* Added the alteeve-repo-setup man page and updated it to show that when called with '-h'.

* Updated scancore to use the new Get->switches() list parameter.

Signed-off-by: Digimer <digimer@alteeve.ca>

man/Makefile.am

@@ -7,4 +7,6 @@ dist_man5_MANS		= \
 			  anvil.conf.5
 
 dist_man8_MANS		= \
-			  anvil-daemon.8
+			  alteeve-repo-setup.8 \
+			  anvil-daemon.8 \
+			  scancore.8

man/alteeve-repo-setup.8

@@ -0,0 +1,52 @@
+.\" Manpage for the Alteeve! repo setup tool
+.\" Contact mkelly@alteeve.com to report issues, concerns or suggestions.
+.TH alteeve-repo-setup "8" "August 02 2022" "Anvil! Intelligent Availability™ Platform"
+.SH NAME
+alteeve-repo-setup \- Tool used to configure the Anvil! repository.
+.SH SYNOPSIS
+.B alteeve-repo-setup 
+\fI\,<command> \/\fR[\fI\,options\/\fR]
+.SH DESCRIPTION
+alteeve-repo-setup \- This tool configures the local repository needed to install the Anvil! Intelligent Availability™ platform. The repository will be based on the OS running on this system. For example, if the host is RHEL 8, the repo will be configured for 'rhel-8'. Similarly, if this host is CentOS 8 Stream, the repo will be configured for 'centos-8-stream'. 
+.TP
+There are two main repos for the Anvil! system; 
+.TP
+- community:  This repo is free for use, and tracks the latest available release of the Anvil! platform.
+.TP
+For support on the Community version is provided through;
+.TP
+* Alteeve Wiki      - https://wiki.alteeve.com/
+.TP
+* Alteeve Support   - https://www.alteeve.com/c/supportandresources/contact-support/
+.TP
+* ClusterLabs Users - https://lists.clusterlabs.org/mailman/listinfo/users
+.TP
+* ClusterLabs on Libera Chat's #clusterlabs channel
+.TP
+- enterprise: This repo has additional testing and hardening, but is slower to get new features. 
+.TP
+To access our enterprise repository with Alteeve support please visit: 
+.TP
+* https://www.alteeve.com/c/supportandresources/contact-support/
+.SH OPTIONS
+.TP
+\-?, \-h, \fB\-\-help\fR
+Show this man page.
+.TP
+\fB\-\-log-secure\fR
+When logging, record sensitive data, like passwords.
+.TP
+\-d, \fB\-\-debug\fR
+This tool does not use the main Anvil::Tools modules, so debugging is limited to messaged shown during the run. This enables those debug messages.
+.SS "Commands:"
+.TP
+\-k, \fB\-\---key\fR <uuid>
+If you have a key, provide it this way. This will configure the host to use the enterprise repository.
+.TP
+\-y, \fB\-\-yes\fR
+Do not ask to confirm the use of the community repository.
+.IP
+.SH AUTHOR
+Written by Madison Kelly, Alteeve staff and the Anvil! project contributors.
+.SH "REPORTING BUGS"
+Report bugs to users@clusterlabs.org

man/anvil-daemon.8

@@ -30,7 +30,7 @@ This skips the one-time, start-up tasks and just goes into the main-loop.
 This will prevent any pending jobs from being picked up and started in this run. Note that other job checks will still happen.
 .TP
 \fB\-\-run-once\fR
-This will tell the program to exit after runn the main loop once.
+This will tell the program to exit after running the main loop once.
 .TP
 \fB\-\-startup-only\fR
 This will tell the program to exit after running the start up tasks, so the main loop won't run.

man/scancore.8

@@ -0,0 +1,32 @@
+.\" Manpage for the ScanCore daemon. 
+.\" Contact mkelly@alteeve.com to report issues, concerns or suggestions.
+.TH scancore "8" "July 29 2022" "Anvil! Intelligent Availability™ Platform"
+.SH NAME
+scancore \- ScanCore systemd daemon for the M3 Anvil! Cluster.
+.SH SYNOPSIS
+.B scancore 
+\fI\,<command> \/\fR[\fI\,options\/\fR]
+.SH DESCRIPTION
+scancore \- ScanCore provides all of the decision engine logic that provides all of the autonomous operation logic. How exactly it behaves depends on whether it is running on a Striker dashboard, Anvil! sub-node or DR host.
+.SH OPTIONS
+.TP
+\-?, \-h, \fB\-\-help\fR
+Show this man page.
+.TP
+\fB\-\-log-secure\fR
+When logging, record sensitive data, like passwords.
+.TP
+\-v, \-vv, \-vvv
+Set the log level to 1, 2 or 3 respectively. Be aware that level 3 generates a significant amount of log data.
+.SS "Commands:"
+.TP
+\fB\-\-purge\fR
+If passed, all scancore agents will be invoked with '\fB\-\-purge\fR'. This will cause all ScanCore data to be purged from the databases.
+.TP
+\fB\-\-run-once\fR
+This will tell the program to exit after one run of all scan agents and after doing to post-scan logic.
+.IP
+.SH AUTHOR
+Written by Madison Kelly, Alteeve staff and the Anvil! project contributors.
+.SH "REPORTING BUGS"
+Report bugs to users@clusterlabs.org

tools/anvil-daemon

@@ -25,28 +25,6 @@
 # - For later; 'reboot --force --force' immediately kills the OS, like disabling ACPI on EL6 and hitting the 
 #   power button. Might be useful in ScanCore down the road.
 # 
-# Switches:
-# 
-# --main-loop-only 
-# 
-#   This skips the one-time, start-up tasks and just goes into the main-loop,
-# 
-# --no-start
-# 
-#   This will prevent any pending jobs from being picked up and started in this run. Note that other job checks will still happen.
-# 
-# --refresh-json 
-#   
-#   This just updates the JSON files used by the web interface. It is the same as '--run-once --main-loop-only --no-start'
-#   
-# --run-once
-# 
-#   This will tell the program to exit after runn the main loop once.
-# 
-# --startup-only
-# 
-#   This will tell the program to exit after running the start up tasks, so the main loop won't run.
-# 
 
 use strict;
 use warnings;

tools/scancore

@@ -68,9 +68,8 @@ $anvil->data->{scancore} = {
 $anvil->Storage->read_config();
 
 # Read switches
-$anvil->data->{switches}{purge}      = "";
+$anvil->Get->switches({list => ["purge", "run-once"], man => $THIS_FILE});
-$anvil->data->{switches}{'run-once'} = "";
+$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => $anvil->data->{switches}});
-$anvil->Get->switches;
 $anvil->Log->entry({source => $THIS_FILE, line => __LINE__, 'print' => 1, level => 1, key => "log_0115", variables => { program => $THIS_FILE }});
 
 # If purging, also set 'run-once'.