* Got more work done on confirming the user's request to setup the network of a node or DR host.
* Reworked network select boxes to sort by the network name instead of the MAC address.
Signed-off-by: Digimer <digimer@alteeve.ca>
<keyname="striker_0140">Indicates when the last time the networks connected to this host were scanned. The scan is done to help find the IP addresses assigned to hosted servers and virtual machine equipment. The scan is a simple, sequential nmap ping scan in an attempt to be as non-invasive as possible. The frequency of these scans can be controlled by setting 'network-scan::scan-period' to a number of seconds (the current value is: [#!data!network-scan::scan-period!# seconds]).</key>
<keyname="striker_0140">Indicates when the last time the networks connected to this host were scanned. The scan is done to help find the IP addresses assigned to hosted servers and virtual machine equipment. The scan is a simple, sequential nmap ping scan in an attempt to be as non-invasive as possible. The frequency of these scans can be controlled by setting 'network-scan::scan-period' to a number of seconds (the current value is: [#!data!network-scan::scan-period!# seconds]).</key>
<keyname="striker_0141">Configure the network interfaces for this host.</key>
<keyname="striker_0141">Configure the network interfaces for this host.</key>
<keyname="striker_0142">This step renames the real network interfaces, pairs them into redundant bonds and creates brodges for connecting to hosted servers. IPs and host names are optional, and can be set when assembling this host into an Anvil! system.</key>
<keyname="striker_0142"><![CDATA[This step renames the real network interfaces, pairs them into redundant bonds and creates bridges for connecting to hosted servers.<br /><br />IPs and host names are optional, and can be set when assembling this host into an Anvil! system later.]]></key>
<keyname="striker_0143">If you would like to change the host name now, you can do so here. When adding this machine to an Anvil!, the host name will be set there as well making this optional.</key>
<keyname="striker_0143">If you would like to change the host name now, you can do so here. When adding this machine to an Anvil!, the host name will be set there as well making this optional.</key>
<keyname="striker_0144">This is the network gateway used to access the outside world. We'll match it to the appropriate network interface.</key>
<keyname="striker_0144">This is the network gateway used to access the outside world. We'll match it to the appropriate network interface.</key>
<keyname="striker_0145">If left blank, the interface will be configured for DHCP.</key>
@ -1052,6 +1060,9 @@ If you are comfortable that the target has changed for a known reason, you can s
<keyname="prefix_0001">[ Error ] - </key>
<keyname="prefix_0001">[ Error ] - </key>
<keyname="prefix_0002">[ Warning ] - </key>
<keyname="prefix_0002">[ Warning ] - </key>
<keyname="prefix_0003">[ Note ] - </key>
<keyname="prefix_0003">[ Note ] - </key>
<keyname="prefix_0004">Error</key>
<keyname="prefix_0005">Warning</key>
<keyname="prefix_0006">Note</key>
<!-- Strings used by jobs -->
<!-- Strings used by jobs -->
<keyname="job_0001">Configure Network</key>
<keyname="job_0001">Configure Network</key>
@ -1129,23 +1140,27 @@ Failure! The return code: [#!variable!return_code!#] was received ('0' was expec
<keyname="job_0069">Unable to find a matching network, skipping this database.</key>
<keyname="job_0069">Unable to find a matching network, skipping this database.</key>
<keyname="job_0070">Something went wrong adding this database. Please see: [#!data!path::log::main!#] for details.</key>
<keyname="job_0070">Something went wrong adding this database. Please see: [#!data!path::log::main!#] for details.</key>
<!-- Warnings: TODO: Take 'striker_' off-->
<!-- Warnings -->
<keyname="striker_warning_0001">The IP address will change. You will need to reconnect after applying these changes.</key>
<keyname="warning_0001">The IP address will change. You will need to reconnect after applying these changes.</key>
<keyname="striker_warning_0002">The access information appears to not be valid.</key>
<keyname="warning_0002">The access information appears to not be valid.</key>
<keyname="striker_warning_0003">Test access to the peer (using SSH) failed. There may be details in the log file.</key>
<keyname="warning_0003">Test access to the peer (using SSH) failed. There may be details in the log file.</key>
<keyname="striker_warning_0004">Accessing the peer over SSH worked, but a test connection to the database failed.</key>
<keyname="warning_0004">Accessing the peer over SSH worked, but a test connection to the database failed.</key>
<keyname="striker_warning_0005">There was a problem reading the peer's UUID. Read: [#!variable!uuid!#], which appears to be invalid.</key>
<keyname="warning_0005">There was a problem reading the peer's UUID. Read: [#!variable!uuid!#], which appears to be invalid.</key>
<keyname="striker_warning_0006">An SSH connection was established to: [#!variable!target!#], but we failed to establish a channel. The last error was: [#!variable!error!#].</key>
<keyname="warning_0006">An SSH connection was established to: [#!variable!target!#], but we failed to establish a channel. The last error was: [#!variable!error!#].</key>
<keyname="striker_warning_0007">The job: [#!variable!command!#] was picked up by: [#!variable!pid!#], but that process is not running and it appears to only be: [#!variable!percent!# %] complete. Restarting the job.</key>
<keyname="warning_0007">The job: [#!variable!command!#] was picked up by: [#!variable!pid!#], but that process is not running and it appears to only be: [#!variable!percent!# %] complete. Restarting the job.</key>
<keyname="striker_warning_0008">Unable to find a local IP on the same subnet as the IP/host: [#!variable!host!#] given for the target. Bi-directional setup not currently possible.</key>
<keyname="warning_0008">Unable to find a local IP on the same subnet as the IP/host: [#!variable!host!#] given for the target. Bi-directional setup not currently possible.</key>
<keyname="striker_warning_0009">The subtask request for manipulating the 'Install Target' feature is not valid. It should be 'enabled' or 'disabled'</key><!-- NOTE: 'enabled' and 'disabled' are variable values, don't translate them. -->
<keyname="warning_0009">The subtask request for manipulating the 'Install Target' feature is not valid. It should be 'enabled' or 'disabled'</key><!-- NOTE: 'enabled' and 'disabled' are variable values, don't translate them. -->
<keyname="striker_warning_0010">The IP address is not a valid IPv4 address</key>
<keyname="warning_0010">The IP address: [#!variable!ip_address!#] is not a valid IPv4 address</key>
<keyname="striker_warning_0011">The SSH port is not a valid (usually it is 22, but it has to be between 1 ~ 65536)</key>
<keyname="warning_0011">The SSH port is not a valid (usually it is 22, but it has to be between 1 ~ 65536)</key>
<keyname="striker_warning_0012">Failed to log into the host. Is the IP or root user's password right?</key>
<keyname="warning_0012">Failed to log into the host. Is the IP or root user's password right?</key>
<keyname="striker_warning_0013"><![CDATA[The target's host key has changed. If the target has been rebuilt, or the target IP reused, the old key will need to be removed. <a href="?striker=true&task=keys" target="_new">Click here</a> to resolve.]]></key>
<keyname="warning_0013"><![CDATA[The target's host key has changed. If the target has been rebuilt, or the target IP reused, the old key will need to be removed. <a href="?striker=true&task=keys" target="_new">Click here</a> to resolve.]]></key>
<keyname="striker_warning_0014">The host UUID: [#!variable!host_uuid!#] was not found in the #!data!path::json::all_status!# file on the local dashboard.</key>
<keyname="warning_0014">The host UUID: [#!variable!host_uuid!#] was not found in the #!data!path::json::all_status!# file on the local dashboard.</key>
<keyname="striker_warning_0015">To configure a host as either an Anvil! node or a disaster recovery host, there must be at least 6 network interfaces. This machine only has: [#!variable!interface_count!#] interfaces.</key>
<keyname="warning_0015">To configure a host as either an Anvil! node or a disaster recovery host, there must be at least 6 network interfaces. This machine only has: [#!variable!interface_count!#] interfaces.</key>
<keyname="warning_0016">No databases are available. Changes to the network interfaces will be cached.</key>
<keyname="warning_0016">No databases are available. Changes to the network interfaces will be cached.</key>
<keyname="warning_0017">The subnet mask is not valid</key>
<keyname="warning_0018">The IP address was specified, but the subnet mask was not</key>
<keyname="warning_0019">The passed in parameter '#!variable!parameter!#': [#!variable!ip_address!#] is not a valid IPv4 address.</key>
<keyname="warning_0020">The passed in parameter '#!variable!parameter!#': [#!variable!subnet_mask!#] is not a valid IPv4 subnet mask.</key>
<!-- Errors -->
<!-- Errors -->
<keyname="error_0001">There are not enough network interfaces on this machine. You have: [#!variable!interface_count!#] interface(s), and you need at least: [#!variable!required_interfaces_for_single!#] interfaces to connect to the requested networks (one for Back-Channel and one for each Internet-Facing network).</key>
<keyname="error_0001">There are not enough network interfaces on this machine. You have: [#!variable!interface_count!#] interface(s), and you need at least: [#!variable!required_interfaces_for_single!#] interfaces to connect to the requested networks (one for Back-Channel and one for each Internet-Facing network).</key>
print" Up delay: [".$say_up_delay." (".$up_delay.")], Down delay: [".$say_down_delay." (".$down_delay.")], MII polling interval: [".$mii_polling_interval."]\n";
Digimer
5 years ago