ThisistheAnvil!inwhichwe're looking for the next free resources. It'srequired,butgenerallyitdoesn'tneedtobespecifiedaswecanfinditviaC<<Cluster->get_anvil_uuid()>>.
ThisistheAnvil!inwhichwe're looking for the next free resources. It'srequired,butgenerallyitdoesn'tneedtobespecifiedaswecanfinditviaC<<Cluster->get_anvil_uuid()>>.
@ -454,6 +454,53 @@ Failed to parse the XML in the new definition file. The error was:
Giving up.
Giving up.
</key>
</key>
<keyname="error_0332">This must be run on a node active in the cluster hosting the server being managed. Exiting.</key>
<keyname="error_0333">This Anvil! does not seem to have a DR host. Exiting.</key>
<keyname="error_0334">Failed to find an IP we can access the DR host: [#!variable!host_name!#]. Has it been configured? Is it running? Exiting.</key>
<keyname="error_0335">Failed to access the DR host: [#!variable!host_name!#] using the IP: [#!variable!ip_address!#]. Is it running? Exiting.</key>
<keyname="error_0336">Failed to parse the CIB. Is this node in the cluster? Exiting.</key>
<keyname="error_0337">We're not a full member of the cluster yet. Please try again once we're fully in. Exiting.</key>
<keyname="error_0338">We can't setup a server to be protected unless both nodes are up, and the peer isn't at this time. Exiting.</key>
<keyname="error_0339">We can't remove a server from DR unless both nodes are up, and the peer isn't at this time. Exiting.</key>
<keyname="error_0340"><![CDATA[Please specify the server to manager using '--server <name or uuid>'. Exiting.]]></key>
<keyname="error_0341">Failed to find the server: [#!variable!server!#] by name or UUID? Exiting.</key>
<keyname="error_0342">The protocol: [#!variable!protocol!#] is invalid. Please use '--help' for more information.</key>
<keyname="error_0343">The DR host: [#!variable!host_name!#] doesn't appear to be storage group: [#!variable!storage_group!#]. Unable to proceed.</key>
<keyname="error_0344">We need: [#!variable!space_needed!# (#!variables!space_needed_bytes!# Bytes)] from the storage group: [#!variable!storage_group!#], but only: [#!variables!space_on_dr!# (#!variable!space_on_dr_bytes!# bytes)] is available on DR. Unable to proceed.</key>
<keyname="error_0345">[ Error ] - The check appears to have failed. Expected a return code of '0', but got: [#!variable!return_code!#]
The output, if any, was
====
#!variable!output!#
====
</key>
<keyname="error_0346">- Restoring the old config now.</key>
<keyname="error_0347">- The problematic new config has been saved as: [#!variable!file!#].</key>
<keyname="error_0348">- The old config has been restored. Exiting.</key>
<keyname="error_0349">- The logical volume: [#!variable!lv_path!#] creation failed. Unable to proceed.</key>
<keyname="error_0350">Only the root user can load a database file and start the database.</key>
<keyname="error_0351">[ Error ] - The 'pg_dump' call to backup the database failed. Expected a return code of '0', but got: [#!variable!return_code!#].
Full command called: [#!variable!shell_call!#]
The output, if any, was
====
#!variable!output!#
====
</key>
<keyname="error_0352">Only the root user can backup a database.</key>
<keyname="error_0353">[ Error ] - The 'dropdb' call to drop the database failed. Expected a return code of '0', but got: [#!variable!return_code!#].
Full command called: [#!variable!shell_call!#]
The output, if any, was
====
#!variable!output!#
====
</key>
<keyname="error_0354">[ Error ] - The 'createdb' call to create the database failed. Expected a return code of '0', but got: [#!variable!return_code!#].
Full command called: [#!variable!shell_call!#]
The output, if any, was;
====
#!variable!output!#
====
</key>
<keyname="error_0355">Failed to load the database file: [#!variable!file!#]. Deleting it so it's not considered in the next load attempt.</key>
<!-- Files templates -->
<!-- Files templates -->
<!-- NOTE: Translating these files requires an understanding of which lines are translatable -->
<!-- NOTE: Translating these files requires an understanding of which lines are translatable -->
@ -693,6 +740,41 @@ sys::manage::firewall = 1
# This is the "short list" of servers shown when provisioning a new server. To see the full list of options,
# This is the "short list" of servers shown when provisioning a new server. To see the full list of options,
# run '/usr/bin/osinfo-query os' on any machine in the Anvil!.
# run '/usr/bin/osinfo-query os' on any machine in the Anvil!.
# The variable bit rate caps at 100 MiB/sec, setting this changes the maximum
# variable rate.
c-max-rate #!variable!c-rate-maximum!#M;
}
net {
protocol #!variable!protocol!#;
fencing #!variable!fencing!#;
}
}
]]></key>
<keyname="file_0006"><![CDATA[# Resource for #!variable!server!#
resource #!variable!server!# {
#!variable!hosts!#
#!variable!connections!#
}
]]></key>
]]></key>
<!-- Table headers -->
<!-- Table headers -->
@ -1143,13 +1225,48 @@ It should be provisioned in the next minute or two.</key>
<keyname="job_0349">Loading the new corosync config exited with return code: [#!variable!return_code!#] and output: [#!variable!output!#]</key>
<keyname="job_0349">Loading the new corosync config exited with return code: [#!variable!return_code!#] and output: [#!variable!output!#]</key>
<keyname="job_0350">Manage VNC Pipes</key>
<keyname="job_0350">Manage VNC Pipes</key>
<keyname="job_0351">Perform VNC pipe operation [#!variable!operation!#] for server UUID [#!variable!server_uuid!#] from host UUID [#!variable!host_uuid!#].</key>
<keyname="job_0351">Perform VNC pipe operation [#!variable!operation!#] for server UUID [#!variable!server_uuid!#] from host UUID [#!variable!host_uuid!#].</key>
<keyname="job_0352">Manage a server menu:</key>
<keyname="job_0352">Manage a server menu:</key>
<keyname="job_0353">* Please enter the name of the server you want to manage</key>
<keyname="job_0353">* Please enter the name of the server you want to manage</key>
<keyname="job_0354">-=] Servers available to manage on the Anvil! [#!variable!anvil_name!#] [=-</key>
<keyname="job_0354">-=] Servers available to manage on the Anvil! [#!variable!anvil_name!#] [=-</key>
<keyname="job_0355">-=] Managing the server: [#!variable!server_name!#] on the Anvil!: [#!variable!anvil_name!#]</key>
<keyname="job_0355">-=] Managing the server: [#!variable!server_name!#] on the Anvil!: [#!variable!anvil_name!#]</key>
<keyname="job_0356">Get Server VM Screenshot</key>
<keyname="job_0356">Get Server VM Screenshot</key>
<keyname="job_0357">Fetch a screenshot of the specified server VM and represent it as a Base64 string.</key>
<keyname="job_0357">Fetch a screenshot of the specified server VM and represent it as a Base64 string.</key>
<keyname="job_0358">Running sanity checks.</key>
<keyname="job_0359">Sanity checks complete!</key>
<keyname="job_0360">Beginning to protect the server: [#!variable!server!#]!</key>
<keyname="job_0361">Verified that there is enough space on DR to proceed.
* The connection protocol will be: ..... [#!variable!protocol!#]
* Node 1 to DR will use TCP port: ...... [#!variable!node1_to_dr_port!#]
* Node 2 to DR will use TCP port: ...... [#!variable!node2_to_dr_port!#]
* We will update the DRBD resource file: [#!variable!config_file!#]
@ -1229,7 +1346,7 @@ Connecting to Database with configuration ID: [#!variable!uuid!#]
<keyname="log_0061"><![CDATA[[ Error ] - The method Get->users_home() was asked to find the home directory for the user: [#!variable!user!#], but was unable to do so.]]></key>
<keyname="log_0061"><![CDATA[[ Error ] - The method Get->users_home() was asked to find the home directory for the user: [#!variable!user!#], but was unable to do so.]]></key>
<keyname="log_0062">SSH session opened without a password to: [#!variable!target!#].</key>
<keyname="log_0062">SSH session opened without a password to: [#!variable!target!#].</key>
<keyname="log_0063"><![CDATA[The database: [#!variable!host!# -> #!variable!name!#] with the UUID: [#!variable!uuid!#] did not respond to pings and 'database::#!variable!uuid!#::ping' is not set to '0' in '#!data!path::configs::anvil.conf!#', skipping it.]]></key>
<keyname="log_0063"><![CDATA[The database: [#!variable!host!# -> #!variable!name!#] with the UUID: [#!variable!uuid!#] did not respond to pings and 'database::#!variable!uuid!#::ping' is not set to '0' in '#!data!path::configs::anvil.conf!#', skipping it.]]></key>
<keyname="log_0064">[ Warning ] - The database: [#!variable!name!#] on host: [#!variable!host!#] with UUID: [#!variable!uuid!#] can not be used, skipping it.</key>
<keyname="log_0064">[ Note ] - The database: [#!variable!name!#] on host: [#!variable!host!#] with UUID: [#!variable!uuid!#] is not available, skipping it.</key>
<keyname="log_0065">
<keyname="log_0065">
The database connection error was:
The database connection error was:
----------
----------
@ -1900,6 +2017,20 @@ The file: [#!variable!file!#] needs to be updated. The difference is:
<keyname="log_0646">#!variable!program!# is disabled in anvil.conf. and '--force' was not used. Exiting.</key>
<keyname="log_0646">#!variable!program!# is disabled in anvil.conf. and '--force' was not used. Exiting.</key>
<keyname="log_0647">[ Note ] - The network interface: [#!variable!name!#] with 'network_interface_uuid': [#!variable!uuid!#] is a duplicate, removing it from the database(s).</key>
<keyname="log_0647">[ Note ] - The network interface: [#!variable!name!#] with 'network_interface_uuid': [#!variable!uuid!#] is a duplicate, removing it from the database(s).</key>
<keyname="log_0648">[ Note ] - Managing /etc/hosts has been disabled.</key>
<keyname="log_0648">[ Note ] - Managing /etc/hosts has been disabled.</key>
<keyname="log_0649">[ Note ] - The Anvil!: [#!variable!anvil_name!#]'s storage group: [#!variable!storage_group!#] didn't have an entry for the host: [#!variable!host_name!#]. The volume group: [#!variable!vg_internal_uuid!#] is a close fit and not in another storage group, so adding it to this storage group now.</key>
<keyname="log_0650">[ Note ] - We're a Striker and we did not connect to a peer's database. Will check now if we can load a recent backup, then start postgres locally (with or without a load).</key>
<keyname="log_0651">Evaluating the dump file: [#!variable!full_path!#].</key>
<keyname="log_0652">The database host UUID: [#!variable!host_uuid!#] is not configured here, ignoring: [#!variable!full_path!#].</key>
<keyname="log_0653">We created the database dump file: [#!variable!full_path!#], will compare it's modidified time to other dumps we may find.</key>
<keyname="log_0654">The database was dumped to: [#!variable!file!#] in: [#!variable!took!#] second(s). The size of the dump file is: [#!variable!size!#] (#!variable!size_bytes) bytes).</key>
<keyname="log_0655">The database was loaded successfull from the file: [#!variable!file!#] in: [#!variable!took!#] second(s)!</key>
<keyname="log_0656">No databases were available, so we will become primary after loading: [#!variable!file!#], which is: [#!variable!size!#] (#!variable!size_bytes!# bytes). Please be patient, this could take a moment.</key>
<keyname="log_0657">The database was loaded, clear it and other DB dumps out now so that they don't get reloaded again in the future.</key>
<keyname="log_0658">Sync'ed the file: [#!variable!file!#] to the peer Striker: [#!variable!host_name!#]. The sync took: [#!variable!took!#] seconds, and the file was: [#!variable!size!#] (#!variable!size_bytes!# bytes).</key>
<keyname="log_0659">We're going to shut down our database. Creating a backup first.</key>
<keyname="log_0660">Stopped the postgresql daemon as a peer is currently primary.</key>
<keyname="log_0661">Our most recent database dump is newer than any from our peers. As such, we'll just start the database without a load.</key>
<keyname="log_0662">Retrying to connect to the database.</key>
<!-- Messages for users (less technical than log entries), though sometimes used for logs, too. -->
<!-- Messages for users (less technical than log entries), though sometimes used for logs, too. -->
<keyname="message_0001">The host name: [#!variable!target!#] does not resolve to an IP address.</key>
<keyname="message_0001">The host name: [#!variable!target!#] does not resolve to an IP address.</key>
@ -2261,7 +2392,8 @@ Are you sure that you want to delete the server: [#!variable!server_name!#]? [Ty
<keyname="message_0263">Preparing to get server VM screenshot.</key>
<keyname="message_0263">Preparing to get server VM screenshot.</key>
<keyname="message_0264">Finished getting server VM screenshot.</key>
<keyname="message_0264">Finished getting server VM screenshot.</key>
<keyname="message_0265">Failed to get server VM screenshot; got non-zero return code.</key>
<keyname="message_0265">Failed to get server VM screenshot; got non-zero return code.</key>
<keyname="message_0266">Finished attempting to get server VM screenshot; no operations happened because requirements not met.</key>
<keyname="message_0266">Finished attempting to get server VM screenshot; no operations happened because requirements not met.</key>>>> master
<keyname="message_0267">Preparing to manage DR for a server.</key>
<!-- Success messages shown to the user -->
<!-- Success messages shown to the user -->
<keyname="ok_0001">Saved the mail server information successfully!</key>
<keyname="ok_0001">Saved the mail server information successfully!</key>
@ -2922,6 +3054,7 @@ The error was:
We will sleep a bit and try again.
We will sleep a bit and try again.
</key>
</key>
<keyname="warning_0130">[ Warning ] - The storage group: [#!variable!storage_group_name!#] had the host: [#!variable!host_name!#] as a member. This host is not a member (anymore?) of the Anvil!: [#!variable!anvil_name!#]. Removing it from the storage group now.</key>
<!-- The entries below here are not sequential, but use a key to find the entry. -->
<!-- The entries below here are not sequential, but use a key to find the entry. -->
<!-- Run 'striker-parse-os-list to find new entries. -->
<!-- Run 'striker-parse-os-list to find new entries. -->
digimer-bot
3 years ago
committed by
GitHub