seasharp
/
anvil
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

* WIP: Working on a new method of failing over between which Striker is the active database, instead of running N-number of databases all the time.

Browse Source 
* Created Database->backup_database() that creates a pg_dump of the active database.
* Created Database->load_database() that loads the database from a flat file, optionally creating a backup before doing so, and using iptables to block access during the process.
* Updated Database->configure_pgsql() to not start the postgresql daemon unless it just initialized the DB.
* Much work, not yet complete, to Database->connect() to stop after the first successful connection. Added logic that, if not connection was established and the host is a Striker, to load a peer's backup, if it exists, and then start the local daemon.
* Updated anvil-daemon to now have a section to run tasks on a ten minute cycle, which will later be used for the primary Striker to dump / copy its database to peer(s).

Signed-off-by: Madison Kelly <mkelly@alteeve.ca>
main
Madison Kelly 3 years ago
parent 6664c5b77f
commit 922899ea78
6 changed files with 609 additions and 100 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 11
      Anvil/Tools.pm
  2. 511
      Anvil/Tools/Database.pm
  3. 1
      Anvil/Tools/Storage.pm
  4. 43
      notes
  5. 32
      share/words.xml
  6. 27
      tools/anvil-daemon

11
Anvil/Tools.pm
Unescape View File

@ -874,10 +874,14 @@ sub _set_defaults
locking_reap_age => 300, locking_reap_age => 300,
log_transactions => 0, log_transactions => 0,
maximum_batch_size => 25000, maximum_batch_size => 25000,
# NOTE: Do NOT change this unless you are certain all machines that use this host
# have been likewise updated!
name => "anvil", name => "anvil",
read_uuid => "", read_uuid => "",
test_table => "hosts", test_table => "hosts",
timestamp => "", timestamp => "",
# NOTE: Do NOT change this unless you are certain all machines that use this host
# have been likewise updated!
user => "admin", user => "admin",
use_handle => "", use_handle => "",
}, },
@ -1077,6 +1081,7 @@ sub _set_paths
html => "/var/www/html", html => "/var/www/html",
ifcfg => "/etc/sysconfig/network-scripts", ifcfg => "/etc/sysconfig/network-scripts",
journald => "/var/log/journal", journald => "/var/log/journal",
pgsql => "/var/lib/pgsql/",
resource_status => "/sys/kernel/debug/drbd/resources", resource_status => "/sys/kernel/debug/drbd/resources",
scan_agents => "/usr/sbin/scancore-agents", scan_agents => "/usr/sbin/scancore-agents",
shared => { shared => {
@ -1146,6 +1151,7 @@ sub _set_paths
dnf => "/usr/bin/dnf", dnf => "/usr/bin/dnf",
drbdadm => "/usr/sbin/drbdadm", drbdadm => "/usr/sbin/drbdadm",
drbdsetup => "/usr/sbin/drbdsetup", drbdsetup => "/usr/sbin/drbdsetup",
dropdb => "/usr/bin/dropdb",
echo => "/usr/bin/echo", echo => "/usr/bin/echo",
ethtool => "/usr/sbin/ethtool", ethtool => "/usr/sbin/ethtool",
expect => "/usr/bin/expect", expect => "/usr/bin/expect",
@ -1167,6 +1173,10 @@ sub _set_paths
ip => "/usr/sbin/ip", ip => "/usr/sbin/ip",
'ipmi-oem' => "/usr/sbin/ipmi-oem", 'ipmi-oem' => "/usr/sbin/ipmi-oem",
ipmitool => "/usr/bin/ipmitool", ipmitool => "/usr/bin/ipmitool",
### NOTE: When System->manage_firewall() is done, search for and replace all
### instances where iptables is called and replace with firewall-cmd
### calls
iptables => "/usr/sbin/iptables".
'iptables-save' => "/usr/sbin/iptables-save", 'iptables-save' => "/usr/sbin/iptables-save",
journalctl => "/usr/bin/journalctl", journalctl => "/usr/bin/journalctl",
logger => "/usr/bin/logger", logger => "/usr/bin/logger",
@ -1196,6 +1206,7 @@ sub _set_paths
pcs => "/usr/sbin/pcs", pcs => "/usr/sbin/pcs",
perccli64 => "/opt/MegaRAID/perccli/perccli64", perccli64 => "/opt/MegaRAID/perccli/perccli64",
ping => "/usr/bin/ping", ping => "/usr/bin/ping",
pg_dump => "/usr/bin/pg_dump",
pgrep => "/usr/bin/pgrep", pgrep => "/usr/bin/pgrep",
ps => "/usr/bin/ps", ps => "/usr/bin/ps",
psql => "/usr/bin/psql", psql => "/usr/bin/psql",

511
Anvil/Tools/Database.pm
Unescape View File

@ -17,6 +17,7 @@ my $THIS_FILE = "Database.pm";
### Methods; ### Methods;
# archive_database # archive_database
# backup_database
# check_file_locations # check_file_locations
# check_lock_age # check_lock_age
# check_for_schema # check_for_schema
@ -78,6 +79,7 @@ my $THIS_FILE = "Database.pm";
# insert_or_update_upses # insert_or_update_upses
# insert_or_update_users # insert_or_update_users
# insert_or_update_variables # insert_or_update_variables
# load_database
# lock_file # lock_file
# locking # locking
# manage_anvil_conf # manage_anvil_conf
@ -300,6 +302,80 @@ sub archive_database
} }
=head2 backup_database
This backs up the database to the C<< path::directories::pgsql >> directory as the file name C<< anvil_pg_dump.<host_uuid>.out >>.
If the backup is successful, C<< 0 >> is returned. If there is a problem, C<< !!error!! >> is returned.
B<< Note >>: This method must be called by the root user.
B<< Note >>: If C<< sys::database::name >> has been changed, the dump file name will match.
This method takes no parameters.
=cut
sub backup_database
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "Database->backup_database()" }});
# Only the root user can do this
if (($< != 0) && ($> != 0))
{
# Not root
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0352"});
return('!!error!!');
}
my $start_time = time;
my $dump_file = $anvil->data->{path}{directories}{pgsql}."/".$anvil->data->{sys}{database}{name}."_db_dump.".$anvil->Get->host_uuid().".out";
my $dump_call = $anvil->data->{path}{exe}{su}." - postgres -c \"".$anvil->data->{path}{exe}{pg_dump}." ".$anvil->data->{sys}{database}{name}." > ".$dump_file."\"";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
dump_file => $dump_file,
dump_call => $dump_call,
}});
my ($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $dump_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
if ($return_code)
{
# Dump failed.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0351", variables => {
shell_call => $dump_call,
return_code => $return_code,
output => $output,
}});
# Clear the out file.
if (-e $dump_path)
{
unlink $dump_path;
}
return('!!error!!');
}
# Record the stats
$anvil->Storage->get_file_stats({debug => $debug, file_path => $dump_file});
my $dump_time = time - $start_time;
my $size = $anvil->Convert->bytes_to_human_readable({'bytes' => $anvil->data->{file_stat}{$dump_file}{size}});
my $size_bytes = $anvil->Convert->add_commas({number => $anvil->data->{file_stat}{$dump_file}{size}});
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0654", variables => {
file => $dump_file,
took => $dump_time,
size => $size,
size_bytes => $size_bytes,
}});
return(0);
}
=head2 check_file_locations =head2 check_file_locations
This method checks to see that there is a corresponding entry in C<< file_locations >> for all Anvil! systems and files in the database. Any that are found to be missing will be set to C<< file_location_active >> -> c<< false >>. This method checks to see that there is a corresponding entry in C<< file_locations >> for all Anvil! systems and files in the database. Any that are found to be missing will be set to C<< file_location_active >> -> c<< false >>.
@ -722,16 +798,13 @@ sub configure_pgsql
return(1); return(1);
} }
# First, is it running? # First, is it running and is it initialized?
my $initialized = 0;
my $running = $anvil->System->check_daemon({debug => $debug, daemon => $anvil->data->{sys}{daemon}{postgresql}}); my $running = $anvil->System->check_daemon({debug => $debug, daemon => $anvil->data->{sys}{daemon}{postgresql}});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { running => $running }}); $anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { running => $running }});
if ((not $running) && (not -e $anvil->data->{path}{configs}{'pg_hba.conf'}))
if (not $running)
{ {
# Do we need to initialize the databae? # Initialize. Record that we did so, so that we know to start the daemon.
if (not -e $anvil->data->{path}{configs}{'pg_hba.conf'})
{
# Initialize.
my ($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $anvil->data->{path}{exe}{'postgresql-setup'}." initdb", source => $THIS_FILE, line => __LINE__}); my ($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $anvil->data->{path}{exe}{'postgresql-setup'}." initdb", source => $THIS_FILE, line => __LINE__});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { output => $output, return_code => $return_code }}); $anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { output => $output, return_code => $return_code }});
@ -747,12 +820,14 @@ sub configure_pgsql
# Initialized! # Initialized!
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0055"}); $anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0055"});
# Enable it on boot. $initialized = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { initialized => $initialized }});
# Enable it on boot. When two or more are available, one will shut down.
my $return_code = $anvil->System->enable_daemon({debug => $debug, daemon => $anvil->data->{sys}{daemon}{postgresql}}); my $return_code = $anvil->System->enable_daemon({debug => $debug, daemon => $anvil->data->{sys}{daemon}{postgresql}});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { return_code => $return_code }}); $anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { return_code => $return_code }});
} }
} }
}
# Setup postgresql.conf, if needed # Setup postgresql.conf, if needed
my $postgresql_conf = $anvil->Storage->read_file({debug => $debug, file => $anvil->data->{path}{configs}{'postgresql.conf'}}); my $postgresql_conf = $anvil->Storage->read_file({debug => $debug, file => $anvil->data->{path}{configs}{'postgresql.conf'}});
@ -858,6 +933,9 @@ sub configure_pgsql
# Start or restart the daemon? # Start or restart the daemon?
if (not $running) if (not $running)
{
# Did we initialize?
if ($initialized)
{ {
# Start the daemon. # Start the daemon.
my $return_code = $anvil->System->start_daemon({daemon => $anvil->data->{sys}{daemon}{postgresql}}); my $return_code = $anvil->System->start_daemon({daemon => $anvil->data->{sys}{daemon}{postgresql}});
@ -874,6 +952,7 @@ sub configure_pgsql
return("!!error!!"); return("!!error!!");
} }
} }
}
elsif (($update_postgresql_file) or ($update_pg_hba_file)) elsif (($update_postgresql_file) or ($update_pg_hba_file))
{ {
# Reload # Reload
@ -1082,6 +1161,10 @@ This module will return the number of databases that were successfully connected
Parameters; Parameters;
=head3 all (optional, default '0')
If this is set, all available databases will be connected to. This will also allow resync's to run as needed.
=head3 check_for_resync (optional, default 0) =head3 check_for_resync (optional, default 0)
If set to C<< 1 >>, and there are 2 or more databases available, a check will be make to see if the databases need to be resync'ed or not. This is also set if the command line switch C<< --resync-db >> is used. If set to C<< 1 >>, and there are 2 or more databases available, a check will be make to see if the databases need to be resync'ed or not. This is also set if the command line switch C<< --resync-db >> is used.
@ -1104,6 +1187,10 @@ If set, the connection will be made only to the database server matching the UUI
If set to C<< 1 >>, no attempt to ping a target before connection will happen, even if C<< database::<uuid>::ping = 1 >> is set. If set to C<< 1 >>, no attempt to ping a target before connection will happen, even if C<< database::<uuid>::ping = 1 >> is set.
=head3 retry (optional, default '0')
This method will try to recall itself if this is a Striker and it found no available databases, and so became primary. If this is set, it won't try to become primary a second time.
=head3 sensitive (optional, default '0') =head3 sensitive (optional, default '0')
If set to C<< 1 >>, the caller is considered time sensitive and most checks are skipped. This is used when a call must respond as quickly as possible. If set to C<< 1 >>, the caller is considered time sensitive and most checks are skipped. This is used when a call must respond as quickly as possible.
@ -1162,20 +1249,24 @@ sub connect
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3; my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "Database->connect()" }}); $anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "Database->connect()" }});
my $all = defined $parameter->{all} ? $parameter->{all} : 0;
my $check_if_configured = defined $parameter->{check_if_configured} ? $parameter->{check_if_configured} : 0; my $check_if_configured = defined $parameter->{check_if_configured} ? $parameter->{check_if_configured} : 0;
my $db_uuid = defined $parameter->{db_uuid} ? $parameter->{db_uuid} : ""; my $db_uuid = defined $parameter->{db_uuid} ? $parameter->{db_uuid} : "";
my $no_ping = defined $parameter->{no_ping} ? $parameter->{no_ping} : 0;
my $check_for_resync = defined $parameter->{check_for_resync} ? $parameter->{check_for_resync} : 0; my $check_for_resync = defined $parameter->{check_for_resync} ? $parameter->{check_for_resync} : 0;
my $no_ping = defined $parameter->{no_ping} ? $parameter->{no_ping} : 0;
my $retry = defined $parameter->{retry} ? $parameter->{retry} : 0;
my $sensitive = defined $parameter->{sensitive} ? $parameter->{sensitive} : 0; my $sensitive = defined $parameter->{sensitive} ? $parameter->{sensitive} : 0;
my $source = defined $parameter->{source} ? $parameter->{source} : "core"; my $source = defined $parameter->{source} ? $parameter->{source} : "core";
my $sql_file = defined $parameter->{sql_file} ? $parameter->{sql_file} : $anvil->data->{path}{sql}{'anvil.sql'}; my $sql_file = defined $parameter->{sql_file} ? $parameter->{sql_file} : $anvil->data->{path}{sql}{'anvil.sql'};
my $tables = defined $parameter->{tables} ? $parameter->{tables} : ""; my $tables = defined $parameter->{tables} ? $parameter->{tables} : "";
my $test_table = defined $parameter->{test_table} ? $parameter->{test_table} : $anvil->data->{sys}{database}{test_table}; my $test_table = defined $parameter->{test_table} ? $parameter->{test_table} : $anvil->data->{sys}{database}{test_table};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { $anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
all => $all,
check_if_configured => $check_if_configured, check_if_configured => $check_if_configured,
db_uuid => $db_uuid, db_uuid => $db_uuid,
no_ping => $no_ping,
check_for_resync => $check_for_resync, check_for_resync => $check_for_resync,
no_ping => $no_ping,
retry => $retry,
sensitive => $sensitive, sensitive => $sensitive,
source => $source, source => $source,
sql_file => $sql_file, sql_file => $sql_file,
@ -1228,6 +1319,14 @@ sub connect
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { check_for_resync => $check_for_resync }}); $anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { check_for_resync => $check_for_resync }});
} }
### NOTE: Experimental database configuration below
# If we're a striker, sort by UUID and the first one (doesn't matter which it actually is) becomes
# "primary". If this is a Striker and we connected to another Striker, shut down our database. Later,
# if no connections were found and this is a Striker, we'll start our database up (loading from our
# peer's last dump they sent us). If this is a node or DR host, we stop connecting after our first
# successful connections.
$anvil->data->{cache}{active_db} = "";
# Now setup or however-many connections # Now setup or however-many connections
my $seen_connections = []; my $seen_connections = [];
my $failed_connections = []; my $failed_connections = [];
@ -1369,8 +1468,9 @@ sub connect
}}); }});
if (not $test) if (not $test)
{ {
# Something went wrong... # Either the Striker hosting this is down, or it's not primary and stopped its
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, priority => "alert", key => "log_0064", variables => { # database.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 2, priority => "alert", key => "log_0064", variables => {
uuid => $uuid, uuid => $uuid,
host => $host, host => $host,
name => $name, name => $name,
@ -1602,12 +1702,159 @@ sub connect
target_version => $remote_schema_version, target_version => $remote_schema_version,
}}); }});
# Delete the information about this database. We'll try again on nexy # Delete the information about this database. We'll try again on next
# ->connect(). # ->connect().
delete $anvil->data->{database}{$uuid}; delete $anvil->data->{database}{$uuid};
$anvil->data->{sys}{database}{connections}--;
next;
}
}
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"sys::database::connections" => $anvil->data->{sys}{database}{connections},
}});
if (($anvil->data->{sys}{database}{connections}) && (not $all))
{
# Stop connecting here.
$anvil->data->{cache}{active_db} = $uuid;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"cache::active_db" => $anvil->data->{cache}{active_db},
}});
last;
}
}
# If we're not connecting to all databases, perform shutdown / backup / daemon management logic.
if (not $all)
{
my $local_host_type = $anvil->Get->host_type();
my $local_host_uuid = $anvil->Get->host_uuid();
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
local_host_type => $local_host_type,
local_host_uuid => $local_host_uuid,
}});
# Are we a Striker?
if ($local_host_type eq "striker")
{
# If we didn't connect to any database, it's possible/likely our peer is down and we need to
# start our local postgres database server.
if ((not $anvil->data->{sys}{database}{connections}) && (not $running))
{
# Tell the user we're going to try to load and start.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, priority => "alert", key => "log_0650"});
# Look for pgdumps. "Youngest" is the one with the highest mtime.
my $use_dump = "";
my $youngest_dump = 0;
my $directory = $anvil->data->{path}{directories}{pgsql};
my $db_name = $anvil->data->{sys}{database}{name};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { directory => $directory }});
local(*DIRECTORY);
opendir(DIRECTORY, $directory);
while(my $file = readdir(DIRECTORY))
{
next if $file eq ".";
next if $file eq "..";
my $db_dump_uuid = "";
my $full_path = $directory."/".$file;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
file => $file,
full_path => $full_path,
}});
if ($file =~ /${db_name}_db_dump\.(.*).sql/)
{
$db_dump_uuid = $1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { directory => $directory }});
# Is this one of our own dumps?
if ($db_dump_uuid eq $local_host_uuid)
{
# Ignore it.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0653", variables => { full_path => $full_path });
next;
}
# Is this a database we're configured to use?
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0651", variables => { full_path => $full_path });
if ((not exists $anvil->data->{database}{$db_dump_uuid}) or (not $anvil->data->{database}{$db_dump_uuid}{host}))
{
# Not a database we're peered with anymore, ignore it.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0652", variables => {
full_path => $full_path,
host_uuid => $db_dump_uuid,
});
next; next;
} }
} }
else
{
next;
}
# What's the mtime on this file?
$anvil->Storage->get_file_stats({debug => $debug, file => $full_path});
my $mtime = $anvil->data->{file_stat}{$file_path}{modified_time};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { directory => $directory }});
if ($mtime > $youngest_dump)
{
# This is the youngest, so far.
$youngest_dump = $mtime;
$use_dump = $full_path;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
youngest_dump => $youngest_dump,
full_path => $full_path,
}});
}
}
# Did I find a dump to load?
if ($use_dump)
{
# Yup! This will start the database, if needed.
my $file_size = $anvil->Convert->bytes_to_human_readable({'bytes' => $anvil->data->{file_stat}{$file_path}{size}});
my $file_size_bytes = $anvil->Convert->add_commas({number => $anvil->data->{file_stat}{$file_path}{size}});
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0656", variables => {
file => $file_path,
size => $file_size,
size_bytes => $file_size_bytes,
}});
my $problem = $anvil->Database->load_database({
debug => $debug,
backup => 1,
load_file => $full_path,
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { problem => $problem }});
### TODO: Loop through the directory and delete all dumps from other
### Strikers. This way we won't roll back in time if we restart
### and there's been no new dumps made.
}
# Check if the dameon is running
my $running = $anvil->System->check_daemon({daemon => "NetworkManager"});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { running => $running }});
if (not $running)
{
my $return_code = $anvil->System->start_daemon({daemon => $anvil->data->{sys}{daemon}{postgresql}});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { return_code => $return_code }});
if ($return_code eq "0")
{
# Started the daemon.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0059"});
# Recall this method.
if (not $retry)
{
$anvil->Database->connect({debug => $debug, retry => 1});
}
}
}
}
}
} }
my $total = tv_interval ($start_time, [gettimeofday]); my $total = tv_interval ($start_time, [gettimeofday]);
@ -13761,6 +14008,242 @@ WHERE
} }
=head2 load_database
This takes a path to an uncompressed SQL database dump file, and loads it into the C<< anvil >> database. During the duration of this operation, remote access to the database will be disabled via C<< iptables >> drop on port 5432!
If necessary, the database server will be started.
If the dump is successfully loaded, C<< 0 >> is returned. If there is a problem, C<< !!error!! >> is returned.
B<< Note >>: This method must be called by the root user.
B<< Note >>: This always and only works on the local database server's C<< anvil >> database.
Parameters;
=head3 backup (optional, default '1')
This controls whether the data in the existing database is saved to a file prior to the passed-in database file being loaded.
=head3 load_file (required)
This is the full path to the SQL file to load into the database.
=cut
sub load_database
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "Database->load_database()" }});
my $backup = $parameter->{backup} ? $parameter->{backup} : 1;
my $load_file = $parameter->{load_file} ? $parameter->{load_file} : 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
backup => $backup,
load_file => $load_file,
}});
# Only the root user can do this
if (($< != 0) && ($> != 0))
{
# Not root
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0350"});
return('!!error!!');
}
# Does the file exist?
if (not $load_file)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "log_0020", variables => { method => "Database->load_database()", parameter => "load_file" }});
}
elsif (not -e $load_file)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0103", variables => { file => $load_file }});
return('!!error!!');
}
my $start_time = time;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { start_time => $start_time }});
### TODO: Replace this with System->manage_firewall().
# Throw up the firewall. Have the open call ready in case we hit an error.
my $block_call = $anvil->data->{path}{exe}{iptables}." -I INPUT -p tcp --dport 5432 -j REJECT";
my $open_call = $anvil->data->{path}{exe}{iptables}." -D INPUT -p tcp --dport 5432 -j REJECT";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { block_call => $block_call }});
my ($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $block_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
# Start the database, if needed.
my $running = $anvil->System->check_daemon({debug => $debug, daemon => $anvil->data->{sys}{daemon}{postgresql}});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { running => $running }});
if (not $running)
{
# Start it up.
my $return_code = $anvil->System->start_daemon({daemon => $anvil->data->{sys}{daemon}{postgresql}});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { return_code => $return_code }});
if ($return_code eq "0")
{
# Started the daemon.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0059"});
}
else
{
# Failed to start
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "log_0094"});
# Drop the firewall block
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { open_call => $open_call }});
my ($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $open_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
return("!!error!!");
}
}
# Backup, if needed.
if ($backup)
{
# Backup the database.
my $problem = $anvil->Database->backup_database({debug => $debug});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { problem => $problem }});
if ($problem)
{
# Drop the firewall block
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { open_call => $open_call }});
my ($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $open_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
return("!!error!!");
}
}
# Drop the existing database.
my $drop_call = $anvil->data->{path}{exe}{su}." - postgres -c \"".$anvil->data->{path}{exe}{dropdb}." ".$anvil->data->{sys}{database}{name}."\"";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { drop_call => $drop_call }});
$output = "";
$return_code = "";
($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $drop_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
if ($return_code)
{
# This is a failure, but it could be that the database simply didn't exist (was already
# dumped). If that's the case, we'll keep going.
my $proceed = 0;
if ($output =~ /database ".*?" does not exist/gs)
{
# proceed.
$proceed = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { proceed => $proceed }});
}
if (not $proceed)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0353", variables => {
shell_call => $drop_call,
return_code => $return_code,
output => $output,
}});
# Drop the firewall block
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { open_call => $open_call }});
my ($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $open_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
return('!!error!!');
}
}
# Recreate the DB.
my $create_call = $anvil->data->{path}{exe}{su}." - postgres -c \"".$anvil->data->{path}{exe}{createdb}." --owner ".$anvil->data->{sys}{database}{user}." ".$anvil->data->{sys}{database}{name}."\"";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { create_call => $create_call }});
$output = "";
$return_code = "";
($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $create_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
if ($return_code)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0354", variables => {
shell_call => $create_call,
return_code => $return_code,
output => $output,
}});
# Drop the firewall block
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { open_call => $open_call }});
my ($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $open_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
return('!!error!!');
}
# Finally, load the database.
my $load_call = $anvil->data->{path}{exe}{su}." - postgres -c \"".$anvil->data->{path}{exe}{pgsql}." < ".$load_file."\"";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { load_call => $load_call }});
$output = "";
$return_code = "";
($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $load_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
if ($return_code)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0355", variables => {
shell_call => $load_call,
return_code => $return_code,
output => $output,
}});
# Drop the firewall block
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { open_call => $open_call }});
my ($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $open_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
return('!!error!!');
}
# Open the firewall back up
$output = "";
$return_code = "";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { open_call => $open_call }});
($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $open_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
# Done!
my $took_time = time - $start_time;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0655", variables => {
file => $load_file,
took => $took_time,
}});
return(0);
}
=head2 lock_file =head2 lock_file
This reads, sets or updates the database lock file timestamp. This reads, sets or updates the database lock file timestamp.

1
Anvil/Tools/Storage.pm
Unescape View File

@ -20,6 +20,7 @@ my $THIS_FILE = "Storage.pm";
# change_mode # change_mode
# change_owner # change_owner
# check_md5sums # check_md5sums
# compress
# copy_file # copy_file
# delete_file # delete_file
# find # find

43
notes
Unescape View File

@ -8,51 +8,14 @@ TODO:
============ ============
# Dump # Dump
su - postgres -c "pg_dump anvil > /tmp/anvil.out" && mv /tmp/anvil.out /root/ su - postgres -c "pg_dump anvil > /var/lib/pgsql/anvil.out"
su - postgres -c "pg_dump --schema-only anvil > /tmp/anvil.out" && mv /tmp/anvil.out /root/ su - postgres -c "pg_dump --schema-only anvil > /var/lib/pgsql/anvil_schema.out"
cp /root/anvil.out /; su - postgres -c "dropdb anvil" && su - postgres -c "createdb --owner admin anvil" && su - postgres -c "psql anvil < /anvil.out" su - postgres -c "dropdb anvil" && su - postgres -c "createdb --owner admin anvil" && su - postgres -c "psql anvil < /var/lib/pgsql/anvil.out"
su postgres -c "psql anvil" su postgres -c "psql anvil"
============ ============
# ScanCore post-scan logic;
Sole node:
1. Evaluate critical shutdown only, if hosting VMs.
2. If not hosting VMs, load-shed if over-heat / power loss for more than 120 seconds
Action options;
1. Do nothing
2. Pull servers
3. Shut down (once servers are gone)
4. Shut down (gracefully stop servers)
* Peer not available
- Thermal is critical, gracefully shut down.
- Power is strongest UPS below ten minutes and time on batteries is over 2 minutes, graceful shut down
* Peer available
- If one node is healthier than the other;
- If we're sicker, do nothing until we have no servers
- If we're healthier, after two minutes, pull
- If health is equal;
- Both nodes have servers;
- Decide who can be evacuated fastest, in case load shed needed.
- Both nodes on batteries or in warning temp for more than 2 minutes;
- If we're the designated survivor, pull servers.
- If we're the sacrifice, wait for the servers to be taken off of us, then shut down.
- Peer has servers, we don't
- If thermal warning or both/all UPSes on batter for two minutes+, shut down
- We have servers, peer doesn't.
- Keep running
1.1 - Our peer may pull from us.
2. - Not Hosting Servers
2.1 -
Jenkins; Jenkins;

32
share/words.xml
Unescape View File

@ -477,6 +477,29 @@ The output, if any, was
<key name="error_0347">- The problematic new config has been saved as: [#!variable!file!#].</key> <key name="error_0347">- The problematic new config has been saved as: [#!variable!file!#].</key>
<key name="error_0348">- The old config has been restored. Exiting.</key> <key name="error_0348">- The old config has been restored. Exiting.</key>
<key name="error_0349">- The logical volume: [#!variable!lv_path!#] creation failed. Unable to proceed.</key> <key name="error_0349">- The logical volume: [#!variable!lv_path!#] creation failed. Unable to proceed.</key>
<key name="error_0350">Only the root user can load a database file and start the database.</key>
<key name="error_0351">[ Error ] - The 'pg_dump' call to backup the database failed. Expected a return code of '0', but got: [#!variable!return_code!#].
Full command called: [#!variable!shell_call!#]
The output, if any, was
====
#!variable!output!#
====
</key>
<key name="error_0352">Only the root user can backup a database.</key>
<key name="error_0353">[ Error ] - The 'dropdb' call to drop the database failed. Expected a return code of '0', but got: [#!variable!return_code!#].
Full command called: [#!variable!shell_call!#]
The output, if any, was
====
#!variable!output!#
====
</key>
<key name="error_0354">[ Error ] - The 'createdb' call to create the database failed. Expected a return code of '0', but got: [#!variable!return_code!#].
Full command called: [#!variable!shell_call!#]
The output, if any, was;
====
#!variable!output!#
====
</key>
<!-- Files templates --> <!-- Files templates -->
<!-- NOTE: Translating these files requires an understanding of which lines are translatable --> <!-- NOTE: Translating these files requires an understanding of which lines are translatable -->
@ -1320,7 +1343,7 @@ Connecting to Database with configuration ID: [#!variable!uuid!#]
<key name="log_0061"><![CDATA[[ Error ] - The method Get->users_home() was asked to find the home directory for the user: [#!variable!user!#], but was unable to do so.]]></key> <key name="log_0061"><![CDATA[[ Error ] - The method Get->users_home() was asked to find the home directory for the user: [#!variable!user!#], but was unable to do so.]]></key>
<key name="log_0062">SSH session opened without a password to: [#!variable!target!#].</key> <key name="log_0062">SSH session opened without a password to: [#!variable!target!#].</key>
<key name="log_0063"><![CDATA[The database: [#!variable!host!# -> #!variable!name!#] with the UUID: [#!variable!uuid!#] did not respond to pings and 'database::#!variable!uuid!#::ping' is not set to '0' in '#!data!path::configs::anvil.conf!#', skipping it.]]></key> <key name="log_0063"><![CDATA[The database: [#!variable!host!# -> #!variable!name!#] with the UUID: [#!variable!uuid!#] did not respond to pings and 'database::#!variable!uuid!#::ping' is not set to '0' in '#!data!path::configs::anvil.conf!#', skipping it.]]></key>
<key name="log_0064">[ Warning ] - The database: [#!variable!name!#] on host: [#!variable!host!#] with UUID: [#!variable!uuid!#] can not be used, skipping it.</key> <key name="log_0064">[ Note ] - The database: [#!variable!name!#] on host: [#!variable!host!#] with UUID: [#!variable!uuid!#] can not be used, skipping it.</key>
<key name="log_0065"> <key name="log_0065">
The database connection error was: The database connection error was:
---------- ----------
@ -1992,6 +2015,13 @@ The file: [#!variable!file!#] needs to be updated. The difference is:
<key name="log_0647">[ Note ] - The network interface: [#!variable!name!#] with 'network_interface_uuid': [#!variable!uuid!#] is a duplicate, removing it from the database(s).</key> <key name="log_0647">[ Note ] - The network interface: [#!variable!name!#] with 'network_interface_uuid': [#!variable!uuid!#] is a duplicate, removing it from the database(s).</key>
<key name="log_0648">[ Note ] - Managing /etc/hosts has been disabled.</key> <key name="log_0648">[ Note ] - Managing /etc/hosts has been disabled.</key>
<key name="log_0649">[ Note ] - The Anvil!: [#!variable!anvil_name!#]'s storage group: [#!variable!storage_group!#] didn't have an entry for the host: [#!variable!host_name!#]. The volume group: [#!variable!vg_internal_uuid!#] is a close fit and not in another storage group, so adding it to this storage group now.</key> <key name="log_0649">[ Note ] - The Anvil!: [#!variable!anvil_name!#]'s storage group: [#!variable!storage_group!#] didn't have an entry for the host: [#!variable!host_name!#]. The volume group: [#!variable!vg_internal_uuid!#] is a close fit and not in another storage group, so adding it to this storage group now.</key>
<key name="log_0650">[ Note ] - We're a Striker and we did not connect to a peer's database. Will check now if we can load a recent backup, then start postgres locally (with or without a load).</key>
<key name="log_0651">Evaluating the dump file: [#!variable!full_path!#].</key>
<key name="log_0652">The database host UUID: [#!variable!host_uuid!#] is not configured here, ignoring: [#!variable!full_path!#].</key>
<key name="log_0653">We created the database dump file: [#!variable!full_path!#], ignoring it.</key>
<key name="log_0654">The database was dumped to: [#!variable!file!#] in: [#!variable!took!#] second(s). The size of the dump file is: [#!variable!size!#] (#!variable!size_bytes) bytes).</key>
<key name="log_0655">The database was loaded successfull from the file: [#!variable!file!#] in: [#!variable!took!#] second(s)!</key>
<key name="log_0656">No databases were available, so we will become primary after loading: [#!variable!file!#], which is: [#!variable!size!#] (#!variable!size_bytes!# bytes). Please be patient, this could take a moment.</key>
<!-- Messages for users (less technical than log entries), though sometimes used for logs, too. --> <!-- Messages for users (less technical than log entries), though sometimes used for logs, too. -->
<key name="message_0001">The host name: [#!variable!target!#] does not resolve to an IP address.</key> <key name="message_0001">The host name: [#!variable!target!#] does not resolve to an IP address.</key>

27
tools/anvil-daemon
Unescape View File

@ -1,4 +1,4 @@
#!/usr/bin/perl # #!/usr/bin/perl
# #
# This is the master daemon that manages all periodically run processes on Striker dashboards, Anvil! cluster # This is the master daemon that manages all periodically run processes on Striker dashboards, Anvil! cluster
# nodes and DR hosts. # nodes and DR hosts.
@ -175,6 +175,7 @@ $anvil->data->{timing}{minute_checks} = 60;
$anvil->data->{timing}{daily_checks} = 86400; $anvil->data->{timing}{daily_checks} = 86400;
$anvil->data->{timing}{repo_update_interval} = 86400; $anvil->data->{timing}{repo_update_interval} = 86400;
$anvil->data->{timing}{next_minute_check} = $now_time - 1; $anvil->data->{timing}{next_minute_check} = $now_time - 1;
$anvil->data->{timing}{next_ten_minute_check} = $now_time - 1;
$anvil->data->{timing}{next_daily_check} = ($now_time + $delay) - 1; $anvil->data->{timing}{next_daily_check} = ($now_time + $delay) - 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { $anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"s1:timing::minute_checks" => $anvil->data->{timing}{minute_checks}, "s1:timing::minute_checks" => $anvil->data->{timing}{minute_checks},
@ -183,6 +184,7 @@ $anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list
"s4:now_time" => $now_time, "s4:now_time" => $now_time,
"s5:delay" => $delay, "s5:delay" => $delay,
"s6:timing::next_minute_check" => $anvil->data->{timing}{next_minute_check}, "s6:timing::next_minute_check" => $anvil->data->{timing}{next_minute_check},
"s6:timing::next_ten_minute_check" => $anvil->data->{timing}{next_ten_minute_check},
"s7:timing::next_daily_check" => $anvil->data->{timing}{next_daily_check}, "s7:timing::next_daily_check" => $anvil->data->{timing}{next_daily_check},
}}); }});
@ -420,8 +422,9 @@ sub handle_periodic_tasks
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => { $anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => {
"s1:now_time" => $now_time, "s1:now_time" => $now_time,
"s2:timing::next_minute_check" => $anvil->data->{timing}{next_minute_check}, "s2:timing::next_minute_check" => $anvil->data->{timing}{next_minute_check},
"s3:timing::next_daily_check" => $anvil->data->{timing}{next_daily_check}, "s3:timing::next_ten_minute_check" => $anvil->data->{timing}{next_ten_minute_check},
"s4:type" => $type, "s4:timing::next_daily_check" => $anvil->data->{timing}{next_daily_check},
"s5:type" => $type,
}}); }});
# Time to run once per minute tasks. # Time to run once per minute tasks.
@ -503,6 +506,24 @@ sub handle_periodic_tasks
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => { problem => $problem }}); $anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => { problem => $problem }});
} }
# Now check to see if it's time to run less frequent tasks.
if ($now_time >= $anvil->data->{timing}{next_ten_minute_check})
{
if ($type eq "striker")
{
# If we're the active database, dump out database out and rsync it to our peers.
my $peers = keys $anvil->data->{database};
my $host_uuid = $anvil->Get->host_uuid;
my $connections = $anvil->data->{sys}{database}{connections};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
peers => $peers,
host_uuid => $host_uuid,
connections => $connections,
}});
if ($anvil->data->{sys}{database}{local_uuid} eq $host_uuid)
}
}
# Now check to see if it's time to run daily tasks. # Now check to see if it's time to run daily tasks.
if ($now_time >= $anvil->data->{timing}{next_daily_check}) if ($now_time >= $anvil->data->{timing}{next_daily_check})
{ {

Write Preview
Loading…
Cancel
Save