<keyname="error_0115">This row's UUID column: [#!variable!uuid_column!#] wasn't the second column returned in query: [#!variable!query!#]</key>
<keyname="error_0115">This row's UUID column: [#!variable!uuid_column!#] wasn't the second column returned in query: [#!variable!query!#]</key>
<keyname="error_0116">This is a CentOS machine, and tried to move the directory: [#!variable!source!#] to: [#!variable!target!#], but that renane failed.</key>
<keyname="error_0116">This is a CentOS machine, and tried to move the directory: [#!variable!source!#] to: [#!variable!target!#], but that renane failed.</key>
<keyname="error_0117">The domain name: [#!variable!name!#] does not appear to be valid.</key>
<keyname="error_0117">The domain name: [#!variable!name!#] does not appear to be valid.</key>
<keyname="error_0118">The IP address: [#!variable!ip!#] does not appear to be valid.</key>
<keyname="error_0119">The IP given for the network: [#!variable!name!#] does not appear to be the network base IP. Did you mean: [#!variable!ip!#]?</key>
<keyname="error_0120">The IP given for the network: [#!variable!network!#] with the subnet mask: [#!variable!subnet!#] does not appear to be a valid network range.</key>
<keyname="error_0121">The gateway: [#!variable!gateway!#] does not apear to be in the network: [#!variable!network!#]/[#!variable!subnet!#].</key>
<!-- Table headers -->
<!-- Table headers -->
<keyname="header_0001">Current Network Interfaces and States</key>
<keyname="header_0001">Current Network Interfaces and States</key>
@ -226,7 +230,7 @@ The error was:
<keyname="job_0017">Update the 'Install Target' source files and refresh RPM repository.</key>
<keyname="job_0017">Update the 'Install Target' source files and refresh RPM repository.</key>
<keyname="job_0018">Download a file</key>
<keyname="job_0018">Download a file</key>
<keyname="job_0019">The referenced file will be downloaded by the target host.</key>
<keyname="job_0019">The referenced file will be downloaded by the target host.</key>
<keyname="job_0020">Initialize a new Anvil! Node</key>
<keyname="job_0020">Initialize a new #!string!brand_0002!# Node</key>
<keyname="job_0021">Initialize a new DR Host</key>
<keyname="job_0021">Initialize a new DR Host</key>
<keyname="job_0022">The target will be setup to talk to this and our peer dashboards. When initialization is complete, you will be able to map the target's network.</key>
<keyname="job_0022">The target will be setup to talk to this and our peer dashboards. When initialization is complete, you will be able to map the target's network.</key>
<keyname="job_0023">Connecting to the target: [#!variable!target!#]...</key>
<keyname="job_0023">Connecting to the target: [#!variable!target!#]...</key>
@ -277,7 +281,7 @@ Failure! The return code: [#!variable!return_code!#] was received ('0' was expec
<keyname="job_0064">OUI Database.</key>
<keyname="job_0064">OUI Database.</key>
<keyname="job_0065">Refresh the 'OUI' database used to cross reference MAC addresses to the companies that own them.</key>
<keyname="job_0065">Refresh the 'OUI' database used to cross reference MAC addresses to the companies that own them.</key>
<keyname="job_0066">Network Scan.</key>
<keyname="job_0066">Network Scan.</key>
<keyname="job_0067">This job does a simple ping scan of the networks connected to this host. Any detected hosts have their MAC / IP addresses recorded. This is designed to help determine IP addresses assigned to servers hosted on the Anvil! system.</key>
<keyname="job_0067">This job does a simple ping scan of the networks connected to this host. Any detected hosts have their MAC / IP addresses recorded. This is designed to help determine IP addresses assigned to servers hosted on the #!string!brand_0002!# system.</key>
<keyname="job_0068">Adding the database connection information for the dashboard: [#!variable!host_name!#] to the target's anvil.conf file.</key>
<keyname="job_0068">Adding the database connection information for the dashboard: [#!variable!host_name!#] to the target's anvil.conf file.</key>
<keyname="job_0069">Unable to find a matching network, skipping this database.</key>
<keyname="job_0069">Unable to find a matching network, skipping this database.</key>
<keyname="job_0070">Something went wrong adding this database. Please see: [#!data!path::log::main!#] for details.</key>
<keyname="job_0070">Something went wrong adding this database. Please see: [#!data!path::log::main!#] for details.</key>
@ -415,18 +419,18 @@ The database connection error was:
- Name: ......... [#!variable!name!#]
- Name: ......... [#!variable!name!#]
- Timestamp: .... [#!variable!modified_date!#]
- Timestamp: .... [#!variable!modified_date!#]
</key>
</key>
<keyname="log_0099">[ Error ] - There is no Anvil! database user set for the local machine. Please check: [#!data!path::config::anvil.conf!#]'s DB entry: [#!variable!uuid!#].</key>
<keyname="log_0099">[ Error ] - There is no #!string!brand_0002!# database user set for the local machine. Please check: [#!data!path::config::anvil.conf!#]'s DB entry: [#!variable!uuid!#].</key>
<keyname="log_0100">Database user: [#!variable!user!#] password has been set/updated.</key>
<keyname="log_0100">Database user: [#!variable!user!#] password has been set/updated.</key>
<keyname="log_0101">Failed to connect to: [#!variable!target!#:#!variable!port!#], sleeping for a second and then trying again.</key>
<keyname="log_0101">Failed to connect to: [#!variable!target!#:#!variable!port!#], sleeping for a second and then trying again.</key>
<keyname="log_0102">I am not recording the alert with message_key: [#!variable!message_key!#] to the database because its log level was lower than any recipients.</key>
<keyname="log_0102">I am not recording the alert with message_key: [#!variable!message_key!#] to the database because its log level was lower than any recipients.</key>
<keyname="log_0103">The local machine's UUID was not read properly. It should be stored in: [#!data!sys::host_uuid!#] and contain hexadecimal characters in the format: '012345-6789-abcd-ef01-23456789abcd' and usually matches the output of 'dmidecode --string system-uuid'. If this file exists and if there is a string in the file, please verify that it is structured correctly.</key>
<keyname="log_0103">The local machine's UUID was not read properly. It should be stored in: [#!data!sys::host_uuid!#] and contain hexadecimal characters in the format: '012345-6789-abcd-ef01-23456789abcd' and usually matches the output of 'dmidecode --string system-uuid'. If this file exists and if there is a string in the file, please verify that it is structured correctly.</key>
<keyname="log_0104">The database with UUID: [#!variable!uuid!#] for: [#!variable!file!#] is behind.</key>
<keyname="log_0104">The database with UUID: [#!variable!uuid!#] for: [#!variable!file!#] is behind.</key>
<keyname="log_0106">The table: [#!variable!table!#] (and possibly others) in the database on: [#!variable!host!#] (UUID: [#!variable!uuid!#]) is behind by: [#!variable!seconds!#] seconds. A database resync will be requested.</key>
<keyname="log_0106">The table: [#!variable!table!#] (and possibly others) in the database on: [#!variable!host!#] (UUID: [#!variable!uuid!#]) is behind by: [#!variable!seconds!#] seconds. A database resync will be requested.</key>
<keyname="log_0107">[ Warning ] - Failed to delete the temporary postgres password.</key>
<keyname="log_0107">[ Warning ] - Failed to delete the temporary postgres password.</key>
<keyname="log_0108"><![CDATA[[ Error ] - The method Database->insert_or_update_states() was called but the 'state_host_uuid' parameter was not passed or it is empty. Normally this is set to 'sys::data_uuid'.]]></key>
<keyname="log_0108"><![CDATA[[ Error ] - The method Database->insert_or_update_states() was called but the 'state_host_uuid' parameter was not passed or it is empty. Normally this is set to 'sys::data_uuid'.]]></key>
<keyname="log_0109">[ Error ] - Failed to create the Anvil! database: [#!variable!database!#]</key>
<keyname="log_0109">[ Error ] - Failed to create the #!string!brand_0002!# database: [#!variable!database!#]</key>
<keyname="log_0111">[ Warning ] - Failed to reload the Postgres server. Please check the system logs for details. The updated configuration is probably not active yet.</key>
<keyname="log_0111">[ Warning ] - Failed to reload the Postgres server. Please check the system logs for details. The updated configuration is probably not active yet.</key>
<keyname="log_0112">Reloaded the PostgreSQL database server.</key>
<keyname="log_0112">Reloaded the PostgreSQL database server.</key>
<keyname="log_0113"><![CDATA[[ Note ] - The 'Database->configure_pgsql() method was called but the parent program is not running with root priviledges. Returning without doing anything.]]></key>
<keyname="log_0113"><![CDATA[[ Note ] - The 'Database->configure_pgsql() method was called but the parent program is not running with root priviledges. Returning without doing anything.]]></key>
@ -461,7 +465,7 @@ The database connection error was:
<keyname="log_0142"><![CDATA[[ Error ] - The system call: [#!variable!shell_call!#] will fail because the program: [#!variable!program!#] isn't executable.]]></key>
<keyname="log_0142"><![CDATA[[ Error ] - The system call: [#!variable!shell_call!#] will fail because the program: [#!variable!program!#] isn't executable.]]></key>
<keyname="log_0143">Failed to find a local ID, no databases are stored on this machine.</key>
<keyname="log_0143">Failed to find a local ID, no databases are stored on this machine.</key>
<keyname="log_0144">PostgreSQL server is not installed, unable to proceed.</key>
<keyname="log_0144">PostgreSQL server is not installed, unable to proceed.</key>
<keyname="log_0145"><![CDATA[[ Warning ] - Unable to use the database on the host: [#!variable!host!#]. The local Anvil! version is: [#!variable!local_version!#], and the target host's is: [#!variable!target_version!#]. If you are upgrading, we will resync and use it once the host and our version is again the same.]]></key>
<keyname="log_0145"><![CDATA[[ Warning ] - Unable to use the database on the host: [#!variable!host!#]. The local #!string!brand_0002!# version is: [#!variable!local_version!#], and the target host's is: [#!variable!target_version!#]. If you are upgrading, we will resync and use it once the host and our version is again the same.]]></key>
<keyname="log_0146">A job to configure the network was found, but it has already been picked up by: [#!variable!pid!#].</key>
<keyname="log_0146">A job to configure the network was found, but it has already been picked up by: [#!variable!pid!#].</key>
<keyname="log_0147">A job to configure the network was found, and it was picked up by: [#!variable!pid!#], but that process is not running and it appears to only be: [#!variable!percent!# %] complete. Taking the job.</key>
<keyname="log_0147">A job to configure the network was found, and it was picked up by: [#!variable!pid!#], but that process is not running and it appears to only be: [#!variable!percent!# %] complete. Taking the job.</key>
<keyname="log_0148">The network: [#!variable!network!#] has something set for the IP [#!variable!ip!#], but it appears to be invalid. Ignoring this network.</key>
<keyname="log_0148">The network: [#!variable!network!#] has something set for the IP [#!variable!ip!#], but it appears to be invalid. Ignoring this network.</key>
<keyname="log_0398">The server has the ISO: [#!variable!file!#] mounted in its optical drive, but that file doesn't exist on this system.</key>
<keyname="log_0398">The server has the ISO: [#!variable!file!#] mounted in its optical drive, but that file doesn't exist on this system.</key>
<keyname="log_0399">The server has the ISO: [#!variable!file!#] mounted in its optical drive, which we have, but we can't read it. Check permissions and for SELinux denials.</key>
<keyname="log_0399">The server has the ISO: [#!variable!file!#] mounted in its optical drive, which we have, but we can't read it. Check permissions and for SELinux denials.</key>
<keyname="log_0400">The server has the ISO: [#!variable!file!#] mounted in its optical drive, which we have.</key>
<keyname="log_0400">The server has the ISO: [#!variable!file!#] mounted in its optical drive, which we have.</key>
<keyname="log_0401">The server wants to use the emulator: [#!variable!emulator!#] which doesn't exist on this node. Was this server migrated from a different generation Anvil! system? Please update '<emulator>...</emulator>' in the server's definition file: [#!variable!definition_file!#].</key>
<keyname="log_0401">The server wants to use the emulator: [#!variable!emulator!#] which doesn't exist on this node. Was this server migrated from a different generation #!string!brand_0002!# system? Please update '<emulator>...</emulator>' in the server's definition file: [#!variable!definition_file!#].</key>
<keyname="log_0402">The server wants to use the emulator: [#!variable!emulator!#] which exists, but we can't run. Please check permissions and for SELinux denials.</key>
<keyname="log_0402">The server wants to use the emulator: [#!variable!emulator!#] which exists, but we can't run. Please check permissions and for SELinux denials.</key>
<keyname="log_0403">The configured server name: [#!variable!server!#] does not match the name of the server in the definition file: [#!variable!name!#]!</key>
<keyname="log_0403">The configured server name: [#!variable!server!#] does not match the name of the server in the definition file: [#!variable!name!#]!</key>
<keyname="log_0404">The configured server name: [#!variable!name!#] needs: [#!variable!ram!# (#!variable!ram_bytes!# bytes)] of RAM, but only: #!variable!available_ram!# (#!variable!available_ram_bytes!# bytes)] are available!</key>
<keyname="log_0404">The configured server name: [#!variable!name!#] needs: [#!variable!ram!# (#!variable!ram_bytes!# bytes)] of RAM, but only: #!variable!available_ram!# (#!variable!available_ram_bytes!# bytes)] are available!</key>
@ -913,10 +917,10 @@ The '-y' option prevents a confirmation prompt.
<keyname="message_0061">Aborting.</key>
<keyname="message_0061">Aborting.</key>
<keyname="message_0062">Powering off the local system now.</key>
<keyname="message_0062">Powering off the local system now.</key>
<keyname="message_0063">Rebooting the local system now.</key>
<keyname="message_0063">Rebooting the local system now.</key>
<keyname="message_0064">The Anvil! has restarted at: [#!variable!date_and_time!#] after powering back on.</key>
<keyname="message_0064">The #!string!brand_0006!# has restarted at: [#!variable!date_and_time!#] after powering back on.</key>
<keyname="message_0065">You will now be logged out and this machine will now be rebooted so that the new configuration can take effect.</key>
<keyname="message_0065">You will now be logged out and this machine will now be rebooted so that the new configuration can take effect.</key>
<keyname="message_0066">Starting the job to add or update an Anvil! database peer.</key>
<keyname="message_0066">Starting the job to add or update an #!string!brand_0006!# database peer.</key>
<keyname="message_0067">Starting the job to remove an Anvil! database peer.</key>
<keyname="message_0067">Starting the job to remove an #!string!brand_0006!# database peer.</key>
<!-- The strings below are used in the 'default' PXE menu. Entries used as option labels use '^' to indicate the hotkey, and must be unique in a given menu. -->
<!-- The strings below are used in the 'default' PXE menu. Entries used as option labels use '^' to indicate the hotkey, and must be unique in a given menu. -->
<keyname="message_0102">Checking that the "Install Target" function is configured and updated.</key>
<keyname="message_0102">Checking that the "Install Target" function is configured and updated.</key>
<!-- The strings below are printed in bash, so be mindful of escaping characters. The strings are wrapped in double-quotes ("), so escape them with a back-slash (\") -->
<!-- The strings below are printed in bash, so be mindful of escaping characters. The strings are wrapped in double-quotes ("), so escape them with a back-slash (\") -->
<keyname="message_0103">Finding install drive for a Striker dashboard.</key>
<keyname="message_0103">Finding install drive for a Striker dashboard.</key>
<keyname="message_0104">Finding install drive for an Anvil! node.</key>
<keyname="message_0104">Finding install drive for an #!string!brand_0006!# node.</key>
<keyname="message_0105">Finding install drive for a DR (disaster recovery) host.</key>
<keyname="message_0105">Finding install drive for a DR (disaster recovery) host.</key>
<keyname="message_0106">
<keyname="message_0106">
[ Error ] - Target type not specified. Be sure that '\$type' is set to
[ Error ] - Target type not specified. Be sure that '\$type' is set to
<!-- Above here are strings used in the kickstart scripts. Be sure to test kickstart installation after changing / translation between 'message_0103' and 'message_0114'. -->
<!-- Above here are strings used in the kickstart scripts. Be sure to test kickstart installation after changing / translation between 'message_0103' and 'message_0114'. -->
<keyname="message_0118">Regenerating the source repository metadata.</key>
<keyname="message_0118">Regenerating the source repository metadata.</key>
<keyname="message_0119">[ Error ] - The comps.xml file: [#!variable!comps_xml!#] was not found. This provides package group information required for Install Target guests. Is the 'anvil-striker-extra' package installed?</key>
<keyname="message_0119">[ Error ] - The comps.xml file: [#!variable!comps_xml!#] was not found. This provides package group information required for Install Target guests. Is the 'anvil-striker-extra' package installed?</key>
@ -1044,7 +1048,7 @@ About to try to download aproximately: [#!variable!packages!#] packages needed t
<keyname="message_0128">The attempt to enable the 'Install Target' function failed! Please check the logs for details.</key>
<keyname="message_0128">The attempt to enable the 'Install Target' function failed! Please check the logs for details.</key>
<keyname="message_0129">[ Error ] - The comps.xml file: [#!variable!comps_xml!#] was found, but something failed when we tried to copy it to: [#!variable!target_comps!#].</key>
<keyname="message_0129">[ Error ] - The comps.xml file: [#!variable!comps_xml!#] was found, but something failed when we tried to copy it to: [#!variable!target_comps!#].</key>
<keyname="message_0131">Back-Channel Network ##!variable!number!# - Used for all inter-machine communication in the Anvil!, as well as communication for foundation pack devices. Should be VLAN-isolated from the IFN and, thus, trusted.</key>
<keyname="message_0131">Back-Channel Network ##!variable!number!# - Used for all inter-machine communication in the #!string!brand_0006!#, as well as communication for foundation pack devices. Should be VLAN-isolated from the IFN and, thus, trusted.</key>
<keyname="message_0132">Storage Network ##!variable!number!# - Used for DRBD communication between nodes and DR hosts. Should be VLAN-isolated from the IFN and, thus, trusted.</key>
<keyname="message_0132">Storage Network ##!variable!number!# - Used for DRBD communication between nodes and DR hosts. Should be VLAN-isolated from the IFN and, thus, trusted.</key>
<keyname="message_0133">Internet-Facing Network ##!variable!number!# - Used for all client/user facing traffic. Likely connected to a semi-trusted network only.</key>
<keyname="message_0133">Internet-Facing Network ##!variable!number!# - Used for all client/user facing traffic. Likely connected to a semi-trusted network only.</key>
<keyname="message_0134">Updating / configuring the firewall.</key>
<keyname="message_0134">Updating / configuring the firewall.</key>
@ -1076,6 +1080,12 @@ About to try to download aproximately: [#!variable!packages!#] packages needed t
<keyname="message_0163">The network is the lowest IP in the subnet range. This is not any given IP address. For example, '10.255.0.0' for the mask '255.255.0.0', '192.168.1.0' for the mask '255.255.255.0', etc.</key>
<keyname="message_0164">The subnet mask indicates the size of the network. The BCN and SN must be '255.255.0.0 (/16)'. Set the mask to match you IFN network(s).</key>
<keyname="message_0165">If the network has a gateway (permanent or periodic), enter it here.</key>
<keyname="message_0166">An isolated, VLAN'ed network used for all inter-machine communication in the #!string!brand_0006!#, as well as communication for foundation pack devices.</key>
<keyname="message_0167">An isolated, VLAN'ed network Used for storage replication traffic only.</key>
<keyname="message_0168">Connecting to the main site intranet. This is the network (or networks) that guest virtual servers will use to connect to all devices outside the #!string!brand_0006!# system.</key>
<!-- Success messages shown to the user -->
<!-- Success messages shown to the user -->
<keyname="ok_0001">Saved the mail server information successfully!</key>
<keyname="ok_0001">Saved the mail server information successfully!</key>
@ -1120,7 +1130,7 @@ About to try to download aproximately: [#!variable!packages!#] packages needed t
<keyname="striker_0022">Internet-Facing Network link #!variable!number!#</key>
<keyname="striker_0022">Internet-Facing Network link #!variable!number!#</key>
<keyname="striker_0023">This is where you configure the network to enable access this Internet-Facing Network.</key>
<keyname="striker_0023">This is where you configure the network to enable access this Internet-Facing Network.</key>
<keyname="striker_0024">IP Address</key>
<keyname="striker_0024">IP Address</key>
<keyname="striker_0025">Subnet</key>
<keyname="striker_0025">Subnet Mask</key>
<keyname="striker_0026">Gateway</key>
<keyname="striker_0026">Gateway</key>
<keyname="striker_0027">DNS Server</key>
<keyname="striker_0027">DNS Server</key>
<keyname="striker_0028">Network Interface</key>
<keyname="striker_0028">Network Interface</key>
@ -1152,11 +1162,11 @@ About to try to download aproximately: [#!variable!packages!#] packages needed t
<keyname="striker_0055">When you sync with a peer, this machine's data will be copied to and recorded on the peer's database. Data gathered by ScanCore will also be kept in sync on both dashboards, and any general purpose data collected by other dashboards while this one is offline will be copied back when this machine comes online. Should this machine ever be rebuilt, data recorded from before the rebuild will be automatically restored as well.</key>
<keyname="striker_0055">When you sync with a peer, this machine's data will be copied to and recorded on the peer's database. Data gathered by ScanCore will also be kept in sync on both dashboards, and any general purpose data collected by other dashboards while this one is offline will be copied back when this machine comes online. Should this machine ever be rebuilt, data recorded from before the rebuild will be automatically restored as well.</key>
<keyname="striker_0056">Update System</key>
<keyname="striker_0056">Update System</key>
<keyname="striker_0057">This will update this system using any available software repositories. You can also use this to create or load update packs to allow for the update of offline or air-gapped Anvil! systems.</key>
<keyname="striker_0057">This will update this system using any available software repositories. You can also use this to create or load update packs to allow for the update of offline or air-gapped #!string!brand_0006!# systems.</key>
<keyname="striker_0058">Configure Striker</key>
<keyname="striker_0058">Configure Striker</key>
<keyname="striker_0059">Update the network configuration for this Striker.</key>
<keyname="striker_0059">Update the network configuration for this Striker.</key>
<keyname="striker_0060">Welcome!</key>
<keyname="striker_0060">Welcome!</key>
<keyname="striker_0061">Create or manage Anvil! systems</key>
<keyname="striker_0061">Create or manage #!string!brand_0006!# systems</key>
<keyname="striker_0062">Manage this Striker system and sync with others</key>
<keyname="striker_0062">Manage this Striker system and sync with others</key>
<keyname="striker_0063">Log out</key>
<keyname="striker_0063">Log out</key>
<keyname="striker_0064">Help and support</key>
<keyname="striker_0064">Help and support</key>
@ -1168,7 +1178,7 @@ About to try to download aproximately: [#!variable!packages!#] packages needed t
<keyname="striker_0070">Add</key>
<keyname="striker_0070">Add</key>
<keyname="striker_0071">Ping</key>
<keyname="striker_0071">Ping</key>
<keyname="striker_0072">Bi-directional</key>
<keyname="striker_0072">Bi-directional</key>
<keyname="striker_0073">When checked, the Anvil! will ping the peer before trying to connect to the database. This speeds up skipping a database that is offline, but won't help if the databsae is behind a router. When unchecked, connections will be a touch faster when the database is available.</key>
<keyname="striker_0073">When checked, the #!string!brand_0006!# will ping the peer before trying to connect to the database. This speeds up skipping a database that is offline, but won't help if the databsae is behind a router. When unchecked, connections will be a touch faster when the database is available.</key>
<keyname="striker_0074">When checked, the peer will be configured to add the local database as a peer at the same time that we add it to this system.</key>
<keyname="striker_0074">When checked, the peer will be configured to add the local database as a peer at the same time that we add it to this system.</key>
<keyname="striker_0075">Access</key>
<keyname="striker_0075">Access</key>
<keyname="striker_0076"><![CDATA[This tells Striker how to connect to the peer. The default username is '<span class="fixed_width">admin</span>', and the default port is '<span class="fixed_width">5432</span>'. If the peer uses these, then you only need to specify the IP address or host name of the peer. If the user name is not '<span class="fixed_width">admin</span>', then you need to use the format '<span class="fixed_width">user@host</span>. If the TCP port is not '<span class="fixed_width">5432</span>', then you need to use '<span class="fixed_width">host:port</span>. If both user and port are different, use the format '<span class="fixed_width">user@host:port</span>'.]]></key>
<keyname="striker_0076"><![CDATA[This tells Striker how to connect to the peer. The default username is '<span class="fixed_width">admin</span>', and the default port is '<span class="fixed_width">5432</span>'. If the peer uses these, then you only need to specify the IP address or host name of the peer. If the user name is not '<span class="fixed_width">admin</span>', then you need to use the format '<span class="fixed_width">user@host</span>. If the TCP port is not '<span class="fixed_width">5432</span>', then you need to use '<span class="fixed_width">host:port</span>. If both user and port are different, use the format '<span class="fixed_width">user@host:port</span>'.]]></key>
@ -1205,16 +1215,16 @@ About to try to download aproximately: [#!variable!packages!#] packages needed t
<keyname="striker_0109"><![CDATA[<span class="disabled">'Install Target' Not Available</span>]]></key>
<keyname="striker_0109"><![CDATA[<span class="disabled">'Install Target' Not Available</span>]]></key>
<keyname="striker_0110">The 'Install Target' feature is used to do base (stage 1) installs on new or rebuilt Striker dashboards, Anvil! nodes or Disaster Recivery hosts. Specifically, it allows machines to boot off their BCN network interface and install the base operating system.</key>
<keyname="striker_0110">The 'Install Target' feature is used to do base (stage 1) installs on new or rebuilt Striker dashboards, #!string!brand_0006!# nodes or Disaster Recivery hosts. Specifically, it allows machines to boot off their BCN network interface and install the base operating system.</key>
<keyname="striker_0111">The 'Install Target' disable job has been requested. It should be completed in a few moments. You may need to reload the next page in a minute to see that it has been enabled.</key>
<keyname="striker_0111">The 'Install Target' disable job has been requested. It should be completed in a few moments. You may need to reload the next page in a minute to see that it has been enabled.</key>
<keyname="striker_0112">The 'Install Target' enabled job has been requested. It should be completed in a few moments. You may need to reload the next page in a minute to see that it has been disabled.</key>
<keyname="striker_0112">The 'Install Target' enabled job has been requested. It should be completed in a few moments. You may need to reload the next page in a minute to see that it has been disabled.</key>
<keyname="striker_0113">Anvil! Configuration and Management.</key>
<keyname="striker_0113">#!string!brand_0006!# Configuration and Management.</key>
<keyname="striker_0114">Create a new Anvil! system.</key>
<keyname="striker_0114">Create a new #!string!brand_0006!# system.</key>
<keyname="striker_0115">Any running jobs, or jobs that have ended recently, are displayed below.</key>
<keyname="striker_0115">Any running jobs, or jobs that have ended recently, are displayed below.</key>
<keyname="striker_0116">Initialize an Anvil! node or disaster recovery target.</key>
<keyname="striker_0116">Initialize an #!string!brand_0006!# node or disaster recovery target.</key>
<keyname="striker_0118">Prepare a new machine for use as an Anvil! node or DR (disaster recovery) host. This process will setup the repository, install the appropriate anvil packages and link it to the Anvil! databases on the Strikers you choose.</key>
<keyname="striker_0118">Prepare a new machine for use as an #!string!brand_0006!# node or DR (disaster recovery) host. This process will setup the repository, install the appropriate anvil packages and link it to the #!string!brand_0006!# databases on the Strikers you choose.</key>
<keyname="striker_0140">Indicates when the last time the networks connected to this host were scanned. The scan is done to help find the IP addresses assigned to hosted servers and virtual machine equipment. The scan is a simple, sequential nmap ping scan in an attempt to be as non-invasive as possible. The frequency of these scans can be controlled by setting 'network-scan::scan-period' to a number of seconds (the current value is: [#!data!network-scan::scan-period!# seconds]).</key>
<keyname="striker_0140">Indicates when the last time the networks connected to this host were scanned. The scan is done to help find the IP addresses assigned to hosted servers and virtual machine equipment. The scan is a simple, sequential nmap ping scan in an attempt to be as non-invasive as possible. The frequency of these scans can be controlled by setting 'network-scan::scan-period' to a number of seconds (the current value is: [#!data!network-scan::scan-period!# seconds]).</key>
<keyname="striker_0141">Configure the network interfaces for this host.</key>
<keyname="striker_0141">Configure the network interfaces for this host.</key>
<keyname="striker_0142"><![CDATA[This step renames the real network interfaces, pairs them into redundant bonds and creates bridges for connecting to hosted servers.<br /><br />IPs and host names are optional, and can be set when assembling this host into an Anvil! system later.]]></key>
<keyname="striker_0142"><![CDATA[This step renames the real network interfaces, pairs them into redundant bonds and creates bridges for connecting to hosted servers.<br /><br />IPs and host names are optional, and can be set when assembling this host into an #!string!brand_0006!# system later.]]></key>
<keyname="striker_0143">If you would like to change the host name now, you can do so here. When adding this machine to an Anvil!, the host name will be set there as well making this optional.</key>
<keyname="striker_0143">If you would like to change the host name now, you can do so here. When adding this machine to an #!string!brand_0006!#, the host name will be set there as well making this optional.</key>
<keyname="striker_0144">This is the network gateway used to access the outside world. We'll match it to the appropriate network interface.</key>
<keyname="striker_0144">This is the network gateway used to access the outside world. We'll match it to the appropriate network interface.</key>
<keyname="striker_0145">If left blank, the interface will be configured for DHCP.</key>
<keyname="striker_0145">If left blank, the interface will be configured for DHCP.</key>
<keyname="striker_0202">This puts the host into network mapping mode. In this most, most functions are disabled and the link status of network interfaces are closely monitored.</key>
<keyname="striker_0202">This puts the host into network mapping mode. In this most, most functions are disabled and the link status of network interfaces are closely monitored.</key>
<keyname="striker_0203">Create or Run an Install Manifest</key>
<keyname="striker_0203">Create or Run an Install Manifest</key>
<keyname="striker_0204">Create a new Install Manifest; The instructions used to assemble/repair a given Anvil! system.</key>
<keyname="striker_0204">Create a new Install Manifest; The instructions used to assemble/repair a given #!string!brand_0006!# system.</key>
<keyname="striker_0205">Existing Manifests:</key>
<keyname="striker_0205">Existing Manifests:</key>
<keyname="striker_0206">Run</key>
<keyname="striker_0206">Run</key>
<keyname="striker_0207">Edit</key>
<keyname="striker_0207">Edit</key>
@ -1328,9 +1338,9 @@ If you are comfortable that the target has changed for a known reason, you can s
@ -1350,6 +1360,7 @@ If you are comfortable that the target has changed for a known reason, you can s
<keyname="striker_0246">This is a one to five character prefix used to identify the department, organization, or company whose servers will run on this #!string!brand_0006!#. You can use letters and numbers and set whatever makes sense to you.</key>
<keyname="striker_0246">This is a one to five character prefix used to identify the department, organization, or company whose servers will run on this #!string!brand_0006!#. You can use letters and numbers and set whatever makes sense to you.</key>
<keyname="striker_0247">This is the domain name you would like to use for this #!string!brand_0006!#. This will be used in the next step when setting default hostnames for various devices.</key>
<keyname="striker_0247">This is the domain name you would like to use for this #!string!brand_0006!#. This will be used in the next step when setting default hostnames for various devices.</key>
<keyname="striker_0248">The second step specified the networks (subnets) that will be used for each network. Generally, you only want to change the IFN(s). The BCN and SN are always '/16' subnets and should only be changed if they conflict with an existing IFN.</key>
<keyname="striker_0248">The second step specified the networks (subnets) that will be used for each network. Generally, you only want to change the IFN(s). The BCN and SN are always '/16' subnets and should only be changed if they conflict with an existing IFN.</key>
<keyname="striker_0249">Default</key>
<!-- These are generally units and appended to numbers -->
<!-- These are generally units and appended to numbers -->
@ -1487,7 +1498,7 @@ Here we will inject 't_0006', which injects 't_0001' which has a variable: [#!st
<keyname="warning_0012">[ Warning ] - Failed to log into the host. Is the IP or root user's password right?</key>
<keyname="warning_0012">[ Warning ] - Failed to log into the host. Is the IP or root user's password right?</key>
<keyname="warning_0013"><![CDATA[[ Warning ] - The target's host key has changed. If the target has been rebuilt, or the target IP reused, the old key will need to be removed. <a href="?striker=true&task=keys" target="_new">Click here</a> to resolve.]]></key>
<keyname="warning_0013"><![CDATA[[ Warning ] - The target's host key has changed. If the target has been rebuilt, or the target IP reused, the old key will need to be removed. <a href="?striker=true&task=keys" target="_new">Click here</a> to resolve.]]></key>
<keyname="warning_0014">[ Warning ] - The host UUID: [#!variable!host_uuid!#] was not found in the #!data!path::json::all_status!# file on the local dashboard.</key>
<keyname="warning_0014">[ Warning ] - The host UUID: [#!variable!host_uuid!#] was not found in the #!data!path::json::all_status!# file on the local dashboard.</key>
<keyname="warning_0015">[ Warning ] - To configure a host as either an Anvil! node or a disaster recovery host, there must be at least 6 network interfaces. This machine only has: [#!variable!interface_count!#] interfaces.</key>
<keyname="warning_0015">[ Warning ] - To configure a host as either an #!string!brand_0002!# node or a disaster recovery host, there must be at least 6 network interfaces. This machine only has: [#!variable!interface_count!#] interfaces.</key>
<keyname="warning_0016">[ Warning ] - No databases are available. Changes to the network interfaces will be cached.</key>
<keyname="warning_0016">[ Warning ] - No databases are available. Changes to the network interfaces will be cached.</key>
<keyname="warning_0017">[ Warning ] - The subnet mask is not valid</key>
<keyname="warning_0017">[ Warning ] - The subnet mask is not valid</key>
<keyname="warning_0018">[ Warning ] - The IP address was specified, but the subnet mask was not</key>
<keyname="warning_0018">[ Warning ] - The IP address was specified, but the subnet mask was not</key>
Digimer
5 years ago