@ -171,7 +171,33 @@ sub backup
if ( $ fatal ) { $ anvil - > nice_exit ( { code = > 1 } ) ; }
}
if ( $ anvil - > Network - > is_remote ( $ target ) )
if ( $ anvil - > Network - > is_local ( { host = > $ target } ) )
{
# Local file
if ( not - e $ source_file )
{
# File doesn't exist.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0151" , variables = > { source_file = > $ source_file } } ) ;
if ( $ fatal ) { $ anvil - > nice_exit ( { code = > 1 } ) ; }
}
elsif ( not - f $ source_file )
{
# Not a file
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0153" , variables = > { source_file = > $ source_file } } ) ;
if ( $ fatal ) { $ anvil - > nice_exit ( { code = > 1 } ) ; }
}
elsif ( not - r $ source_file )
{
# Can't read the file.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0152" , variables = > { source_file = > $ source_file } } ) ;
if ( $ fatal ) { $ anvil - > nice_exit ( { code = > 1 } ) ; }
}
else
{
$ proceed = 1 ;
}
}
else
{
# Make sure the source file exists, is a file and can be read.
my $ shell_call = "
@ -246,32 +272,6 @@ fi";
}
}
}
else
{
# Local file
if ( not - e $ source_file )
{
# File doesn't exist.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0151" , variables = > { source_file = > $ source_file } } ) ;
if ( $ fatal ) { $ anvil - > nice_exit ( { code = > 1 } ) ; }
}
elsif ( not - f $ source_file )
{
# Not a file
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0153" , variables = > { source_file = > $ source_file } } ) ;
if ( $ fatal ) { $ anvil - > nice_exit ( { code = > 1 } ) ; }
}
elsif ( not - r $ source_file )
{
# Can't read the file.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0152" , variables = > { source_file = > $ source_file } } ) ;
if ( $ fatal ) { $ anvil - > nice_exit ( { code = > 1 } ) ; }
}
else
{
$ proceed = 1 ;
}
}
# Proceed?
if ( $ proceed )
@ -330,13 +330,29 @@ If it fails to write the file, an alert will be logged.
Parameters ;
= head3 mode ( required )
This is the numeric mode to set on the file . It expects four digits to cover the sticky bit , but will work with three digits .
= head3 path ( required )
This is the file or directory to change the mode on .
= head3 mode ( required )
= head3 port ( optional , default 22 )
This is the numeric mode to set on the file . It expects four digits to cover the sticky bit , but will work with three digits .
If C << target >> is set , this is the TCP port number used to connect to the remote machine .
= head3 password ( optional )
If C << target >> is set , this is the password used to log into the remote system as the C << remote_user >> . If it is not set , an attempt to connect without a password will be made ( though this will usually fail ) .
= head3 target ( optional )
If set , the file will be backed up on the target machine . This must be either an IP address or a resolvable host name .
= head3 remote_user ( optional )
If C << target >> is set , this is the user account that will be used when connecting to the remote system .
= cut
sub change_mode
@ -346,11 +362,19 @@ sub change_mode
my $ anvil = $ self - > parent ;
my $ debug = defined $ parameter - > { debug } ? $ parameter - > { debug } : 3 ;
my $ path = defined $ parameter - > { path } ? $ parameter - > { path } : "" ;
my $ mode = defined $ parameter - > { mode } ? $ parameter - > { mode } : "" ;
my $ path = defined $ parameter - > { path } ? $ parameter - > { path } : "" ;
my $ port = defined $ parameter - > { port } ? $ parameter - > { port } : "" ;
my $ password = defined $ parameter - > { password } ? $ parameter - > { password } : "" ;
my $ remote_user = defined $ parameter - > { remote_user } ? $ parameter - > { remote_user } : "root" ;
my $ target = defined $ parameter - > { target } ? $ parameter - > { target } : "" ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
mode = > $ mode ,
path = > $ path ,
port = > $ port ,
password = > $ anvil - > Log - > is_secure ( $ password ) ,
target = > $ target ,
remote_user = > $ remote_user ,
} } ) ;
my $ error = 0 ;
@ -377,14 +401,32 @@ sub change_mode
{
my $ shell_call = $ anvil - > data - > { path } { exe } { 'chmod' } . " $mode $path" ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0011" , variables = > { shell_call = > $ shell_call } } ) ;
open ( my $ file_handle , $ shell_call . " 2>&1 |" ) or $ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0014" , variables = > { shell_call = > $ shell_call , error = > $! } } ) ;
while ( <$file_handle> )
if ( $ anvil - > Network - > is_local ( { host = > $ target } ) )
{
chomp ;
my $ line = $ _ ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0017" , variables = > { line = > $ line } } ) ;
# Local call
my ( $ output , $ return_code ) = $ anvil - > System - > call ( { debug = > $ debug , shell_call = > $ shell_call } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
output = > $ output ,
return_code = > $ return_code ,
} } ) ;
}
else
{
# Remote call.
my ( $ output , $ error , $ return_code ) = $ anvil - > Remote - > call ( {
debug = > $ debug ,
shell_call = > $ shell_call ,
target = > $ target ,
port = > $ port ,
password = > $ password ,
remote_user = > $ remote_user ,
} ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
error = > $ error ,
output = > $ output ,
return_code = > $ return_code ,
} } ) ;
}
close $ file_handle ;
}
return ( 0 ) ;
@ -400,13 +442,29 @@ If it fails to write the file, an alert will be logged and 'C<< 1 >>' will be re
Parameters ;
= head3 group ( optional , default is the main group of the user running the program )
This is the group name or UID to set the path to .
= head3 path ( required )
This is the file or directory to change the mode on .
= head3 group ( optional , default is the main group of the user running the program )
= head3 port ( optional , default 22 )
This is the group name or UID to set the path to .
If C << target >> is set , this is the TCP port number used to connect to the remote machine .
= head3 password ( optional )
If C << target >> is set , this is the password used to log into the remote system as the C << remote_user >> . If it is not set , an attempt to connect without a password will be made ( though this will usually fail ) .
= head3 remote_user ( optional )
If C << target >> is set , this is the user account that will be used when connecting to the remote system .
= head3 target ( optional )
If set , the file will be backed up on the target machine . This must be either an IP address or a resolvable host name .
= head3 user ( optional , default is the user running the program )
@ -420,12 +478,20 @@ sub change_owner
my $ anvil = $ self - > parent ;
my $ debug = defined $ parameter - > { debug } ? $ parameter - > { debug } : 3 ;
my $ path = defined $ parameter - > { path } ? $ parameter - > { path } : "" ;
my $ group = defined $ parameter - > { group } ? $ parameter - > { group } : getgrgid ( $( ) ;
my $ path = defined $ parameter - > { path } ? $ parameter - > { path } : "" ;
my $ port = defined $ parameter - > { port } ? $ parameter - > { port } : "" ;
my $ password = defined $ parameter - > { password } ? $ parameter - > { password } : "" ;
my $ remote_user = defined $ parameter - > { remote_user } ? $ parameter - > { remote_user } : "root" ;
my $ target = defined $ parameter - > { target } ? $ parameter - > { target } : "" ;
my $ user = defined $ parameter - > { user } ? $ parameter - > { user } : getpwuid ( $< ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
path = > $ path ,
group = > $ group ,
path = > $ path ,
port = > $ port ,
password = > $ anvil - > Log - > is_secure ( $ password ) ,
remote_user = > $ remote_user ,
target = > $ target ,
user = > $ user ,
} } ) ;
@ -470,14 +536,32 @@ sub change_owner
{
my $ shell_call = $ anvil - > data - > { path } { exe } { 'chown' } . " " . $ string . " " . $ path ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0011" , variables = > { shell_call = > $ shell_call } } ) ;
open ( my $ file_handle , $ shell_call . " 2>&1 |" ) or $ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0014" , variables = > { shell_call = > $ shell_call , error = > $! } } ) ;
while ( <$file_handle> )
if ( $ anvil - > Network - > is_local ( { host = > $ target } ) )
{
chomp ;
my $ line = $ _ ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0017" , variables = > { line = > $ line } } ) ;
# Local call
my ( $ output , $ return_code ) = $ anvil - > System - > call ( { debug = > $ debug , shell_call = > $ shell_call } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
output = > $ output ,
return_code = > $ return_code ,
} } ) ;
}
else
{
# Remote call.
my ( $ output , $ error , $ return_code ) = $ anvil - > Remote - > call ( {
debug = > $ debug ,
shell_call = > $ shell_call ,
target = > $ target ,
port = > $ port ,
password = > $ password ,
remote_user = > $ remote_user ,
} ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
error = > $ error ,
output = > $ output ,
return_code = > $ return_code ,
} } ) ;
}
close $ file_handle ;
}
return ( $ error ) ;
@ -672,7 +756,54 @@ sub copy_file
file = > $ file ,
} } ) ;
if ( $ anvil - > Network - > is_remote ( $ target ) )
if ( $ anvil - > Network - > is_local ( { host = > $ target } ) )
{
# Copying locally
if ( not - e $ source_file )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0052" , variables = > {
method = > "copy_file" ,
source_file = > $ source_file ,
} } ) ;
return ( 1 ) ;
}
# If the target exists, abort
if ( ( - e $ target_file ) && ( not $ overwrite ) )
{
# This isn't an error.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , key = > "log_0046" , variables = > {
method = > "copy_file" ,
source_file = > $ source_file ,
target_file = > $ target_file ,
} } ) ;
return ( 1 ) ;
}
# Make sure the target directory exists and create it, if not.
if ( not - e $ directory )
{
my $ failed = $ anvil - > Storage - > make_directory ( {
debug = > $ debug ,
directory = > $ directory ,
} ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { failed = > $ failed } } ) ;
if ( $ failed )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , key = > "log_0170" , variables = > {
method = > "copy_file" ,
source_file = > $ source_file ,
target_file = > $ target_file ,
} } ) ;
return ( 1 ) ;
}
}
# Now backup the file.
my ( $ output , $ return_code ) = $ anvil - > System - > call ( { debug = > $ debug , shell_call = > $ anvil - > data - > { path } { exe } { 'cp' } . " -af " . $ source_file . " " . $ target_file } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { output = > $ output , return_code = > $ return_code } } ) ;
}
else
{
# Copying on a remote system.
my $ proceed = 1 ;
@ -775,53 +906,6 @@ fi";
} } ) ;
}
}
else
{
# Copying locally
if ( not - e $ source_file )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0052" , variables = > {
method = > "copy_file" ,
source_file = > $ source_file ,
} } ) ;
return ( 1 ) ;
}
# If the target exists, abort
if ( ( - e $ target_file ) && ( not $ overwrite ) )
{
# This isn't an error.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , key = > "log_0046" , variables = > {
method = > "copy_file" ,
source_file = > $ source_file ,
target_file = > $ target_file ,
} } ) ;
return ( 1 ) ;
}
# Make sure the target directory exists and create it, if not.
if ( not - e $ directory )
{
my $ failed = $ anvil - > Storage - > make_directory ( {
debug = > $ debug ,
directory = > $ directory ,
} ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { failed = > $ failed } } ) ;
if ( $ failed )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , key = > "log_0170" , variables = > {
method = > "copy_file" ,
source_file = > $ source_file ,
target_file = > $ target_file ,
} } ) ;
return ( 1 ) ;
}
}
# Now backup the file.
my ( $ output , $ return_code ) = $ anvil - > System - > call ( { debug = > $ debug , shell_call = > $ anvil - > data - > { path } { exe } { 'cp' } . " -af " . $ source_file . " " . $ target_file } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { output = > $ output , return_code = > $ return_code } } ) ;
}
return ( 0 ) ;
}
@ -991,7 +1075,49 @@ sub make_directory
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { working_directory = > $ working_directory } } ) ;
# Are we working locally or remotely?
if ( $ anvil - > Network - > is_remote ( $ target ) )
if ( $ anvil - > Network - > is_local ( { host = > $ target } ) )
{
# Locally.
if ( not - e $ working_directory )
{
# Directory doesn't exist, so create it.
my $ error = "" ;
my $ shell_call = $ anvil - > data - > { path } { exe } { 'mkdir' } . " " . $ working_directory ;
print $ THIS_FILE . " " . __LINE__ . "; shell_call: [" . $ shell_call . "]\n" if $ test ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0011" , variables = > { shell_call = > $ shell_call } } ) ;
open ( my $ file_handle , $ shell_call . " 2>&1 |" ) or $ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0014" , variables = > { shell_call = > $ shell_call , error = > $! } } ) ;
while ( <$file_handle> )
{
chomp ;
my $ line = $ _ ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0017" , variables = > { line = > $ line } } ) ;
$ error . = $ line . "\n" ;
}
close $ file_handle ;
print $ THIS_FILE . " " . __LINE__ . "; mode: [" . $ mode . "]\n" if $ test ;
if ( $ mode )
{
$ anvil - > Storage - > change_mode ( { debug = > $ debug , path = > $ working_directory , mode = > $ mode } ) ;
}
print $ THIS_FILE . " " . __LINE__ . "; user: [" . $ user . "], group: [" . $ group . "]\n" if $ test ;
if ( ( $ user ) or ( $ group ) )
{
$ anvil - > Storage - > change_owner ( { debug = > $ debug , path = > $ working_directory , user = > $ user , group = > $ group } ) ;
}
if ( not - e $ working_directory )
{
$ failed = 1 ;
print $ THIS_FILE . " " . __LINE__ . "; failed: [" . $ failed . "]\n" if $ test ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0168" , variables = > {
directory = > $ working_directory ,
error = > $ error ,
} } ) ;
}
}
}
else
{
# Assemble the command
my $ shell_call = "
@ -1050,48 +1176,6 @@ fi;";
} } ) ;
}
}
else
{
# Locally.
if ( not - e $ working_directory )
{
# Directory doesn't exist, so create it.
my $ error = "" ;
my $ shell_call = $ anvil - > data - > { path } { exe } { 'mkdir' } . " " . $ working_directory ;
print $ THIS_FILE . " " . __LINE__ . "; shell_call: [" . $ shell_call . "]\n" if $ test ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0011" , variables = > { shell_call = > $ shell_call } } ) ;
open ( my $ file_handle , $ shell_call . " 2>&1 |" ) or $ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0014" , variables = > { shell_call = > $ shell_call , error = > $! } } ) ;
while ( <$file_handle> )
{
chomp ;
my $ line = $ _ ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0017" , variables = > { line = > $ line } } ) ;
$ error . = $ line . "\n" ;
}
close $ file_handle ;
print $ THIS_FILE . " " . __LINE__ . "; mode: [" . $ mode . "]\n" if $ test ;
if ( $ mode )
{
$ anvil - > Storage - > change_mode ( { debug = > $ debug , path = > $ working_directory , mode = > $ mode } ) ;
}
print $ THIS_FILE . " " . __LINE__ . "; user: [" . $ user . "], group: [" . $ group . "]\n" if $ test ;
if ( ( $ user ) or ( $ group ) )
{
$ anvil - > Storage - > change_owner ( { debug = > $ debug , path = > $ working_directory , user = > $ user , group = > $ group } ) ;
}
if ( not - e $ working_directory )
{
$ failed = 1 ;
print $ THIS_FILE . " " . __LINE__ . "; failed: [" . $ failed . "]\n" if $ test ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0168" , variables = > {
directory = > $ working_directory ,
error = > $ error ,
} } ) ;
}
}
}
print $ THIS_FILE . " " . __LINE__ . "; failed: [" . $ failed . "]\n" if $ test ;
last if $ failed ;
}
@ -1200,7 +1284,54 @@ sub move_file
} } ) ;
}
if ( $ anvil - > Network - > is_remote ( $ target ) )
if ( $ anvil - > Network - > is_local ( { host = > $ target } ) )
{
# Copying locally
if ( not - e $ source_file )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0052" , variables = > {
method = > "move_file" ,
source_file = > $ source_file ,
} } ) ;
return ( 1 ) ;
}
# If the target exists, abort
if ( ( - e $ target_file ) && ( not $ overwrite ) )
{
# This isn't an error.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , key = > "log_0046" , variables = > {
method = > "move_file" ,
source_file = > $ source_file ,
target_file = > $ target_file ,
} } ) ;
return ( 1 ) ;
}
# Make sure the target directory exists and create it, if not.
if ( not - e $ directory )
{
my $ failed = $ anvil - > Storage - > make_directory ( {
debug = > $ debug ,
directory = > $ directory ,
} ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { failed = > $ failed } } ) ;
if ( $ failed )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , key = > "log_0170" , variables = > {
method = > "move_file" ,
source_file = > $ source_file ,
target_file = > $ target_file ,
} } ) ;
return ( 1 ) ;
}
}
# Now backup the file.
my ( $ output , $ return_code ) = $ anvil - > System - > call ( { debug = > $ debug , shell_call = > $ anvil - > data - > { path } { exe } { 'mv' } . " -f " . $ source_file . " " . $ target_file } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { output = > $ output , return_code = > $ return_code } } ) ;
}
else
{
# Copying on a remote system.
my $ proceed = 1 ;
@ -1267,73 +1398,16 @@ fi";
} } ) ;
return ( 1 ) ;
}
if ( $ line2 eq "target directory not found" )
{
my $ failed = $ anvil - > Storage - > make_directory ( {
debug = > $ debug ,
directory = > $ directory ,
password = > $ password ,
remote_user = > $ remote_user ,
target = > $ target ,
} ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { failed = > $ failed } } ) ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , key = > "log_0170" , variables = > {
method = > "move_file" ,
source_file = > $ source_file ,
target_file = > $ target_file ,
} } ) ;
return ( 1 ) ;
}
# Now backup the file.
my ( $ output , $ error , $ return_code ) = $ anvil - > Remote - > call ( {
debug = > $ debug ,
target = > $ target ,
user = > $ remote_user ,
password = > $ password ,
remote_user = > $ remote_user ,
shell_call = > $ anvil - > data - > { path } { exe } { mv } . " -f " . $ source_file . " " . $ target_file ,
} ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
error = > $ error ,
output = > $ output ,
} } ) ;
}
}
else
{
# Copying locally
if ( not - e $ source_file )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0052" , variables = > {
method = > "move_file" ,
source_file = > $ source_file ,
} } ) ;
return ( 1 ) ;
}
# If the target exists, abort
if ( ( - e $ target_file ) && ( not $ overwrite ) )
{
# This isn't an error.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , key = > "log_0046" , variables = > {
method = > "move_file" ,
source_file = > $ source_file ,
target_file = > $ target_file ,
} } ) ;
return ( 1 ) ;
}
# Make sure the target directory exists and create it, if not.
if ( not - e $ directory )
if ( $ line2 eq "target directory not found" )
{
my $ failed = $ anvil - > Storage - > make_directory ( {
debug = > $ debug ,
directory = > $ directory ,
password = > $ password ,
remote_user = > $ remote_user ,
target = > $ target ,
} ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { failed = > $ failed } } ) ;
if ( $ failed )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 1 , key = > "log_0170" , variables = > {
method = > "move_file" ,
source_file = > $ source_file ,
@ -1341,11 +1415,21 @@ fi";
} } ) ;
return ( 1 ) ;
}
}
# Now backup the file.
my ( $ output , $ return_code ) = $ anvil - > System - > call ( { debug = > $ debug , shell_call = > $ anvil - > data - > { path } { exe } { 'mv' } . " -f " . $ source_file . " " . $ target_file } ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { output = > $ output , return_code = > $ return_code } } ) ;
my ( $ output , $ error , $ return_code ) = $ anvil - > Remote - > call ( {
debug = > $ debug ,
target = > $ target ,
user = > $ remote_user ,
password = > $ password ,
remote_user = > $ remote_user ,
shell_call = > $ anvil - > data - > { path } { exe } { mv } . " -f " . $ source_file . " " . $ target_file ,
} ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
error = > $ error ,
output = > $ output ,
} } ) ;
}
}
return ( 0 ) ;
@ -1567,8 +1651,52 @@ sub read_file
return ( "!!error!!" ) ;
}
### NOTE: This is called by 'is_local', so it pre-sets 'is_local' to avoid a deep recursion.
# Reading locally or remote?
if ( $ anvil - > Network - > is_remote ( $ target ) )
if ( $ anvil - > Network - > is_local ( { host = > $ target } ) )
{
# Local
if ( not - e $ file )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0021" , variables = > { file = > $ file } } ) ;
return ( "!!error!!" ) ;
}
elsif ( not - r $ file )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0022" , variables = > { file = > $ file } } ) ;
return ( "!!error!!" ) ;
}
# If I've read this before, don't read it again.
if ( ( exists $ anvil - > data - > { cache } { file } { $ file } ) && ( not $ force_read ) )
{
# Use the cache
$ body = $ anvil - > data - > { cache } { file } { $ file } ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { body = > $ body } } ) ;
}
else
{
# Read from storage.
my $ shell_call = $ file ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0012" , variables = > { shell_call = > $ shell_call } } ) ;
open ( my $ file_handle , "<" , $ shell_call ) or $ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0015" , variables = > { shell_call = > $ shell_call , error = > $! } } ) ;
while ( <$file_handle> )
{
### NOTE: Don't chop this, we want to record exactly what we read
my $ line = $ _ ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0023" , variables = > { line = > $ line } } ) ;
$ body . = $ line ;
}
close $ file_handle ;
if ( $ cache )
{
$ anvil - > data - > { cache } { file } { $ file } = $ body ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { "cache::file::${file}" = > $ anvil - > data - > { cache } { file } { $ file } } } ) ;
}
}
}
else
{
# Remote. Make sure the passed file is a full path and file name.
if ( $ file !~ /^\/\w/ )
@ -1652,49 +1780,6 @@ sub read_file
}
}
}
else
{
# Local
if ( not - e $ file )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0021" , variables = > { file = > $ file } } ) ;
return ( "!!error!!" ) ;
}
elsif ( not - r $ file )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0022" , variables = > { file = > $ file } } ) ;
return ( "!!error!!" ) ;
}
# If I've read this before, don't read it again.
if ( ( exists $ anvil - > data - > { cache } { file } { $ file } ) && ( not $ force_read ) )
{
# Use the cache
$ body = $ anvil - > data - > { cache } { file } { $ file } ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { body = > $ body } } ) ;
}
else
{
# Read from storage.
my $ shell_call = $ file ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0012" , variables = > { shell_call = > $ shell_call } } ) ;
open ( my $ file_handle , "<" , $ shell_call ) or $ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0015" , variables = > { shell_call = > $ shell_call , error = > $! } } ) ;
while ( <$file_handle> )
{
### NOTE: Don't chop this, we want to record exactly what we read
my $ line = $ _ ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , key = > "log_0023" , variables = > { line = > $ line } } ) ;
$ body . = $ line ;
}
close $ file_handle ;
if ( $ cache )
{
$ anvil - > data - > { cache } { file } { $ file } = $ body ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { "cache::file::${file}" = > $ anvil - > data - > { cache } { file } { $ file } } } ) ;
}
}
}
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { body = > $ body } } ) ;
return ( $ body ) ;
@ -1920,7 +2005,7 @@ sub rsync
# If local, call rsync directly. If remote, setup the rsync wrapper
my $ wrapper_script = "" ;
my $ shell_call = $ anvil - > data - > { path } { exe } { rsync } . " " . $ switches . " " . $ source . " " . $ destination ;
if ( $ anvil - > Network - > is_remote ( $ target ) )
if ( not $ anvil - > Network - > is_local ( { host = > $ target } ) )
{
# If we didn't get a port, but the target is pre-configured for a port, use it.
if ( ( not $ parameter - > { port } ) && ( $ anvil - > data - > { hosts } { $ target } { port } ) )
@ -2421,20 +2506,20 @@ sub update_config
# Did we see the variable?
if ( not $ seen )
{
if ( $ anvil - > Network - > is_remote ( $ target ) )
if ( $ anvil - > Network - > is_local ( { host = > $ target } ) )
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0175 " , variables = > {
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0174 " , variables = > {
variable = > $ variable ,
file = > $ anvil - > data - > { path } { configs } { 'anvil.conf' } ,
target = > $ target ,
} } ) ;
return ( 1 ) ;
}
else
{
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0174 " , variables = > {
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0175 " , variables = > {
variable = > $ variable ,
file = > $ anvil - > data - > { path } { configs } { 'anvil.conf' } ,
target = > $ target ,
} } ) ;
return ( 1 ) ;
}
@ -2765,7 +2850,78 @@ sub write_file
} } ) ;
# Now, are we writing locally or on a remote system?
if ( $ anvil - > Network - > is_remote ( $ target ) )
if ( $ anvil - > Network - > is_local ( { host = > $ target } ) )
{
# Local
if ( - e $ file )
{
if ( not $ overwrite )
{
# Nope.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0040" , variables = > { file = > $ file } } ) ;
$ error = 1 ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { error = > $ error } } ) ;
}
if ( $ backup )
{
# Back it up.
my $ backup_file = $ anvil - > Storage - > backup ( {
debug = > $ debug ,
file = > $ file ,
} ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { backup_file = > $ backup_file } } ) ;
}
}
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { error = > $ error } } ) ;
if ( not $ error )
{
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { directory = > $ directory } } ) ;
if ( not - e $ directory )
{
# Don't pass the mode as the file's mode is likely not executable.
$ anvil - > Storage - > make_directory ( {
debug = > $ debug ,
directory = > $ directory ,
group = > $ group ,
user = > $ user ,
} ) ;
}
# If 'secure' is set, the file will probably contain sensitive data so touch the file and set
# the mode before writing it.
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { secure = > $ secure } } ) ;
if ( $ secure )
{
$ anvil - > System - > call ( { debug = > $ debug , shell_call = > $ anvil - > data - > { path } { exe } { touch } . " " . $ file } ) ;
$ anvil - > Storage - > change_mode ( { debug = > $ debug , path = > $ file , mode = > $ mode } ) ;
}
# Now write the file.
my $ shell_call = $ file ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , secure = > 0 , key = > "log_0013" , variables = > { shell_call = > $ shell_call } } ) ;
open ( my $ file_handle , ">" , $ shell_call ) or $ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , secure = > $ secure , priority = > "err" , key = > "log_0016" , variables = > { shell_call = > $ shell_call , error = > $! } } ) ;
#open (my $file_handle, ">", $shell_call) or die "Failed to write: [$shell_call], error was: [".$!."]\n";;
print $ file_handle $ body ;
close $ file_handle ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { mode = > $ mode } } ) ;
if ( $ mode )
{
$ anvil - > Storage - > change_mode ( { debug = > $ debug , path = > $ file , mode = > $ mode } ) ;
}
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
user = > $ user ,
group = > $ group ,
} } ) ;
if ( ( $ user ) or ( $ group ) )
{
$ anvil - > Storage - > change_owner ( { debug = > $ debug , path = > $ file , user = > $ user , group = > $ group } ) ;
}
}
}
else
{
# If we didn't get a port, but the target is pre-configured for a port, use it.
if ( ( not $ parameter - > { port } ) && ( $ anvil - > data - > { hosts } { $ target } { port } ) )
@ -2909,77 +3065,6 @@ fi";
}
}
}
else
{
# Local
if ( - e $ file )
{
if ( not $ overwrite )
{
# Nope.
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , priority = > "err" , key = > "log_0040" , variables = > { file = > $ file } } ) ;
$ error = 1 ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { error = > $ error } } ) ;
}
if ( $ backup )
{
# Back it up.
my $ backup_file = $ anvil - > Storage - > backup ( {
debug = > $ debug ,
file = > $ file ,
} ) ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { backup_file = > $ backup_file } } ) ;
}
}
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { error = > $ error } } ) ;
if ( not $ error )
{
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { directory = > $ directory } } ) ;
if ( not - e $ directory )
{
# Don't pass the mode as the file's mode is likely not executable.
$ anvil - > Storage - > make_directory ( {
debug = > $ debug ,
directory = > $ directory ,
group = > $ group ,
user = > $ user ,
} ) ;
}
# If 'secure' is set, the file will probably contain sensitive data so touch the file and set
# the mode before writing it.
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { secure = > $ secure } } ) ;
if ( $ secure )
{
$ anvil - > System - > call ( { debug = > $ debug , shell_call = > $ anvil - > data - > { path } { exe } { touch } . " " . $ file } ) ;
$ anvil - > Storage - > change_mode ( { debug = > $ debug , path = > $ file , mode = > $ mode } ) ;
}
# Now write the file.
my $ shell_call = $ file ;
$ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , secure = > 0 , key = > "log_0013" , variables = > { shell_call = > $ shell_call } } ) ;
open ( my $ file_handle , ">" , $ shell_call ) or $ anvil - > Log - > entry ( { source = > $ THIS_FILE , line = > __LINE__ , level = > 0 , secure = > $ secure , priority = > "err" , key = > "log_0016" , variables = > { shell_call = > $ shell_call , error = > $! } } ) ;
#open (my $file_handle, ">", $shell_call) or die "Failed to write: [$shell_call], error was: [".$!."]\n";;
print $ file_handle $ body ;
close $ file_handle ;
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { mode = > $ mode } } ) ;
if ( $ mode )
{
$ anvil - > Storage - > change_mode ( { debug = > $ debug , path = > $ file , mode = > $ mode } ) ;
}
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > {
user = > $ user ,
group = > $ group ,
} } ) ;
if ( ( $ user ) or ( $ group ) )
{
$ anvil - > Storage - > change_owner ( { debug = > $ debug , path = > $ file , user = > $ user , group = > $ group } ) ;
}
}
}
$ anvil - > Log - > variables ( { source = > $ THIS_FILE , line = > __LINE__ , level = > $ debug , list = > { error = > $ error } } ) ;
return ( $ error ) ;
Digimer
5 years ago