in seconds.
* Added a delay to anvil-manage-power to not proceed with a reboot if the uptime is less than 600 seconds. This way, if any future bug causes an infinite reboot, there will be more time to determine what's wrong and debug the system between reboots.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up some logging.
* Made the "Reload" buttons work more sensibly and cleaned up some webui display stuff.
* Got deleting peers mostly working (well, it works, but then it goes into a loop thinking it needs to resync the now-gone database until the daemon restarts).
* Fixed a race condition bug where if a job exited between the time that anvil-daemon got a list of PIDs and when it checked to see if that specific pid was alive, a job that actually completed could be restarted.
* Added a loop check to anvil-manage-striker-peers where it would hold until a database connection to the newly added peer was available, preventing a condition where re-adding a peer (and so the host_uuid is in hosts) cause the job belonging to the peer to be recorded locally and then never synced to the peer.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'sys::log_date' which controls if the date and time is pre-pended to log entries.
* Created Get->host_name() which takes a host UUID and returns the 'host_name' from the 'hosts' table, if found.
* Cleaned up some HTML templates and logging.
Signed-off-by: Digimer <digimer@alteeve.ca>
Digimer