@ -14,11 +14,15 @@ our $VERSION = "3.0.0";
my $ THIS_FILE = "Cluster.pm" ; my $ THIS_FILE = "Cluster.pm" ;
### Methods; ### Methods;
# boot_server
# check_node_status # check_node_status
# get_peers # get_peers
# migrate_server
# parse_cib # parse_cib
# shutdown_server
# start_cluster # start_cluster
# which_node # which_node
# _set_server_constraint
= pod = pod
@ -78,6 +82,162 @@ sub parent
# Public methods # # Public methods #
############################################################################################################# #############################################################################################################
= head2 boot_server
This uses pacemaker to boot a server .
If there is a problem , C << ! ! error ! ! >> is returned .
Parameters ;
= head3 server ( required )
This is the name of the server to boot .
= head3 node ( optional )
If set , a resource constraint is placed so that the server prefers one node over the other before it boots .
B << Note >> ; The method relies on pacemaker to boot the node . As such , if for some reason it decides the server can not be booted on the prefered node , it may boot on the other node . As such , this parameter does not guarantee that the server will be booted on the target node !
= head3 wait ( optional , default '1' )
This controls whether the method waits for the server to shut down before returning . By default , it will go into a loop and check every 2 seconds to see if the server is still running . Once it ' s found to be off , the method returns . If this is set to C << 0 >> , the method will return as soon as the request to shut down the server is issued .
= cut
sub boot_server
{
my $ self = shift ;
my $ parameter = shift ;
my $ anvil = $ self - > parent ;
my $ debug = defined $ parameter - > { debug } ? $ parameter - > { debug } : 3 ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0125" , variables = > { method = > "Cluster->boot_server()" } } ) ;
my $ node = defined $ parameter - > { node } ? $ parameter - > { node } : "" ;
my $ server = defined $ parameter - > { server } ? $ parameter - > { server } : "" ;
my $ wait = defined $ parameter - > { 'wait' } ? $ parameter - > { 'wait' } : 1 ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
node = > $ node ,
server = > $ server ,
'wait' = > $ wait ,
} } ) ;
if ( not $ server )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0020" , variables = > { method = > "Cluster->boot_server()" , parameter = > "server" } } ) ;
return ( "!!error!!" ) ;
}
my $ host_type = $ anvil - > Get - > host_type ( { debug = > $ debug } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { host_type = > $ host_type } } ) ;
if ( $ host_type ne "node" )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0146" , variables = > { server = > $ server } } ) ;
return ( "!!error!!" ) ;
}
my $ problem = $ anvil - > Cluster - > parse_cib ( { debug = > $ debug } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { problem = > $ problem } } ) ;
if ( $ problem )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0145" , variables = > { server = > $ server } } ) ;
return ( '!!error!!' ) ;
}
# Is this node fully in the cluster?
if ( not $ anvil - > data - > { cib } { parsed } { 'local' } { ready } )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0147" , variables = > { server = > $ server } } ) ;
return ( '!!error!!' ) ;
}
# Is the server one we know of?
if ( not exists $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } )
{
# The server isn't in the pacemaker config.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0149" , variables = > { server = > $ server } } ) ;
return ( '!!error!!' ) ;
}
# Is the server already running? If so, do nothing.
my $ status = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { status } ;
my $ host = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { host } ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
status = > $ status ,
host = > $ host ,
} } ) ;
if ( $ status eq "running" )
{
# Nothing to do.
if ( ( not $ node ) or ( $ host eq $ node ) )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 2 , key = > "log_0548" , variables = > { server = > $ server } } ) ;
return ( 0 ) ;
}
else
{
# It's running, but on the other node.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , key = > "warning_0059" , variables = > {
server = > $ server ,
requested_node = > $ node ,
current_host = > $ host ,
} } ) ;
return ( 0 ) ;
}
}
if ( $ node )
{
$ anvil - > Cluster - > _set_server_constraint ( {
server = > $ server ,
preferred_node = > $ node ,
} ) ;
}
# Now boot the server.
my ( $ output , $ return_code ) = $ anvil - > System - > call ( { debug = > 3 , shell_call = > $ anvil - > data - > { path } { exe } { pcs } . " resource enable " . $ server } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
output = > $ output ,
return_code = > $ return_code ,
} } ) ;
if ( not $ wait )
{
# We're done.
return ( 0 ) ;
}
# Wait now for the server to start.
my $ waiting = 1 ;
while ( $ waiting )
{
$ anvil - > Cluster - > parse_cib ( { debug = > $ debug } ) ;
my $ status = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { status } ;
my $ host = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { host } ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
status = > $ status ,
host = > $ host ,
} } ) ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 2 , key = > "log_0552" , variables = > { server = > $ server } } ) ;
if ( $ host eq "running" )
{
# It's up.
$ waiting = 0 ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , key = > "log_0553" , variables = > { server = > $ server } } ) ;
}
else
{
# Wait a bit and check again.
sleep 2 ;
}
}
return ( 0 ) ;
}
= head2 check_node_status = head2 check_node_status
This takes a node name ( generally the short host name ) and , using a C << parse_cib >> call data ( made before calling this method ) , the node ' s ready state will be checked . If the node is ready , C << 1 >> is returned . If not , C << 0 >> is returned . If there is a problem , C << ! ! error ! ! >> is returned . This takes a node name ( generally the short host name ) and , using a C << parse_cib >> call data ( made before calling this method ) , the node ' s ready state will be checked . If the node is ready , C << 1 >> is returned . If not , C << 0 >> is returned . If there is a problem , C << ! ! error ! ! >> is returned .
@ -104,7 +264,7 @@ sub check_node_status
if ( not $ node_name ) if ( not $ node_name )
{ {
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0020" , variables = > { method = > "Database ->get_host_from_uuid()" , parameter = > "host_uuid" } } ) ; $ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0020" , variables = > { method = > "Cluster ->get_host_from_uuid()" , parameter = > "host_uuid" } } ) ;
return ( "!!error!!" ) ; return ( "!!error!!" ) ;
} }
@ -202,7 +362,7 @@ sub get_peers
elsif ( $ host_uuid eq $ anvil_node2_host_uuid ) elsif ( $ host_uuid eq $ anvil_node2_host_uuid )
{ {
# Found our Anvil!, and we're node 1. # Found our Anvil!, and we're node 1.
$ found = 1 ; $ found = 1 ;
$ anvil - > data - > { sys } { anvil } { i_am } = "node2" ; $ anvil - > data - > { sys } { anvil } { i_am } = "node2" ;
$ anvil - > data - > { sys } { anvil } { peer_is } = "node1" ; $ anvil - > data - > { sys } { anvil } { peer_is } = "node1" ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { $ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
@ -248,6 +408,181 @@ sub get_peers
return ( $ peer ) ; return ( $ peer ) ;
} }
= head2 migrate_server
This manipulates pacemaker ' s location constraints to trigger a pacemaker - controlled migration of one or more servers .
This method works by confirming that the server is running and it not on the target C << node >> . If the server is server indeed needs to be migrated , a location constraint is set to give preference to the target node . Optionally , this method can wait until the migration is complete .
B << Note >> : This method does not make the actual C << virsh >> call ! To perform a migration B << OUTSIDE >> pacemaker , use C << Server - > migrate_virsh ( ) >> .
Parameters ;
= head3 server ( required )
This is the server to migrate .
= head3 node ( required )
This is the name of the node to move the server to .
= head3 wait ( optional , default '1' )
This controls whether the method waits for the server to shut down before returning . By default , it will go into a loop and check every 2 seconds to see if the server is still running . Once it ' s found to be off , the method returns . If this is set to C << 0 >> , the method will return as soon as the request to shut down the server is issued .
= cut
sub migrate_server
{
my $ self = shift ;
my $ parameter = shift ;
my $ anvil = $ self - > parent ;
my $ debug = defined $ parameter - > { debug } ? $ parameter - > { debug } : 3 ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0125" , variables = > { method = > "Cluster->migrate_server()" } } ) ;
my $ server = defined $ parameter - > { server } ? $ parameter - > { server } : "" ;
my $ node = defined $ parameter - > { node } ? $ parameter - > { node } : "" ;
my $ wait = defined $ parameter - > { 'wait' } ? $ parameter - > { 'wait' } : 1 ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
server = > $ server ,
node = > $ node ,
'wait' = > $ wait ,
} } ) ;
if ( not $ server )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0020" , variables = > { method = > "Cluster->migrate_server()" , parameter = > "server" } } ) ;
return ( "!!error!!" ) ;
}
my $ host_type = $ anvil - > Get - > host_type ( { debug = > $ debug } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { host_type = > $ host_type } } ) ;
if ( $ host_type ne "node" )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0154" , variables = > { server = > $ server } } ) ;
return ( "!!error!!" ) ;
}
my $ problem = $ anvil - > Cluster - > parse_cib ( { debug = > $ debug } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { problem = > $ problem } } ) ;
if ( $ problem )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0155" , variables = > { server = > $ server } } ) ;
return ( '!!error!!' ) ;
}
# Are both nodes fully in the cluster?
if ( not $ anvil - > data - > { cib } { parsed } { 'local' } { ready } )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0156" , variables = > { server = > $ server } } ) ;
return ( '!!error!!' ) ;
}
if ( not $ anvil - > data - > { cib } { parsed } { peer } { ready } )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0157" , variables = > { server = > $ server } } ) ;
return ( '!!error!!' ) ;
}
# Is the server one we know of?
if ( not exists $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } )
{
# The server isn't in the pacemaker config.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0158" , variables = > { server = > $ server } } ) ;
return ( '!!error!!' ) ;
}
# Is the server already running? If so, where?
my $ status = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { status } ;
my $ host = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { host } ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
status = > $ status ,
host = > $ host ,
} } ) ;
if ( $ status eq "off" )
{
# It's not running on either node, nothing to do.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , key = > "warning_0061" , variables = > {
server = > $ server ,
requested_node = > $ node ,
} } ) ;
return ( 0 ) ;
}
elsif ( ( $ status eq "running" ) && ( $ host eq $ node ) )
{
# Already running on the target.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 2 , key = > "log_0549" , variables = > {
server = > $ server ,
requested_node = > $ node ,
} } ) ;
return ( 0 ) ;
}
elsif ( $ status ne "running" )
{
# The server is in an unknown state.
# It's in an unknown state, abort.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , key = > "warning_0060" , variables = > {
server = > $ server ,
current_host = > $ host ,
current_state = > $ status ,
} } ) ;
return ( '!!error!!' ) ;
}
# TODO: Record that the server is migrating
# change the constraint to trigger the move.
if ( $ node )
{
$ anvil - > Cluster - > _set_server_constraint ( {
server = > $ server ,
preferred_node = > $ node ,
} ) ;
}
if ( not $ wait )
{
# We'll leave it to the scan-server scan agent to clear the migration flag from the database.
return ( 0 ) ;
}
# Wait now for the server to start.
my $ waiting = 1 ;
while ( $ waiting )
{
$ anvil - > Cluster - > parse_cib ( { debug = > $ debug } ) ;
my $ status = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { status } ;
my $ host = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { host } ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
status = > $ status ,
host = > $ host ,
} } ) ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 2 , key = > "log_0550" , variables = > {
server = > $ server ,
requested_node = > $ node ,
} } ) ;
if ( ( $ host eq "running" ) && ( $ host eq $ node ) )
{
# It's done.
$ waiting = 0 ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , key = > "log_0551" , variables = > {
server = > $ server ,
requested_node = > $ node ,
} } ) ;
}
else
{
# Wait a bit and check again.
sleep 2 ;
}
}
return ( 0 ) ;
}
= head2 parse_cib = head2 parse_cib
This reads in the CIB XML and parses it . On success , it returns C << 0 >> . On failure ( ie: pcsd isn ' t running ) , returns C << 1 >> . This reads in the CIB XML and parses it . On success , it returns C << 0 >> . On failure ( ie: pcsd isn ' t running ) , returns C << 1 >> .
@ -565,7 +900,17 @@ sub parse_cib
} } ) ; } } ) ;
# Is this me or the peer? # Is this me or the peer?
if ( ( $ node_name ne $ anvil - > Get - > host_name ) && ( $ node_name ne $ anvil - > Get - > short_host_name ) ) if ( ( $ node_name eq $ anvil - > Get - > host_name ) or ( $ node_name eq $ anvil - > Get - > short_host_name ) )
{
# Me.
$ anvil - > data - > { cib } { parsed } { 'local' } { ready } = $ node_name ;
$ anvil - > data - > { cib } { parsed } { 'local' } { name } = $ node_name ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
"cib::parsed::local::ready" = > $ anvil - > data - > { cib } { parsed } { 'local' } { ready } ,
"cib::parsed::local::name" = > $ anvil - > data - > { cib } { parsed } { 'local' } { name } ,
} } ) ;
}
else
{ {
# It's our peer. # It's our peer.
$ anvil - > data - > { cib } { parsed } { peer } { ready } = $ ready ; $ anvil - > data - > { cib } { parsed } { peer } { ready } = $ ready ;
@ -701,10 +1046,300 @@ sub parse_cib
} } ) ; } } ) ;
} }
# Hosted server information
foreach my $ id ( sort { $ a cmp $ b } keys % { $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } } )
{
my $ node_name = $ anvil - > data - > { cib } { parsed } { configuration } { nodes } { $ id } { uname } ;
foreach my $ lrm_id ( sort { $ a cmp $ b } keys % { $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } } )
{
foreach my $ lrm_resource_id ( sort { $ a cmp $ b } keys % { $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } } )
{
my $ lrm_resource_operations_count = keys % { $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } { $ lrm_resource_id } { lrm_rsc_op_id } } ;
foreach my $ lrm_rsc_op_id ( sort { $ a cmp $ b } keys % { $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } { $ lrm_resource_id } { lrm_rsc_op_id } } )
{
my $ type = $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } { $ lrm_resource_id } { type } ;
my $ class = $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } { $ lrm_resource_id } { class } ;
my $ operation = $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } { $ lrm_resource_id } { lrm_rsc_op_id } { $ lrm_rsc_op_id } { operation } ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
lrm_resource_operations_count = > $ lrm_resource_operations_count ,
type = > $ type ,
class = > $ class ,
operation = > $ operation ,
lrm_rsc_op_id = > $ lrm_rsc_op_id ,
} } ) ;
# Skip unless it's a server.
next if $ type ne "server" ;
# This will be updated below if the server is running.
if ( not exists $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } )
{
$ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { status } = "off" ;
$ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_operation } = "unknown" ;
$ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_operation_rc_code } = "-1" ;
$ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { host } = "" ;
$ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_monitor_rc_code } = "-1" ;
$ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_failure_operation } = "" ;
$ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_failure_return_code } = "-1" ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
"cib::parsed::data::server::${lrm_resource_id}::status" = > $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { status } ,
"cib::parsed::data::server::${lrm_resource_id}::host" = > $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { host } ,
"cib::parsed::data::server::${lrm_resource_id}::last_monitor_rc_code" = > $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_monitor_rc_code } ,
"cib::parsed::data::server::${lrm_resource_id}::last_operation" = > $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_operation } ,
"cib::parsed::data::server::${lrm_resource_id}::last_operation_rc_code" = > $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_operation_rc_code } ,
"cib::parsed::data::server::${lrm_resource_id}::last_failure_operation" = > $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_operation } ,
"cib::parsed::data::server::${lrm_resource_id}::last_failure_return_code" = > $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_failure_return_code } ,
} } ) ;
}
# If there are two LRM resource operation IDs, then the server is
# running on this node. Generally (always?) there will be a
# '$lrm_rsc_op_id' called '<server>_last_0'. If there is a second one
# with '_monitor' in it, the server is running locally (we always have
# a monitor operation defined).
if ( ( $ lrm_resource_operations_count > 1 ) && ( $ lrm_rsc_op_id !~ /_last_/ ) )
{
# The server is (should be) running.
# - return code is from the RA's last status check.
# - exit-reason is the STDERR of the RA
# -
my $ last_return_code = $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } { $ lrm_resource_id } { lrm_rsc_op_id } { $ lrm_rsc_op_id } { 'rc-code' } ;
my $ status = "unknown" ;
if ( $ last_return_code eq "0" )
{
$ status = "running" ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { status = > $ status } } ) ;
}
elsif ( $ last_return_code eq "7" )
{
$ status = "stopped" ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { status = > $ status } } ) ;
}
else
{
$ status = "error_condition - rc: " . $ last_return_code ;
# Log all variables in case there is anything useful.
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , list = > { status = > $ status } } ) ;
foreach my $ variable ( sort { $ a cmp $ b } keys % { $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } { $ lrm_resource_id } { lrm_rsc_op_id } { $ lrm_rsc_op_id } } )
{
my $ value = $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } { $ lrm_resource_id } { lrm_rsc_op_id } { $ lrm_rsc_op_id } { $ variable } ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , list = > {
"cib::parsed::cib::status::node_state::${id}::lrm_id::${lrm_id}::lrm_resource::${lrm_resource_id}::lrm_rsc_op_id::${lrm_rsc_op_id}::${variable}" = > $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } { $ lrm_resource_id } { lrm_rsc_op_id } { $ lrm_rsc_op_id } { $ variable } ,
} } ) ;
}
}
$ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { status } = $ status ;
$ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { host } = $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } { $ lrm_resource_id } { lrm_rsc_op_id } { $ lrm_rsc_op_id } { 'on_node' } ;
$ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_monitor_rc_code } = $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } { $ lrm_resource_id } { lrm_rsc_op_id } { $ lrm_rsc_op_id } { 'rc-code' } ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
"cib::parsed::data::server::${lrm_resource_id}::status" = > $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { status } ,
"cib::parsed::data::server::${lrm_resource_id}::host" = > $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { host } ,
"cib::parsed::data::server::${lrm_resource_id}::last_monitor_rc_code" = > $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_monitor_rc_code } ,
} } ) ;
}
elsif ( $ lrm_rsc_op_id =~ /_last_failure_/ )
{
$ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_failure_operation } = $ operation ;
$ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_failure_return_code } = $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } { $ lrm_resource_id } { lrm_rsc_op_id } { $ lrm_rsc_op_id } { 'rc-code' } ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
"cib::parsed::data::server::${lrm_resource_id}::last_failure_operation" = > $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_failure_operation } ,
"cib::parsed::data::server::${lrm_resource_id}::last_failure_return_code" = > $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_failure_return_code } ,
} } ) ;
}
else
{
# This isn't a monirot operation, so it will contain the most
# recent data on the server.
if ( $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_operation } eq "unknown" )
{
$ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_operation } = $ operation ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
"cib::parsed::data::server::${lrm_resource_id}::last_operation" = > $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_operation } ,
} } ) ;
}
if ( $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_operation_rc_code } eq "-1" )
{
$ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_operation_rc_code } = $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } { $ lrm_resource_id } { lrm_rsc_op_id } { $ lrm_rsc_op_id } { 'rc-code' } ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
"cib::parsed::data::server::${lrm_resource_id}::last_operation_rc_code" = > $ anvil - > data - > { cib } { parsed } { data } { server } { $ lrm_resource_id } { last_operation_rc_code } ,
} } ) ;
}
}
print "Node: [" . $ node_name . "] (" . $ id . "), lrm_id: [" . $ lrm_id . "], lrm_resource_id: [" . $ lrm_resource_id . "] (type: [" . $ type . "], class: [" . $ class . "]), lrm_rsc_op_id: [" . $ lrm_rsc_op_id . "] (" . $ lrm_resource_operations_count . ")\n" ;
foreach my $ variable ( sort { $ a cmp $ b } keys % { $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } { $ lrm_resource_id } { lrm_rsc_op_id } { $ lrm_rsc_op_id } } )
{
my $ value = $ anvil - > data - > { cib } { parsed } { cib } { status } { node_state } { $ id } { lrm_id } { $ lrm_id } { lrm_resource } { $ lrm_resource_id } { lrm_rsc_op_id } { $ lrm_rsc_op_id } { $ variable } ;
print "- Variable: [" . $ variable . "], value: [" . $ value . "]\n" ;
}
}
}
}
}
# Debug code.
foreach my $ server ( sort { $ a cmp $ b } keys % { $ anvil - > data - > { cib } { parsed } { data } { server } } )
{
my $ last_operation = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { last_operation } ;
my $ last_operation_rc_code = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { last_operation_rc_code } ;
my $ status = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { status } ;
my $ host = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { host } ;
my $ last_monitor_rc_code = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { last_monitor_rc_code } ;
my $ last_failure_operation = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { last_failure_operation } ;
my $ last_failure_return_code = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { last_failure_return_code } ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
's1:server' = > $ server ,
's2:host' = > $ host ,
's3:status' = > $ status ,
's4:last_monitor_rc_code' = > $ last_monitor_rc_code ,
's5:last_operation' = > $ last_operation ,
's6:last_operation_rc_code' = > $ last_operation_rc_code ,
's7:last_failure_operation' = > $ last_failure_operation ,
's8:last_failure_return_code' = > $ last_failure_return_code ,
} } ) ;
}
return ( $ problem ) ; return ( $ problem ) ;
} }
= head2 shutdown_server
This shuts down a server that is running on the Anvil ! system .
Parameters ;
= head3 server ( required )
This is the name of the server to shut down .
= head3 wait ( optional , default '1' )
This controls whether the method waits for the server to shut down before returning . By default , it will go into a loop and check every 2 seconds to see if the server is still running . Once it ' s found to be off , the method returns . If this is set to C << 0 >> , the method will return as soon as the request to shut down the server is issued .
= cut
sub shutdown_server
{
my $ self = shift ;
my $ parameter = shift ;
my $ anvil = $ self - > parent ;
my $ debug = defined $ parameter - > { debug } ? $ parameter - > { debug } : 3 ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0125" , variables = > { method = > "Cluster->shutdown_server()" } } ) ;
my $ server = defined $ parameter - > { server } ? $ parameter - > { server } : "" ;
my $ wait = defined $ parameter - > { 'wait' } ? $ parameter - > { 'wait' } : 1 ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
server = > $ server ,
'wait' = > $ wait ,
} } ) ;
if ( not $ server )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0020" , variables = > { method = > "Cluster->shutdown_server()" , parameter = > "server" } } ) ;
return ( "!!error!!" ) ;
}
my $ host_type = $ anvil - > Get - > host_type ( { debug = > $ debug } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { host_type = > $ host_type } } ) ;
if ( $ host_type ne "node" )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0150" , variables = > { server = > $ server } } ) ;
return ( "!!error!!" ) ;
}
my $ problem = $ anvil - > Cluster - > parse_cib ( { debug = > $ debug } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { problem = > $ problem } } ) ;
if ( $ problem )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0151" , variables = > { server = > $ server } } ) ;
return ( '!!error!!' ) ;
}
# Is this node fully in the cluster?
if ( not $ anvil - > data - > { cib } { parsed } { 'local' } { ready } )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0152" , variables = > { server = > $ server } } ) ;
return ( '!!error!!' ) ;
}
# Is the server one we know of?
if ( not exists $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } )
{
# The server isn't in the pacemaker config.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0153" , variables = > { server = > $ server } } ) ;
return ( '!!error!!' ) ;
}
# Is the server already running? If so, do nothing.
my $ status = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { status } ;
my $ host = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { host } ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
status = > $ status ,
host = > $ host ,
} } ) ;
if ( $ status eq "off" )
{
# Already off.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 2 , key = > "log_0548" , variables = > { server = > $ server } } ) ;
return ( 0 ) ;
}
elsif ( $ status ne "running" )
{
# It's in an unknown state, abort.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , key = > "warning_0060" , variables = > {
server = > $ server ,
current_host = > $ host ,
current_state = > $ status ,
} } ) ;
return ( '!!error!!' ) ;
}
# Now shut down the server.
my ( $ output , $ return_code ) = $ anvil - > System - > call ( { debug = > 3 , shell_call = > $ anvil - > data - > { path } { exe } { pcs } . " resource disable " . $ server } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
output = > $ output ,
return_code = > $ return_code ,
} } ) ;
if ( not $ wait )
{
# We're done.
return ( 0 ) ;
}
# Wait now for the server to start.
my $ waiting = 1 ;
while ( $ waiting )
{
$ anvil - > Cluster - > parse_cib ( { debug = > $ debug } ) ;
my $ status = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { status } ;
my $ host = $ anvil - > data - > { cib } { parsed } { data } { server } { $ server } { host } ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
status = > $ status ,
host = > $ host ,
} } ) ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 2 , key = > "log_0554" , variables = > { server = > $ server } } ) ;
if ( $ host eq "running" )
{
# Wait a bit and check again.
sleep 2 ;
}
else
{
# It's down.
$ waiting = 0 ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 2 , key = > "log_0555" , variables = > { server = > $ server } } ) ;
}
}
return ( 0 ) ;
}
= head2 start_cluster = head2 start_cluster
This will join the local node to the pacemaker cluster . Optionally , it can try to start the cluster on both nodes if C << all >> is set . This will join the local node to the pacemaker cluster . Optionally , it can try to start the cluster on both nodes if C << all >> is set .
@ -818,25 +1453,24 @@ sub which_node
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { $ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
anvil_name = > $ anvil_name , anvil_name = > $ anvil_name ,
node1_host_uuid = > $ node1_host_uuid node1_host_uuid = > $ node1_host_uuid ,
node2_host_uuid = > $ node2_host_uuid node2_host_uuid = > $ node2_host_uuid ,
} } ) ; } } ) ;
if ( $ node_uuid eq $ node1_host_uuid ) if ( $ node_uuid eq $ node1_host_uuid )
{ {
$ node_id = "node1" ; $ node_is = "node1" ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { node_id = > $ node_id } } ) ; $ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { node_is = > $ node_is } } ) ;
last ; last ;
} }
elsif ( $ node_uuid eq $ node2_host_uuid ) elsif ( $ node_uuid eq $ node2_host_uuid )
{ {
$ node_id = "node2" ; $ node_is = "node2" ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { node_id = > $ node_id } } ) ; $ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { node_is = > $ node_is } } ) ;
last ; last ;
} }
} }
return ( $ node_is ) ; return ( $ node_is ) ;
} }
@ -850,3 +1484,106 @@ sub which_node
############################################################################################################# #############################################################################################################
# Private functions # # Private functions #
############################################################################################################# #############################################################################################################
= head2 _set_server_constraint
This is a private method used to set a preferencial location constraint for a server . It takes a server name and a preferred host node . It checks to see if a location constraint exists and , if so , which node is preferred . If it is not the requested node , the constraint is updated . If no constraint exists , it is created .
Returns C << ! ! error ! ! >> if there is a problem , C << 0 >> otherwise
Parameters ;
= head3 server ( required )
This is the name of the server whose preferred host node priproty is being set .
= head3 preferred_node ( required )
This is the name the node that a server will prefer to run on .
= cut
sub _set_server_constraint
{
my $ self = shift ;
my $ parameter = shift ;
my $ anvil = $ self - > parent ;
my $ debug = defined $ parameter - > { debug } ? $ parameter - > { debug } : 3 ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0125" , variables = > { method = > "Cluster->_set_server_constraint()" } } ) ;
my $ preferred_node = defined $ parameter - > { preferred_node } ? $ parameter - > { preferred_node } : "" ;
my $ server = defined $ parameter - > { server } ? $ parameter - > { server } : "" ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
server = > $ server ,
preferred_node = > $ preferred_node ,
} } ) ;
if ( not $ server )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0020" , variables = > { method = > "Cluster->_set_server_constraint()" , parameter = > "server" } } ) ;
return ( "!!error!!" ) ;
}
if ( not $ preferred_node )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0020" , variables = > { method = > "Cluster->_set_server_constraint()" , parameter = > "preferred_node" } } ) ;
return ( "!!error!!" ) ;
}
if ( not exists $ anvil - > data - > { cib } { parsed } { data } { cluster } { name } )
{
my $ problem = $ anvil - > Cluster - > parse_cib ( { debug = > $ debug } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { problem = > $ problem } } ) ;
if ( $ problem )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0145" , variables = > { server = > $ server } } ) ;
}
}
# Is this node fully in the cluster?
if ( not $ anvil - > data - > { cib } { parsed } { 'local' } { ready } )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0148" , variables = > {
server = > $ server ,
node = > $ preferred_node ,
} } ) ;
return ( '!!error!!' ) ;
}
my $ peer_name = $ anvil - > data - > { cib } { parsed } { peer } { name } ;
my $ local_name = $ anvil - > data - > { cib } { parsed } { 'local' } { name } ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
peer_name = > $ peer_name ,
local_name = > $ local_name ,
} } ) ;
my $ shell_call = "" ;
if ( $ preferred_node eq $ peer_name )
{
$ shell_call = $ anvil - > data - > { path } { exe } { pcs } . " constraint location " . $ server . " prefers " . $ peer_name . "=200 " . $ local_name . "=100" ;
}
elsif ( $ preferred_node eq $ local_name )
{
$ shell_call = $ anvil - > data - > { path } { exe } { pcs } . " constraint location " . $ server . " prefers " . $ peer_name . "=100 " . $ local_name . "=200" ;
}
else
{
# Invalid
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "error_0144" , variables = > {
server = > $ server ,
node = > $ preferred_node ,
node1 = > $ local_name ,
node2 = > $ peer_name ,
} } ) ;
return ( "!!error!!" ) ;
}
# Change the location constraint
my ( $ output , $ return_code ) = $ anvil - > System - > call ( { debug = > 3 , shell_call = > $ shell_call } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
output = > $ output ,
return_code = > $ return_code ,
} } ) ;
return ( 0 ) ;
}
Digimer
4 years ago