* DRBD is now configured to a ping-timeout of 3 seconds.
* Created Log->switches() that returnes the command line switches used by Anvil! tool command line calls based on the active log levels / secure logging. Appended this to all invocations of our tools.
* Updated Database->resync_databases() to now only skip 'jobs' and 'variables' tables with less than 10 record differences. All other differences will trigger a resync.
* Created System->_check_anvil_conf() that, as you might guess, checks in anvil.conf exists and created it (using defaults), if not. It also checks to see if the 'admin' group and user exists and creates them, if not.
* Updated anvil-daemon to check anvil.conf on start up and in each loop. Created the function check_journald() that checks (and sets, if needed) that journald logging is persistent.
* Made striker-manage-peers to check_if_configured on the Database->connect() when updating anvil.conf and the target UUID is the local machine. Also created a loop to make the reconnection a lot more robust.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Changed the alteeve repo RPM to the new cimmunity/enterprise repo
* Fixed a bug where 'fence_data::updated' was causing the fences web page to break.
* Fixed a bug in Database->insert_or_update_network_interfaces() where certain interfaces were being repeatedly added to the database.
* Fixed a bug in Database->_find_behind_databases() was marking DBs as behind even though they had less than 10 columns off.
* Fixed a bug in Get->host_name() where, if the host name was changed on disk but the environment variable was still the old name, it would cause the hostname to waffle back and forth and cause constant updated to /etc/hosts.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Cluster->check_stonith_config() that checks and, if needed, reconfigures a cluster's fencing (stonith) config.
* Updated scan-cluster to call Cluster->check_stonith_config() at the end of each call.
Signed-off-by: Digimer <digimer@alteeve.ca>
* The get_mmeory endpoint was completed.
* The get_replicated_storage endpoint was completed, though it requires testing and likely has issues.
To prepare for the get_status endpoint work, I needed to update ScanCore and modules to track the host_status. This commit contains the work needed for this.
* Updated ScanCore->post_scan_analysis_striker() to use configured fence devices (except PDUs) to check if a target host is off or on, in there is no host_ipmi interface. In all cases, if a machine can be confirmed on or off, the host_status is now updated.
* To support the above fence based power checks, updated scan-cluster to store the on-disk CIB in the new scan_cluster -> scan_cluster_cib colume.
* Updated ScanCore->parse_cib() to map stonith primitive IDs to fence agents. Updated ->parse_crm_mon() to not call if the executable doesn't exist to avoid unhelpful error messages in the logs when called from a Striker.
* Update DRBD->gather_data() to get the size data from /sys/block/drbd<minor>/size' x '/sys/block/drbd<minor>/queue/logical_block_size so it works when a device is Secondary (and can't be promoted).
* Updated Database->get_hosts_info() to record the short host name as well as the stored host name. Created ->update_host_status() as a wrapper to ->insert_or_update_hosts() that only updates the host status.
* Updated anvil-join-anvil to disabled ksm and ksmtuned daemons.
* Updated scancore and anvil-daemon to set the host_status to 'online' on startup.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_storage_group_members() to use the host_uuid when trying to find existing members.
* Added the skeleton of a bunch of new json endpoints for the new UI features.
Signed-off-by: Digimer <digimer@alteeve.ca>
* This commit includes two unrelated test files for UI work, cgi-bin/get_anvil_status and cgi-bin/get_anvils.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the new 'json_headers' template to shared.html
* Updated Database->get_anvils() to store 'anvils::anvil_uuid::<anvil_uuid>::query_time' to aid in JSON clients to know the data is coming from the server. Also fixed a bug where the normal 'modified_date' column wasn't being loaded from the database properly.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_jobs() where the 'job_host_uuid' being set to 'all' only translated to a job for the running host.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up the file manager;
** Got the jquery file uploader JS to be sane and altered it to be more useful.
** Got the list of existing files to be displayed (links clickable but not working yet).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up upload.pl now that it isn't responsible for loading the file details into the database. It only sets a job for the local Striker to process the file and move it into /mnt/shared/files, copy it to peer dashboards, then load jobs for Anvil! members to sync the new file.
* Created Database->get_files() and ->get_file_locations() to load the respective data.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got tools/striker-sync-shared to pick up 'upload::move_incoming' jobs, move the uploaded file to /mnt/shared/files/, copies it to peer dashboards, adds it to the 'files' table and adds it to 'file_locations'.
* Reworked the 'file_locations' table to now map files to Anvil! systems, not hosts. It simply tracks if a given file should be on Anvil! members or not. Later, striker-sync-shared on the Anvil! members will pull the file down.
* Updated Storage->get_file_stats() to record the file's mimetype.
* Fixed up a few issues in cgi-bin/upload.pl.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_power() where the check to see if 'power_ups_uuid' was passed in was reversed. Also fixed a bug where the convertion of the value to TRUE/FALSE for the old value wasn't being set correctly.
* Updated Server->get_definition() to only translate the host name to a uuid if the host uuid wasn't passed in. Added a sanity check on the UUID as well.
* Cleaned up how existing UPSes are displayed in Striker when managing UPSes. Also renamed the form's scan agents to match the real agent names.
* Fixed alert sorting in scan-apc-pdu.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created 'Cluster->which_node' that returns 'node1' or 'node2' to indicate which node a host is.
* Continued working on scan_cluster; decided to make it not host-dependent.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed the scan-network skeleton scan agent to scan-hardware and started work on it based on the M2 version.
* Updated Database->get_recipients() to take the 'include_deleted' parameter, and changed the default behaviour to only return active records.
Signed-off-by: Digimer <digimer@alteeve.ca>
* More work done on Email->send_email() to, well, actually send email (which it isn't doing yet, but it's close).
* Updated Words->key() to include the bad key name when no entry for the requested key exists in the words.xml file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Dropped support for supporting imperial measurements in generated emails.
* Created Database->get_alerts() to read in alert data and ->get_recipients() to get the list of alert recipients.
* SQL Schema changes;
** Added 'alert_processed' to 'alerts' to track what alerts have been processed.
** Changed 'recipient_new_level' to 'recipient_level' now that we're only using 'notifications' as a per-host override for user/hosts alert levels.
** Removed 'recipient_units' as we're no longer supporting non-metric values.
* Updated Alert->register() to take strings for the alert level (which gets translated to integers).
* Created Email->get_current_server() to returned the mail_server_uuid of the active mail server (if any). Created ->send_alerts() to process unprocessed alerts and send emails to recipients.
* Updated Words->parse_banged_string() to take the 'language' parameter.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got email server configuration under way. A mail server can now be configured via Email->_configure_for_server(), but more work is needed on when to switch between configs.
* Fixed some logging of passwords that wasn't being checked to see if secure logging was enabled or not.
* Fixed a bug in Striker where the back arrow in email config sub-sections weren't going back to the main email menu.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Converted most 'eval { }' calls to localize $@ and test the output of the eval, instead of checking to see if $@ was set.
* Converted all 'local' hash references to instead use the short host name of the local machine as a new standard.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated striker to now only offer gateway for IFN networks. EL8 seems to ignore 'GATEWAY="x"' in interface configs which caused anvil-join-anvil to always think an interface needs to be updated. Updated as well to remove DNS entries set in interfaces that are not the default gateway.
* Fixed a bug where DNS entries were being missed, causing entries to be repeatedly added to the interface that was the gateway interface.
* In anvil-update-states, added Get->switches() so that verbosity switches are used.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the fix from the last commit for System->call to handle returned data without an ending newline to Remote->call.
* Got more work done on System->update_hosts(). It's able to add new hosts, but misses the short and FQDN host names. Need to fix that and the verify existing / manual entries aren't molested.
Signed-off-by: digimer <digimer@pulsar.alteeve.com>
* Update striker manifest run to add an entry into the 'anvils' table, and pass the anvil_uuid to the jobs rather than the various host_uuid's.
* Fixed a bug in the 'anvils' SQL procedure that copied data into the history schema (a few columns were missing).
* Updated anvil-configure-host to reboot when finished to be certain network changes have taken effect. Also updated the handling of virsh bridges to delete the autostart symlinks if libvirtd daemon isn't running.
* Added some logic to anvil-daemon to call 'anvil-update-states' with the -v{1,3} flag depending on the active debug level.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated 'variables' -> 'variable_source_uuid' to type 'uuid' and removed the 'not null' constraint.
* Updated Database->insert_or_update_variables() to check/update 'variables_source_table' and 'variables_source_uuid'.
* Created the 'trusts' database table which will, when done, tell anvil-daemon which users@machines to trust (setup passwordkess SSH).
* Created (but not finished) System->manage_authorized_keys() and moved the logic over to it from anvil-daemon.
* Changed the host types "dashboard" to "striker".
* Moved the following methods from 'System' to 'Get';
** System->get_host_type to Get->host_type
** System->get_bridges to Get->bridges
** System->get_free_memory to Get->free_memory
** System->get_os_type to Get->os_type
** System->get_uptime to Get->uptime
* Updated striker to include the host_uuid for the 'node1', 'node2' and (if chosen) 'dr1' when running a job manifest.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished the saving of a "run manifest" job menu. Included filtering out potential machines already in other Anvil! systems from the select box and updating the password fields to not trigger a browser to save/auto-complete the field.
* Fixed a bug in Database->get_hosts() caused by the attempt to immediately return with a 0 if it had been called before. Now a check is made in ->insert_or_update_manifests() where the recursive loop was possible.
* Updated the RPM spec to v.33 after releasing .32 after the last commit. Also added the core requirement for perl-Data-Validate-Domain.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the anvils database table to have columns for traching which hosts are used as node 1, node 2 and the DR host.
* Updated Database->get_hosts() to check which, if any, Anvil! a given hosts is attached to.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got deleting of manifests done.
* Fixed a couple bugs from the _network to _ip variable rename.
* Fixed a bug where fence variables with double-quotes in them weren't being handled properly.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created the shell of Striker->generate_manifest() that will pull out CGI data to generate the install manifest itself and save/update it.
* Got step 3 menu finished along with the corresponding sanity checks.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Template->select_form() to add the 'style' paramter (for CSS style options), and added the ability to set the 'options' to the special value 'subnet' that builds an options box showing usable CIDR subnets.
Signed-off-by: Digimer <digimer@alteeve.ca>
** Created Database->get_upses() and ->insert_or_update_upses().
** Created Striker->get_ups_data(). This parses the special 'ups_XXXX' strings.
* Updated Validate->is_domain() and added ->is_host_name() to use the Data::Validate::Domain module (which is now required in the core RPM).
* Started work on manifest handling.
* Sorted the language keys alphabetically.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Removed fences -> fence_type from the database schema, wasn't needed.
* Updated Striker->get_fence_data() to store data in the 'fence_data' parent hash so to not conflict with 'fences' used in Database->get_fences().
* Got the saving and loading of fence devices working.
Signed-off-by: Digimer <digimer@alteeve.ca>
** Needed to add a couple more packages to CentOS's package list.
** Changed the PXE kickstart template to create a dedicated '/boot' partition (raw partition or on RAID 1). This seems to be required now on 8.1.
** Added PXE's UEFI support to the template system (untested, but it's at least generated now).
* Filtered out 'debug' and 'verbose' options when configuring fence devices.
* Added an internet test to tools/striker-manage-install-target and skipped attempting to download packages when there's no internet. Also made loading the host OS info into a small function.
* Started creating the man pages.
Signed-off-by: Madison Kelly <mkelly@alteeve.ca>
* Added fonts to Striker's RPM list and to the anvil-striker RPM dependency list so that the terminal is actually useful.
Signed-off-by: Madison Kelly <digimer@neutron.digimer.ca>
* Added filters Striker->get_fence_data() for parameters. Manually change 'action' entries from 'string' to 'select' and use the data in the 'actions' element to populate it, with actions that don't make sense filtered out.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug (well, made a work-around for an issue without a known reproducer) where, on some occassion, a record will end up in the public table without being copied into the history schema. When this happens, the next resync would crash out because the resynd reads in the history table only. Now, when about to INSERT a record into the public schema during a resync, an explicit check is made to see if the record alread
y exists. If it does, the INSERT is instead redirected to the history schema.
* Cleaned up the fence agent metadata when displaying to a user, converting the shell codes to underline a string with square brackets instead. We also now replace newlines with <br /> tags. Lastly, to help fence_azure_arm's metadata description to display cleanly, a check is made to format the table correctly.
* Began work on the Striker menu for handling fence device management
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Striker->get_fence_data() that reads/parses the unified fence metadata file created by tools/striker-parse-fence-agents.
* Created the new 'fences' database table and Database->insert_or_update_fences() to handle it.
* Added hosts -> host_ipmi that will, later, store information on how to access the host's IPMI interface, when available.
* Sketched out how the new Install Manifests are going to work.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_variables() where, if 'update_value_only' was set but not variable_uuid was passed or could be found, an (incomplete) INSERT would be attempted.
* Added support for generating module metadata when setting up local repos on Striker.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished (but not yet tested) the menu to manage alert recipients.
* Created Words->language_list() that creates a hash reference of available languages.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started work on Striker's notification recipient management page. Cleaned up the variable names in the mail_server management function.
* Added recipients -> recipient_units column to the sql schema.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got Striker to the point where it can save mail servers (not load existing or delete yet, though).
* Added a check to striker-parse-oui so that it only runs once per day.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->insert_or_update_mail_servers() to insert/update entries in the 'mail_servers' table.
* Got more work done on the email server menu. It now shows the entered values, but not yet save the data.
Signed-off-by: Digimer <digimer@alteeve.ca>
