* Updated Database->get_host_from_uuid() to cache results.
* Fixed a bug in Database->get_storage_group_data where a DELETE wasn't deleting from the history schema as well.
* In Database->resync_databases(), references to the old 'host_uuid' that we used to use to resync just the local host's data was removed. Added also a check where two or more entries in a given history schema had the same modified_date and, when found, the newest entry is preserved and the rest are deleted. Before this, a resync where two+ records had the same modified_time would only sync the last record, leaving a mismatch in history schema entries triggering repeated resyncs.
* Fixed a bug in Email->send_alerts() where the 'alerts' table was being updated without a modified_date being set.
* Fixed a bug in System->test_ipmi() where the 'hosts' table was being updated without a modified_date being set.
* Updated scan-network to clear up old deleted ip_addresses, bonds and bridges. Also fixed bugs where public schema records were being deleted without history records being deleted.
* Updated anvil-update-states to fix bugs where DELETEs were happening without setting the modified_date.
Signed-off-by: Digimer <digimer@alteeve.ca>
my$query="INSERT INTO public.$table (".$uuid_column.", ".$columns."modified_date) VALUES (".$anvil->Database->quote($row_uuid).", ".$values.$anvil->Database->quote($modified_date)."::timestamp AT TIME ZONE 'UTC');";
my$query="INSERT INTO public.".$table." (".$uuid_column.", ".$columns."modified_date) VALUES (".$anvil->Database->quote($row_uuid).", ".$values.$anvil->Database->quote($modified_date)."::timestamp AT TIME ZONE 'UTC');";
if($host_column)
{
# Add the host column.
$query="INSERT INTO public.$table ($host_column, $uuid_column, ".$columns."modified_date) VALUES (".$anvil->Database->quote($anvil->data->{sys}{host_uuid}).", ".$anvil->Database->quote($row_uuid).", ".$values.$anvil->Database->quote($modified_date)."::timestamp AT TIME ZONE 'UTC');";
### NOTE: After an archive operationg, a record can
### NOTE: After an archive operationg, a record can
@ -16359,11 +16429,6 @@ sub resync_databases
}});
}});
my$query="INSERT INTO history.$table (".$uuid_column.", ".$columns."modified_date) VALUES (".$anvil->Database->quote($row_uuid).", ".$values.$anvil->Database->quote($modified_date)."::timestamp AT TIME ZONE 'UTC');";
my$query="INSERT INTO history.$table (".$uuid_column.", ".$columns."modified_date) VALUES (".$anvil->Database->quote($row_uuid).", ".$values.$anvil->Database->quote($modified_date)."::timestamp AT TIME ZONE 'UTC');";
if($host_column)
{
# Add the host column.
$query="INSERT INTO history.$table ($host_column, $uuid_column, ".$columns."modified_date) VALUES (".$anvil->Database->quote($anvil->data->{sys}{host_uuid}).", ".$anvil->Database->quote($row_uuid).", ".$values.$anvil->Database->quote($modified_date)."::timestamp AT TIME ZONE 'UTC');";
### Get the host_uuid column (we can get this from whatever DB we're reading from.
# Some tables, like 'servers', has a host_uuid column, but it's not used to restrict data to
# a host, but instead show which host a movable resource is on. This prevents us from using
# the column by accident.
my$host_column="";
if(($tablene"servers")&&
($tablene"jobs"))
{
# Does this table have a '*_host_uuid' column?
my$test_columns=[$table."_host_uuid"];
if($table=~ /^(.*)s$/)
{
push@{$test_columns},$1."_host_uuid";
}
if($table=~ /^(.*)es$/)
{
push@{$test_columns},$1."_host_uuid";
}
foreachmy$test_column(@{$test_columns})
{
my$query="SELECT COUNT(*) FROM information_schema.columns WHERE table_schema = 'public' AND column_name = ".$anvil->Database->quote($test_column)." AND table_name = ".$anvil->Database->quote($table).";";
$query="SELECT COUNT(*) FROM information_schema.tables WHERE table_type = 'BASE TABLE' AND table_schema = 'history' AND table_name = ".$anvil->Database->quote($table).";";
$query="SELECT COUNT(*) FROM information_schema.tables WHERE table_type = 'BASE TABLE' AND table_schema = 'history' AND table_name = ".$anvil->Database->quote($table).";";
my$query="UPDATE hosts SET host_ipmi = ".$anvil->Database->quote($shell_call)." WHERE host_uuid = ".$anvil->Database->quote($anvil->Get->host_uuid).";";
su - postgres -c "createuser --no-superuser --createdb --no-createrole admin"
su - postgres -c "psql template1 -c \"ALTER ROLE postgres WITH PASSWORD 'Initial1';\""
su - postgres -c "psql template1 -c \"ALTER ROLE admin WITH PASSWORD 'Initial1';\""
# If there was a previous DB
su - postgres -c "dropdb client"
# Copy and load
cp /path/to/client_anvil.out /tmp/anvil.out
su - postgres -c "createdb --owner admin client" && su - postgres -c "psql client < /tmp/anvil.out" && su - postgres -c "psql client"
Changes made using tools such as nmcli do not require a reload but do require the associated interface to be put down and then up again. That can be done by using commands in the following format:
Changes made using tools such as nmcli do not require a reload but do require the associated interface to be put down and then up again. That can be done by using commands in the following format:
@ -216,5 +216,8 @@ This mode is NOT supported by the Anvil! Intelligent Availability™ platform!
<keyname="scan_network_log_0001">Aging out RX and TX data under: [#!variable!records!#] interfaces. These have 1 or more historical records older than: [#!variable!age!#] hours old from the database host: [#!variable!host!#].</key>
<keyname="scan_network_log_0001">Aging out RX and TX data under: [#!variable!records!#] interfaces. These have 1 or more historical records older than: [#!variable!age!#] hours old from the database host: [#!variable!host!#].</key>
<keyname="scan_network_log_0002">The old network interface: [#!variable!name!#] with the MAC address: [#!variable!mac!#] was marked as deleted more than: [#!variable!age!#] hours ago. Purging it from the database.</key>
<keyname="scan_network_log_0002">The old network interface: [#!variable!name!#] with the MAC address: [#!variable!mac!#] was marked as deleted more than: [#!variable!age!#] hours ago. Purging it from the database.</key>
<keyname="scan_network_log_0003">The old bond: [#!variable!name!#] was marked as deleted more than: [#!variable!age!#] hours ago. Purging it from the database.</key>
<keyname="scan_network_log_0004">The old bridge: [#!variable!name!#] was marked as deleted more than: [#!variable!age!#] hours ago. Purging it from the database.</key>
<keyname="scan_network_log_0005">The old IP address: [#!variable!ip!#] was marked as deleted more than: [#!variable!age!#] hours ago. Purging it from the database.</key>
<keyname="error_0360">Unable to find the Anvil! information for the Anvil! UUID: [#!variable!anvil_uuid!#].</key>
<keyname="error_0360">Unable to find the Anvil! information for the Anvil! UUID: [#!variable!anvil_uuid!#].</key>
<keyname="error_0361">Unable to find the DRBD config from either node in the Anvil! with the Anvil! UUID: [#!variable!anvil_uuid!#]. Has scan_drbd (as part of scancore) run on either nodes?</key>
<keyname="error_0361">Unable to find the DRBD config from either node in the Anvil! with the Anvil! UUID: [#!variable!anvil_uuid!#]. Has scan_drbd (as part of scancore) run on either nodes?</key>
<keyname="error_0362"><![CDATA[The level: [#!variable!level!#] is invalid. Please use '--level <critical,warning,notice,info>' to specify the alert level of the test message.]]></key>
<keyname="error_0362"><![CDATA[The level: [#!variable!level!#] is invalid. Please use '--level <critical,warning,notice,info>' to specify the alert level of the test message.]]></key>
<keyname="error_0363">There are two or more entries on the host: [#!variable!host!#] in the history table: [#!variable!table!#]! The duplicate modidied_date and column UUID are: [#!variable!key!#] (time is UTC), and the query that exposed the dupplicate was: [#!variable!query!#]. This is likely caused by two database writes where the 'modified_date' wasn't updated between writes.</key>
<!-- Files templates -->
<!-- Files templates -->
<!-- NOTE: Translating these files requires an understanding of which lines are translatable -->
<!-- NOTE: Translating these files requires an understanding of which lines are translatable -->
# Remove it from the hash so we don't add it to the .json and .xml files.
# Remove it from the hash so we don't add it to the .json and .xml files.
@ -997,8 +1012,16 @@ ORDER BY
if ($anvil->data->{network_interfaces}{$network_interface_uuid}{network_interface_operational} ne "DELETED")
if ($anvil->data->{network_interfaces}{$network_interface_uuid}{network_interface_operational} ne "DELETED")
{
{
# Mark it as deleted.
# Mark it as deleted.
my $query = "UPDATE network_interfaces SET network_interface_operational = 'DELETED' WHERE network_interface_uuid = ".$anvil->Database->quote($network_interface_uuid).";";
Digimer
3 years ago