* Finished initial Striker setup in tools/striker-auto-initialize-all. Started working on peering.
* Cleaned up the handling of converting UIDs to user names in Remote->add_target_to_known_hosts() and ->_call_ssh_keyscan().
* Did a bunch of white-space/alignment cleanup.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Get->os_type() to use 'cat' instead of Storage->read_file() because 'rsync' may not be available when it is called during striker-initialize-host calls.
* Updated Database methods to skip 'oui' and 'state' during resync.
* Updatedb striker-initialize-host to detect when it's initializing a CentOS Stream Node / DR Host and enable the HA repo.
* Created the tools/striker-auto-initialize-all tool, which is very much incomplete, that will allow for the rapid creation of a full Anvil! from freshly installed machines autonomously.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Reworked scan-ipimitool so that on nodes and dr hosts, it only scans itself. On strikers, it scans all hosts found in active Anvil! systems with a host_ipmi entry. `
* For all agents, reduced log verbosity to not push too much noise into anvil.log while scancore is running in the background.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Cluster->add_server() to now set failure timeouts to actual numbers instead of INFINITY after discovering that INFINITY doesn't work in those cases.
* Updated Databsae->get_hosts to now check if other entries have the same host name, and if so, to set their host_key to 'DELETED'. This should make it easier to handle when a hardware machine is replaced by new hardware but uses the same host_name.
* Updated Email->check_queue() to start and enable postfix.service if it's found to not be running.
* Updated Get->available_resources() to return '!!no_data!!' when a given host hasn't got any data in scan_lvm_vgs. Now use this in anvil-provision-server to exit if a node or dr host hasn't run scancore yet.
* Fixed a bug in scan-lvm where the pvs_uuid wasn't being loaded properly, preventing lost PVs, VGs and LVs from being flagged as deleted.
* Started work on anvil-migate-server, though it's far from complete.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Cluster->shutdown_server() where the wrong variable was being evaluated when checking the server state.
* Created DRBD->delete_resource() that deletes a resource's backing device and configuration. Note that this wipes the DRBD MD and and FS signatures before removing the LV. Updated DRBD->gather_data() to record the backing devices for volumes.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Cluster->parse_cib() when a server that is off wasn't setting 'status'.
* Renamed 'server::location::<server>::host' to '...::host_name' in several places.
* Got more work done on anvil-delete-server, up to the point where it calls the new Cluster->delete_server() method.
* Updated fence_pacemaker to call 'drbdadm adjust all' to dampen an issue where in-memory fence configs seem to change, preventing reconnection of the peer after it reboots from the fence. More testing needed on this issue.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created a new tools/striker-parse-os-list tool that parses 'osinfo-query os' and prints out entries for words.xml for any new OSes.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished DRBD->get_next_resource() that returns the next available minor and the next free TCP port (with two free ports available after it).
* Created Storage->get_storage_group_details() that pulls together the LVM, storage group members and storage groups into one block of data.
* Made more progress on tools/anvil-provision-server. It now gets up to the point of creating LVs, creating DRBD resource files, loading them, creating metadata and up'ing the resource. It doesn't yet (successfully) force a new resource to primary.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created the new method Cluster->get_primary_host_uuid() that returns the 'host_uuid' of the primary node in the given cluster. This is useful for external programs to figure out which node is primary. Example is provisioning a new server being assigned to the active node. Also created ->is_primary() that is a similar test to see if the active node is the primary node or not.
* Updated Cluster->parse_cib() and ->parse_crm_mon() to work on remote hosts.
* Updated Database->get_hosts() to store the short host names.
* Created Get->host_from_ip_address() that translates an IP address to a host_uuid and host_name, if it's an IP assigned currently to a known host.
* Created Network->find_target_ip() that simplifies finding which IP address to use when the caller wants to connect to a target host.
* Reworked the anvil-join-anvil to parse fence_arguments in a way that handles passwords with spaces in them.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up upload.pl now that it isn't responsible for loading the file details into the database. It only sets a job for the local Striker to process the file and move it into /mnt/shared/files, copy it to peer dashboards, then load jobs for Anvil! members to sync the new file.
* Created Database->get_files() and ->get_file_locations() to load the respective data.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got tools/striker-sync-shared to pick up 'upload::move_incoming' jobs, move the uploaded file to /mnt/shared/files/, copies it to peer dashboards, adds it to the 'files' table and adds it to 'file_locations'.
* Reworked the 'file_locations' table to now map files to Anvil! systems, not hosts. It simply tracks if a given file should be on Anvil! members or not. Later, striker-sync-shared on the Anvil! members will pull the file down.
* Updated Storage->get_file_stats() to record the file's mimetype.
* Fixed up a few issues in cgi-bin/upload.pl.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->check_agent_data() where the list of tables wasn't passed in, and thus the table list wasn't then passed on to Database->_find_behind_databases().
* Started work on a new method called Storage->parse_lsblk().
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_temperature() to accespt a 'delete' parameter (which, surprise, deletes a record).
* Updated (but not yet tested) the RPM .spec to require that 'core' and the other three packages are required to be the same version.
* Updated scan-ipmitool and scan-storcli scan agents to now delete temperature data belonging to lost sensors.
* Fixed tools/striker-manage-install-target to add multiple missing packages.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Alert->register() to take message variables using the 'variables' parameter.
* Added a 'cache' parameter to Database->insert_or_update_health() and ->insert_or_update_temperature(). When set, the SQL UPDATE/INSERT calls and pushed into the array reference set in 'cache'. This is to allow performance improvements when processing a large amount of sensor/device data.
* Updated Log->variables() to take a 'prefix' parameter that, when set, will prefix the string to each variable line.
* Updated scan-ipmitool to use Database->insert_or_update_health() and ->insert_or_update_temperature().
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created (but not finished) scan-apc-pdu
* Added support to tracking maintenance-mode for nodes in Cluster->parse_cib
* Created Remote->read_snmp_oid().
* Created Server->get_definition.
* Updated Server->get_status() to write-out server XML files on-demand.
* Finished scan-cluster.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed scan-storage to scan-lvm as we only really care about LVM data in this agent. A dedicated scan-drbd will be created later. Got the agent to parse the pvs/vgs/lvs data.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added support in anvil.conf to disable scan agents with 'scancore::<agent_name>::disable', and added handling this to agents. Also allowed for '--force' to override this setting.
* Updated ScanCore->agent_startup() to allow for empty scan agent table lists.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created 'Cluster->which_node' that returns 'node1' or 'node2' to indicate which node a host is.
* Continued working on scan_cluster; decided to make it not host-dependent.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Alert->register to take a hash reference for message variables to simplify when a caller plans to log and register an alert at the same time.
* Updated Convert->bytes_to_human_readable() to name the 'size' variable used internally for 'bytes' to actually be 'bytes' for better consistency.
* Created multiple new Database methods;
** ->check_condition_age() is meant to be used by scan agents to see how long a given condition has been in play (ie: how long ago power was lost to a UPS or a sensor became unreadable).
** ->insert_or_update_health() handles recording data to the new 'health' table, used for determining ideal hosts for servers between nodes.
** ->insert_or_update_power() handles recording data to the new 'power' table, used for determining how power events are handled.
** ->insert_or_update_temperature() handles recording temperature data to the new 'temperature' table, used to determine how thermal events are handled.
* Got a lot more done on the scan-hardware scan agent. Only part left now is post-scan health processing.
Signed-off-by: Digimer <digimer@alteeve.ca>
* More work done on Email->send_email() to, well, actually send email (which it isn't doing yet, but it's close).
* Updated Words->key() to include the bad key name when no entry for the requested key exists in the words.xml file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Tools->_set_defaults where the order the tables were sync'ed it caused primary/foreign keys would trigger DB errors when resync'ing in some cases.
* Created Database->log_connections to make it easier to log which databases are actively in use and other data about the connections.
* Fixed bugs in striker-manage-peers that (partly because of the above bugs) failed to connect to new peers properly.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got email server configuration under way. A mail server can now be configured via Email->_configure_for_server(), but more work is needed on when to switch between configs.
* Fixed some logging of passwords that wasn't being checked to see if secure logging was enabled or not.
* Fixed a bug in Striker where the back arrow in email config sub-sections weren't going back to the main email menu.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the anvil.conf option 'sys::privacy::strong' that controls if the Anvil! ever "calls home". Initially, this controls DRBD's usage flag.
* Updated DRBD->get_devices() to track resources by their 'by-res' names as well and by the normal '/dev/drbdX' devices.
* To mitigate https://bugzilla.redhat.com/show_bug.cgi?id=1868467, updated Get->bridges() to parse the normal (non-JSON) data if we get invalid JSON output.
* Updated anvil-join-anvil to not disable, and in fact enable, libvirtd on boot. With DRBD 9, the original fear of a user accidentally booting a VM that's running on the peer no longer is an issue. By enabling it and leaving it on, Striker dashboard users won't lose their virtual machine manager link unless the node powers off. Also enabled actually updating the job progress, completing this tool!
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up a lot of logging.
* Updated Cluster->parse_cib() to track if a stonith device has 'delay' set.
* Got a lot more work done on anvil-join-anvil's stonith processing, but it still isn't complete. Updated it to change shell user passwords as well.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed Database->get_ip_addresses() to clear stale IP addresses.
* Finished (for now, more testing needed) System->configure_ipmi! Also created System->test_ipmi() that handles trying lanplus and various password lengths, updating hosts -> host_ipmi on successful check.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got anvil-join-anvil to the point where is initializes and starts the cluster.
* Deleted the old ssh key handling logic in anvil-daemon.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Get->trusted_hosts() that finds the dashboards the host uses and, if the host is in an Anvil!, the peers in the same anvil.
* Created (but not finished yet) System->update_hosts() that will add and edit entries for all IPs to trusted hosts.
* Fixed a logging bug in Striker->load_manifest().
* Fixed a bug in System->call where, the the output from the shell call didn't end in a new-line, it would not parse the return code and lease the return code string appended to the shell output.
* Fixed a big in System->change_shell_user_password() where a new-line (\n) meant for the shell call wasn't escaped properly. There was also a duplicate 'return_code' variable preventing the actual return code from being read.
* Got more work done on anvil-join-anvil to update the hacluster password (when needed).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Update striker manifest run to add an entry into the 'anvils' table, and pass the anvil_uuid to the jobs rather than the various host_uuid's.
* Fixed a bug in the 'anvils' SQL procedure that copied data into the history schema (a few columns were missing).
* Updated anvil-configure-host to reboot when finished to be certain network changes have taken effect. Also updated the handling of virsh bridges to delete the autostart symlinks if libvirtd daemon isn't running.
* Added some logic to anvil-daemon to call 'anvil-update-states' with the -v{1,3} flag depending on the active debug level.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated 'variables' -> 'variable_source_uuid' to type 'uuid' and removed the 'not null' constraint.
* Updated Database->insert_or_update_variables() to check/update 'variables_source_table' and 'variables_source_uuid'.
* Created the 'trusts' database table which will, when done, tell anvil-daemon which users@machines to trust (setup passwordkess SSH).
* Created (but not finished) System->manage_authorized_keys() and moved the logic over to it from anvil-daemon.
* Changed the host types "dashboard" to "striker".
* Moved the following methods from 'System' to 'Get';
** System->get_host_type to Get->host_type
** System->get_bridges to Get->bridges
** System->get_free_memory to Get->free_memory
** System->get_os_type to Get->os_type
** System->get_uptime to Get->uptime
* Updated striker to include the host_uuid for the 'node1', 'node2' and (if chosen) 'dr1' when running a job manifest.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished the saving of a "run manifest" job menu. Included filtering out potential machines already in other Anvil! systems from the select box and updating the password fields to not trigger a browser to save/auto-complete the field.
* Fixed a bug in Database->get_hosts() caused by the attempt to immediately return with a 0 if it had been called before. Now a check is made in ->insert_or_update_manifests() where the recursive loop was possible.
* Updated the RPM spec to v.33 after releasing .32 after the last commit. Also added the core requirement for perl-Data-Validate-Domain.
Signed-off-by: Digimer <digimer@alteeve.ca>
** Needed to add a couple more packages to CentOS's package list.
** Changed the PXE kickstart template to create a dedicated '/boot' partition (raw partition or on RAID 1). This seems to be required now on 8.1.
** Added PXE's UEFI support to the template system (untested, but it's at least generated now).
* Filtered out 'debug' and 'verbose' options when configuring fence devices.
* Added an internet test to tools/striker-manage-install-target and skipped attempting to download packages when there's no internet. Also made loading the host OS info into a small function.
* Started creating the man pages.
Signed-off-by: Madison Kelly <mkelly@alteeve.ca>
* Fixed a bug (well, made a work-around for an issue without a known reproducer) where, on some occassion, a record will end up in the public table without being copied into the history schema. When this happens, the next resync would crash out because the resynd reads in the history table only. Now, when about to INSERT a record into the public schema during a resync, an explicit check is made to see if the record alread
y exists. If it does, the INSERT is instead redirected to the history schema.
* Cleaned up the fence agent metadata when displaying to a user, converting the shell codes to underline a string with square brackets instead. We also now replace newlines with <br /> tags. Lastly, to help fence_azure_arm's metadata description to display cleanly, a check is made to format the table correctly.
* Began work on the Striker menu for handling fence device management
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Striker->get_fence_data() that reads/parses the unified fence metadata file created by tools/striker-parse-fence-agents.
* Created the new 'fences' database table and Database->insert_or_update_fences() to handle it.
* Added hosts -> host_ipmi that will, later, store information on how to access the host's IPMI interface, when available.
* Sketched out how the new Install Manifests are going to work.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_variables() where, if 'update_value_only' was set but not variable_uuid was passed or could be found, an (incomplete) INSERT would be attempted.
* Added support for generating module metadata when setting up local repos on Striker.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->insert_or_update_mail_servers() to insert/update entries in the 'mail_servers' table.
* Got more work done on the email server menu. It now shows the entered values, but not yet save the data.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Accounts->read_cookies where, when a user's hash had expired, the logged error message didn't show the user's name.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where ip_addresses could break resync when 2+ machines had the same IP (ie: 192.168.122.1).
* Updated logging of DB transactions to show the DB host's IP instead of the UUID.
* Updated Get->date_and_time to take a 'use_utc' parameter to return the time using GMT time instead of the host's TZ.
* Updated anvil-daemon to periodically call tools/anvil-update-states. Also upadted anvil-daemon to delay daily jobs by 2 hours except for the dashboard with the highest sorted UUID to minimize dual runs of tasks that only need to run once per day per cluster.
Signed-off-by: Digimer <digimer@alteeve.ca>
