* Added 'sys::database::failed_connection_log_level' to allow silencing of log messages when a Striker peer database is not available.
* Started updating the .spec for the new release to add supported packages needed for PXE/dhcp/tftpboot.
* Added to repo tftpboot files as pulling them out of the packages and moving them into the right place relative to the modest size of adding them directly to our source wasn't justified.
* Created the still very very early 'tools/anvil-manage-firewall' tool.
Signed-off-by: Digimer <digimer@alteeve.ca>
<description>Back-Channel Network #1 - Used for all inter-machine communication in the Anvil!, as well as communication for foundation pack devices. Should be VLAN-isolated from the IFN and, thus, trusted.</description>
<description>Internet/Intranet-Facing Network #1 - Used for all client/user facing traffic. Likely connected to a semi-trusted network only.</description>
<description>Storage Network #1 - Used for DRBD communication between nodes and DR hosts. Should be VLAN-isolated from the IFN and, thus, trusted.</description>
# Command section – Refer to Chapter 2 for a list of kickstart options. You must include the required options.
### NOTE: The %packages, %pre, %pre-install, %post, %onerror, and %traceback sections are all required to be closed with %end
# Section 2
# The %packages section – Refer to Chapter 3 for details.
# Section 3:
# The %pre, %pre-install, %post, %onerror, and %traceback sections – These sections can be in any order and are not required. Refer to Chapter 4, Chapter 5, and Chapter 6 for details.
====
0 root@pulsar:/var/lib/libvirt/images# dev_PATH=$(udevadm info /dev/sdb | grep -e ID_PATH=)
0 root@pulsar:/var/lib/libvirt/images# if [[ $dev_PATH == *"usb"* ]]; then echo "USB drive"; elif [[ $dev_PATH == *"nvme"* ]]; then echo "NVMe drive"; elif [[ $dev_PATH == *"ata"* ]]; then echo "SATA drive"; elif [[ $dev_PATH == *"scsi"* ]]; then echo "SCSI drive"; fi
USB drive
0 root@pulsar:/var/lib/libvirt/images# dev_PATH=$(udevadm info /dev/sda | grep -e ID_PATH=)
0 root@pulsar:/var/lib/libvirt/images# if [[ $dev_PATH == *"usb"* ]]; then echo "USB drive"; elif [[ $dev_PATH == *"nvme"* ]]; then echo "NVMe drive"; elif [[ $dev_PATH == *"ata"* ]]; then echo "SATA drive"; elif [[ $dev_PATH == *"scsi"* ]]; then echo "SCSI drive"; fi
SATA drive
0 root@pulsar:/var/lib/libvirt/images# dev_PATH=$(udevadm info /dev/nvme0n1 | grep -e ID_PATH=)
0 root@pulsar:/var/lib/libvirt/images# if [[ $dev_PATH == *"usb"* ]]; then echo "USB drive"; elif [[ $dev_PATH == *"nvme"* ]]; then echo "NVMe drive"; elif [[ $dev_PATH == *"ata"* ]]; then echo "SATA drive"; elif [[ $dev_PATH == *"scsi"* ]]; then echo "SCSI drive"; fi
NVMe drive
[root@localhost ~]# dev_PATH=$(udevadm info /dev/sda | grep -e ID_PATH=)
[root@localhost ~]# if [[ $dev_PATH == *"usb"* ]]; then echo "USB drive"; elif [[ $dev_PATH == *"nvme"* ]]; then echo "NVMe drive"; elif [[ $dev_PATH == *"ata"* ]]; then echo "SATA drive"; elif [[ $dev_PATH == *"scsi"* ]]; then echo "SCSI drive"; fi
<keyname="log_0127">Firewalld was not running, re-enabling it. If you do not want this behaviour, please set 'sys::daemons::restart_firewalld = 0' in the configuration file for this program (or in 'tools.conf').</key>
<keyname="log_0127">Firewalld was not running, re-enabling it. If you do not want this behaviour, please set 'sys::daemons::restart_firewalld = 0' in: [#!data!path::configs::anvil.conf!#].</key>
<keyname="log_0128">Firewalld was not running, and 'sys::daemons::restart_firewalld = 0' is set. NOT starting it.</key>
<keyname="log_0129"><![CDATA[<all>]]></key><!-- Used when logging DB writes to all DBs -->
<keyname="log_0130"><![CDATA[[ Error ] - The method: [#!variable!method!#] was called and the parameter: [#!variable!parameter!#] was passed an invalid UUID: [#!variable!uuid!#].]]></key>
Digimer
6 years ago