* Added packages needed to support offline machines to striker-manage-install-target.

* Cleaned up the returned 'return_code' in System->call() when background is true.

Signed-off-by: Digimer <digimer@alteeve.ca>

Anvil/Tools/System.pm

@@ -317,9 +317,14 @@ sub call
 				# Report that it started with PID.
 				$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, secure => $secure, key => "log_0205", variables => { call => $shell_call, pid => $process->pid }});
 				
-				# We'll return the handle instead of output.
+				# We'll return the handle instead of output. There's no return code from the
-				$output = $process;
+				# program, so set it to 0 to show we initiated the program in the background.
-				$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, secure => $secure, list => { output => $output }});
+				$return_code = 0;
+				$output      = $process;
+				$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, secure => $secure, list => { 
+					return_code => $return_code, 
+					output      => $output,
+				}});
 			}
 			else
 			{

rpm/SPECS/anvil.spec

@@ -204,6 +204,7 @@ sed -i.anvil 's/SELINUX=enforcing/SELINUX=permissive/' /etc/selinux/config
 setenforce 0
 sed -i "1s/^.*$/%{version}-%{release}/" /%{_sysconfdir}/anvil/anvil.version
 # Enable and start the anvil-daemon
+### TODO: check it if was disabled (if it existed before) and, if so, leave it disabled.
 systemctl enable anvil-daemon.service
 systemctl start anvil-daemon.service
 
@@ -348,7 +349,7 @@ fi
 
 
 %changelog
-* Wed Nov 6 2019 Madison Kelly <mkelly@alteeve.ca> 3.0-29
+* Thu Nov 7 2019 Madison Kelly <mkelly@alteeve.ca> 3.0-29
 - Added '/etc/anvil/type.X' file creation to more directly mark a system as a 
   specific type, rather than divining by name.
 - Updated source.

tools/striker-manage-install-target

@@ -1112,8 +1112,9 @@ sub load_packages
 		}
 	}
 	
-	### TODO: These need to be sorted into groups by their first letter, and those groups need to go under Packages
+	### NOTE: If/when we support other archs, removing '.x86_64/.noarch' would cause all available archs 
-	### TODO: Update this for EL8
+	###       to be downloaded (including .ix86, which would waste space...). Decide if it's best to 
+	###       explicitely declare archs vs using space/bandwidth to just grab all available.
 	# This is the list of packages we need to download.
 	$anvil->data->{packages} = {
 		a	=>	[
@@ -1135,6 +1136,7 @@ sub load_packages
 			"apr-util-openssl.x86_64",
 			"apr-util.x86_64",
 			"apr.x86_64",
+			"aspell.x86_64",
 			"at-spi2-atk.x86_64",
 			"at-spi2-core.x86_64",
 			"atk.x86_64",
@@ -1254,6 +1256,7 @@ sub load_packages
 			#"dnf-utils.noarch",
 			"dnf.noarch",
 			"dnsmasq.x86_64",
+			"dosfstools.x86_64",
 			"dracut-config-rescue.x86_64",
 			"dracut-network.x86_64",
 			"dracut-squash.x86_64",
@@ -1338,6 +1341,7 @@ sub load_packages
 			"gcr.x86_64",
 			"gdbm-libs.x86_64",
 			"gdbm.x86_64",
+			"gdisk.x86_64",
 			"gdk-pixbuf2-modules.x86_64",
 			"gdk-pixbuf2.x86_64",
 			"gdm.x86_64",
@@ -1409,6 +1413,8 @@ sub load_packages
 			"gtk-vnc2.x86_64",
 			"gtk2.x86_64",
 			"gtk3.x86_64",
+			"gvfs.x86_64",
+			"gvfs-client.x86_64",
 			"gvnc.x86_64",
 			"gzip.x86_64",
 		],
@@ -1533,15 +1539,28 @@ sub load_packages
 			"libarchive.x86_64",
 			"libassuan.x86_64",
 			"libasyncns.x86_64",
+			"libatasmart.x86_64",
 			"libattr.x86_64",
 			"libbasicobjects.x86_64",
 			"libblkid.x86_64",
+			"libbytesize.x86_64",
+			"libbluray.x86_64",
 			"libcacard.x86_64",
 			"libcanberra-gtk3.x86_64",
 			"libcanberra.x86_64",
 			"libcap-ng.x86_64",
 			"libcap.x86_64",
+			"libcdio.x86_64",
+			"libcdio-paranoia.x86_64",
 			"libcgroup.x86_64",
+			"libblockdev.x86_64",
+			"libblockdev-crypto.x86_64", 
+			"libblockdev-fs.x86_64",
+			"libblockdev-loop.x86_64",
+			"libblockdev-mdraid.x86_64",
+			"libblockdev-part.x86_64",
+			"libblockdev-swap.x86_64",
+			"libblockdev-utils.x86_64",
 			"libcollection.x86_64",
 			"libcom_err.x86_64",
 			"libcomps.x86_64",
@@ -1623,6 +1642,7 @@ sub load_packages
 			"libnl3.x86_64",
 			"libnma.x86_64",
 			"libnotify.x86_64",
+			"libnozzle1.x86_64",
 			"libnsl2.x86_64",
 			"liboauth.x86_64",
 			"libogg.x86_64",
@@ -1664,6 +1684,7 @@ sub load_packages
 			"libsoup.x86_64",
 			"libss.x86_64",
 			"libssh.x86_64",
+			"libssh-config.noarch",
 			"libssh2.x86_64",
 			"libsss_autofs.x86_64",
 			"libsss_certmap.x86_64",
@@ -1683,6 +1704,7 @@ sub load_packages
 			"libtiff.x86_64",
 			"libtirpc.x86_64",
 			"libtool-ltdl.x86_64",
+			"libudisks2.x86_64",
 			"libunistring.x86_64",
 			"libusal.x86_64",
 			"libusbmuxd.x86_64",
@@ -1761,6 +1783,7 @@ sub load_packages
 			"mailcap.noarch",
 			"man-db.x86_64",
 			"mcpp.x86_64",
+			"mdadm.x86_64",
 			"mesa-dri-drivers.x86_64",
 			"mesa-filesystem.x86_64",
 			"mesa-libEGL.x86_64",
@@ -1774,6 +1797,7 @@ sub load_packages
 			"ModemManager-glib.x86_64",
 			"mozilla-filesystem.x86_64",
 			"mozjs52.x86_64",
+			"mozjs60.x86_64",
 			"mpfr.x86_64",
 			"mtdev.x86_64",
 			"mtools.x86_64",
@@ -2046,6 +2070,7 @@ sub load_packages
 			#"python3-IPy.noarch",
 			"python3-asn1crypto.noarch",
 			"python3-audit.x86_64",
+			"python3-argcomplete.noarch",
 			"python3-bind.noarch",
 			"python3-cairo.x86_64",
 			"python3-cffi.x86_64",
@@ -2082,6 +2107,7 @@ sub load_packages
 			"python3-perf.x86_64",
 			"python3-pexpect.noarch",
 			"python3-pip.noarch",
+			"python3-pip-wheel.noarch",
 			"python3-ply.noarch",
 			"python3-policycoreutils.noarch",
 			"python3-ptyprocess.noarch",
@@ -2095,6 +2121,7 @@ sub load_packages
 			"python3-schedutils.x86_64",
 			"python3-setools.x86_64",
 			"python3-setuptools.noarch",
+			"python3-setuptools-wheel.noarch",
 			"python3-six.noarch",
 			"python3-slip-dbus.noarch",
 			"python3-slip.noarch",
@@ -2105,6 +2132,7 @@ sub load_packages
 			"python3-unbound.x86_64",
 			"python3-urllib3.noarch",
 			"python3-webencodings.noarch",
+			"python36.x86_64",
 		],
 		'q'	=>	[
 			"qemu-guest-agent.x86_64",
@@ -2203,6 +2231,7 @@ sub load_packages
 			"systemd.x86_64",
 		],
 		t	=>	[
+			"tar.x86_64",
 			"tcl.x86_64", 
 			"teamd.x86_64",
 			"telnet.x86_64",
@@ -2216,6 +2245,7 @@ sub load_packages
 			"tzdata.noarch",
 		],
 		u	=>	[
+			"udisks2.x86_64",
 			"unbound-libs.x86_64",
 			"upower.x86_64",
 			"usbredir.x86_64",
@@ -2234,6 +2264,7 @@ sub load_packages
 			"virt-manager-common.noarch",
 			"virt-manager.noarch",
 			"virt-what.x86_64",
+			"volume_key-libs.x86_64",
 			"vte-profile.x86_64",
 			"vte291.x86_64",
 		],