Local modifications to ClusterLabs/Anvil by Alteeve
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

3883 lines
187 KiB

package Anvil::Tools::DRBD;
#
# This module contains methods used to manager DRBD 9
#
use strict;
use warnings;
use Data::Dumper;
use Scalar::Util qw(weaken isweak);
use Text::Diff;
use JSON;
our $VERSION = "3.0.0";
my $THIS_FILE = "DRBD.pm";
### Methods;
# allow_two_primaries
The core logic is done!!!! Still need to finish end-points for the WebUI to hook into, but the core of M3 is complete! Many, many bugs are expected, of course. :) * Created DRBD->check_if_syncsource() and ->check_if_synctarget() that return '1' if the target host is currently SyncSource or SyncTarget for any resource, respectively. * Updated DRBD->update_global_common() to return the unified-format diff if any changes were made to global-common.conf. * Created ScanCore->check_health() that returns the health score for a host. Created ->count_servers() that returns the number of servers on a host, how much RAM is used by those servers and, if available, the estimated migration time of the servers. Updated ->check_temperature() to set/clear/return the time that a host has been in a warning or critical temperature state. * Finished ScanCore->post_scan_analysis_node()!!! It certainly has bugs, and much testing is needed, but the logic is all in place! Oh what a slog that was... It should be far more intelligent than M2 though, once flushed out and tested. * Created Server->active_migrations() that returns '1' if any servers are in a migration on an Anvil! system. Updated ->migrate_virsh() to record how long a migration took in the "server::migration_duration" variable, which is averaged by ScanCore->count_servers() to estimate migration times. * Updated scan-drbd to check/update the global-common.conf file's config at the end of a scan. * Updated ScanCore itself to not scan when in maintenance mode. Also updated it to call 'anvil-safe-start' when ScanCore starts, so long as it is within ten minutes of the host booting. Signed-off-by: Digimer <digimer@alteeve.ca>
4 years ago
# check_if_syncsource
# check_if_synctarget
# check_proxy_license
# delete_resource
# gather_data
# get_devices
# get_next_resource
# get_status
# manage_resource
# parse_resource
# reload_defaults
# remove_backing_lv
# resource_uuid
# update_global_common
# _initialize_kmod
#
=pod
=encoding utf8
=head1 NAME
Anvil::Tools::DRBD
Provides all methods related to managing DRBD version 9.
=head1 SYNOPSIS
use Anvil::Tools;
# Get a common object handle on all Anvil::Tools modules.
my $anvil = Anvil::Tools->new();
# Access to methods using '$anvil->DRBD->X'.
#
#
=head1 METHODS
Methods in this module;
=cut
sub new
{
my $class = shift;
my $self = {
};
bless $self, $class;
return ($self);
}
# Get a handle on the Anvil::Tools object. I know that technically that is a sibling module, but it makes more
# sense in this case to think of it as a parent.
sub parent
{
my $self = shift;
my $parent = shift;
$self->{HANDLE}{TOOLS} = $parent if $parent;
# Defend against memory leads. See Scalar::Util'.
if (not isweak($self->{HANDLE}{TOOLS}))
{
weaken($self->{HANDLE}{TOOLS});
}
return ($self->{HANDLE}{TOOLS});
}
#############################################################################################################
# Public methods #
#############################################################################################################
=head2 allow_two_primaries
This enables dual-primary for the given resource. This is meant to be called prior to a live migration, and should be disabled again as soon as possible via C<< DRBD->reload_defaults >>.
Parameters;
=head3 password (optional)
This is the password to use when connecting to a remote machine. If not set, but C<< target >> is, an attempt to connect without a password will be made.
=head3 port (optional)
This is the TCP port to use when connecting to a remote machine. If not set, but C<< target >> is, C<< 22 >> will be used.
=head3 remote_user (optional, default 'root')
If C<< target >> is set, this will be the user we connect to the remote machine as.
=head3 resource (required)
This is the name of the resource to enable two primaries on.
=head3 set_to (optional, default 'yes')
This can be set to C<< yes >> to allow two-primary, or C<< no >> to disable it.
=head3 target (optional)
This is the IP or host name of the machine to read the version of. If this is not set, the local system's version is checked.
=head3 target_node_id (optional, but see condition below)
This is the DRBD target node's (connection) ID that we're enabling dual-primary with. If this is not passed, but C<< drbd::status::<local_short_host_name>::resource::<resource>::connection::<peer_name>::peer-node-id >> is set, it will be used. Otherwise this argument is required.
=cut
sub allow_two_primaries
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->allow_two_primaries()" }});
my $password = defined $parameter->{password} ? $parameter->{password} : "";
my $port = defined $parameter->{port} ? $parameter->{port} : "";
my $remote_user = defined $parameter->{remote_user} ? $parameter->{remote_user} : "root";
my $resource = defined $parameter->{resource} ? $parameter->{resource} : "";
my $set_to = defined $parameter->{set_to} ? $parameter->{set_to} : "yes";
my $target = defined $parameter->{target} ? $parameter->{target} : "";
my $target_node_id = defined $parameter->{target_node_id} ? $parameter->{target_node_id} : "";
my $return_code = 255;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
password => $anvil->Log->is_secure($password),
port => $port,
set_to => $set_to,
remote_user => $remote_user,
resource => $resource,
target => $target,
target_node_id => $target_node_id,
}});
if (not $resource)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "log_0020", variables => { method => "DRBD->allow_two_primaries()", parameter => "resource" }});
return($return_code);
}
if (($set_to ne "yes") && ($set_to ne "no"))
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0312", variables => { set_to => $set_to }});
return($return_code);
}
# Do we need to scan devices?
my $host = $anvil->Get->short_host_name;
if (not $anvil->data->{drbd}{config}{$host}{peer})
{
# Get our device list.
$anvil->DRBD->get_devices({
debug => $debug,
password => $password,
port => $port,
remote_user => $remote_user,
target => $target,
});
}
my $peer_name = $anvil->data->{drbd}{config}{$host}{peer};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { peer_name => $peer_name }});
if ($target_node_id !~ /^\d+$/)
{
# Can we find it?
if (not exists $anvil->data->{drbd}{status})
{
$anvil->DRBD->get_status({
debug => 2,
password => $password,
port => $port,
remote_user => $remote_user,
target => $target,
});
}
if ($anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{'peer-node-id'} =~ /^\d+$/)
{
$target_node_id = $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{'peer-node-id'};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { target_node_id => $target_node_id }});
}
else
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "log_0020", variables => { method => "DRBD->allow_two_primaries()", parameter => "target_node_id" }});
return($return_code);
}
}
my $key = $set_to eq "yes" ? "log_0350" : "log_0642";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, 'print' => 0, level => 1, key => "", variables => {
resource => $resource,
target_name => $peer_name,
target_node_id => $target_node_id,
}});
my $shell_call = $anvil->data->{path}{exe}{drbdsetup}." net-options ".$resource." ".$target_node_id." --allow-two-primaries=".$set_to;
my $output = "";
if ($anvil->Network->is_local({host => $target}))
{
# Local.
($output, $return_code) = $anvil->System->call({
debug => $debug,
shell_call => $shell_call,
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
}
else
{
# Remote call.
($output, my $error, $return_code) = $anvil->Remote->call({
debug => $debug,
shell_call => $shell_call,
target => $target,
port => $port,
password => $password,
remote_user => $remote_user,
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
error => $error,
output => $output,
return_code => $return_code,
}});
}
if ($return_code)
{
# Something went wrong.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, 'print' => 1, level => 0, priority => "err", key => "log_0356", variables => {
return_code => $return_code,
output => $output,
}});
}
return($return_code);
}
The core logic is done!!!! Still need to finish end-points for the WebUI to hook into, but the core of M3 is complete! Many, many bugs are expected, of course. :) * Created DRBD->check_if_syncsource() and ->check_if_synctarget() that return '1' if the target host is currently SyncSource or SyncTarget for any resource, respectively. * Updated DRBD->update_global_common() to return the unified-format diff if any changes were made to global-common.conf. * Created ScanCore->check_health() that returns the health score for a host. Created ->count_servers() that returns the number of servers on a host, how much RAM is used by those servers and, if available, the estimated migration time of the servers. Updated ->check_temperature() to set/clear/return the time that a host has been in a warning or critical temperature state. * Finished ScanCore->post_scan_analysis_node()!!! It certainly has bugs, and much testing is needed, but the logic is all in place! Oh what a slog that was... It should be far more intelligent than M2 though, once flushed out and tested. * Created Server->active_migrations() that returns '1' if any servers are in a migration on an Anvil! system. Updated ->migrate_virsh() to record how long a migration took in the "server::migration_duration" variable, which is averaged by ScanCore->count_servers() to estimate migration times. * Updated scan-drbd to check/update the global-common.conf file's config at the end of a scan. * Updated ScanCore itself to not scan when in maintenance mode. Also updated it to call 'anvil-safe-start' when ScanCore starts, so long as it is within ten minutes of the host booting. Signed-off-by: Digimer <digimer@alteeve.ca>
4 years ago
=head2 check_if_syncsource
This method checks to see if the local machine is C<< SyncSource >>. If so, this returns C<< 1 >>. Otherwise, it returns C<< 0 >>.
This method takes no parameters.
=cut
sub check_if_syncsource
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->check_if_syncsource()" }});
my $short_host_name = $anvil->Get->short_host_name();
$anvil->DRBD->get_status({debug => $debug});
# Now check to see if anything is sync'ing.
foreach my $resource (sort {$a cmp $b} keys %{$anvil->data->{drbd}{status}{$short_host_name}{resource}})
{
foreach my $peer_name (sort {$a cmp $b} keys %{$anvil->data->{drbd}{status}{$short_host_name}{resource}{$resource}{connection}})
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { peer_name => $peer_name }});
foreach my $volume (sort {$a cmp $b} %{$anvil->data->{drbd}{status}{$short_host_name}{resource}{$resource}{connection}{$peer_name}{volume}})
{
next if not exists $anvil->data->{drbd}{status}{$short_host_name}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'replication-state'};
my $replication_state = $anvil->data->{drbd}{status}{$short_host_name}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'replication-state'};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
volume => $volume,
replication_state => $replication_state,
}});
if ($replication_state =~ /SyncSource/i)
{
# We're SyncSource
return(1);
}
}
}
}
return(0);
}
=head2 check_if_synctarget
This method checks to see if the local machine is C<< SyncTarget >>. If so, this returns C<< 1 >>. Otherwise, it returns C<< 0 >>.
This method takes no parameters.
=cut
sub check_if_synctarget
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->check_if_synctarget()" }});
my $short_host_name = $anvil->Get->short_host_name();
$anvil->DRBD->get_status({debug => $debug});
# Now check to see if anything is sync'ing.
foreach my $resource (sort {$a cmp $b} keys %{$anvil->data->{drbd}{status}{$short_host_name}{resource}})
{
foreach my $peer_name (sort {$a cmp $b} keys %{$anvil->data->{drbd}{status}{$short_host_name}{resource}{$resource}{connection}})
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { peer_name => $peer_name }});
foreach my $volume (sort {$a cmp $b} %{$anvil->data->{drbd}{status}{$short_host_name}{resource}{$resource}{connection}{$peer_name}{volume}})
{
next if not exists $anvil->data->{drbd}{status}{$short_host_name}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'replication-state'};
my $replication_state = $anvil->data->{drbd}{status}{$short_host_name}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'replication-state'};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
volume => $volume,
replication_state => $replication_state,
}});
if ($replication_state =~ /SyncTarget/i)
{
# We're SyncTarget
return(1);
}
}
}
}
return(0);
}
=head2 check_proxy_license
This method checks to see if the DRBD Proxy license file exists and _appears_ correct. If things look good, C<< 0 >> is returned. If there is a problem, C<< 1 >> is returned.
=cut
sub check_proxy_license
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->check_proxy_license()" }});
if (not -e $anvil->data->{path}{configs}{'drbd-proxy.license'})
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0728"});
return(1);
}
# Read in the file.
my $wildcard_mac = 0;
my $problem = 0;
my $owner = "";
my $expiry_date = 0;
my $mac_addresses = [];
my $features = "";
my $signature = "";
my $license_body = $anvil->Storage->read_file({file => $anvil->data->{path}{configs}{'drbd-proxy.license'}});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { license_body => $license_body }});
foreach my $line (split/\n/, $license_body)
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { line => $line }});
if ($line =~ /^owner: (.*)$/)
{
$owner = $1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { owner => $owner }});
next;
}
if ($line =~ /^expiry-date: (.*)$/)
{
$expiry_date = $1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { expiry_date => $expiry_date }});
next;
}
if ($line =~ /^mac-address: (.*)$/)
{
my $this_mac = $1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { this_mac => $this_mac }});
if ($this_mac eq "00:00:00:00:00:00")
{
$wildcard_mac = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { wildcard_mac => $wildcard_mac }});
}
push @{$mac_addresses}, $this_mac;
next;
}
if ($line =~ /^features: (.*)$/)
{
$features = $1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { features => $features }});
next;
}
if ($line =~ /^signature: (.*)$/)
{
$signature = $1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { signature => $signature }});
next;
}
}
if ((not $owner) or
(not $expiry_date) or
(not $signature))
{
# Appears to not be a valid license file.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0731"});
return(1);
}
if (time >= $expiry_date)
{
# The license has expired.
$problem = 1;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0729"});
}
if (not $wildcard_mac)
{
# Loop through all MACs on this system and see if one matches the license.
my $match = 0;
my $host = $anvil->Get->short_host_name();
my $mac_count = @{$mac_addresses};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
host => $host,
mac_count => $mac_count,
}});
if (not $mac_count)
{
}
foreach my $in_iface (sort {$a cmp $b} keys %{$anvil->data->{network}{$host}{interface}})
{
my $mac_address = $anvil->data->{network}{$host}{interface}{$in_iface}{mac_address};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:in_iface' => $in_iface,
's2:mac_address' => $mac_address,
}});
foreach my $licensed_mac (@{$mac_addresses})
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { licensed_mac => $licensed_mac }});
if (lc($mac_address) eq lc($licensed_mac))
{
$match = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { match => $match }});
last;
}
}
last if $match;
}
if (not $match)
{
# MACs don't match.
$problem = 1;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0730"});
}
}
return($problem);
}
=head2 delete_resource
This method deletes an entire resource. It does this by looping through the volumes configured in a resource and deleting them one after the other (even if there is only one volume).
On success, C<< 0 >> is returned. If there are any issues, C<< !!error!! >> will be returned.
Parameters;
=head3 resource (required)
This is the name of the resource to be deleted.
=head3 wait (optional, default '1')
This controls whether we wait for a resource that is C<< Primary >> or C<< SyncSource >> to demote or the sync target to disconnect before proceeding. If whis is set to C<< 0 >>, instead of waiting, the method returns an error and aborts.
=cut
sub delete_resource
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->delete_resource()" }});
my $resource = defined $parameter->{resource} ? $parameter->{resource} : "";
my $wait = defined $parameter->{'wait'} ? $parameter->{'wait'} : 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
resource => $resource,
'wait' => $wait
}});
if (not $resource)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "log_0020", variables => { method => "DRBD->delete_resource()", parameter => "resource" }});
return('!!error!!');
}
$anvil->DRBD->gather_data({debug => $debug});
if (not exists $anvil->data->{new}{resource}{$resource})
{
# Resource not found, so it appears to already be gone.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0228", variables => { resource => $resource }});
return(0);
}
my $waiting = 1;
while($waiting)
{
my $peer_needs_us = 0;
foreach my $volume (sort {$a cmp $b} keys %{$anvil->data->{new}{resource}{$resource}{volume}})
{
# If we're sync source, or we're primary, we'll either wait or abort.
my $device_path = $anvil->data->{new}{resource}{$resource}{volume}{$volume}{device_path};
my $backing_disk = $anvil->data->{new}{resource}{$resource}{volume}{$volume}{backing_disk};
my $device_minor = $anvil->data->{new}{resource}{$resource}{volume}{$volume}{device_minor};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:device_path' => $device_path,
's2:backing_disk' => $backing_disk,
's3:device_minor' => $device_minor,
}});
$anvil->data->{drbd}{resource}{$resource}{backing_disk}{$backing_disk} = 1;
foreach my $peer (sort {$a cmp $b} keys %{$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}})
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::resource::${resource}::volume::${volume}::peer::${peer}::local_disk_state" => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{local_disk_state},
}});
if (($anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{local_disk_state} eq "startingsyncs") or
($anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{local_disk_state} eq "syncsource") or
($anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{local_disk_state} eq "pausedsyncs") or
($anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{local_disk_state} eq "ahead"))
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, priority => "alert", key => "warning_0074", variables => {
peer_name => $peer,
resource => $resource,
volume => $volume,
disk_state => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{local_disk_state},
}});
$peer_needs_us = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { peer_needs_us => $peer_needs_us }});
}
}
}
if ($peer_needs_us)
{
if (not $wait)
{
# Abort.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0229"});
return('!!error!!');
}
else
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, priority => "alert", key => "log_0588"});
sleep 10;
$anvil->DRBD->gather_data({debug => $debug})
}
}
else
{
# No need to wait now.
$waiting = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { waiting => $waiting }});
}
}
# Down the resource, if needed.
$anvil->DRBD->manage_resource({
debug => $debug,
resource => $resource,
task => "down",
});
# Wipe the DRBD MDs from each backing LV
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0590", variables => { resource => $resource }});
my $shell_call = $anvil->data->{path}{exe}{drbdadm}." --force wipe-md ".$resource;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { shell_call => $shell_call }});
my ($output, $return_code) = $anvil->System->call({shell_call => $shell_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
if ($return_code)
{
# Should have been '0'
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, priority => "err", key => "error_0230", variables => {
shell_call => $shell_call,
return_code => $return_code,
output => $output,
}});
return('!!error!!');
}
# Now wipefs and lvremove each backing device
foreach my $backing_disk (sort {$a cmp $b} keys %{$anvil->data->{drbd}{resource}{$resource}{backing_disk}})
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0591", variables => { device_path => $backing_disk }});
my $return_code = $anvil->DRBD->remove_backing_lv({
debug => $debug,
backing_disk => $backing_disk,
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { return_code => $return_code }});
if ($return_code)
{
# Should have been '0'
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, priority => "err", key => "error_0230", variables => {
shell_call => $shell_call,
return_code => $return_code,
output => $output,
}});
return('!!error!!');
}
}
# Now unlink the resource config file.
my $resource_file = $anvil->data->{new}{resource}{$resource}{config_file};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { resource_file => $resource_file }});
if (-f $resource_file)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0589", variables => { file => $resource_file }});
unlink $resource_file;
sleep 1;
if (-f $resource_file)
{
# WTF?
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, priority => "err", key => "log_0243", variables => { file => $resource_file }});
return('!!error!!');
}
else
{
# Success!
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "job_0134", variables => { file_path => $resource_file }});
}
}
return(0);
}
=head2 gather_data
This calls C<< drbdadm >> to collect the configuration of the local system and parses it. This methid is designed for use by C<< scan_drbd >>, but is useful elsewhere. This is note-worthy as the data is stored under a C<< new::... >> hash.
On error, C<< 1 >> is returned. On success, C<< 0 >> is returned.
Parameters;
=head3 xml (optional)
If set to the XML generated by C<< drbdadm dump-xml >> elsewhere, this will be parsed instead of making the call.
=cut
sub gather_data
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->gather_data()" }});
### NOTE: Left off here - take an XML and parse that instead of collecting it, if passed.
my $xml = defined $parameter->{xml} ? $parameter->{xml} : "";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
xml => $xml,
}});
# Is DRBD even installed?
if (not $xml)
{
if (not -e $anvil->data->{path}{exe}{drbdadm})
{
# This is an error, but it happens a lot because we're called by scan_drbd from Striker
# dashboards often. As such, this log level is '2'.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 2, key => "error_0251"});
return(1);
}
($xml, my $return_code) = $anvil->System->call({shell_call => $anvil->data->{path}{exe}{drbdadm}." dump-xml"});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
xml => $xml,
return_code => $return_code,
}});
if ($return_code)
{
# Failed to dump the XML.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "error_0252", variables => { return_code => $return_code }});
return(1);
}
}
my $local_host_name = $anvil->Get->host_name;
my $local_short_host_name = $anvil->Get->short_host_name;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
local_host_name => $local_host_name,
local_short_host_name => $local_short_host_name,
}});
local $@;
my $dom = eval { XML::LibXML->load_xml(string => $xml); };
if ($@)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "error_0253", variables => {
xml => $xml,
error => $@,
}});
return(1);
}
else
{
# Successful parse!
### TODO: Might be best to config these default values by calling/parsing
### 'drbdsetup show <resource> --show-defaults'.
$anvil->data->{new}{scan_drbd}{scan_drbd_common_xml} = $xml;
$anvil->data->{new}{scan_drbd}{scan_drbd_flush_disk} = 1;
$anvil->data->{new}{scan_drbd}{scan_drbd_flush_md} = 1;
$anvil->data->{new}{scan_drbd}{scan_drbd_timeout} = 6; # Default is '60', 6 seconds
$anvil->data->{new}{scan_drbd}{scan_drbd_total_sync_speed} = 0;
foreach my $name ($dom->findnodes('/config/common/section'))
{
my $section = $name->{name};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { section => $section }});
foreach my $option_name ($name->findnodes('./option'))
{
my $variable = $option_name->{name};
my $value = $option_name->{value};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:variable' => $variable,
's2:value' => $value,
}});
if ($section eq "net")
{
if ($variable eq "timeout")
{
$value /= 10;
$anvil->data->{new}{scan_drbd}{scan_drbd_timeout} = ($value / 10);
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::scan_drbd::scan_drbd_timeout" => $anvil->data->{new}{scan_drbd}{scan_drbd_timeout},
}});
}
}
if ($section eq "disk")
{
if ($variable eq "disk-flushes")
{
$anvil->data->{new}{scan_drbd}{scan_drbd_flush_disk} = $value eq "no" ? 0 : 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::scan_drbd::scan_drbd_flush_disk" => $anvil->data->{new}{scan_drbd}{scan_drbd_flush_disk},
}});
}
if ($variable eq "md-flushes")
{
$anvil->data->{new}{scan_drbd}{scan_drbd_flush_md} = $value eq "no" ? 0 : 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::scan_drbd::scan_drbd_flush_md" => $anvil->data->{new}{scan_drbd}{scan_drbd_flush_md},
}});
}
}
}
}
foreach my $name ($dom->findnodes('/config/resource'))
{
my $resource = $name->{name};
my $conf_file = $name->{'conf-file-line'};
$conf_file =~ s/:\d+$//;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:resource' => $resource,
's2:conf_file' => $conf_file,
}});
$anvil->data->{new}{resource}{$resource}{up} = 0;
$anvil->data->{new}{resource}{$resource}{xml} = $name->toString;
$anvil->data->{new}{resource}{$resource}{config_file} = $conf_file;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::resource::${resource}::xml" => $anvil->data->{new}{resource}{$resource}{xml},
"new::resource::${resource}::config_file" => $anvil->data->{new}{resource}{$resource}{config_file},
}});
foreach my $host ($name->findnodes('./host'))
{
my $this_host_name = $host->{name};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { this_host_name => $this_host_name }});
# Record the details under the hosts
foreach my $volume_vnr ($host->findnodes('./volume'))
{
my $volume = $volume_vnr->{vnr};
my $meta_disk = $volume_vnr->findvalue('./meta-disk');
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:volume' => $volume,
's2:meta_disk' => $meta_disk,
}});
$anvil->data->{new}{resource}{$resource}{host}{$this_host_name}{volume}{$volume}{device_path} = $volume_vnr->findvalue('./device');
$anvil->data->{new}{resource}{$resource}{host}{$this_host_name}{volume}{$volume}{backing_disk} = $volume_vnr->findvalue('./disk');
$anvil->data->{new}{resource}{$resource}{host}{$this_host_name}{volume}{$volume}{device_minor} = $volume_vnr->findvalue('./device/@minor');
$anvil->data->{new}{resource}{$resource}{host}{$this_host_name}{volume}{$volume}{meta_disk} = $meta_disk;
$anvil->data->{new}{resource}{$resource}{host}{$this_host_name}{volume}{$volume}{size} = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:new::resource::${resource}::host::${this_host_name}::volume::${volume}::device_path" => $anvil->data->{new}{resource}{$resource}{host}{$this_host_name}{volume}{$volume}{device_path},
"s2:new::resource::${resource}::host::${this_host_name}::volume::${volume}::backing_disk" => $anvil->data->{new}{resource}{$resource}{host}{$this_host_name}{volume}{$volume}{backing_disk},
"s3:new::resource::${resource}::host::${this_host_name}::volume::${volume}::device_minor" => $anvil->data->{new}{resource}{$resource}{host}{$this_host_name}{volume}{$volume}{device_minor},
"s4:new::resource::${resource}::host::${this_host_name}::volume::${volume}::meta_disk" => $anvil->data->{new}{resource}{$resource}{host}{$this_host_name}{volume}{$volume}{meta_disk},
}});
# Record the local data only.
if (($this_host_name eq $local_host_name) or ($this_host_name eq $local_short_host_name))
{
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{device_path} = $volume_vnr->findvalue('./device');
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{backing_disk} = $volume_vnr->findvalue('./disk');
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{device_minor} = $volume_vnr->findvalue('./device/@minor');
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{size} = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:new::resource::${resource}::volume::${volume}::device_path" => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{device_path},
"s2:new::resource::${resource}::volume::${volume}::backing_disk" => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{backing_disk},
"s3:new::resource::${resource}::volume::${volume}::device_minor" => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{device_minor},
}});
}
}
}
foreach my $connection ($name->findnodes('./connection'))
{
my $host1_name = "";
my $host1_ip_address = "";
my $host1_tcp_port = "";
my $host2_name = "";
my $host2_ip_address = "";
my $host2_tcp_port = "";
my $peer = "";
foreach my $host ($connection->findnodes('./host'))
{
my $this_host_name = $host->{name};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { this_host_name => $this_host_name }});
if (not $host1_name)
{
$host1_name = $this_host_name;
$host1_ip_address = $host->findvalue('./address');
$host1_tcp_port = $host->findvalue('./address/@port');
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
host1_name => $host1_name,
host1_ip_address => $host1_ip_address,
host1_tcp_port => $host1_tcp_port,
}});
}
else
{
$host2_name = $this_host_name;
$host2_ip_address = $host->findvalue('./address');
$host2_tcp_port = $host->findvalue('./address/@port');
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
host2_name => $host2_name,
host2_ip_address => $host2_ip_address,
host2_tcp_port => $host2_tcp_port,
}});
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host1_ip_address} = $host1_ip_address;
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host1_tcp_port} = $host1_tcp_port;
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_ip_address} = $host2_ip_address;
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_tcp_port} = $host2_tcp_port;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host1_ip_address" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host1_ip_address},
"s2:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host1_tcp_port" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host1_tcp_port},
"s3:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host2_ip_address" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_ip_address},
"s4:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host2_tcp_port" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_tcp_port},
}});
foreach my $proxy ($host->findnodes('./proxy'))
{
my $host_name = $proxy->{hostname};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { host_name => $host_name }});
# This should always be the target, but lets be safe/careful
next if $host_name ne $host2_name;
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_inside_ip_address} = $proxy->findvalue('./inside');
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_inside_tcp_port} = $proxy->findvalue('./inside/@port');
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_outside_ip_address} = $proxy->findvalue('./outside');
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_outside_tcp_port} = $proxy->findvalue('./outside/@port');
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host2_inside_ip_address" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_inside_ip_address},
"s2:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host2_inside_tcp_port" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_inside_tcp_port},
"s3:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host2_outside_ip_address" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_outside_ip_address},
"s4:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host2_outside_tcp_port" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_outside_tcp_port},
}});
$anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{inside}{ip_address} = $proxy->findvalue('./inside');
$anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{inside}{tcp_port} = $proxy->findvalue('./inside/@port');
$anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{outside}{ip_address} = $proxy->findvalue('./outside');
$anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{outside}{tcp_port} = $proxy->findvalue('./outside/@port');
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::resource::${resource}::proxy::${host_name}::inside::ip_address" => $anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{inside}{ip_address},
"new::resource::${resource}::proxy::${host_name}::inside::tcp_port" => $anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{inside}{tcp_port},
"new::resource::${resource}::proxy::${host_name}::outside::ip_address" => $anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{outside}{ip_address},
"new::resource::${resource}::proxy::${host_name}::outside::tcp_port" => $anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{outside}{tcp_port},
}});
}
}
# $peer = $this_host_name;
# $anvil->data->{new}{resource}{$resource}{peer}{$peer}{peer_ip_address} = $host->findvalue('./address');
# $anvil->data->{new}{resource}{$resource}{peer}{$peer}{tcp_port} = $host->findvalue('./address/@port');
# $anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
# "s1:new::resource::${resource}::peer::${peer}::peer_ip_address" => $anvil->data->{new}{resource}{$resource}{peer}{$peer}{peer_ip_address},
# "s2:new::resource::${resource}::peer::${peer}::tcp_port" => $anvil->data->{new}{resource}{$resource}{peer}{$peer}{tcp_port}." (".$host->findvalue('./address/@port').")",
# }});
# if (not exists $anvil->data->{new}{resource}{$resource}{peer}{$peer}{protocol})
# {
# $anvil->data->{new}{resource}{$resource}{peer}{$peer}{protocol} = "unknown";
# $anvil->data->{new}{resource}{$resource}{peer}{$peer}{fencing} = "unknown";
# $anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
# "s1:new::resource::${resource}::peer::${peer}::protocol" => $anvil->data->{new}{resource}{$resource}{peer}{$peer}{protocol},
# "s2:new::resource::${resource}::peer::${peer}::fencing" => $anvil->data->{new}{resource}{$resource}{peer}{$peer}{fencing},
# }});
# }
#
# foreach my $volume (sort {$a cmp $b} keys %{$anvil->data->{new}{resource}{$resource}{volume}})
# {
# $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{connection_state} = "disconnected";
# $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{local_disk_state} = "down";
# $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{peer_disk_state} = "unknown";
# $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{local_role} = "down";
# $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{peer_role} = "unknown";
# $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{out_of_sync_size} = -1;
# $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{replication_speed} = 0;
# $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{estimated_time_to_sync} = 0;
# }
}
if (($host1_name eq $local_short_host_name) or
($host1_name eq $local_host_name) or
($host2_name eq $local_short_host_name) or
($host2_name eq $local_host_name))
{
# This is one of our connections.
my $peer = "";
if (($host1_name eq $local_short_host_name) or ($host1_name eq $local_host_name))
{
# Our peer is host2
$peer = $host2_name;
$anvil->data->{new}{resource}{$resource}{peer}{$peer}{peer_ip_address} = $host2_ip_address;
$anvil->data->{new}{resource}{$resource}{peer}{$peer}{tcp_port} = $host2_tcp_port;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:new::resource::${resource}::peer::${peer}::peer_ip_address" => $anvil->data->{new}{resource}{$resource}{peer}{$peer}{peer_ip_address},
"s2:new::resource::${resource}::peer::${peer}::tcp_port" => $anvil->data->{new}{resource}{$resource}{peer}{$peer}{tcp_port},
}});
}
else
{
# Our peer is host1
$peer = $host1_name;
$anvil->data->{new}{resource}{$resource}{peer}{$peer}{peer_ip_address} = $host1_ip_address;
$anvil->data->{new}{resource}{$resource}{peer}{$peer}{tcp_port} = $host1_tcp_port;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:new::resource::${resource}::peer::${peer}::peer_ip_address" => $anvil->data->{new}{resource}{$resource}{peer}{$peer}{peer_ip_address},
"s2:new::resource::${resource}::peer::${peer}::tcp_port" => $anvil->data->{new}{resource}{$resource}{peer}{$peer}{tcp_port},
}});
}
foreach my $name ($connection->findnodes('./section'))
{
my $section = $name->{name};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { section => $section }});
foreach my $option_name ($name->findnodes('./option'))
{
my $variable = $option_name->{name};
my $value = $option_name->{value};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:variable' => $variable,
's2:value' => $value,
}});
if ($section eq "net")
{
if ($variable eq "protocol")
{
$anvil->data->{new}{resource}{$resource}{peer}{$peer}{protocol} = $value;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::resource::${resource}::peer::${peer}::protocol" => $anvil->data->{new}{resource}{$resource}{peer}{$peer}{protocol},
}});
}
if ($variable eq "fencing")
{
$anvil->data->{new}{resource}{$resource}{peer}{$peer}{fencing} = $value;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::resource::${resource}::peer::${peer}::fencing" => $anvil->data->{new}{resource}{$resource}{peer}{$peer}{fencing},
}});
}
}
}
}
foreach my $volume (sort {$a cmp $b} keys %{$anvil->data->{new}{resource}{$resource}{volume}})
{
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{connection_state} = "disconnected";
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{local_disk_state} = "down";
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{peer_disk_state} = "unknown";
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{local_role} = "down";
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{peer_role} = "unknown";
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{out_of_sync_size} = -1;
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{replication_speed} = 0;
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{estimated_time_to_sync} = 0;
}
}
}
}
}
# If DRBD is stopped, this directory won't exist.
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"path::directories::resource_status" => $anvil->data->{path}{directories}{resource_status},
}});
if (-d $anvil->data->{path}{directories}{resource_status})
{
local(*DIRECTORY);
opendir(DIRECTORY, $anvil->data->{path}{directories}{resource_status});
while(my $file = readdir(DIRECTORY))
{
next if $file eq ".";
next if $file eq "..";
my $full_path = $anvil->data->{path}{directories}{resource_status}."/".$file;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { full_path => $full_path }});
if (-d $full_path)
{
my $resource = $file;
$anvil->data->{new}{resource}{$resource}{up} = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::resource::${resource}::up" => $anvil->data->{new}{resource}{$resource}{up},
}});
}
}
closedir(DIRECTORY);
}
foreach my $resource (sort {$a cmp $b} keys %{$anvil->data->{new}{resource}})
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::resource::${resource}::up" => $anvil->data->{new}{resource}{$resource}{up},
}});
# If the resource isn't up, there's won't be a proc file to read.
next if not $anvil->data->{new}{resource}{$resource}{up};
foreach my $volume (sort {$a cmp $b} keys %{$anvil->data->{new}{resource}{$resource}{volume}})
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { volume => $volume }});
foreach my $peer (sort {$a cmp $b} keys %{$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}})
{
my $proc_file = $anvil->data->{path}{directories}{resource_status}."/".$resource."/connections/".$peer."/".$volume."/proc_drbd";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { proc_file => $proc_file }});
my $file_body = $anvil->Storage->read_file({file => $proc_file});
my $progress = "";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { file_body => $file_body }});
foreach my $line (split/\n/, $file_body)
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { line => $line }});
if ($line =~ /cs:(.*?) /)
{
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{connection_state} = lc($1);
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::resource::${resource}::volume::${volume}::peer::${peer}::connection_state" => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{connection_state},
}});
}
if ($line =~ /ro:(.*?)\/(.*?) /)
{
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{local_role} = lc($1);
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{peer_role} = lc($2);
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::resource::${resource}::volume::${volume}::peer::${peer}::local_role" => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{local_role},
"new::resource::${resource}::volume::${volume}::peer::${peer}::peer_role" => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{peer_role},
}});
* THe get_cpu endpoint was completed. * The get_mmeory endpoint was completed. * The get_replicated_storage endpoint was completed, though it requires testing and likely has issues. To prepare for the get_status endpoint work, I needed to update ScanCore and modules to track the host_status. This commit contains the work needed for this. * Updated ScanCore->post_scan_analysis_striker() to use configured fence devices (except PDUs) to check if a target host is off or on, in there is no host_ipmi interface. In all cases, if a machine can be confirmed on or off, the host_status is now updated. * To support the above fence based power checks, updated scan-cluster to store the on-disk CIB in the new scan_cluster -> scan_cluster_cib colume. * Updated ScanCore->parse_cib() to map stonith primitive IDs to fence agents. Updated ->parse_crm_mon() to not call if the executable doesn't exist to avoid unhelpful error messages in the logs when called from a Striker. * Update DRBD->gather_data() to get the size data from /sys/block/drbd<minor>/size' x '/sys/block/drbd<minor>/queue/logical_block_size so it works when a device is Secondary (and can't be promoted). * Updated Database->get_hosts_info() to record the short host name as well as the stored host name. Created ->update_host_status() as a wrapper to ->insert_or_update_hosts() that only updates the host status. * Updated anvil-join-anvil to disabled ksm and ksmtuned daemons. * Updated scancore and anvil-daemon to set the host_status to 'online' on startup. Signed-off-by: Digimer <digimer@alteeve.ca>
4 years ago
# Get the resource size by reading '/sys/block/drbd<minor>/size' and multiplying by '/sys/block/<disk>/queue/logical_block_size'
my $drbd_device = "/sys/block/drbd".$anvil->data->{new}{resource}{$resource}{volume}{$volume}{device_minor};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { drbd_device => $drbd_device }});
if (-d $drbd_device)
{
* THe get_cpu endpoint was completed. * The get_mmeory endpoint was completed. * The get_replicated_storage endpoint was completed, though it requires testing and likely has issues. To prepare for the get_status endpoint work, I needed to update ScanCore and modules to track the host_status. This commit contains the work needed for this. * Updated ScanCore->post_scan_analysis_striker() to use configured fence devices (except PDUs) to check if a target host is off or on, in there is no host_ipmi interface. In all cases, if a machine can be confirmed on or off, the host_status is now updated. * To support the above fence based power checks, updated scan-cluster to store the on-disk CIB in the new scan_cluster -> scan_cluster_cib colume. * Updated ScanCore->parse_cib() to map stonith primitive IDs to fence agents. Updated ->parse_crm_mon() to not call if the executable doesn't exist to avoid unhelpful error messages in the logs when called from a Striker. * Update DRBD->gather_data() to get the size data from /sys/block/drbd<minor>/size' x '/sys/block/drbd<minor>/queue/logical_block_size so it works when a device is Secondary (and can't be promoted). * Updated Database->get_hosts_info() to record the short host name as well as the stored host name. Created ->update_host_status() as a wrapper to ->insert_or_update_hosts() that only updates the host status. * Updated anvil-join-anvil to disabled ksm and ksmtuned daemons. * Updated scancore and anvil-daemon to set the host_status to 'online' on startup. Signed-off-by: Digimer <digimer@alteeve.ca>
4 years ago
my $logical_block_size = $anvil->Words->clean_spaces({string => $anvil->Storage->read_file({file => $drbd_device."/queue/logical_block_size"})});
my $sector_size = $anvil->Words->clean_spaces({string => $anvil->Storage->read_file({file => $drbd_device."/size"})});
my $size = $logical_block_size * $sector_size;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
logical_block_size => $anvil->Convert->add_commas({number => $logical_block_size}),
sector_size => $anvil->Convert->add_commas({number => $sector_size}),
size => $anvil->Convert->add_commas({number => $size})." (".$anvil->Convert->bytes_to_human_readable({'bytes' => $size}).")",
}});
* THe get_cpu endpoint was completed. * The get_mmeory endpoint was completed. * The get_replicated_storage endpoint was completed, though it requires testing and likely has issues. To prepare for the get_status endpoint work, I needed to update ScanCore and modules to track the host_status. This commit contains the work needed for this. * Updated ScanCore->post_scan_analysis_striker() to use configured fence devices (except PDUs) to check if a target host is off or on, in there is no host_ipmi interface. In all cases, if a machine can be confirmed on or off, the host_status is now updated. * To support the above fence based power checks, updated scan-cluster to store the on-disk CIB in the new scan_cluster -> scan_cluster_cib colume. * Updated ScanCore->parse_cib() to map stonith primitive IDs to fence agents. Updated ->parse_crm_mon() to not call if the executable doesn't exist to avoid unhelpful error messages in the logs when called from a Striker. * Update DRBD->gather_data() to get the size data from /sys/block/drbd<minor>/size' x '/sys/block/drbd<minor>/queue/logical_block_size so it works when a device is Secondary (and can't be promoted). * Updated Database->get_hosts_info() to record the short host name as well as the stored host name. Created ->update_host_status() as a wrapper to ->insert_or_update_hosts() that only updates the host status. * Updated anvil-join-anvil to disabled ksm and ksmtuned daemons. * Updated scancore and anvil-daemon to set the host_status to 'online' on startup. Signed-off-by: Digimer <digimer@alteeve.ca>
4 years ago
if ($size > 0)
{
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{size} = $size;
* THe get_cpu endpoint was completed. * The get_mmeory endpoint was completed. * The get_replicated_storage endpoint was completed, though it requires testing and likely has issues. To prepare for the get_status endpoint work, I needed to update ScanCore and modules to track the host_status. This commit contains the work needed for this. * Updated ScanCore->post_scan_analysis_striker() to use configured fence devices (except PDUs) to check if a target host is off or on, in there is no host_ipmi interface. In all cases, if a machine can be confirmed on or off, the host_status is now updated. * To support the above fence based power checks, updated scan-cluster to store the on-disk CIB in the new scan_cluster -> scan_cluster_cib colume. * Updated ScanCore->parse_cib() to map stonith primitive IDs to fence agents. Updated ->parse_crm_mon() to not call if the executable doesn't exist to avoid unhelpful error messages in the logs when called from a Striker. * Update DRBD->gather_data() to get the size data from /sys/block/drbd<minor>/size' x '/sys/block/drbd<minor>/queue/logical_block_size so it works when a device is Secondary (and can't be promoted). * Updated Database->get_hosts_info() to record the short host name as well as the stored host name. Created ->update_host_status() as a wrapper to ->insert_or_update_hosts() that only updates the host status. * Updated anvil-join-anvil to disabled ksm and ksmtuned daemons. * Updated scancore and anvil-daemon to set the host_status to 'online' on startup. Signed-off-by: Digimer <digimer@alteeve.ca>
4 years ago
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"new::resource::${resource}::volume::${volume}::size" => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{size}." (".$anvil->Convert->bytes_to_human_readable({'bytes' => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{size}}).")",
}});
}
}
}
if ($line =~ /ds:(.*?)\/(.*?) /)
{
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{local_disk_state} = lc($1);
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{peer_disk_state} = lc($2);
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::resource::${resource}::volume::${volume}::peer::${peer}::local_disk_state" => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{local_disk_state},
"new::resource::${resource}::volume::${volume}::peer::${peer}::peer_disk_state" => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{peer_disk_state},
}});
}
if ($line =~ /oos:(\d+)/)
{
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{out_of_sync_size} = $1 * 1024;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::resource::${resource}::volume::${volume}::peer::${peer}::out_of_sync_size" => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{out_of_sync_size}." (".$anvil->Convert->bytes_to_human_readable({'bytes' => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{out_of_sync_size}}).")",
}});
}
* THe get_cpu endpoint was completed. * The get_mmeory endpoint was completed. * The get_replicated_storage endpoint was completed, though it requires testing and likely has issues. To prepare for the get_status endpoint work, I needed to update ScanCore and modules to track the host_status. This commit contains the work needed for this. * Updated ScanCore->post_scan_analysis_striker() to use configured fence devices (except PDUs) to check if a target host is off or on, in there is no host_ipmi interface. In all cases, if a machine can be confirmed on or off, the host_status is now updated. * To support the above fence based power checks, updated scan-cluster to store the on-disk CIB in the new scan_cluster -> scan_cluster_cib colume. * Updated ScanCore->parse_cib() to map stonith primitive IDs to fence agents. Updated ->parse_crm_mon() to not call if the executable doesn't exist to avoid unhelpful error messages in the logs when called from a Striker. * Update DRBD->gather_data() to get the size data from /sys/block/drbd<minor>/size' x '/sys/block/drbd<minor>/queue/logical_block_size so it works when a device is Secondary (and can't be promoted). * Updated Database->get_hosts_info() to record the short host name as well as the stored host name. Created ->update_host_status() as a wrapper to ->insert_or_update_hosts() that only updates the host status. * Updated anvil-join-anvil to disabled ksm and ksmtuned daemons. * Updated scancore and anvil-daemon to set the host_status to 'online' on startup. Signed-off-by: Digimer <digimer@alteeve.ca>
4 years ago
if ($line =~ /sync'ed:\s+(\d.*\%)/)
{
$progress .= $1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { progress => $progress }});
}
if ($line =~ /speed: (.*?) \(/)
{
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{replication_speed} = $1;
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{replication_speed} =~ s/,//g;
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{replication_speed} *= 1024;
$anvil->data->{new}{scan_drbd}{scan_drbd_total_sync_speed} += $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{replication_speed};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:new::resource::${resource}::volume::${volume}::peer::${peer}::replication_speed" => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{replication_speed}." (".$anvil->Convert->bytes_to_human_readable({'bytes' => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{replication_speed}}).")",
"s2:new::scan_drbd::scan_drbd_total_sync_speed" => $anvil->data->{new}{scan_drbd}{scan_drbd_total_sync_speed}." (".$anvil->Convert->bytes_to_human_readable({'bytes' => $anvil->data->{new}{scan_drbd}{scan_drbd_total_sync_speed}}).")",
}});
}
if ($line =~ /finish: (\d+):(\d+):(\d+) /)
{
my $hours = $1;
my $minutes = $2;
my $seconds = $3;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:hours' => $hours,
's2:minutes' => $minutes,
's3:seconds' => $seconds,
}});
$anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{estimated_time_to_sync} = (($hours * 3600) + ($minutes * 60) + $seconds);
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::resource::${resource}::volume::${volume}::peer::${peer}::estimated_time_to_sync" => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{estimated_time_to_sync}." (".$anvil->Convert->time({'time' => $anvil->data->{new}{resource}{$resource}{volume}{$volume}{peer}{$peer}{estimated_time_to_sync}, long => 1, translate => 1}).")",
}});
}
}
}
}
}
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::scan_drbd::scan_drbd_total_sync_speed" => $anvil->data->{new}{scan_drbd}{scan_drbd_total_sync_speed}." (".$anvil->Convert->bytes_to_human_readable({'bytes' => $anvil->data->{new}{scan_drbd}{scan_drbd_total_sync_speed}}).")",
}});
# For resources using drbd-proxy, the host1_to_host2 will be using the internal IP, which we want to
# switch to the 'outside' IP. Also, the ports will need to be concatenated together as a CSV list.
foreach my $resource (sort {$a cmp $b} keys %{$anvil->data->{new}{resource}})
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { resource => $resource }});
foreach my $host1_name (sort {$a cmp $b} keys %{$anvil->data->{new}{resource}{$resource}{host1_to_host2}})
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { host1_name => $host1_name }});
foreach my $host2_name (sort {$a cmp $b} keys %{$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}})
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { host2_name => $host2_name }});
my $host1_ip_address = $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host1_ip_address};
my $host1_tcp_port = $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host1_tcp_port};
my $host2_ip_address = $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_ip_address};
my $host2_tcp_port = $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_tcp_port};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:host1_ip_address" => $host1_ip_address,
"s2:host1_tcp_port" => $host1_tcp_port,
"s3:host2_ip_address" => $host2_ip_address,
"s4:host2_tcp_port" => $host2_tcp_port,
}});
my $host1_tcp_ports = $host1_tcp_port.",";
my $host2_tcp_ports = $host2_tcp_port.",";
my $proxy_found = 0;
if (exists $anvil->data->{new}{resource}{$resource}{proxy}{$host1_name})
{
$proxy_found = 1;
my $host1_inside_ip_address = $anvil->data->{new}{resource}{$resource}{proxy}{$host1_name}{inside}{ip_address};
my $host1_inside_tcp_port = $anvil->data->{new}{resource}{$resource}{proxy}{$host1_name}{inside}{tcp_port};
my $host1_outside_ip_address = $anvil->data->{new}{resource}{$resource}{proxy}{$host1_name}{outside}{ip_address};
my $host1_outside_tcp_port = $anvil->data->{new}{resource}{$resource}{proxy}{$host1_name}{outside}{tcp_port};
$host1_tcp_ports .= $host1_inside_tcp_port.",".$host1_outside_tcp_port;
$host1_ip_address = $host1_outside_ip_address;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:proxy_found" => $proxy_found,
"s2:host1_inside_ip_address" => $host1_inside_ip_address,
"s3:host1_inside_tcp_port" => $host1_inside_tcp_port,
"s4:host1_outside_ip_address" => $host1_outside_ip_address,
"s5:host1_outside_tcp_port" => $host1_outside_tcp_port,
"s6:host1_tcp_ports" => $host1_tcp_ports,
"s7:host1_ip_address" => $host1_ip_address,
}});
}
if (exists $anvil->data->{new}{resource}{$resource}{proxy}{$host2_name})
{
$proxy_found = 1;
my $host2_inside_ip_address = $anvil->data->{new}{resource}{$resource}{proxy}{$host2_name}{inside}{ip_address};
my $host2_inside_tcp_port = $anvil->data->{new}{resource}{$resource}{proxy}{$host2_name}{inside}{tcp_port};
my $host2_outside_ip_address = $anvil->data->{new}{resource}{$resource}{proxy}{$host2_name}{outside}{ip_address};
my $host2_outside_tcp_port = $anvil->data->{new}{resource}{$resource}{proxy}{$host2_name}{outside}{tcp_port};
$host2_tcp_ports .= $host2_inside_tcp_port.",".$host2_outside_tcp_port;
$host2_ip_address = $host2_outside_ip_address;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:proxy_found" => $proxy_found,
"s2:host2_inside_ip_address" => $host2_inside_ip_address,
"s3:host2_inside_tcp_port" => $host2_inside_tcp_port,
"s4:host2_outside_ip_address" => $host2_outside_ip_address,
"s5:host2_outside_tcp_port" => $host2_outside_tcp_port,
"s6:host2_tcp_ports" => $host2_tcp_ports,
"s7:host2_ip_address" => $host2_ip_address,
}});
}
next if not $proxy_found;
# Clear off trailing commas
$host1_tcp_ports =~ s/,$//;
$host2_tcp_ports =~ s/,$//;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:host1_tcp_ports" => $host1_tcp_ports,
"s2:host2_tcp_ports" => $host2_tcp_ports,
}});
# Save the new info.
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host1_ip_address} = $host1_ip_address;
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host1_tcp_port} = $host1_tcp_ports;
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_ip_address} = $host2_ip_address;
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_tcp_port} = $host2_tcp_ports;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host1_ip_address" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host1_ip_address},
"s2:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host1_tcp_port" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host1_tcp_port},
"s3:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host2_ip_address" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_ip_address},
"s4:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host2_tcp_port" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_tcp_port},
}});
my $peer = "";
if (($host1_name eq $local_short_host_name) or ($host1_name eq $local_host_name))
{
# Our peer is host2. Is the protocol C? If so, this can't be proxy.
$peer = $host2_name;
my $peer_protocol = $anvil->data->{new}{resource}{$resource}{peer}{$peer}{protocol};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:peer" => $peer,
"s2:peer_protocol" => $peer_protocol,
}});
next if uc($peer_protocol) eq "C";
# Still here? Then this is a proxy connection, update the ports and IP
$anvil->data->{new}{resource}{$resource}{peer}{$peer}{peer_ip_address} = $host2_ip_address;
$anvil->data->{new}{resource}{$resource}{peer}{$peer}{tcp_port} = $host1_tcp_ports; # Store our ports.
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:new::resource::${resource}::peer::${peer}::peer_ip_address" => $anvil->data->{new}{resource}{$resource}{peer}{$peer}{peer_ip_address},
"s2:new::resource::${resource}::peer::${peer}::tcp_port" => $anvil->data->{new}{resource}{$resource}{peer}{$peer}{tcp_port},
}});
}
else
{
# Our peer is host1, Is the protocol C? If so, this can't be proxy.
$peer = $host1_name;
my $peer_protocol = $anvil->data->{new}{resource}{$resource}{peer}{$peer}{protocol};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:peer" => $peer,
"s2:peer_protocol" => $peer_protocol,
}});
next if uc($peer_protocol) eq "C";
# Still here? Then this is a proxy connection, update the ports and IP
$anvil->data->{new}{resource}{$resource}{peer}{$peer}{peer_ip_address} = $host1_ip_address;
$anvil->data->{new}{resource}{$resource}{peer}{$peer}{tcp_port} = $host2_tcp_ports; # Store out ports
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:new::resource::${resource}::peer::${peer}::peer_ip_address" => $anvil->data->{new}{resource}{$resource}{peer}{$peer}{peer_ip_address},
"s2:new::resource::${resource}::peer::${peer}::tcp_port" => $anvil->data->{new}{resource}{$resource}{peer}{$peer}{tcp_port},
}});
}
}
}
}
return(0);
}
=head2 get_devices
This finds all of the configured '/dev/drbdX' devices and maps them to their resource names.
Parameters;
=head3 anvil_uuid (optional)
If set, the C<< drbdadm dump-xml >> is not called, instead the most recent version as recorded in C<< scan_drbd -> scan_drbd_common_xml >> is loaded from one of the hosts.
=head3 password (optional)
This is the password to use when connecting to a remote machine. If not set, but C<< target >> is, an attempt to connect without a password will be made.
=head3 port (optional)
This is the TCP port to use when connecting to a remote machine. If not set, but C<< target >> is, C<< 22 >> will be used.
=head3 remote_user (optional, default 'root')
If C<< target >> is set, this will be the user we connect to the remote machine as.
=head3 target (optional)
This is the IP or host name of the machine to read the version of. If this is not set, the local system's version is checked.
=cut
sub get_devices
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->get_devices()" }});
my $anvil_uuid = defined $parameter->{anvil_uuid} ? $parameter->{anvil_uuid} : "";
my $password = defined $parameter->{password} ? $parameter->{password} : "";
my $port = defined $parameter->{port} ? $parameter->{port} : "";
my $remote_user = defined $parameter->{remote_user} ? $parameter->{remote_user} : "root";
my $target = defined $parameter->{target} ? $parameter->{target} : "";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
anvil_uuid => $anvil_uuid,
password => $anvil->Log->is_secure($password),
port => $port,
remote_user => $remote_user,
target => $target,
}});
# If we've got an anvil_uuid, search for the drbd common XML from the database.
my $host = $anvil->Get->short_host_name;
my $output = "";
if ($anvil_uuid)
{
if (not exists $anvil->data->{anvils}{anvil_uuid}{$anvil_uuid})
{
$anvil->Database->get_anvils({debug => $debug});
if (not exists $anvil->data->{anvils}{anvil_uuid}{$anvil_uuid})
{
# Failed to find the Anvil! data.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0360", variables => { anvil_uuid => $anvil_uuid }});
return("!!error!!");
}
}
my $node1_host_uuid = $anvil->data->{anvils}{anvil_uuid}{$anvil_uuid}{anvil_node1_host_uuid};
my $node2_host_uuid = $anvil->data->{anvils}{anvil_uuid}{$anvil_uuid}{anvil_node2_host_uuid};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
node1_host_uuid => $node1_host_uuid,
node2_host_uuid => $node2_host_uuid,
}});
my $query = "
SELECT
scan_drbd_common_xml
FROM
scan_drbd
WHERE
scan_drbd_host_uuid = ".$anvil->Database->quote($node1_host_uuid)."
OR
scan_drbd_host_uuid = ".$anvil->Database->quote($node2_host_uuid)."
ORDER BY modified_date DESC
LIMIT 1
;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { query => $query }});
my $results = $anvil->Database->query({query => $query, source => $THIS_FILE, line => __LINE__});
my $count = @{$results};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
results => $results,
count => $count,
}});
if (not $count)
{
# Nothing found
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0361", variables => { anvil_uuid => $anvil_uuid }});
return("!!error!!");
}
$output = $results->[0]->[0];
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { output => $output }});
}
else
{
# Is this a local call or a remote call?
my $shell_call = $anvil->data->{path}{exe}{drbdadm}." dump-xml";
if ($anvil->Network->is_local({host => $target}))
{
# Local.
($output, $anvil->data->{drbd}{'drbdadm-xml'}{return_code}) = $anvil->System->call({shell_call => $shell_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
"drbd::drbdadm-xml::return_code" => $anvil->data->{drbd}{'drbdadm-xml'}{return_code},
}});
}
else
{
# Remote call.
($output, my $error, $anvil->data->{drbd}{'drbdadm-xml'}{return_code}) = $anvil->Remote->call({
debug => $debug,
shell_call => $shell_call,
target => $target,
port => $port,
password => $password,
remote_user => $remote_user,
});
$host = $target;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
host => $host,
error => $error,
output => $output,
"drbd::drbdadm-xml::return_code" => $anvil->data->{drbd}{'drbdadm-xml'}{return_code},
}});
}
}
# Clear the hash where we'll store the data.
if (exists $anvil->data->{drbd}{config}{$host})
{
delete $anvil->data->{drbd}{config}{$host};
}
local $@;
my $xml = XML::Simple->new();
my $dump_xml = "";
my $test = eval { $dump_xml = $xml->XMLin($output, KeyAttr => {}, ForceArray => 1) };
if (not $test)
{
chomp $@;
my $error = "[ Error ] - The was a problem parsing: [$output]. The error was:\n";
$error .= "===========================================================\n";
$error .= $@."\n";
$error .= "===========================================================\n";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { error => $error }});
$anvil->nice_exit({exit_code => 1});
}
#print Dumper $dump_xml;
$anvil->data->{drbd}{config}{$host}{'auto-promote'} = 0;
$anvil->data->{drbd}{config}{$host}{host} = "";
$anvil->data->{drbd}{config}{$host}{peer} = "";
$anvil->data->{drbd}{config}{$host}{nodes} = {};
foreach my $hash_ref (@{$dump_xml->{common}->[0]->{section}})
{
my $name = $hash_ref->{name};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { name => $name }});
if ($name eq "options")
{
foreach my $option_ref (@{$hash_ref->{option}})
{
my $variable = $option_ref->{name};
my $value = $option_ref->{value};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
variable => $variable,
value => $value,
}});
if ($variable eq "auto-promote")
{
$anvil->data->{drbd}{config}{$host}{'auto-promote'} = $value =~ /^y/i ? 1 : 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"drbd::config::${host}::auto-promote" => $anvil->data->{drbd}{config}{$host}{'auto-promote'},
}});
}
}
}
}
foreach my $hash_ref (@{$dump_xml->{resource}})
{
my $this_resource = $hash_ref->{name};
foreach my $connection_href (@{$hash_ref->{connection}})
{
foreach my $host_href (@{$connection_href->{host}})
{
my $this_host = $host_href->{name};
my $port = $host_href->{address}->[0]->{port};
my $ip_address = $host_href->{address}->[0]->{content};
$anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{connection}{$this_host}{ip_family} = $host_href->{address}->[0]->{family};
$anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{connection}{$this_host}{ip_address} = $host_href->{address}->[0]->{content};
$anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{connection}{$this_host}{port} = $port;
$anvil->data->{drbd}{config}{$host}{ip_addresses}{$ip_address} = $this_host;
$anvil->data->{drbd}{config}{$host}{tcp_ports}{$port} = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"drbd::config::${host}::resource::${this_resource}::connection::${this_host}::ip_family" => $anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{connection}{$this_host}{ip_family},
"drbd::config::${host}::resource::${this_resource}::connection::${this_host}::ip_address" => $anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{connection}{$this_host}{ip_address},
"drbd::config::${host}::resource::${this_resource}::connection::${this_host}::port" => $anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{connection}{$this_host}{port},
"drbd::config::${host}::ip_addresses::${ip_address}" => $anvil->data->{drbd}{config}{$host}{ip_addresses}{$ip_address},
"drbd::config::${host}::tcp_ports::${port}" => $anvil->data->{drbd}{config}{$host}{tcp_ports}{$port},
}});
}
foreach my $section_href (@{$connection_href->{section}})
{
my $section = $section_href->{name};
foreach my $option_href (@{$section_href->{option}})
{
my $variable = $option_href->{name};
$anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{section}{$section}{$variable} = $option_href->{value};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"drbd::config::${host}::resource::${this_resource}::section::${section}::${variable}" => $anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{section}{$section}{$variable},
}});
}
}
}
foreach my $host_href (@{$hash_ref->{host}})
{
### TODO: Handle external metadata
my $this_host = $host_href->{name};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
this_host => $this_host,
'Get->host_name' => $anvil->Get->host_name,
'Get->short_host_name' => $anvil->Get->short_host_name,
}});
if (($this_host eq $anvil->Get->host_name) or ($this_host eq $anvil->Get->short_host_name))
{
$anvil->data->{drbd}{config}{$host}{host} = $this_host;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { "drbd::config::${host}::host" => $anvil->data->{drbd}{config}{$host}{host} }});
}
foreach my $volume_href (@{$host_href->{volume}})
{
my $volume = $volume_href->{vnr};
my $drbd_path = $volume_href->{device}->[0]->{content};
my $lv_path = $volume_href->{disk}->[0];
my $by_res = "/dev/drbd/by-res/".$this_resource."/".$volume;
my $minor = $volume_href->{device}->[0]->{minor};
$anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{volume}{$volume}{drbd_path} = "/dev/drbd".$minor;
### TODO: Anything using these are broken as the values get rewritten and
### only store the last DRBD node's data. Switch to using the
### 'this_host' stored values below
$anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{volume}{$volume}{drbd_path_by_res} = $by_res;
$anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{volume}{$volume}{drbd_minor} = $minor;
$anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{volume}{$volume}{'meta-disk'} = $volume_href->{'meta-disk'}->[0];
$anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{volume}{$volume}{backing_lv} = $lv_path;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"drbd::config::${host}::resource::${this_resource}::volume::${volume}::drbd_path" => $anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{volume}{$volume}{drbd_path},
"drbd::config::${host}::resource::${this_resource}::volume::${volume}::drbd_path_by_res" => $anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{volume}{$volume}{drbd_path_by_res},
"drbd::config::${host}::resource::${this_resource}::volume::${volume}::drbd_minor" => $anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{volume}{$volume}{drbd_minor},
"drbd::config::${host}::resource::${this_resource}::volume::${volume}::meta-disk" => $anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{volume}{$volume}{'meta-disk'},
"drbd::config::${host}::resource::${this_resource}::volume::${volume}::backing_lv" => $anvil->data->{drbd}{config}{$host}{resource}{$this_resource}{volume}{$volume}{backing_lv},
}});
if (($anvil->data->{drbd}{config}{$host}{host}) && ($anvil->data->{drbd}{config}{$host}{host} eq $this_host))
{
$anvil->data->{drbd}{config}{$host}{by_res}{$by_res}{on} = $lv_path;
$anvil->data->{drbd}{config}{$host}{by_res}{$by_res}{resource} = $this_resource;
$anvil->data->{drbd}{config}{$host}{drbd_path}{$drbd_path}{on} = $lv_path;
$anvil->data->{drbd}{config}{$host}{drbd_path}{$drbd_path}{resource} = $this_resource;
$anvil->data->{drbd}{config}{$host}{lv_path}{$lv_path}{under} = $drbd_path;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"drbd::config::${host}::by_res::${by_res}::on" => $anvil->data->{drbd}{config}{$host}{by_res}{$by_res}{on},
"drbd::config::${host}::by_res::${by_res}::resource" => $anvil->data->{drbd}{config}{$host}{by_res}{$by_res}{resource},
"drbd::config::${host}::drbd_path::${drbd_path}::on" => $anvil->data->{drbd}{config}{$host}{drbd_path}{$drbd_path}{on},
"drbd::config::${host}::drbd_path::${drbd_path}::resource" => $anvil->data->{drbd}{config}{$host}{drbd_path}{$drbd_path}{resource},
"drbd::config::${host}::lv_path::${lv_path}::under" => $anvil->data->{drbd}{config}{$host}{lv_path}{$lv_path}{under},
}});
}
# If this is ourself, store the resource name and backing LV in the 'by-res'
# hash.
if ($anvil->Network->is_local({host => $this_host}))
{
$anvil->data->{drbd}{config}{$host}{'by-res'}{$by_res}{resource} = $this_resource;
$anvil->data->{drbd}{config}{$host}{'by-res'}{$by_res}{backing_lv} = $lv_path;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"drbd::config::${host}::by-res::${by_res}::resource" => $anvil->data->{drbd}{config}{$host}{'by-res'}{$by_res}{resource},
"drbd::config::${host}::by-res::${by_res}::backing_lv" => $anvil->data->{drbd}{config}{$host}{'by-res'}{$by_res}{backing_lv},
}});
}
# This records the backing LV data for all hosts in this resource.
$anvil->data->{drbd}{drbd_node}{$this_host}{config}{resource}{$this_resource}{volume}{$volume}{drbd_path} = "/dev/drbd".$minor;
$anvil->data->{drbd}{drbd_node}{$this_host}{config}{resource}{$this_resource}{volume}{$volume}{drbd_path_by_res} = $by_res;
$anvil->data->{drbd}{drbd_node}{$this_host}{config}{resource}{$this_resource}{volume}{$volume}{drbd_minor} = $minor;
$anvil->data->{drbd}{drbd_node}{$this_host}{config}{resource}{$this_resource}{volume}{$volume}{'meta-disk'} = $volume_href->{'meta-disk'}->[0];
$anvil->data->{drbd}{drbd_node}{$this_host}{config}{resource}{$this_resource}{volume}{$volume}{backing_lv} = $lv_path;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"drbd::drbd_node::${this_host}::config::resource::${this_resource}::volume::${volume}::drbd_path" => $anvil->data->{drbd}{drbd_node}{$this_host}{config}{resource}{$this_resource}{volume}{$volume}{drbd_path},
"drbd::drbd_node::${this_host}::config::resource::${this_resource}::volume::${volume}::drbd_path_by_res" => $anvil->data->{drbd}{drbd_node}{$this_host}{config}{resource}{$this_resource}{volume}{$volume}{drbd_path_by_res},
"drbd::drbd_node::${this_host}::config::resource::${this_resource}::volume::${volume}::drbd_minor" => $anvil->data->{drbd}{drbd_node}{$this_host}{config}{resource}{$this_resource}{volume}{$volume}{drbd_minor},
"drbd::drbd_node::${this_host}::config::resource::${this_resource}::volume::${volume}::meta-disk" => $anvil->data->{drbd}{drbd_node}{$this_host}{config}{resource}{$this_resource}{volume}{$volume}{'meta-disk'},
"drbd::drbd_node::${this_host}::config::resource::${this_resource}::volume::${volume}::backing_lv" => $anvil->data->{drbd}{drbd_node}{$this_host}{config}{resource}{$this_resource}{volume}{$volume}{backing_lv},
}});
}
}
### NOTE: Connections are listed as 'host A <-> Host B (options), 'host A <-> Host C
### (options) and 'host B <-> Host C (options)'. So first we see which entry has
### fencing, and ignore the others. The one with real fencing, we figure out which is
### us (if any) and the other has to be the peer.
# Find my peer, if I am myself a node.
if (($anvil->data->{drbd}{config}{$host}{host}) && (not $anvil->data->{drbd}{config}{$host}{peer}))
{
#print Dumper $hash_ref->{connection};
foreach my $hash_ref (@{$hash_ref->{connection}})
{
# Look in 'section' for fencing data.
my $fencing = "";
my $protocol = "";
#print Dumper $hash_ref;
foreach my $section_ref (@{$hash_ref->{section}})
{
next if $section_ref->{name} ne "net";
foreach my $option_ref (@{$section_ref->{option}})
{
if ($option_ref->{name} eq "fencing")
{
$fencing = $option_ref->{value};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { fencing => $fencing }});
}
elsif ($option_ref->{name} eq "protocol")
{
$protocol = $option_ref->{value};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { protocol => $protocol }});
}
}
}
# If the protocol is 'resource-and-stonith', we care. Otherwise it's a
# connection involving DR and we don't.
next if $fencing ne "resource-and-stonith";
# If we're still alive, this should be our connection to our peer.
foreach my $host_ref (@{$hash_ref->{host}})
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"drbd::config::${host}::host" => $anvil->data->{drbd}{config}{$host}{host},
"host_ref->name" => $host_ref->{name},
}});
next if $host_ref->{name} eq $anvil->data->{drbd}{config}{$host}{host};
# Found the peer.
$anvil->data->{drbd}{config}{$host}{peer} = $host_ref->{name};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { "drbd::config::${host}::peer" => $anvil->data->{drbd}{config}{$host}{peer} }});
}
}
}
}
return(0);
}
=head2 get_next_resource
This returns the next free DRBD minor number and the next free TCP port. The minor number and TCP port returned are ones found to be free on both/all machines in Anvil! system. As such, the returned values may skip values free on any given system.
If a resource name is given, then the caller can either return an error if the name matches (useful for name conflict checks) or return the first (lowest) minor number and TCP used by the resource.
my ($free_minor, $free_port) = $anvil->DRBD->get_next_resource({anvil_uuid => "a5ae5242-e9d3-46c9-9ce8-306855aa56db"})
If there is a problem, two empty strings will be returned.
B<< Note >>: Deleted resources, volumes and peers are ignored! As such, a minor or TCP port that used to be used by deleted resource can be returned.
Parameters;
=head3 anvil_uuid (optional, default 'Cluster->get_anvil_uuid')
This is the Anvil! in which we're looking for the next free resources. It's required, but generally it doesn't need to be specified as we can find it via C<< Cluster->get_anvil_uuid() >>.
=head3 dr_tcp_ports (optional, default '0')
If set, the 'free_port' returned will be a comma-separated pair of TCP ports. This is meant to help find two TCP ports needed to connect a resource from both nodes to a DR host.
=head3 long_throw_ports (optional, default '0')
If set, the 'free_port' returned will be a comma-separated list of seven TCP ports needed for a full B<< Long Throw >> configuration.
=head3 resource_name (optional)
If this is set, and the resource is found to already exist, the first DRBD minor number and first used TCP port are returned. Alternatively, if C<< force_unique >> is set to C<< 1 >>, and the resource is found to exist, empty strings are returned.
=head3 force_unique (optional, default '0')
This can be used to cause this method to return an error if C<< resource_name >> is also set and the resource is found to already exist.
=cut
sub get_next_resource
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->get_next_resource()" }});
### TODO: Cache results in the states or variables table and don't reuse ports given out for five
### minutes. If the user batches a series of calls, TCP ports / minor numbers could be offered
### multiple times.
my $anvil_uuid = defined $parameter->{anvil_uuid} ? $parameter->{anvil_uuid} : "";
my $dr_tcp_ports = defined $parameter->{dr_tcp_ports} ? $parameter->{dr_tcp_ports} : "";
my $long_throw_ports = defined $parameter->{long_throw_ports} ? $parameter->{long_throw_ports} : "";
my $resource_name = defined $parameter->{resource_name} ? $parameter->{resource_name} : "";
my $force_unique = defined $parameter->{force_unique} ? $parameter->{force_unique} : 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
anvil_uuid => $anvil_uuid,
dr_tcp_ports => $dr_tcp_ports,
long_throw_ports => $long_throw_ports,
resource_name => $resource_name,
force_unique => $force_unique,
}});
# If we weren't passed an anvil_uuid, see if we can find one locally
if (not $anvil_uuid)
{
$anvil_uuid = $anvil->Cluster->get_anvil_uuid({debug => $debug});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { anvil_uuid => $anvil_uuid }});
}
if (not $anvil_uuid)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "log_0020", variables => { method => "DRBD->get_next_resource()", parameter => "anvil_uuid" }});
return("", "");
}
$anvil->Database->get_anvils({debug => $debug});
if (not exists $anvil->data->{anvils}{anvil_uuid}{$anvil_uuid})
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0162", variables => { anvil_uuid => $anvil_uuid }});
return("", "");
}
# Read in the resource information from both nodes. They _should_ be identical, but that's not 100%
# certain.
my $node1_host_uuid = $anvil->data->{anvils}{anvil_uuid}{$anvil_uuid}{anvil_node1_host_uuid};
my $node2_host_uuid = $anvil->data->{anvils}{anvil_uuid}{$anvil_uuid}{anvil_node2_host_uuid};
my $dr1_host_uuid = $anvil->data->{anvils}{anvil_uuid}{$anvil_uuid}{anvil_dr1_host_uuid};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
node1_host_uuid => $node1_host_uuid,
node2_host_uuid => $node2_host_uuid,
dr1_host_uuid => $dr1_host_uuid,
}});
my $query = "
SELECT
a.host_uuid,
a.host_name,
b.scan_drbd_resource_name,
c.scan_drbd_volume_number,
c.scan_drbd_volume_device_path,
c.scan_drbd_volume_device_minor,
d.scan_drbd_peer_host_name,
d.scan_drbd_peer_ip_address,
d.scan_drbd_peer_protocol,
d.scan_drbd_peer_fencing,
d.scan_drbd_peer_tcp_port
FROM
hosts a,
scan_drbd_resources b,
scan_drbd_volumes c,
scan_drbd_peers d
WHERE
a.host_uuid = b.scan_drbd_resource_host_uuid
AND
b.scan_drbd_resource_uuid = c.scan_drbd_volume_scan_drbd_resource_uuid
AND
c.scan_drbd_volume_uuid = d.scan_drbd_peer_scan_drbd_volume_uuid
AND
b.scan_drbd_resource_xml != 'DELETED'
AND
c.scan_drbd_volume_device_path != 'DELETED'
AND
d.scan_drbd_peer_connection_state != 'DELETED'
AND
(
scan_drbd_resource_host_uuid = ".$anvil->Database->quote($node1_host_uuid)."
OR
scan_drbd_resource_host_uuid = ".$anvil->Database->quote($node2_host_uuid)." ";
if ($dr1_host_uuid)
{
$query .= "
OR
scan_drbd_resource_host_uuid = ".$anvil->Database->quote($dr1_host_uuid)." ";
}
$query .= "
)
ORDER BY
b.scan_drbd_resource_name ASC,
c.scan_drbd_volume_device_minor ASC,
d.scan_drbd_peer_tcp_port ASC
;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { query => $query }});
my $results = $anvil->Database->query({query => $query, source => $THIS_FILE, line => __LINE__});
my $count = @{$results};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
results => $results,
count => $count,
}});
foreach my $row (@{$results})
{
# I don't really need most of this, but it helps with debugging
my $host_uuid = $row->[0];
my $host_name = $row->[1];
my $scan_drbd_resource_name = $row->[2];
my $scan_drbd_volume_number = $row->[3];
my $scan_drbd_volume_device_path = $row->[4];
my $scan_drbd_volume_device_minor = $row->[5];
my $scan_drbd_peer_host_name = $row->[6];
my $scan_drbd_peer_ip_address = $row->[7];
my $scan_drbd_peer_protocol = $row->[8];
my $scan_drbd_peer_fencing = $row->[9];
my $scan_drbd_peer_tcp_port = $row->[10];
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:host_uuid' => $host_uuid,
's2:host_name' => $host_name,
's3:scan_drbd_resource_name' => $scan_drbd_resource_name,
's4:scan_drbd_volume_number' => $scan_drbd_volume_number,
's5:scan_drbd_volume_device_path' => $scan_drbd_volume_device_path,
's6:scan_drbd_volume_device_minor' => $scan_drbd_volume_device_minor,
's7:scan_drbd_peer_host_name' => $scan_drbd_peer_host_name,
's8:scan_drbd_peer_ip_address' => $scan_drbd_peer_ip_address,
's9:scan_drbd_peer_protocol' => $scan_drbd_peer_protocol,
's10:scan_drbd_peer_fencing' => $scan_drbd_peer_fencing,
's11:scan_drbd_peer_tcp_port' => $scan_drbd_peer_tcp_port,
}});
$anvil->data->{drbd}{used_resources}{minor}{$scan_drbd_volume_device_minor}{used} = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"drbd::used_resources::minor::${scan_drbd_volume_device_minor}::used" => $anvil->data->{drbd}{used_resources}{minor}{$scan_drbd_volume_device_minor}{used},
}});
# DRBD proxy uses three ports per connection. This handles that, and still works fine for
# single TCP ports.
foreach my $tcp_port (split/,/, $scan_drbd_peer_tcp_port)
{
$anvil->data->{drbd}{used_resources}{tcp_port}{$tcp_port}{used} = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"drbd::used_resources::tcp_port::${tcp_port}::used" => $anvil->data->{drbd}{used_resources}{tcp_port}{$tcp_port}{used},
}});
}
if (($resource_name) && ($scan_drbd_resource_name eq $resource_name))
{
# Found the resource the user was asking for.
if ($force_unique)
{
# Error out.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, priority => 'err', key => "error_0237", variables => { resource_name => $resource_name }});
return("", "");
}
else
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0592", variables => { resource_name => $resource_name }});
return($scan_drbd_volume_device_minor, $scan_drbd_peer_tcp_port);
}
}
}
# If I'm here, We'll look for the next minor number for this host.
my $looking = 1;
my $free_minor = 0;
while($looking)
{
if (exists $anvil->data->{drbd}{used_resources}{minor}{$free_minor})
{
$free_minor++;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { free_minor => $free_minor }});
}
else
{
$looking = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { looking => $looking }});
}
}
# I need to find the next free TCP port.
$looking = 1;
my $check_port = 7788;
my $free_ports = "";
my $tcp_pair = "";
my $proxy_list = "";
my $port_count = 0;
my $neeed_ports = 1;
if ($long_throw_ports)
{
$neeed_ports = 7;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { neeed_ports => $neeed_ports }});
}
elsif ($dr_tcp_ports)
{
$neeed_ports = 3;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { neeed_ports => $neeed_ports }});
}
while($looking)
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { check_port => $check_port }});
if ((exists $anvil->data->{drbd}{used_resources}{tcp_port}{$check_port}) &&
($anvil->data->{drbd}{used_resources}{tcp_port}{$check_port}{used}))
{
$check_port++;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { check_port => $check_port }});
next;
}
else
{
# This is a free port.
$free_ports .= $check_port.",";
$port_count++;
$check_port++;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
free_ports => $free_ports,
port_count => $port_count,
}});
if ($port_count >= $neeed_ports)
{
$looking = 0;
$free_ports =~ s/,$//;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
looking => $looking,
free_ports => $free_ports,
}});
}
}
}
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
free_minor => $free_minor,
free_ports => $free_ports,
}});
return($free_minor, $free_ports);
}
=head2 get_status
This parses the DRBD status on the local or remote system. The data collected is stored in the following hashes;
drbd::status::<host_name>::resource::<resource_name>::{ap-in-flight,congested,connection-state,peer-node-id,rs-in-flight}
drbd::status::<host_name>::resource::<resource_name>::connection::<peer_host_name>::volume::<volume>::{has-online-verify-details,has-sync-details,out-of-sync,peer-client,peer-disk-state,pending,percent-in-sync,received,replication-state,resync-suspended,sent,unacked}
If the volume is resyncing, these additional values will be set:
drbd::status::<host_name>::resource::<resource_name>::connection::<peer_host_name>::volume::<volume>::{db-dt MiB-s,db0-dt0 MiB-s,db1-dt1 MiB-s,estimated-seconds-to-finish,percent-resync-done,rs-db0-sectors,rs-db1-sectors,rs-dt-start-ms,rs-dt0-ms,rs-dt1-ms,rs-failed,rs-paused-ms,rs-same-csum,rs-total,want}
drbd::status::<host_name>::resource::<resource>::devices::volume::<volume>::{al-writes,bm-writes,client,disk-state,lower-pending,minor,quorum,read,size,upper-pending,written}
If any data for the host was stored in a previous call, it will be deleted before the new data is collected and stored.
Parameters;
=head3 password (optional)
This is the password to use when connecting to a remote machine. If not set, but C<< target >> is, an attempt to connect without a password will be made.
=head3 port (optional)
This is the TCP port to use when connecting to a remote machine. If not set, but C<< target >> is, C<< 22 >> will be used.
=head3 remote_user (optional, default 'root')
If C<< target >> is set, this will be the user we connect to the remote machine as.
=head3 target (optional)
This is the IP or host name of the machine to read the version of. If this is not set, the local system's version is checked.
=cut
# NOTE: the version is set in anvil.spec by sed'ing the release and arch onto anvil.version in anvil-core's %post
sub get_status
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->get_status()" }});
my $password = defined $parameter->{password} ? $parameter->{password} : "";
my $port = defined $parameter->{port} ? $parameter->{port} : "";
my $remote_user = defined $parameter->{remote_user} ? $parameter->{remote_user} : "root";
my $target = defined $parameter->{target} ? $parameter->{target} : "";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
password => $anvil->Log->is_secure($password),
port => $port,
remote_user => $remote_user,
target => $target,
}});
# Is this a local call or a remote call?
my $shell_call = $anvil->data->{path}{exe}{drbdsetup}." status --json";
my $output = "";
my $host = $anvil->Get->short_host_name();
if ($anvil->Network->is_local({host => $target}))
{
# Local.
($output, $anvil->data->{drbd}{status}{$host}{return_code}) = $anvil->System->call({shell_call => $shell_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
"drbd::status::${host}::return_code" => $anvil->data->{drbd}{status}{$host}{return_code},
}});
}
else
{
# Remote call.
$host = $target;
($output, my $error, $anvil->data->{drbd}{status}{$host}{return_code}) = $anvil->Remote->call({
debug => $debug,
shell_call => $shell_call,
target => $target,
port => $port,
password => $password,
remote_user => $remote_user,
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
error => $error,
output => $output,
"drbd::status::${host}::return_code" => $anvil->data->{drbd}{status}{$host}{return_code},
}});
}
# Clear the hash where we'll store the data.
if (exists $anvil->data->{drbd}{status}{$host})
{
delete $anvil->data->{drbd}{status}{$host};
}
# Parse the output.
my $json = JSON->new->allow_nonref;
my $drbd_status = $json->decode($output);
foreach my $hash_ref (@{$drbd_status})
{
my $resource = $hash_ref->{name};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { resource => $resource }});
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{role} = $hash_ref->{role};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{'node-id'} = $hash_ref->{'node-id'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{suspended} = $hash_ref->{suspended};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{'write-ordering'} = $hash_ref->{'write-ordering'};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"drbd::status::${host}::resource::${resource}::role" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{role},
"drbd::status::${host}::resource::${resource}::node-id" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{'node-id'},
"drbd::status::${host}::resource::${resource}::suspended" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{suspended},
"drbd::status::${host}::resource::${resource}::write-ordering" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{'write-ordering'},
}});
my $count_i = @{$hash_ref->{connections}};
for (my $i = 0; $i < $count_i; $i++)
{
#print "i: [$i]\n";
my $peer_name = $hash_ref->{connections}->[$i]->{name};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { peer_name => $peer_name }});
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{'ap-in-flight'} = $hash_ref->{connections}->[$i]->{'ap-in-flight'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{congested} = $hash_ref->{connections}->[$i]->{congested};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{'connection-state'} = $hash_ref->{connections}->[$i]->{'connection-state'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{'peer-node-id'} = $hash_ref->{connections}->[$i]->{'peer-node-id'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{'rs-in-flight'} = $hash_ref->{connections}->[$i]->{'rs-in-flight'};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::ap-in-flight" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{'ap-in-flight'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::congested" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{congested},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::connection-state" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{'connection-state'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::peer-node-id" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{'peer-node-id'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::rs-in-flight" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{'rs-in-flight'},
}});
my $count_j = @{$hash_ref->{connections}->[$i]->{peer_devices}};
for (my $j = 0; $j < $count_j; $j++)
{
my $volume = $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{volume};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { volume => $volume }});
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'has-online-verify-details'} = $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'has-online-verify-details'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'has-sync-details'} = $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'has-sync-details'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'out-of-sync'} = $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'out-of-sync'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'peer-client'} = $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'peer-client'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'peer-disk-state'} = $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'peer-disk-state'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{pending} = $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{pending};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'percent-in-sync'} = $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'percent-in-sync'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{received} = $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{received};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'replication-state'} = $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'replication-state'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'resync-suspended'} = $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'resync-suspended'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{sent} = $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{sent};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{unacked} = $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{unacked};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::has-online-verify-details" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'has-online-verify-details'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::has-sync-details" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'has-sync-details'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::out-of-sync" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'out-of-sync'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::peer-client" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'peer-client'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::peer-disk-state" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'peer-disk-state'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::pending" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{pending},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::percent-in-sync" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'percent-in-sync'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::received" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{received},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::replication-state" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'replication-state'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::resync-suspended" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'resync-suspended'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::sent" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{sent},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::unacked" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{unacked},
}});
### NOTE: 03:54 < lge> t0, t1, ...: time stamps. db/dt (0,1,...): delta blocks per delta time: the "estimated average" resync rate in kB/s from tX to now.
# 03:57 < lge> time stamps and block gauges are send by the module, the rate is then calculated by the tool, so if there are funny numbers, you have to tool closely if the data from the module is already bogus, or if just the calculation in the tool is off.
# These are set during a resync
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'db-dt MiB-s'} = defined $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'db/dt [MiB/s]'} ? $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'db/dt [MiB/s]'} : 0;
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'db0-dt0 MiB-s'} = defined $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'db0/dt0 [MiB/s]'} ? $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'db0/dt0 [MiB/s]'} : 0;
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'db1-dt1 MiB-s'} = defined $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'db1/dt1 [MiB/s]'} ? $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'db1/dt1 [MiB/s]'} : 0;
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'estimated-seconds-to-finish'} = defined $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'estimated-seconds-to-finish'} ? $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'estimated-seconds-to-finish'} : 0;
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'percent-resync-done'} = defined $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'percent-resync-done'} ? $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'percent-resync-done'} : 100;
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-db0-sectors'} = defined $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-db0-sectors'} ? $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-db0-sectors'} : 0;
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-db1-sectors'} = defined $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-db1-sectors'} ? $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-db1-sectors'} : 0;
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-dt-start-ms'} = defined $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-dt-start-ms'} ? $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-dt-start-ms'} : 0;
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-dt0-ms'} = defined $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-dt0-ms'} ? $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-dt0-ms'} : 0;
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-dt1-ms'} = defined $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-dt1-ms'} ? $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-dt1-ms'} : 0;
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-failed'} = defined $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-failed'} ? $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-failed'} : 0;
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-paused-ms'} = defined $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-paused-ms'} ? $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-paused-ms'} : 0;
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-same-csum'} = defined $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-same-csum'} ? $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-same-csum'} : 0;
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-total'} = defined $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-total'} ? $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{'rs-total'} : 0;
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{want} = defined $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{want} ? $hash_ref->{connections}->[$i]->{peer_devices}->[$j]->{want} : 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::db-dt MiB-s" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'db-dt MiB-s'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::db0-dt0 MiB-s" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'db0-dt0 MiB-s'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::db1-dt1 MiB-s" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'db1-dt1 MiB-s'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::estimated-seconds-to-finish" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'estimated-seconds-to-finish'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::percent-resync-done" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'percent-resync-done'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::rs-db0-sectors" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-db0-sectors'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::rs-db1-sectors" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-db1-sectors'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::rs-dt-start-ms" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-dt-start-ms'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::rs-dt0-ms" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-dt0-ms'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::rs-dt1-ms" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-dt1-ms'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::rs-failed" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-failed'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::rs-paused-ms" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-paused-ms'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::rs-same-csum" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-same-csum'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::rs-total" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{'rs-total'},
"drbd::status::${host}::resource::${resource}::connection::${peer_name}::volume::${volume}::want" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{connection}{$peer_name}{volume}{$volume}{want},
}});
}
}
$count_i = @{$hash_ref->{devices}};
#print "hash_ref->{devices}: [".$hash_ref->{devices}."], count_i: [$count_i]\n";
for (my $i = 0; $i < $count_i; $i++)
{
#print "i: [$i], [".$hash_ref->{devices}->[$i]."]\n";
my $volume = $hash_ref->{devices}->[$i]->{volume};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { volume => $volume }});
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{'al-writes'} = $hash_ref->{devices}->[$i]->{'al-writes'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{'bm-writes'} = $hash_ref->{devices}->[$i]->{'bm-writes'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{client} = $hash_ref->{devices}->[$i]->{client};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{'disk-state'} = $hash_ref->{devices}->[$i]->{'disk-state'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{'lower-pending'} = $hash_ref->{devices}->[$i]->{'lower-pending'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{minor} = $hash_ref->{devices}->[$i]->{minor};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{quorum} = $hash_ref->{devices}->[$i]->{quorum};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{'read'} = $hash_ref->{devices}->[$i]->{'read'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{size} = $hash_ref->{devices}->[$i]->{size};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{'upper-pending'} = $hash_ref->{devices}->[$i]->{'upper-pending'};
$anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{written} = $hash_ref->{devices}->[$i]->{written};
* THe get_cpu endpoint was completed. * The get_mmeory endpoint was completed. * The get_replicated_storage endpoint was completed, though it requires testing and likely has issues. To prepare for the get_status endpoint work, I needed to update ScanCore and modules to track the host_status. This commit contains the work needed for this. * Updated ScanCore->post_scan_analysis_striker() to use configured fence devices (except PDUs) to check if a target host is off or on, in there is no host_ipmi interface. In all cases, if a machine can be confirmed on or off, the host_status is now updated. * To support the above fence based power checks, updated scan-cluster to store the on-disk CIB in the new scan_cluster -> scan_cluster_cib colume. * Updated ScanCore->parse_cib() to map stonith primitive IDs to fence agents. Updated ->parse_crm_mon() to not call if the executable doesn't exist to avoid unhelpful error messages in the logs when called from a Striker. * Update DRBD->gather_data() to get the size data from /sys/block/drbd<minor>/size' x '/sys/block/drbd<minor>/queue/logical_block_size so it works when a device is Secondary (and can't be promoted). * Updated Database->get_hosts_info() to record the short host name as well as the stored host name. Created ->update_host_status() as a wrapper to ->insert_or_update_hosts() that only updates the host status. * Updated anvil-join-anvil to disabled ksm and ksmtuned daemons. * Updated scancore and anvil-daemon to set the host_status to 'online' on startup. Signed-off-by: Digimer <digimer@alteeve.ca>
4 years ago
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"drbd::status::${host}::resource::${resource}::devices::volume::${volume}::al-writes" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{'al-writes'},
"drbd::status::${host}::resource::${resource}::devices::volume::${volume}::bm-writes" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{'bm-writes'},
"drbd::status::${host}::resource::${resource}::devices::volume::${volume}::client" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{client},
"drbd::status::${host}::resource::${resource}::devices::volume::${volume}::disk-state" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{'disk-state'},
"drbd::status::${host}::resource::${resource}::devices::volume::${volume}::lower-pending" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{'lower-pending'},
"drbd::status::${host}::resource::${resource}::devices::volume::${volume}::minor" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{minor},
"drbd::status::${host}::resource::${resource}::devices::volume::${volume}::quorum" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{quorum},
"drbd::status::${host}::resource::${resource}::devices::volume::${volume}::read" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{'read'},
"drbd::status::${host}::resource::${resource}::devices::volume::${volume}::size" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{size},
"drbd::status::${host}::resource::${resource}::devices::volume::${volume}::upper-pending" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{'upper-pending'},
"drbd::status::${host}::resource::${resource}::devices::volume::${volume}::written" => $anvil->data->{drbd}{status}{$host}{resource}{$resource}{devices}{volume}{$volume}{written},
}});
}
# foreach my $key (sort {$a cmp $b} keys %{$hash_ref})
# {
# next if $key eq "name";
# next if $key eq "role";
# next if $key eq "node-id";
# next if $key eq "suspended";
# next if $key eq "write-ordering";
# next if $key eq "connections";
# next if $key eq "devices";
# print "Key: [$key] -> [".$hash_ref->{$key}."]\n";
# }
}
return(0);
}
=head2 manage_resource
This takes a task, C<< up >>, C<< down >>, C<< primary >>, or C<< secondary >> and a resource name and acts on the request.
This returns the return code from the C<< drbdadm >> call. If C<< 255 >> is returned, then we did not get the actual return code from C<< drbdadm >>.
B<NOTE>: This just makes the call, it doesn't wait or watch for the action to actually finish.
Parameters;
=head3 password (optional)
This is the password to use when connecting to a remote machine. If not set, but C<< target >> is, an attempt to connect without a password will be made.
=head3 port (optional)
This is the TCP port to use when connecting to a remote machine. If not set, but C<< target >> is, C<< 22 >> will be used.
=head3 remote_user (optional, default 'root')
=head3 resource (required)
This is the name of the resource being acted upon.
=head3 task (required)
This is the action to take. Valid tasks are: C<< up >>, C<< down >>, C<< primary >>, and C<< secondary >>.
If C<< target >> is set, this will be the user we connect to the remote machine as.
=head3 target (optional)
This is the IP or host name of the machine to read the version of. If this is not set, the local system's version is checked.
=cut
sub manage_resource
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->manage_resource()" }});
my $password = defined $parameter->{password} ? $parameter->{password} : "";
my $port = defined $parameter->{port} ? $parameter->{port} : "";
my $remote_user = defined $parameter->{remote_user} ? $parameter->{remote_user} : "root";
my $resource = defined $parameter->{resource} ? $parameter->{resource} : "";
my $task = defined $parameter->{task} ? $parameter->{task} : "";
my $target = defined $parameter->{target} ? $parameter->{target} : "";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
password => $anvil->Log->is_secure($password),
port => $port,
remote_user => $remote_user,
resource => $resource,
task => $task,
target => $target,
}});
if (not $resource)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "log_0020", variables => { method => "DRBD->manage_resource()", parameter => "resource" }});
return(1);
}
if (not $task)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "log_0020", variables => { method => "DRBD->manage_resource()", parameter => "task" }});
return(1);
}
### TODO: When taking down a resource, check to see if any machine is SyncTarget and take it/them
### down first. See anvil-rename-server -> verify_server_is_off() for the logic.
### TODO: Sanity check the resource name and task requested.
### NOTE: For an unknown reason, sometimes a resource is left with allow-two-primary enabled. This
### can block startup, so to be safe, during start, we'll call adjust
if ($task eq "up")
{
# This generally brings up the resource
my $shell_call = $anvil->data->{path}{exe}{drbdadm}." adjust ".$resource;
my $output = "";
my $return_code = 255;
if ($anvil->Network->is_local({host => $target}))
{
# Local.
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { shell_call => $shell_call }});
($output, $return_code) = $anvil->System->call({shell_call => $shell_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
}
else
{
# Remote call.
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { shell_call => $shell_call }});
($output, my $error, $return_code) = $anvil->Remote->call({
debug => $debug,
shell_call => $shell_call,
target => $target,
port => $port,
password => $password,
remote_user => $remote_user,
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
error => $error,
output => $output,
return_code => $return_code,
}});
}
}
# If we 'adjust'ed above, this will likely complain that the backing disk already exists, and that's
# fine.
my $shell_call = $anvil->data->{path}{exe}{drbdadm}." ".$task." ".$resource;
my $output = "";
my $return_code = 255;
if ($anvil->Network->is_local({host => $target}))
{
# Local.
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { shell_call => $shell_call }});
($output, $return_code) = $anvil->System->call({shell_call => $shell_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
}
else
{
# Remote call.
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { shell_call => $shell_call }});
($output, my $error, $return_code) = $anvil->Remote->call({
debug => $debug,
shell_call => $shell_call,
target => $target,
port => $port,
password => $password,
remote_user => $remote_user,
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
error => $error,
output => $output,
return_code => $return_code,
}});
}
return($return_code);
}
=head2 parse_resource
This takes the XML from a specific DRBD resource and parses it.
Parameters;
=head3 xml (required)
This is the XML to parse, generally as stored in the C<< scan_drbd_resources >> -> C<< scan_drbd_resource_xml >>.
=cut
sub parse_resource
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->parse_resource()" }});
my $xml = defined $parameter->{xml} ? $parameter->{xml} : "";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
xml => $xml,
}});
if (not $xml)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "log_0020", variables => { method => "DRBD->parse_resource()", parameter => "xml" }});
return("!!error!!");
}
local $@;
my $dom = eval { XML::LibXML->load_xml(string => $xml); };
if ($@)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "error_0253", variables => {
xml => $xml,
error => $@,
}});
return(1);
}
else
{
# Successful parse!
=cut
<resource name="srv01-fs37" conf-file-line="/etc/drbd.d/srv01-fs37.res:2">
<host name="vm-a01n01">
<volume vnr="0">
<device minor="0">/dev/drbd_srv01-fs37_0</device>
<disk>/dev/cs_vm-a01n01/srv01-fs37_0</disk>
<meta-disk>internal</meta-disk>
</volume>
<volume vnr="1">
<device minor="1">/dev/drbd_srv01-fs37_1</device>
<disk>/dev/cs_vm-a01n01/srv01-fs37_1</disk>
<meta-disk>internal</meta-disk>
</volume>
<address family="(null)" port="(null)">(null)</address>
</host>
<host name="vm-a01n02">
<volume vnr="0">
<device minor="0">/dev/drbd_srv01-fs37_0</device>
<disk>/dev/cs_vm-a01n02/srv01-fs37_0</disk>
<meta-disk>internal</meta-disk>
</volume>
<volume vnr="1">
<device minor="1">/dev/drbd_srv01-fs37_1</device>
<disk>/dev/cs_vm-a01n02/srv01-fs37_1</disk>
<meta-disk>internal</meta-disk>
</volume>
<address family="(null)" port="(null)">(null)</address>
</host>
<host name="vm-a01dr01">
<volume vnr="0">
<device minor="0">/dev/drbd_srv01-fs37_0</device>
<disk>/dev/cs_vm-a01dr01/srv01-fs37_0</disk>
<meta-disk>internal</meta-disk>
</volume>
<volume vnr="1">
<device minor="1">/dev/drbd_srv01-fs37_1</device>
<disk>/dev/cs_vm-a01dr01/srv01-fs37_1</disk>
<meta-disk>internal</meta-disk>
</volume>
<address family="(null)" port="(null)">(null)</address>
</host>
<connection>
<host name="vm-a01n01"><address family="ipv4" port="7788">10.101.10.1</address></host>
<host name="vm-a01n02"><address family="ipv4" port="7788">10.101.10.2</address></host>
<section name="net">
<option name="protocol" value="C"/>
<option name="verify-alg" value="md5"/>
<option name="fencing" value="resource-and-stonith"/>
</section>
<section name="disk">
<option name="c-max-rate" value="500M"/>
</section>
</connection>
<connection>
<host name="vm-a01n01"><address family="ipv4" port="7789">10.201.10.1</address></host>
<host name="vm-a01dr01"><address family="ipv4" port="7789">10.201.10.3</address></host>
<section name="net">
<option name="protocol" value="A"/>
<option name="verify-alg" value="md5"/>
<option name="fencing" value="dont-care"/>
</section>
<section name="disk">
<option name="c-max-rate" value="500M"/>
</section>
</connection>
<connection>
<host name="vm-a01n02"><address family="ipv4" port="7790">10.201.10.2</address></host>
<host name="vm-a01dr01"><address family="ipv4" port="7790">10.201.10.3</address></host>
<section name="net">
<option name="protocol" value="A"/>
<option name="verify-alg" value="md5"/>
<option name="fencing" value="dont-care"/>
</section>
<section name="disk">
<option name="c-max-rate" value="500M"/>
</section>
</connection>
</resource>
=cut
foreach my $name ($dom->findnodes('/resource'))
{
my $resource = $name->{name};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { resource => $resource }});
foreach my $host ($name->findnodes('./host'))
{
my $this_host_name = $host->{name};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { this_host_name => $this_host_name }});
# Record the details under the hosts
foreach my $volume_vnr ($host->findnodes('./volume'))
{
my $volume = $volume_vnr->{vnr};
my $meta_disk = $volume_vnr->findvalue('./meta-disk');
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:volume' => $volume,
's2:meta_disk' => $meta_disk,
}});
my $host_uuid = $anvil->Get->host_uuid_from_name({host_name => $this_host_name});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { host_uuid => $host_uuid }});
$anvil->data->{new}{resource}{$resource}{host_name}{$this_host_name}{host_uuid} = $host_uuid;
$anvil->data->{new}{resource}{$resource}{host_uuid}{$host_uuid}{volume_number}{$volume}{device_path} = $volume_vnr->findvalue('./device');
$anvil->data->{new}{resource}{$resource}{host_uuid}{$host_uuid}{volume_number}{$volume}{backing_disk} = $volume_vnr->findvalue('./disk');
$anvil->data->{new}{resource}{$resource}{host_uuid}{$host_uuid}{volume_number}{$volume}{device_minor} = $volume_vnr->findvalue('./device/@minor');
$anvil->data->{new}{resource}{$resource}{host_uuid}{$host_uuid}{volume_number}{$volume}{meta_disk} = $meta_disk;
$anvil->data->{new}{resource}{$resource}{host_uuid}{$host_uuid}{volume_number}{$volume}{size} = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:new::resource::${resource}::host_name::${this_host_name}::host_uuid" => $anvil->data->{new}{resource}{$resource}{host_name}{$this_host_name}{host_uuid},
"s2:new::resource::${resource}::host_uuid::${host_uuid}::volume_number::${volume}::device_path" => $anvil->data->{new}{resource}{$resource}{host_uuid}{$host_uuid}{volume_number}{$volume}{device_path},
"s3:new::resource::${resource}::host_uuid::${host_uuid}::volume_number::${volume}::backing_disk" => $anvil->data->{new}{resource}{$resource}{host_uuid}{$host_uuid}{volume_number}{$volume}{backing_disk},
"s4:new::resource::${resource}::host_uuid::${host_uuid}::volume_number::${volume}::device_minor" => $anvil->data->{new}{resource}{$resource}{host_uuid}{$host_uuid}{volume_number}{$volume}{device_minor},
"s5:new::resource::${resource}::host_uuid::${host_uuid}::volume_number::${volume}::meta_disk" => $anvil->data->{new}{resource}{$resource}{host_uuid}{$host_uuid}{volume_number}{$volume}{meta_disk},
}});
}
}
foreach my $connection ($name->findnodes('./connection'))
{
my $host1_name = "";
my $host1_ip_address = "";
my $host1_tcp_port = "";
my $host2_name = "";
my $host2_ip_address = "";
my $host2_tcp_port = "";
my $peer = "";
foreach my $host ($connection->findnodes('./host'))
{
my $this_host_name = $host->{name};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { this_host_name => $this_host_name }});
if (not $host1_name)
{
$host1_name = $this_host_name;
$host1_ip_address = $host->findvalue('./address');
$host1_tcp_port = $host->findvalue('./address/@port');
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
host1_name => $host1_name,
host1_ip_address => $host1_ip_address,
host1_tcp_port => $host1_tcp_port,
}});
}
else
{
$host2_name = $this_host_name;
$host2_ip_address = $host->findvalue('./address');
$host2_tcp_port = $host->findvalue('./address/@port');
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
host2_name => $host2_name,
host2_ip_address => $host2_ip_address,
host2_tcp_port => $host2_tcp_port,
}});
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host1_ip_address} = $host1_ip_address;
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host1_tcp_port} = $host1_tcp_port;
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_ip_address} = $host2_ip_address;
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_tcp_port} = $host2_tcp_port;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host1_ip_address" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host1_ip_address},
"s2:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host1_tcp_port" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host1_tcp_port},
"s3:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host2_ip_address" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_ip_address},
"s4:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host2_tcp_port" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_tcp_port},
}});
foreach my $proxy ($host->findnodes('./proxy'))
{
my $host_name = $proxy->{hostname};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { host_name => $host_name }});
# This should always be the target, but lets be safe/careful
next if $host_name ne $host2_name;
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_inside_ip_address} = $proxy->findvalue('./inside');
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_inside_tcp_port} = $proxy->findvalue('./inside/@port');
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_outside_ip_address} = $proxy->findvalue('./outside');
$anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_outside_tcp_port} = $proxy->findvalue('./outside/@port');
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"s1:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host2_inside_ip_address" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_inside_ip_address},
"s2:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host2_inside_tcp_port" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_inside_tcp_port},
"s3:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host2_outside_ip_address" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_outside_ip_address},
"s4:new::resource::${resource}::host1_to_host2::${host1_name}::${host2_name}::host2_outside_tcp_port" => $anvil->data->{new}{resource}{$resource}{host1_to_host2}{$host1_name}{$host2_name}{host2_outside_tcp_port},
}});
$anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{inside}{ip_address} = $proxy->findvalue('./inside');
$anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{inside}{tcp_port} = $proxy->findvalue('./inside/@port');
$anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{outside}{ip_address} = $proxy->findvalue('./outside');
$anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{outside}{tcp_port} = $proxy->findvalue('./outside/@port');
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
"new::resource::${resource}::proxy::${host_name}::inside::ip_address" => $anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{inside}{ip_address},
"new::resource::${resource}::proxy::${host_name}::inside::tcp_port" => $anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{inside}{tcp_port},
"new::resource::${resource}::proxy::${host_name}::outside::ip_address" => $anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{outside}{ip_address},
"new::resource::${resource}::proxy::${host_name}::outside::tcp_port" => $anvil->data->{new}{resource}{$resource}{proxy}{$host_name}{outside}{tcp_port},
}});
}
}
}
}
}
}
return(0);
}
=head2 reload_defaults
This switches DRBD back to running using the values in the config files. Specifically, it calls C<< drbdadm adjust all >>.
The return code from the C<< drbdadm >> call is returned by this method.
Parameters;
=head3 password (optional)
This is the password to use when connecting to a remote machine. If not set, but C<< target >> is, an attempt to connect without a password will be made.
=head3 port (optional)
This is the TCP port to use when connecting to a remote machine. If not set, but C<< target >> is, C<< 22 >> will be used.
=head3 remote_user (optional, default 'root')
If C<< target >> is set, this will be the user we connect to the remote machine as.
=head3 resource (required)
This is the name of the resource to reload the default configuration for (ie: disable dual primary, pickup changes from the config file, etc)..
=head3 target (optional)
This is the IP or host name of the machine to read the version of. If this is not set, the local system's version is checked.
=cut
sub reload_defaults
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->reload_defaults()" }});
my $password = defined $parameter->{password} ? $parameter->{password} : "";
my $port = defined $parameter->{port} ? $parameter->{port} : "";
my $remote_user = defined $parameter->{remote_user} ? $parameter->{remote_user} : "root";
my $resource = defined $parameter->{resource} ? $parameter->{resource} : "";
my $target = defined $parameter->{target} ? $parameter->{target} : "";
my $return_code = 255;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
password => $anvil->Log->is_secure($password),
port => $port,
remote_user => $remote_user,
resource => $resource,
target => $target,
}});
if (not $resource)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "log_0020", variables => { method => "DRBD->reload_defaults()", parameter => "resource" }});
return($return_code);
}
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, 'print' => 0, level => $debug, key => "log_0355"});
my $shell_call = $anvil->data->{path}{exe}{drbdadm}." adjust ".$resource;
my $output = "";
if ($anvil->Network->is_local({host => $target}))
{
# Local.
($output, $return_code) = $anvil->System->call({shell_call => $shell_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
}
else
{
# Remote call.
($output, my $error, $return_code) = $anvil->Remote->call({
debug => $debug,
shell_call => $shell_call,
target => $target,
port => $port,
password => $password,
remote_user => $remote_user,
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
error => $error,
output => $output,
return_code => $return_code,
}});
}
if ($return_code)
{
# Something went wrong.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, 'print' => 1, level => 0, priority => "err", key => "log_0356", variables => {
return_code => $return_code,
output => $output,
}});
}
return($return_code);
}
=head2 remove_backing_lv
This method does the work wiping the data from, and then deleting the logical volume backing a DRBD resource. The return value from the C<< lvremove >> call is returned. If the C<< wipefs >> call returns non-zero, that return code is returned. If something else goes wrong, C<< 255 >> is returned.
B<< NOTE >>: This does no sanity checks! This method assumes all checks were done before this method was called!
Parameters;
=head3 backing_disk (required)
This is the full logical volume path that is to be deleted.
=cut
sub remove_backing_lv
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->remove_backing_lv()" }});
my $backing_disk = defined $parameter->{backing_disk} ? $parameter->{backing_disk} : "";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
backing_disk => $backing_disk,
}});
if (not $backing_disk)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "log_0020", variables => { method => "DRBD->remove_backing_lv()", parameter => "backing_disk" }});
return(255);
}
my $shell_call = $anvil->data->{path}{exe}{wipefs}." --all ".$backing_disk;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { shell_call => $shell_call }});
my ($output, $return_code) = $anvil->System->call({shell_call => $shell_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
if ($return_code)
{
# Should have been '0'
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, priority => "err", key => "error_0230", variables => {
shell_call => $shell_call,
return_code => $return_code,
output => $output,
}});
return($return_code);
}
# Now delete the logical volume
$shell_call = $anvil->data->{path}{exe}{lvremove}." --force ".$backing_disk;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { shell_call => $shell_call }});
($output, $return_code) = $anvil->System->call({shell_call => $shell_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
return($return_code);
}
=head2 resource_uuid
This method reads the C<< scan_drbd_resource_uuid >> from a DRBD resource file. If no UUID is found (and C<< new_resource_uuid >> isn't set), an empty string is returned. If there is a problem, C<< !!error!! >> is returned.
Parameters;
=head3 new_resource_uuid (optional)
If this is set to a UUID, and no existing UUID is found, this UUID will be added to the resource config file.
=head3 replace (optional, default 0)
If this is set along with C<< new_resource_uuid >> is also set, the UUID will replace an existing UUID if one is found. Otherwise, it's added like no UUID was found.
=head3 resource (required)
This is the name of resource whose UUID we're looking for.
=head3 resource_file (required)
This is the full path to the resource configuration file that the UUID will be read from, if possible.
=cut
### NOTE: This is not used at this time.
sub resource_uuid
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->resource_uuid()" }});
my $new_resource_uuid = defined $parameter->{new_resource_uuid} ? $parameter->{new_resource_uuid} : 0;
my $replace = defined $parameter->{replace} ? $parameter->{replace} : "";
my $resource = defined $parameter->{resource} ? $parameter->{resource} : "";
my $resource_file = defined $parameter->{resource_file} ? $parameter->{resource_file} : "";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
new_resource_uuid => $new_resource_uuid,
replace => $replace,
resource => $resource,
resource_file => $resource_file,
}});
if (not $resource)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "log_0020", variables => { method => "DRBD->resource_uuid()", parameter => "resource" }});
return('!!error!!');
}
if (not $resource_file)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "log_0020", variables => { method => "DRBD->resource_uuid()", parameter => "resource_file" }});
return('!!error!!');
}
my $scan_drbd_resource_uuid = "";
my $in_resource = 0;
my $resource_config = $anvil->Storage->read_file({file => $resource_file});
if ($resource_config eq "!!error!!")
{
# Something went wrong.
return('!!error!!');
}
foreach my $line (split/\n/, $resource_config)
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { line => $line }});
if ($line =~ /^resource (.*?) /)
{
my $this_resource = $1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { this_resource => $this_resource }});
if ($this_resource eq $resource)
{
$in_resource = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_resource => $in_resource }});
}
else
{
$in_resource = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_resource => $in_resource }});
}
}
if (($in_resource) && ($line =~ /# scan_drbd_resource_uuid = (.*)$/))
{
$scan_drbd_resource_uuid = $1;
$scan_drbd_resource_uuid =~ s/^\s+//;
$scan_drbd_resource_uuid =~ s/\s.*$//;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { scan_drbd_resource_uuid => $scan_drbd_resource_uuid }});
if (not $anvil->Validate->uuid({uuid => $scan_drbd_resource_uuid}))
{
# Found, but not valid.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0166", variables => {
resource => $resource,
file => $resource_file,
uuid => $scan_drbd_resource_uuid,
}});
return('!!error!!');
}
}
}
my $injected = 0;
my $new_resource_config = "";
if ($replace)
{
if ((not $new_resource_uuid) or (not $anvil->Validate->uuid({uuid => $new_resource_uuid})))
{
# We can't do this.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0167", variables => {
resource => $resource,
file => $resource_file,
uuid => $scan_drbd_resource_uuid,
}});
return('!!error!!');
}
my $in_resource = 0;
foreach my $line (split/\n/, $resource_config)
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { line => $line }});
if ($line =~ /^resource $resource /)
{
$in_resource = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_resource => $in_resource }});
}
elsif ($line =~ /^resource /)
{
$in_resource = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_resource => $in_resource }});
}
if ($in_resource)
{
if ($line =~ /# scan_drbd_resource_uuid = (.*)$/)
{
my $old_uuid = $1;
if ($old_uuid ne $new_resource_uuid)
{
$line =~ s/# scan_drbd_resource_uuid = .*$/# scan_drbd_resource_uuid = $new_resource_uuid/;
$injected = 1;
$scan_drbd_resource_uuid = $new_resource_uuid;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
line => $line,
injected => $injected,
scan_drbd_resource_uuid => $scan_drbd_resource_uuid,
}});
}
}
}
$new_resource_config .= $line."\n";
}
}
if ((not $scan_drbd_resource_uuid) && ($anvil->Validate->uuid({uuid => $new_resource_uuid})))
{
# Didn't find the resource UUID and we've been asked to add it.
foreach my $line (split/\n/, $resource_config)
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { line => $line }});
if ($line =~ /^resource $resource /)
{
$injected = 1;
$scan_drbd_resource_uuid = $new_resource_uuid;
$new_resource_config .= $line."\n";
$new_resource_config .= $anvil->Words->string({key => "message_0189", variables => { uuid => $scan_drbd_resource_uuid }});
next;
}
$new_resource_config .= $line."\n";
}
}
if ($injected)
{
my $error = $anvil->Storage->write_file({
debug => $debug,
body => $new_resource_config,
file => $resource_file,
user => "root",
group => "root",
mode => "0644",
overwrite => 1,
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { error => $error }});
}
return($scan_drbd_resource_uuid);
}
=head2 update_global_common
The core logic is done!!!! Still need to finish end-points for the WebUI to hook into, but the core of M3 is complete! Many, many bugs are expected, of course. :) * Created DRBD->check_if_syncsource() and ->check_if_synctarget() that return '1' if the target host is currently SyncSource or SyncTarget for any resource, respectively. * Updated DRBD->update_global_common() to return the unified-format diff if any changes were made to global-common.conf. * Created ScanCore->check_health() that returns the health score for a host. Created ->count_servers() that returns the number of servers on a host, how much RAM is used by those servers and, if available, the estimated migration time of the servers. Updated ->check_temperature() to set/clear/return the time that a host has been in a warning or critical temperature state. * Finished ScanCore->post_scan_analysis_node()!!! It certainly has bugs, and much testing is needed, but the logic is all in place! Oh what a slog that was... It should be far more intelligent than M2 though, once flushed out and tested. * Created Server->active_migrations() that returns '1' if any servers are in a migration on an Anvil! system. Updated ->migrate_virsh() to record how long a migration took in the "server::migration_duration" variable, which is averaged by ScanCore->count_servers() to estimate migration times. * Updated scan-drbd to check/update the global-common.conf file's config at the end of a scan. * Updated ScanCore itself to not scan when in maintenance mode. Also updated it to call 'anvil-safe-start' when ScanCore starts, so long as it is within ten minutes of the host booting. Signed-off-by: Digimer <digimer@alteeve.ca>
4 years ago
This configures C<< global_common.conf >> on the local host. Returns C<< !!error!! >> if there is a problem, an empty string if no update was needed and a unified C<< diff >> of the changes made, if any.
Parameters;
=head3 usage_count (optional, default '1')
By default, DRBD will call a LINBIT server and add itself to a counter, and then reports back what install number this machine is. This helps LINBIT understand how DRBD is used, and no personal identifiable information is passed to them. If you would like to disable this, set this to C<< 0 >>.
=head3 use_flushes (optional, default '1')
Normally, when a write is done, a flush is called to ensure the data has been written from cache to disk. This is usually desired as it is safe, but does impose a performance penalty.
When there is a hardware RAID controller with protected write cache, explicit flushes can safely be turned off, gaining performance.
If ScanCore can detect a hardware RAID controller, this method will disable disk flushes automatically. This parameter can be used to force flushes on (C<< 1 >>) or off (C<< 0 >>).
B<< Note >>: ScanCore can not yet do this.
=cut
sub update_global_common
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->update_global_common()" }});
my $usage_count = defined $parameter->{usage_count} ? $parameter->{usage_count} : 1;
my $use_flushes = defined $parameter->{use_flushes} ? $parameter->{use_flushes} : 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
usage_count => $usage_count,
use_flushes => $use_flushes,
}});
if (not -f $anvil->data->{path}{configs}{'global-common.conf'})
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0139"});
return('!!error!!');
}
# These values will be used to track where we are in processing the config file and what values are needed.
my $update = 0;
The core logic is done!!!! Still need to finish end-points for the WebUI to hook into, but the core of M3 is complete! Many, many bugs are expected, of course. :) * Created DRBD->check_if_syncsource() and ->check_if_synctarget() that return '1' if the target host is currently SyncSource or SyncTarget for any resource, respectively. * Updated DRBD->update_global_common() to return the unified-format diff if any changes were made to global-common.conf. * Created ScanCore->check_health() that returns the health score for a host. Created ->count_servers() that returns the number of servers on a host, how much RAM is used by those servers and, if available, the estimated migration time of the servers. Updated ->check_temperature() to set/clear/return the time that a host has been in a warning or critical temperature state. * Finished ScanCore->post_scan_analysis_node()!!! It certainly has bugs, and much testing is needed, but the logic is all in place! Oh what a slog that was... It should be far more intelligent than M2 though, once flushed out and tested. * Created Server->active_migrations() that returns '1' if any servers are in a migration on an Anvil! system. Updated ->migrate_virsh() to record how long a migration took in the "server::migration_duration" variable, which is averaged by ScanCore->count_servers() to estimate migration times. * Updated scan-drbd to check/update the global-common.conf file's config at the end of a scan. * Updated ScanCore itself to not scan when in maintenance mode. Also updated it to call 'anvil-safe-start' when ScanCore starts, so long as it is within ten minutes of the host booting. Signed-off-by: Digimer <digimer@alteeve.ca>
4 years ago
my $difference = "";
my $usage_count_seen = 0;
my $udev_always_use_vnr_seen = 0;
my $fence_peer_seen = 0;
my $unfence_peer_seen = 0;
my $auto_promote_seen = 0;
my $disk_flushes_seen = 0;
my $md_flushes_seen = 0;
my $allow_two_primaries_seen = 0;
my $after_sb_0pri_seen = 0;
my $after_sb_1pri_seen = 0;
my $after_sb_2pri_seen = 0;
my $timeout_seen = 0;
my $ping_timeout_seen = 0;
my $wfc_timeout_seen = 0;
my $in_global = 0;
my $in_common = 0;
my $in_handlers = 0;
my $in_startup = 0;
my $in_options = 0;
my $in_disk = 0;
my $in_net = 0;
### NOTE: See 'man drbd.conf-9.0' for details on options.
# These values will be used to track where we are in processing the config file and what values are needed.
my $say_usage_count = $usage_count ? "yes" : "no";
my $say_fence_peer = $anvil->data->{path}{exe}{fence_pacemaker};
my $say_unfence_peer = $anvil->data->{path}{exe}{unfence_pacemaker};
my $say_auto_promote = "yes";
my $say_flushes = $use_flushes ? "yes" : "no";
my $say_allow_two_primaries = "no";
my $say_after_sb_0pri = "discard-zero-changes";
my $say_after_sb_1pri = "discard-secondary";
my $say_after_sb_2pri = "disconnect";
my $say_timeout = "100";
my $say_ping_timeout = "30";
my $say_wfc_timeout = 120;
# Read in the existing config.
my $new_global_common = "";
my $old_global_common = $anvil->Storage->read_file({
debug => $debug,
file => $anvil->data->{path}{configs}{'global-common.conf'},
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { old_global_common => $old_global_common }});
foreach my $line (split/\n/, $old_global_common)
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { line => $line }});
my $comment = "";
if ($line =~ /^#/)
{
$new_global_common .= $line."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
next;
}
if ($line =~ /(#.*)$/)
{
$comment = $1;
$line =~ s/\Q$comment\E//;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
comment => $comment,
line => $line,
}});
}
if ($line =~ /\}/)
{
if ($in_global)
{
$in_global = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_global => $in_global }});
if (not $usage_count_seen)
{
$update = 1;
my $new_line = "\tusage-count ".$say_usage_count.";";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
}
if (not $udev_always_use_vnr_seen)
{
$update = 1;
my $new_line = "\tudev-always-use-vnr;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
}
}
elsif ($in_common)
{
if ($in_handlers)
{
$in_handlers = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_handlers => $in_handlers }});
if (not $fence_peer_seen)
{
$update = 1;
my $new_line = "\t\tfence-peer ".$say_fence_peer.";";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
}
if (not $unfence_peer_seen)
{
$update = 1;
my $new_line = "\t\tunfence-peer ".$say_unfence_peer.";";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
}
}
elsif ($in_startup)
{
$in_startup = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_startup => $in_startup }});
if (not $wfc_timeout_seen)
{
$update = 1;
my $new_line = "\t\twfc-timeout ".$say_wfc_timeout.";";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
}
}
elsif ($in_options)
{
$in_options = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_options => $in_options }});
if (not $auto_promote_seen)
{
$update = 1;
my $new_line = "\t\tauto-promote ".$say_auto_promote.";";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
}
}
elsif ($in_disk)
{
$in_disk = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_disk => $in_disk }});
if (not $disk_flushes_seen)
{
$update = 1;
my $new_line = "\t\tdisk-flushes ".$say_flushes.";";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
}
if (not $md_flushes_seen)
{
$update = 1;
my $new_line = "\t\tmd-flushes ".$say_flushes.";";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
}
}
elsif ($in_net)
{
$in_net = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_net => $in_net }});
if (not $allow_two_primaries_seen)
{
$update = 1;
my $new_line = "\t\tallow-two-primaries ".$say_allow_two_primaries.";";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
}
if (not $after_sb_0pri_seen)
{
$update = 1;
my $new_line = "\t\tafter-sb-0pri ".$say_after_sb_0pri.";";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
}
if (not $after_sb_1pri_seen)
{
$update = 1;
my $new_line = "\t\tafter-sb-1pri ".$say_after_sb_1pri.";";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
}
if (not $after_sb_2pri_seen)
{
$update = 1;
my $new_line = "\t\tafter-sb-2pri ".$say_after_sb_2pri.";";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
}
if (not $timeout_seen)
{
$update = 1;
my $new_line = "\t\ttimeout ".$say_timeout.";";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
}
if (not $ping_timeout_seen)
{
$update = 1;
my $new_line = "\t\tping-timeout ".$say_ping_timeout.";";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
}
}
else
{
$in_common = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_common => $in_common }});
}
}
}
if ($line =~ /global\s*\{/)
{
$in_global = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_global => $in_global }});
}
if ($in_common)
{
if ($line =~ /handlers\s*\{/)
{
$in_handlers = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_handlers => $in_handlers }});
}
if ($line =~ /startup\s*\{/)
{
$in_startup = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_startup => $in_startup }});
}
if ($line =~ /options\s*\{/)
{
$in_options = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_options => $in_options }});
}
if ($line =~ /disk\s*\{/)
{
$in_disk = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_disk => $in_disk }});
}
if ($line =~ /net\s*\{/)
{
$in_net = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_net => $in_net }});
}
}
if ($line =~ /common\s*\{/)
{
$in_common = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { in_common => $in_common }});
}
if ($in_global)
{
if ($line =~ /(\s*)usage-count(\s+)(.*?)(;.*)$/)
{
my $left_space = $1;
my $middle_space = $2;
my $value = $3;
my $right_side = $4;
$usage_count_seen = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:left_space' => $left_space,
's2:middle_space' => $middle_space,
's3:value' => $value,
's4:right_side' => $right_side,
's5:usage_count_seen' => $usage_count_seen,
}});
if ($value ne $say_usage_count)
{
$update = 1;
my $new_line = $left_space."usage-count".$middle_space.$say_usage_count.$right_side;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line.$comment."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
next;
}
}
if ($line =~ /\s*udev-always-use-vnr;/)
{
$udev_always_use_vnr_seen = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
udev_always_use_vnr_seen => $usage_count_seen,
}});
}
}
if ($in_handlers)
{
if ($line =~ /(\s*)unfence-peer(\s+)(.*?)(;.*)$/)
{
my $left_space = $1;
my $middle_space = $2;
my $value = $3;
my $right_side = $4;
$unfence_peer_seen = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:left_space' => $left_space,
's2:middle_space' => $middle_space,
's3:value' => $value,
's4:right_side' => $right_side,
's5:unfence_peer_seen' => $unfence_peer_seen,
's6:say_unfence_peer' => $say_unfence_peer,
}});
if ($value ne $say_unfence_peer)
{
$update = 1;
my $new_line = $left_space."unfence-peer".$middle_space.$say_unfence_peer.$right_side;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line.$comment."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
next;
}
}
elsif ($line =~ /(\s*)fence-peer(\s+)(.*?)(;.*)$/)
{
my $left_space = $1;
my $middle_space = $2;
my $value = $3;
my $right_side = $4;
$fence_peer_seen = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:left_space' => $left_space,
's2:middle_space' => $middle_space,
's3:value' => $value,
's4:right_side' => $right_side,
's5:fence_peer_seen' => $fence_peer_seen,
's6:say_fence_peer' => $say_fence_peer,
}});
if ($value ne $say_fence_peer)
{
$update = 1;
my $new_line = $left_space."fence-peer".$middle_space.$say_fence_peer.$right_side;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line.$comment."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
next;
}
}
}
if ($in_startup)
{
if ($line =~ /(\s*)wfc-timeout(\s+)(.*?)(;.*)$/)
{
my $left_space = $1;
my $middle_space = $2;
my $value = $3;
my $right_side = $4;
$wfc_timeout_seen = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:left_space' => $left_space,
's2:middle_space' => $middle_space,
's3:value' => $value,
's4:right_side' => $right_side,
's5:wfc_timeout_seen' => $wfc_timeout_seen,
}});
if ($value ne $say_wfc_timeout)
{
$update = 1;
my $new_line = $left_space."wfc-timeout".$middle_space.$say_wfc_timeout.$right_side;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line.$comment."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
next;
}
}
}
if ($in_options)
{
if ($line =~ /(\s*)auto-promote(\s+)(.*?)(;.*)$/)
{
my $left_space = $1;
my $middle_space = $2;
my $value = $3;
my $right_side = $4;
$auto_promote_seen = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:left_space' => $left_space,
's2:middle_space' => $middle_space,
's3:value' => $value,
's4:right_side' => $right_side,
's5:auto_promote_seen' => $auto_promote_seen,
}});
if ($value ne $say_auto_promote)
{
$update = 1;
my $new_line = $left_space."auto-promote".$middle_space.$say_auto_promote.$right_side;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line.$comment."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
next;
}
}
}
if ($in_disk)
{
if ($line =~ /(\s*)disk-flushes(\s+)(.*?)(;.*)$/)
{
my $left_space = $1;
my $middle_space = $2;
my $value = $3;
my $right_side = $4;
$disk_flushes_seen = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:left_space' => $left_space,
's2:middle_space' => $middle_space,
's3:value' => $value,
's4:right_side' => $right_side,
's5:disk_flushes_seen' => $disk_flushes_seen,
}});
if ($value ne $say_flushes)
{
$update = 1;
my $new_line = $left_space."disk-flushes".$middle_space.$say_flushes.$right_side;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line.$comment."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
next;
}
}
if ($line =~ /(\s*)md-flushes(\s+)(.*?)(;.*)$/)
{
my $left_space = $1;
my $middle_space = $2;
my $value = $3;
my $right_side = $4;
$md_flushes_seen = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:left_space' => $left_space,
's2:middle_space' => $middle_space,
's3:value' => $value,
's4:right_side' => $right_side,
's5:md_flushes_seen' => $md_flushes_seen,
}});
if ($value ne $say_flushes)
{
$update = 1;
my $new_line = $left_space."md-flushes".$middle_space.$say_flushes.$right_side;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line.$comment."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
next;
}
}
}
if ($in_net)
{
if ($line =~ /(\s*)allow-two-primaries(\s+)(.*?)(;.*)$/)
{
my $left_space = $1;
my $middle_space = $2;
my $value = $3;
my $right_side = $4;
$allow_two_primaries_seen = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:left_space' => $left_space,
's2:middle_space' => $middle_space,
's3:value' => $value,
's4:right_side' => $right_side,
's5:allow_two_primaries_seen' => $allow_two_primaries_seen,
}});
if ($value ne $say_allow_two_primaries)
{
$update = 1;
my $new_line = $left_space."allow-two-primaries".$middle_space.$say_allow_two_primaries.$right_side;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line.$comment."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
next;
}
}
if ($line =~ /(\s*)after-sb-0pri(\s+)(.*?)(;.*)$/)
{
my $left_space = $1;
my $middle_space = $2;
my $value = $3;
my $right_side = $4;
$after_sb_0pri_seen = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:left_space' => $left_space,
's2:middle_space' => $middle_space,
's3:value' => $value,
's4:right_side' => $right_side,
's5:after_sb_0pri_seen' => $after_sb_0pri_seen,
}});
if ($value ne $say_after_sb_0pri)
{
$update = 1;
my $new_line = $left_space."after-sb-0pri".$middle_space.$say_after_sb_0pri.$right_side;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line.$comment."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
next;
}
}
if ($line =~ /(\s*)after-sb-1pri(\s+)(.*?)(;.*)$/)
{
my $left_space = $1;
my $middle_space = $2;
my $value = $3;
my $right_side = $4;
$after_sb_1pri_seen = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:left_space' => $left_space,
's2:middle_space' => $middle_space,
's3:value' => $value,
's4:right_side' => $right_side,
's5:after_sb_1pri_seen' => $after_sb_1pri_seen,
}});
if ($value ne $say_after_sb_1pri)
{
$update = 1;
my $new_line = $left_space."after-sb-1pri".$middle_space.$say_after_sb_1pri.$right_side;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line.$comment."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
next;
}
}
if ($line =~ /(\s*)after-sb-2pri(\s+)(.*?)(;.*)$/)
{
my $left_space = $1;
my $middle_space = $2;
my $value = $3;
my $right_side = $4;
$after_sb_2pri_seen = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:left_space' => $left_space,
's2:middle_space' => $middle_space,
's3:value' => $value,
's4:right_side' => $right_side,
's5:after_sb_2pri_seen' => $after_sb_2pri_seen,
}});
if ($value ne $say_after_sb_2pri)
{
$update = 1;
my $new_line = $left_space."after-sb-2pri".$middle_space.$say_after_sb_2pri.$right_side;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line.$comment."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
next;
}
}
if ($line =~ /(\s*)ping-timeout(\s+)(.*?)(;.*)$/)
{
my $left_space = $1;
my $middle_space = $2;
my $value = $3;
my $right_side = $4;
$ping_timeout_seen = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:left_space' => $left_space,
's2:middle_space' => $middle_space,
's3:value' => $value,
's4:right_side' => $right_side,
's5:ping_timeout_seen' => $ping_timeout_seen,
}});
if ($value ne $say_ping_timeout)
{
$update = 1;
my $new_line = $left_space."ping-timeout".$middle_space.$say_ping_timeout.$right_side;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line.$comment."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
next;
}
}
# For some reason, this matches 'ping-timeout' hence the 'else'.
elsif ($line =~ /(\s*)timeout(\s+)(.*?)(;.*)$/)
{
my $left_space = $1;
my $middle_space = $2;
my $value = $3;
my $right_side = $4;
$timeout_seen = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:left_space' => $left_space,
's2:middle_space' => $middle_space,
's3:value' => $value,
's4:right_side' => $right_side,
's5:timeout_seen' => $timeout_seen,
}});
if ($value ne $say_timeout)
{
$update = 1;
my $new_line = $left_space."timeout".$middle_space.$say_timeout.$right_side;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_line' => $new_line,
}});
$new_global_common .= $new_line.$comment."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
next;
}
}
}
# Add this line (will have 'next'ed if the line was modified before getting here).
$new_global_common .= $line.$comment."\n";
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0518", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'}, line => $line }});
}
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
's1:update' => $update,
's2:new_global_common' => $new_global_common,
}});
if ($update)
{
The core logic is done!!!! Still need to finish end-points for the WebUI to hook into, but the core of M3 is complete! Many, many bugs are expected, of course. :) * Created DRBD->check_if_syncsource() and ->check_if_synctarget() that return '1' if the target host is currently SyncSource or SyncTarget for any resource, respectively. * Updated DRBD->update_global_common() to return the unified-format diff if any changes were made to global-common.conf. * Created ScanCore->check_health() that returns the health score for a host. Created ->count_servers() that returns the number of servers on a host, how much RAM is used by those servers and, if available, the estimated migration time of the servers. Updated ->check_temperature() to set/clear/return the time that a host has been in a warning or critical temperature state. * Finished ScanCore->post_scan_analysis_node()!!! It certainly has bugs, and much testing is needed, but the logic is all in place! Oh what a slog that was... It should be far more intelligent than M2 though, once flushed out and tested. * Created Server->active_migrations() that returns '1' if any servers are in a migration on an Anvil! system. Updated ->migrate_virsh() to record how long a migration took in the "server::migration_duration" variable, which is averaged by ScanCore->count_servers() to estimate migration times. * Updated scan-drbd to check/update the global-common.conf file's config at the end of a scan. * Updated ScanCore itself to not scan when in maintenance mode. Also updated it to call 'anvil-safe-start' when ScanCore starts, so long as it is within ten minutes of the host booting. Signed-off-by: Digimer <digimer@alteeve.ca>
4 years ago
$difference = diff \$old_global_common, \$new_global_common, { STYLE => 'Unified' };
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0517", variables => {
file => $anvil->data->{path}{configs}{'global-common.conf'},
The core logic is done!!!! Still need to finish end-points for the WebUI to hook into, but the core of M3 is complete! Many, many bugs are expected, of course. :) * Created DRBD->check_if_syncsource() and ->check_if_synctarget() that return '1' if the target host is currently SyncSource or SyncTarget for any resource, respectively. * Updated DRBD->update_global_common() to return the unified-format diff if any changes were made to global-common.conf. * Created ScanCore->check_health() that returns the health score for a host. Created ->count_servers() that returns the number of servers on a host, how much RAM is used by those servers and, if available, the estimated migration time of the servers. Updated ->check_temperature() to set/clear/return the time that a host has been in a warning or critical temperature state. * Finished ScanCore->post_scan_analysis_node()!!! It certainly has bugs, and much testing is needed, but the logic is all in place! Oh what a slog that was... It should be far more intelligent than M2 though, once flushed out and tested. * Created Server->active_migrations() that returns '1' if any servers are in a migration on an Anvil! system. Updated ->migrate_virsh() to record how long a migration took in the "server::migration_duration" variable, which is averaged by ScanCore->count_servers() to estimate migration times. * Updated scan-drbd to check/update the global-common.conf file's config at the end of a scan. * Updated ScanCore itself to not scan when in maintenance mode. Also updated it to call 'anvil-safe-start' when ScanCore starts, so long as it is within ten minutes of the host booting. Signed-off-by: Digimer <digimer@alteeve.ca>
4 years ago
diff => $difference,
}});
my $failed = $anvil->Storage->write_file({
debug => $debug,
overwrite => 1,
backup => 1,
file => $anvil->data->{path}{configs}{'global-common.conf'},
body => $new_global_common,
user => "root",
group => "root",
mode => "0644",
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { failed => $failed }});
if ($failed)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "error_0043", variables => { file => $anvil->data->{path}{configs}{'global-common.conf'} }});
return('!!error!!');
}
}
The core logic is done!!!! Still need to finish end-points for the WebUI to hook into, but the core of M3 is complete! Many, many bugs are expected, of course. :) * Created DRBD->check_if_syncsource() and ->check_if_synctarget() that return '1' if the target host is currently SyncSource or SyncTarget for any resource, respectively. * Updated DRBD->update_global_common() to return the unified-format diff if any changes were made to global-common.conf. * Created ScanCore->check_health() that returns the health score for a host. Created ->count_servers() that returns the number of servers on a host, how much RAM is used by those servers and, if available, the estimated migration time of the servers. Updated ->check_temperature() to set/clear/return the time that a host has been in a warning or critical temperature state. * Finished ScanCore->post_scan_analysis_node()!!! It certainly has bugs, and much testing is needed, but the logic is all in place! Oh what a slog that was... It should be far more intelligent than M2 though, once flushed out and tested. * Created Server->active_migrations() that returns '1' if any servers are in a migration on an Anvil! system. Updated ->migrate_virsh() to record how long a migration took in the "server::migration_duration" variable, which is averaged by ScanCore->count_servers() to estimate migration times. * Updated scan-drbd to check/update the global-common.conf file's config at the end of a scan. * Updated ScanCore itself to not scan when in maintenance mode. Also updated it to call 'anvil-safe-start' when ScanCore starts, so long as it is within ten minutes of the host booting. Signed-off-by: Digimer <digimer@alteeve.ca>
4 years ago
return($difference);
}
# =head3
#
# Private Functions;
#
# =cut
#############################################################################################################
# Private functions #
#############################################################################################################
=head2 _initialize_kmod
This checks to see if the C<< drbd >> kernel module can load. If not, a check is made to see if an RPM that matches the kernel exists. If so, it is installed. If not, C<< akmods >> is asked to build and install the drbd kernel module.
Returns C<< 0 >> is the module loads or is already loaded. C<< !!error!! >> if not.
=cut
sub _initialize_kmod
{
my $self = shift;
my $parameter = shift;
my $anvil = $self->parent;
my $debug = defined $parameter->{debug} ? $parameter->{debug} : 3;
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => $debug, key => "log_0125", variables => { method => "DRBD->_initialize_kmod()" }});
my $kernel_release = $anvil->Get->kernel_release({debug => $debug});
my $shell_call = $anvil->data->{path}{exe}{modprobe}." drbd";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
kernel_release => $kernel_release,
shell_call => $shell_call,
}});
my ($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $shell_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
if (not $return_code)
{
# Loaded fine
return(0);
}
else
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0676"});
my $install = 0;
my $shell_call = $anvil->data->{path}{exe}{dnf}." -q search kmod-drbd-".$kernel_release;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { shell_call => $shell_call }});
my ($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $shell_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
foreach my $line (split/\n/, $output)
{
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { line => $line }});
if ($line =~ /Name Exactly/)
{
# We can install.
$install = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { install => $install }});
last;
}
}
# Install or build?
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { install => $install }});
if ($install)
{
### TODO: Should this be a background process?
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0677"});
my $shell_call = $anvil->data->{path}{exe}{dnf}." -y install kmod-drbd-".$kernel_release;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { shell_call => $shell_call }});
my ($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $shell_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
}
else
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0678"});
my $shell_call = $anvil->data->{path}{exe}{akmods}." --force";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => { shell_call => $shell_call }});
my ($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $shell_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
}
# In either case, try again.
$output = undef;
$return_code = undef;
$shell_call = $anvil->data->{path}{exe}{modprobe}." drbd";
($output, $return_code) = $anvil->System->call({debug => $debug, shell_call => $shell_call});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => $debug, list => {
output => $output,
return_code => $return_code,
}});
if (not $return_code)
{
# Loaded fine
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0679"});
return(0);
}
else
{
# Failed
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "alert", key => "warning_0132"});
}
}
return('!!error!!');
}