* Created ScanCore->check_temperature_direct() based around that start logic from ScanCore->post_scan_analysis_striker() temperature check, and updated the later to use the former.

* Updated the logic of when to boot a node or DR host that was found to be off for unknown reasons to require both poewr and temperature to be OK, and checks against the new 'feature::scancore::disable::boot-unknown-stop' config variable.

Signed-off-by: Digimer <digimer@alteeve.ca>

Anvil/Tools/Database.pm

@@ -1363,7 +1363,7 @@ sub connect
 	foreach my $uuid (sort {$a cmp $b} keys %{$anvil->data->{database}})
 	{
 		# Periodically, autovivication causes and empty key to appear.
-		$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { uuid => $uuid }});
+		$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { uuid => $uuid }});
 		next if ((not $uuid) or (not $anvil->Validate->uuid({uuid => $uuid})));
 		
 		if (($db_uuid) && ($db_uuid ne $uuid))
@@ -1387,7 +1387,7 @@ sub connect
 		my $name     = $anvil->data->{database}{$uuid}{name};
 		my $user     = $anvil->data->{database}{$uuid}{user};
 		my $password = $anvil->data->{database}{$uuid}{password};
-		$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { 
+		$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { 
 			host     => $host,
 			port     => $port,
 			name     => $name,

Anvil/Tools/ScanCore.pm

@@ -21,6 +21,7 @@ my $THIS_FILE = "ScanCore.pm";
 # check_health
 # check_power
 # check_temperature
+# check_temperature_direct
 # count_servers
 # post_scan_analysis
 # post_scan_analysis_dr
@@ -1160,6 +1161,109 @@ ORDER BY
 }
 
 
+=head2 check_temperature_direct
+
+This calls a target's IPMI interface to check the temperature sensors that are available. The status is returns as;
+
+ 0 = Failed to read temperature sensors / IPMI unavailable
+ 1 = All available temperatures are nominal.
+ 2 = One of more sensors are in warning or critical.
+
+Parameters;
+
+=head3 host_uuid (Optional, default Get->host_uuid() )
+
+This is the host's UUID to look at. 
+
+=cut
+sub check_temperature_direct
+{
+	my $self      = shift;
+	my $parameter = shift;
+	my $anvil     = $self->parent;
+	my $debug     = defined $parameter->{debug} ? $parameter->{debug} : 3;
+	$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "ScanCore->check_temperature_direct()" }});
+	
+	my $host_uuid = defined $parameter->{host_uuid} ? $parameter->{host_uuid} : $anvil->Get->host_uuid;
+	$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { 
+		host_uuid => $host_uuid, 
+	}});
+	
+	#  * 0 - Failed to read temperature sensors / IPMI unavailable
+	#  * 1 - All available temperatures are nominal
+	#  * 2 - One of more sensors are in warning or critical.
+	my $status = 0;
+	if ((not defined $anvil->data->{machine}{host_uuid}{$host_uuid}{hosts}{host_ipmi}) or (not $anvil->data->{machine}{host_uuid}{$host_uuid}{hosts}{host_ipmi}))
+	{
+		$anvil->Database->get_hosts_info({debug => $debug});
+	}
+	my $host_ipmi = $anvil->data->{machine}{host_uuid}{$host_uuid}{hosts}{host_ipmi};
+	my $host_name = $anvil->data->{machine}{host_uuid}{$host_uuid}{hosts}{host_name};
+	$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { 
+		host_ipmi => $host_ipmi,
+		host_name => $host_name, 
+	}});
+	
+	my ($ipmitool_command, $ipmi_password) = $anvil->Convert->fence_ipmilan_to_ipmitool({
+		debug                 => 2,
+		fence_ipmilan_command => $host_ipmi,
+	});
+	$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { 
+		ipmitool_command => $ipmitool_command,
+		ipmi_password    => $anvil->Log->is_secure($ipmi_password), 
+	}});
+	
+	if ((not $ipmitool_command) or ($ipmitool_command eq "!!error!!"))
+	{
+		# No IPMI tool to call.
+		$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0573", variables => { host_name => $host_name }});
+		return($status);
+	}
+	
+	$anvil->System->collect_ipmi_data({
+		debug            => $debug, 
+		host_name        => $host_name, 
+		ipmitool_command => $ipmitool_command, 
+		ipmi_password    => $ipmi_password, 
+	});
+	
+	# Now look for thermal values.
+	foreach my $sensor_name (sort {$a cmp $b} keys %{$anvil->data->{ipmi}{$host_name}{scan_ipmitool_sensor_name}})
+	{
+		my $current_value = $anvil->data->{ipmi}{$host_name}{scan_ipmitool_sensor_name}{$sensor_name}{scan_ipmitool_value_sensor_value};
+		my $units         = $anvil->data->{ipmi}{$host_name}{scan_ipmitool_sensor_name}{$sensor_name}{scan_ipmitool_sensor_units};
+		my $sensor_status = $anvil->data->{ipmi}{$host_name}{scan_ipmitool_sensor_name}{$sensor_name}{scan_ipmitool_sensor_status};
+		$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { 
+			current_value => $current_value, 
+			sensor_name   => $sensor_name, 
+			units         => $units, 
+			sensor_status => $sensor_status, 
+		}});
+		
+		# If this is a temperature, check to see if it is outside its nominal range and, if
+		# so, record it into a hash for loading into ScanCore's 'temperature' table.
+		if ($units eq "C")
+		{
+			if ($sensor_status eq "ok")
+			{
+				# We've found at least one temperature sensor. Set status to '1' if not previously set
+				$status = 1 if not $status;
+				$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { status => $status }});
+			}
+			else
+			{
+				# Sensor isn't OK yet.
+				$status = 2 if not $status;
+				$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { status => $status }});
+			}
+		}
+	}
+	
+	$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { status => $status }});
+	return($status);
+}
+
+
 =head2 count_servers
 
 This returns the number of servers running on a given host, as reported by ScanCore (specifically, by counting the number of servers running on the host from the C<< servers >> table). It also counts the total amount of RAM in use by hosted servers. 
@@ -2527,9 +2631,7 @@ LIMIT 1;";
 		if (not $stop_reason)
 		{
 			$stop_reason = "unknown";
-			$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { stop_reason => $stop_reason }});
 			$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0565", variables => { host_name => $host_name }});
-			
 		}
 		
 		if ($stop_reason eq "user")
@@ -2538,7 +2640,71 @@ LIMIT 1;";
 			$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0566", variables => { host_name => $host_name }});
 			next;
 		}
-		elsif (($stop_reason eq "power") or ($stop_reason eq "unknown"))
+		elsif ($stop_reason eq "unknown")
+		{
+			# Check both power and temp.
+			if ((not defined $anvil->data->{feature}{scancore}{disable}{'boot-unknown-stop'}) or (not exists $anvil->data->{feature}{scancore}{disable}{'boot-unknown-stop'}) or ($anvil->data->{feature}{scancore}{disable}{'boot-unknown-stop'} eq ""))
+			{
+				$anvil->data->{feature}{scancore}{disable}{'boot-unknown-stop'} = 1;
+			}
+			if (not $anvil->data->{feature}{scancore}{disable}{'boot-unknown-stop'})
+			{
+				# Ignore. 
+				$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0671", variables => { host_name => $host_name }});
+			}
+			else
+			{
+				# Evaluate for boot.
+				$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0672", variables => { host_name => $host_name }});
+				
+				# Check power 
+				$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0567", variables => { host_name => $host_name }});
+				my ($power_health, $shortest_time_on_batteries, $highest_charge_percentage, $estimated_hold_up_time) = $anvil->ScanCore->check_power({
+					debug      => $debug,
+					anvil_uuid => $anvil_uuid,
+					anvil_name => $anvil_name,
+					host_uuid  => $host_uuid,
+				});
+				$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { 
+					power_health               => $power_health,
+					shortest_time_on_batteries => $shortest_time_on_batteries, 
+					highest_charge_percentage  => $highest_charge_percentage, 
+					estimated_hold_up_time     => $estimated_hold_up_time, 
+				}});
+				
+				# Check temp.
+				my ($temp_health) = $anvil->ScanCore->check_temperature_direct({
+					debug     => $debug,
+					host_uuid => $host_uuid, 
+				});
+				$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { temp_health => $temp_health }});
+				
+				### Temp
+				# * 0 = Failed to read temperature sensors / IPMI unavailable
+				# * 1 = All available temperatures are nominal.
+				# * 2 = One of more sensors are in warning or critical.
+				### Power
+				# * 0 = No UPSes found for the host
+				# * 1 = One or more UPSes found and at least one has input power from mains.
+				# * 2 = One or more UPSes found, all are running on battery.
+				if (($temp_health eq "1") && ($power_health eq "1"))
+				{
+					$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0673", variables => { host_name => $host_name }});
+					
+					$shell_call =~ s/--action status/ --action on/;
+					my ($output, $return_code) = $anvil->System->call({debug => $debug, timeout => 30, shell_call => $shell_call});
+					$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { shell_call => $shell_call }});
+					
+					# Mark it as booting.
+					$anvil->Database->update_host_status({
+						debug       => $debug,
+						host_uuid   => $host_uuid,
+						host_status => "booting",
+					});
+				}
+			}
+		}
+		elsif ($stop_reason eq "power")
 		{
 			# Check now if the power is OK
 			$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0567", variables => { host_name => $host_name }});
@@ -2590,72 +2756,20 @@ LIMIT 1;";
 		}
 		elsif ($stop_reason eq "thermal")
 		{
-			### TODO: Switch to  ->check_temperature()
 			# Check now if the temperature is OK.
 			$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0568", variables => { host_name => $host_name }});
-			
+			my ($temp_health) = $anvil->ScanCore->check_temperature_direct({
-			my ($ipmitool_command, $ipmi_password) = $anvil->Convert->fence_ipmilan_to_ipmitool({
+				debug     => $debug,
-				debug                 => 2,
+				host_uuid => $host_uuid, 
-				fence_ipmilan_command => $host_ipmi,
-			});
-			$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { 
-				ipmitool_command => $ipmitool_command,
-				ipmi_password    => $anvil->Log->is_secure($ipmi_password), 
-			}});
-			
-			if ((not $ipmitool_command) or ($ipmitool_command eq "!!error!!"))
-			{
-				# No IPMI tool to call.
-				$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0573", variables => { host_name => $host_name }});
-				next;
-			}
-			
-			$anvil->System->collect_ipmi_data({
-				host_name        => $host_name, 
-				ipmitool_command => $ipmitool_command, 
-				ipmi_password    => $ipmi_password, 
 			});
 			
-			# Now look for thermal values.
+			### Temp
-			my $sensor_found    = 0;
+			# * 0 = Failed to read temperature sensors / IPMI unavailable
-			my $temperatures_ok = 1;
+			# * 1 = All available temperatures are nominal.
-			foreach my $sensor_name (sort {$a cmp $b} keys %{$anvil->data->{ipmi}{$host_name}{scan_ipmitool_sensor_name}})
+			# * 2 = One of more sensors are in warning or critical.
-			{
+			$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { temp_health => $temp_health }});
-				my $current_value = $anvil->data->{ipmi}{$host_name}{scan_ipmitool_sensor_name}{$sensor_name}{scan_ipmitool_value_sensor_value};
-				my $units         = $anvil->data->{ipmi}{$host_name}{scan_ipmitool_sensor_name}{$sensor_name}{scan_ipmitool_sensor_units};
-				my $status        = $anvil->data->{ipmi}{$host_name}{scan_ipmitool_sensor_name}{$sensor_name}{scan_ipmitool_sensor_status};
-				$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { 
-					current_value => $current_value, 
-					sensor_name   => $sensor_name, 
-					units         => $units, 
-					status        => $status, 
-				}});
-				
-				# If this is a temperature, check to see if it is outside its nominal range and, if
-				# so, record it into a hash for loading into ScanCore's 'temperature' table.
-				if ($units eq "C")
-				{
-					if (not $sensor_found)
-					{
-						# We've found at least one temperature sensor.
-						$sensor_found = 1;
-						$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { sensor_found => $sensor_found }});
-					}
-					
-					if ($status ne "ok")
-					{
-						# Sensor isn't OK yet.
-						$temperatures_ok = 0;
-						$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { temperatures_ok => $temperatures_ok }});
-					}
-				}
-			}
 			
-			$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { 
+			if ($temp_health eq "1")
-				sensor_found    => $sensor_found,
-				temperatures_ok => $temperatures_ok, 
-			}});
-			if (($sensor_found) && ($temperatures_ok))
 			{
 				### TODO: We'll want to revisit M2's restart cooldown logic. It never 
 				###       actually proved useful in M2, but it doesn't mean it wouldn't help

anvil.conf

@@ -11,6 +11,11 @@ sys::privacy::strong						=	0
 # feature, set this to '1'.
 feature::scancore::disable::preventative-live-migration		=	0
 
+# If a node is found to be powered off, and there is no reason recorded in the database, it will be booted.
+# The assumption is that an accidental power off occurred. If you would like to have nodes that power off
+# stay off until manually started, set this to '0'
+#feature::scancore::disable::boot-unknown-stop			=	1
+
 ### Database
 # Database connections;
 # 

share/words.xml

@@ -1947,7 +1947,7 @@ The file: [#!variable!file!#] needs to be updated. The difference is:
 		<key name="log_0562">The host: [#!variable!host_name!#] is up, no need to check if it needs booting.</key>
 		<key name="log_0563">The host: [#!variable!host_name!#] couldn't be reached directly, but IPMI reports that it is up. Could the IPMI BMC be hung or unplugged?</key>
 		<key name="log_0564">The host: [#!variable!host_name!#] is off. Will check now if it should be booted.</key>
-		<key name="log_0565">The host: [#!variable!host_name!#] has no stop reason, so we'll boot it up in case it lost power without warning.</key>
+		<key name="log_0565">The host: [#!variable!host_name!#] has no stop reason, so we'll check to see if we should power it on, in case it lost power or overheated without warning.</key>
 		<key name="log_0566">The host: [#!variable!host_name!#] was stopped by the user, so we'll leave it off.</key>
 		<key name="log_0567">The host: [#!variable!host_name!#] was powered off because of power loss. Checking to see if it is now safe to restart it.</key>
 		<key name="log_0568">The host: [#!variable!host_name!#] was powered off because of thermal issues. Checking to see if it is now safe to restart it.</key>
@@ -1955,7 +1955,7 @@ The file: [#!variable!file!#] needs to be updated. The difference is:
 		<key name="log_0570">Unable to parse the install manifest uuid: [#!variable!manifest_uuid!#] for the Anvil! [#!variable!anvil_name!#]. As such, unable to determine what UPSes power the machine: [#!variable!host_name!#]. Unable to determine if the power feeding this node is OK or not.</key>
 		<key name="log_0571">The UPS referenced by the 'power_uuid': [#!variable!power_uuid!#] under the host: [#!variable!host_name!#] has no record of being on mains power, so we can't determine how long it's been on batteries. Setting the "shortest time on batteries" to zero seconds.</key>
 		<key name="log_0572">Marking the host as 'online' and clearing the host's stop reason.</key>
-		<key name="log_0573">The host: [#!variable!host_name!#] is off, but there appears to be a problem translating the 'fence_ipmilan' into a workable 'ipmitool' command. Unable to check the thermal data of the host, and so, unable to determine if it's safe to boot the node.</key>
+		<key name="log_0573">There appears to be a problem translating the 'fence_ipmilan' into a workable 'ipmitool' command for the host: [#!variable!host_name!#]. Unable to check the thermal data of the host.</key>
 		<key name="log_0574">The host: [#!variable!host_name!#] was powered off because of power loss. Power is back and the UPSes are sufficiently charged. Booting it back up now.</key>
 		<key name="log_0575">The host: [#!variable!host_name!#] was powered off for thermal reasons. All available thermal sensors read as OK now. Booting it back up now.</key>
 		<key name="log_0576">The file: [#!variable!file_path!#] isn't on (or isn't the right size on) Striker: [#!variable!host_name!#]. Not using it to pull from.</key>
@@ -2061,6 +2061,9 @@ The file: [#!variable!file!#] needs to be updated. The difference is:
 		<key name="log_0668">No password for the database on the host with UUID: [#!variable!uuid!#], skipping it.</key>
 		<key name="log_0669">The firewalld daemon isn't running, skipping firewall setup.</key>
 		<key name="log_0670">The postgresql server is installed.</key>
+		<key name="log_0671">The host: [#!variable!host_name!#] was powered off for an unknown reason, and 'feature::scancore::disable::boot-unknown-stop' is set to: [#!data!feature::scancore::disable::boot-unknown-stop!#]. Will not boot this host.</key>
+		<key name="log_0672">The host: [#!variable!host_name!#] was powered off for an unknown reason, and 'feature::scancore::disable::boot-unknown-stop' is set to: [#!data!feature::scancore::disable::boot-unknown-stop!#]. If power and temperature looks good, we'll boot it.</key>
+		<key name="log_0673">The host: [#!variable!host_name!#] has good power and temperature readings. Booting it back up now.</key>
 		
 		<!-- Messages for users (less technical than log entries), though sometimes used for logs, too. -->
 		<key name="message_0001">The host name: [#!variable!target!#] does not resolve to an IP address.</key>