<keyname="alert_message_0001">The scan agent: [#!variable!agent_name!#] timed out! It was given: [#!variable!timeout!#] seconds to run, but it didn't return, so it was terminated.</key>
<keyname="message_0002">The connection to: [#!variable!connection!#] was refused. If you recently booted the target, the network might have started, the ssh daemon might not be running yet.</key>
<keyname="message_0003">There is no route to: [#!variable!target!#]. Is the machine (or the interface) up?</key>
<keyname="message_0004">Timed out while waiting for a reply from: [#!variable!target!#]. Is the machine booting up? If so, please wait a minute or two and try again.</key>
<keyname="message_0005">There was an unknown error while connecting to: [#!variable!target!#]. The error was: [#!variable!error!#]</key>
<keyname="message_0006">We were unable to log in to: [#!variable!connection!#]. Please check that the password is correct or that passwordless SSH is configured properly.</key>
<keyname="message_0008">The remote shell call: [#!variable!shell_call!#] to: [#!variable!connection!#] failed with the error: [#!variable!error!#].</key>
<keyname="message_0016">The host name: [#!variable!host_name!#] has been set.</key>
<keyname="message_0017">Failed to set the host name: [#!variable!host_name!#]! The host name is currently [#!variable!bad_host_name!#]. This is probably a program error.</key>
<keyname="message_0069">Added the peer to the config file.</key>
<keyname="message_0070">Old peer found and removed from the config file.</key>
<keyname="message_0071">Existing peer found and update needed and made.</key>
<keyname="message_0072">Configuration changed, existing config backed up as: [#!variable!backup!#].</key>
<keyname="message_0073">New config written to disk.</key>
<keyname="message_0074">Reconnecting to the database(s) to ask the peer to add us. Will hold here until the peer is added to the 'hosts' table. Please be patient.</key>
<keyname="message_0075">The peer: [#!variable!host!#] is now in the database. Proceeding.</key>
<keyname="message_0076">The job the peer add us has been registered. It should add us as soon as it looks for new jobs (generally within a second or two).</key>
<!-- The strings below are used in the 'default' PXE menu. Entries used as option labels use '^' to indicate the hotkey, and must be unique in a given menu. -->
<keyname="message_0100">Copying the syslinux files: [#!data!path::directories::syslinux!#/*] into the tftpboot directory: [#!data!path::directories::tftpboot!#].</key>
<keyname="message_0101">The syslinux files from: [#!data!path::directories::syslinux!#] appear to already be in the tftpboot directory: [#!data!path::directories::tftpboot!#], skipping.</key>
<keyname="message_0102">Checking that the "Install Target" function is configured and updated.</key>
<!-- The strings below are printed in bash, so be mindful of escaping characters. The strings are wrapped in double-quotes ("), so escape them with a back-slash (\") -->
<keyname="message_0103">Finding install drive for a Striker dashboard.</key>
<keyname="message_0104">Finding install drive for an Anvil! node.</key>
<keyname="message_0105">Finding install drive for a DR (disaster recovery) host.</key>
<keyname="message_0106">
[ Error ] - Target type not specified. Be sure that '\$type' is set to
'striker', 'node' or 'dr' in the \%pre section of the kickstart
script.
</key>
<!-- These are injected into the perl script in the kickstart files. Leave the string variables and function calls in place! -->
<keyname="message_0107"><![CDATA[Analyzing platter drive: [".$path."], using the transport: [".$device->{$path}{transport}."], of the size: [".$device->{$path}{size}." (".hr_size($device->{$path}{size}).")]]]></key>
<keyname="message_0108"><![CDATA[Analyzing solid-state drive: [".$path."], using the transport: [".$device->{$path}{transport}."], of the size: [".$device->{$path}{size}." (".hr_size($device->{$path}{size}).")]]]></key>
<keyname="message_0109"><![CDATA[Selected the largest disk: [".$use_drive."], which has a capacity of: [".hr_size($device->{$use_drive}{size})."]]]></key>
<keyname="message_0110"><![CDATA[Selected the smallest platter drive: [".$use_drive."], which has a capacity of: [".hr_size($device->{$use_drive}{size})."]]]></key>
<keyname="message_0111"><![CDATA[Selected the smallest solid-state drive: [".$use_drive."], which has a capacity of: [".hr_size($device->{$use_drive}{size})."] (no platter drives found)]]></key>
<keyname="message_0112"><![CDATA[[ Error ] - Failed to find any fixed drives (platter or USB, not removable) to install onto. Unable to proceed.]]></key>
<keyname="message_0113"><![CDATA[Writing out the partition plan to: [".$partition_file."]]]></key>
<!-- Above here are strings used in the kickstart scripts. Be sure to test kickstart installation after changing / translation between 'message_0103' and 'message_0114'. -->
<keyname="message_0119">[ Error ] - The comps.xml file: [#!variable!comps_xml!#] was not found. This provides package group information required for Install Target guests. Is the 'anvil-striker-extra' package installed?</key>
<keyname="message_0129">[ Error ] - The comps.xml file: [#!variable!comps_xml!#] was found, but something failed when we tried to copy it to: [#!variable!target_comps!#].</key>
<keyname="message_0131">Back-Channel Network ##!variable!number!# - Used for all inter-machine communication in the Anvil!, as well as communication for foundation pack devices. Should be VLAN-isolated from the IFN and, thus, trusted.</key>
<keyname="message_0132">Storage Network ##!variable!number!# - Used for DRBD communication between nodes and DR hosts. Should be VLAN-isolated from the IFN and, thus, trusted.</key>
<keyname="message_0133">Internet/Intranet-Facing Network ##!variable!number!# - Used for all client/user facing traffic. Likely connected to a semi-trusted network only.</key>
<keyname="message_0134">Updating / configuring the firewall.</key>
<keyname="message_0143">The zone: [#!variable!zone!#]'s user-land file: [#!variable!file!#] exists. Skipping checking the configuration of this zone.</key>
<keyname="message_0148"><![CDATA[This is a RHEL host and has not yet been subscribed. You can enter your Red Hat subscription credentials below. If the host has internet access, the host will be subscribed during setup.]]></key>
<keyname="message_0149">The target's host key has changed. If the target has been rebuilt, or the target IP reused, the old key will need to be removed. If this is the case, remove line: [#!variable!line!#] from: [#!variable!file!#].</key>
<keyname="message_0151">This is a RHEL host and has not yet been subscribed, but there is no internet access detected. OS Updates likely won't work, nor will subscribing the system. These tasks will be deferred until later in the setup process.</key>
<keyname="message_0152">There is no internet access detected. OS Updates likely won't work and will be deferred until later in the setup process.</key>
<keyname="message_0154">Mail Server Configuration</key>
<keyname="message_0155">When alert emails are sent, they are stored locally and then forwarded to a mail server. This is where you can configure the mail server that alerts are forwarded to for delivery to recipients.</key>
<keyname="message_0157">When a system alert is recorded, any alert recipient interested in that alert will be notified by email. This is determined by the alert's level, and the recipients alert level interest. If the alert's level is equal to or higher than a given alert, an email will be crafted for them, in their chosen language and units.</key>
<keyname="message_0158">[ Error ] - The modules.yaml file: [#!variable!modules_yaml!#] was found, but something failed when we tried to copy it to: [#!variable!target_modules!#].</key>
<keyname="log_0020"><![CDATA[[ Error ] - The method: [#!variable!method!#] was called but the: [#!variable!parameter!#] parameter was not passed or it is empty.]]></key>
<keyname="log_0021"><![CDATA[[ Error ] - The method Storage->read_file() was asked to read the file: [#!variable!file!#], but that file does not exist.]]></key>
<keyname="log_0022"><![CDATA[[ Error ] - The method Storage->read_file() was asked to read the file: [#!variable!file!#] which exists but can't be read.]]></key>
<keyname="log_0024"><![CDATA[[ Error ] - No template file passed to Template->get().]]></key>
<keyname="log_0025"><![CDATA[[ Error ] - No requested template file: [#!variable!source!#] does not exist. Is it missing in the active skin?]]></key>
<keyname="log_0026"><![CDATA[[ Error ] - The requested template file: [#!variable!source!#] is not readable. Please check that it is readable by the webserver user: [#!variable!user_name!#]]]></key>
<keyname="log_0027"><![CDATA[[ Error ] - No template name passed to Template->get().]]></key>
<keyname="log_0028">Successfully read the words file: [#!variable!file!#].</key>
<keyname="log_0029"><![CDATA[[ Error ] - Storage->find() failed to find: [#!variable!file!#].]]></key>
<keyname="log_0030"><![CDATA[[ Warning ] - Template->skin() was asked to set the skin: [#!variable!set!#], but the source directory: [#!variable!skin_directory!#] doesn't exist. Ignoring.]]></key>
<keyname="log_0031"><![CDATA[[ Warning ] - Storage->search_directories() was passed the array: [#!variable!array!#], but it wasn't actually an array. Using @INC + path::directories::tools + \$ENV{'PATH'} for the list of directories to search instead.]]></key>
<keyname="log_0034"><![CDATA[[ Warning ] - Anvil::Tools::Words->read()' asked to read: [#!variable!file!#] which was not readable by: [#!variable!user!#] (uid/euid: [#!variable!uid!#]).]]></key>
<keyname="log_0035"><![CDATA[[ Warning ] - The config file: [#!variable!file!#] appears to have a malformed line: [#!variable!count!#:#!variable!line!#].]]></key>
<keyname="log_0036"><![CDATA[[ Error ] - The method Database->read_variable() was called but both the 'variable_name' and 'variable_uuid' parameters were not passed or both were empty.]]></key>
<keyname="log_0037"><![CDATA[[ Error ] - The method Database->insert_or_update_variables() method was called but both the 'variable_name' and 'variable_uuid' parameters were not passed or both were empty.]]></key>
<keyname="log_0038"><![CDATA[[ Error ] - The method Storage->change_mode() was called without an invalid 'mode' parameter. It should have been three or four digits, or 'x+/-y' format, but: [#!variable!mode!#] was passed.]]></key>
<keyname="log_0040"><![CDATA[[ Error ] - The method Storage->write_file() was asked to write the file: [#!variable!file!#] but it already exists and 'overwrite' was not set. Aborting.]]></key>
<keyname="log_0041"><![CDATA[[ Error ] - The method Storage->write_file() was asked to write the file: [#!variable!file!#] but it is not a full path. Aborting.]]></key>
<keyname="log_0042"><![CDATA[[ Error ] - The method Words->string() was asked to process the string: [#!variable!string!#] which has insertion variables, but nothing was passed to the 'variables' parameter.]]></key>
<keyname="log_0043"><![CDATA[[ Error ] - The method System->call() was called but 'shell_call' was not passed or was empty.]]></key>
<keyname="log_0046"><![CDATA[[ Note ] - The method Storage->#!variable!method!#() was asked to copy: [#!variable!source_file!#] to: [#!variable!target_file!#], but the target already exists and 'overwrite' wasn't specified, skipping.]]></key>
<keyname="log_0047"><![CDATA[[ Error ] - The method Log->level() was passed an invalid log level: [#!variable!set!#]. Only '0', '1', '2', '3' or '4' are valid.]]></key>
<keyname="log_0048"><![CDATA[[ Warning ] - Testing of Anvil::Tools is beginning. This will generate warnings and alerts and are not a concern.]]></key>
<keyname="log_0049"><![CDATA[[ Warning ] - Testing of Anvil::Tools is complete.]]></key>
<keyname="log_0050">[ Error ] - There is a local database defined, but it does not appear to exist and we could not initialize the database server. Is 'postgresql-server' installed?</key>
<keyname="log_0051"><![CDATA[[ Error ] - The method Storage->change_owner() was asked to change the ownership of: [#!variable!path!#] which doesn't exist.]]></key>
<keyname="log_0052"><![CDATA[[ Error ] - The method Storage->#!variable!method!#() was called but the source file: [#!variable!source_file!#] doesn't exist.]]></key>
<keyname="log_0058"><![CDATA[[ Error ] - The method Remote->call() was called but the port: [#!variable!port!#] is invalid. It must be a digit between '1' and '65535'.]]></key>
<keyname="log_0061"><![CDATA[[ Error ] - The method Get->users_home() was asked to find the home directory for the user: [#!variable!user!#], but was unable to do so.]]></key>
<keyname="log_0062">SSH session opened without a password to: [#!variable!target!#].</key>
<keyname="log_0063"><![CDATA[The database: [#!variable!host!# -> #!variable!name!#] with the UUID: [#!variable!uuid!#] did not respond to pings and 'database::#!variable!uuid!#::ping' is not set to '0' in '#!data!path::configs::anvil.conf!#', skipping it.]]></key>
<keyname="log_0064">[ Warning ] - The database: [#!variable!name!#] on host: [#!variable!host!#] with UUID: [#!variable!uuid!#] can not be used, skipping it.</key>
<keyname="log_0066">Is the database server running on: [#!variable!target!#] and does the target's firewall allow connections on TCP port: [#!variable!port!#]?</key>
<keyname="log_0067"><![CDATA[The password was not passed, and it is required. Please set: [database::#!variable!uuid!#::password = <password>] in: [#!data!path::configs::anvil.conf!#].]]></key>
<keyname="log_0068"><![CDATA[The database user name: [#!variable!user!#] on the host: [#!variable!host!#] is either not the owner of the database: [#!variable!name!#], or the password for that user is incorrect.
<keyname="log_0069">The connection to the database: [#!variable!name!#] on host: [#!variable!host!#:#!variable!port!#] was refused. Is the database server running?</key>
<keyname="log_0070">The connection to the database: [#!variable!name!#] on host: [#!variable!host!#:#!variable!port!#] failed because the name could not be translated to an IP address. Is this database server's host name in '/etc/hosts'?</key>
<keyname="log_0071">Successfully Connected to the database: [#!variable!name!#] (id: [#!variable!uuid!#]) on host: [#!variable!host!#:#!variable!port!#].</key>
<keyname="log_0072"><![CDATA[[ Error ] - The method Database->query() was called without a database ID to query and 'sys::database::read_uuid' doesn't contain a database ID, either. Are any databases available?]]></key>
<keyname="log_0073"><![CDATA[[ Error ] - The method Database->query() was asked to query the database with UUID: [#!variable!uuid!#] but there is no file handle open to the database. Was the connection lost?]]></key>
<keyname="log_0075"><![CDATA[[ Error ] - Failed to prepare the database query: [#!variable!query!#] on: [#!variable!server!#]. The error was: [#!variable!db_error!#]. Note that if the query reports '--', the query was listed as containing sensitive data and '$anvil->Log->secure' is not set.]]></key>
<keyname="log_0076"><![CDATA[[ Error ] - Failed to execute the database query: [#!variable!query!#] on: [#!variable!server!#]. The error was: [#!variable!db_error!#]. Note that if the query reports '--', the query was listed as containing sensitive data and '$anvil->Log->secure' is not set.]]></key>
<keyname="log_0077"><![CDATA[[ Error ] - The method Database->initialize() was called without a database ID to query and 'sys::database::read_uuid' doesn't contain a database ID, either. Are any databases available?]]></key>
<keyname="log_0078"><![CDATA[[ Error ] - The method Database->initialize() was asked to query the database with UUID: [#!variable!uuid!#] but there is no file handle open to the database. Was the connection lost?]]></key>
<keyname="log_0079"><![CDATA[[ Error ] - The method Database->initialize() was asked to initialize the database: [#!variable!server!#] (id: [#!variable!uuid!#]) but a core SQL file to load wasn't passed, and the 'database::#!variable!uuid!#::core_sql' variable isn't set. Unable to initialize without the core SQL file.]]></key>
<keyname="log_0080"><![CDATA[[ Error ] - The method Database->initialize() was asked to initialize the database: [#!variable!server!#] (id: [#!variable!uuid!#]) but the core SQL file: [#!variable!sql_file!#] doesn't exist.]]></key>
<keyname="log_0081"><![CDATA[[ Error ] - The method Database->initialize() was asked to initialize the database: [#!variable!server!#] (id: [#!variable!uuid!#]) but the core SQL file: [#!variable!sql_file!#] exist, but can't be read.]]></key>
<keyname="log_0084"><![CDATA[[ Error ] - The method Database->query() was asked to query the database: [#!variable!server!#] but no query was given.]]></key>
<keyname="log_0085"><![CDATA[[ Error ] - The method Database->write() was asked to write to the database: [#!variable!server!#] but no query was given.]]></key>
<keyname="log_0089"><![CDATA[[ Error ] - The method Database->write() was asked to write to the database with UUID: [#!variable!uuid!#] but there is no file handle open to the database. Was the connection lost?]]></key>
<keyname="log_0090"><![CDATA[[ Error ] - Failed to 'do' the database query: [#!variable!query!#] on: [#!variable!server!#]. The error was: [#!variable!db_error!#]. Note that if the query reports '--', the query was listed as containing sensitive data and '$anvil->Log->secure' is not set.]]></key>
<keyname="log_0093"><![CDATA[[ Error ] - The method Alert->check_alert_sent() was called but the 'modified_date' parameter was not passed and/or 'sys::database::timestamp' is not set. Did the program fail to connect to any databases?]]></key>
<keyname="log_0097"><![CDATA[[ Error ] - The method Alert->check_alert_sent() was called but the 'set' parameter was not passed or it is empty. It should be 'set' or 'clear'.]]></key>
<keyname="log_0098">
[ Warning ] - Failed to set an alert because this host is not yet in the database. This can happen if the alert was set before this host was added to the database.
<keyname="log_0099">[ Error ] - There is no Anvil! database user set for the local machine. Please check: [#!data!path::config::anvil.conf!#]'s DB entry: [#!variable!uuid!#].</key>
<keyname="log_0102">I am not recording the alert with message_key: [#!variable!message_key!#] to the database because its log level was lower than any recipients.</key>
<keyname="log_0103">The local machine's UUID was not read properly. It should be stored in: [#!data!sys::host_uuid!#] and contain hexadecimal characters in the format: '012345-6789-abcd-ef01-23456789abcd' and usually matches the output of 'dmidecode --string system-uuid'. If this file exists and if there is a string in the file, please verify that it is structured correctly.</key>
<keyname="log_0106">The table: [#!variable!table!#] (and possibly others) in the database on: [#!variable!host!#] (UUID: [#!variable!uuid!#]) is behind by: [#!variable!seconds!#] seconds. A database resync will be requested.</key>
<keyname="log_0108"><![CDATA[[ Error ] - The method Database->insert_or_update_states() was called but the 'state_host_uuid' parameter was not passed or it is empty. Normally this is set to 'sys::data_uuid'.]]></key>
<keyname="log_0111">[ Warning ] - Failed to reload the Postgres server. Please check the system logs for details. The updated configuration is probably not active yet.</key>
<keyname="log_0112">Reloaded the PostgreSQL database server.</key>
<keyname="log_0113"><![CDATA[[ Note ] - The 'Database->configure_pgsql() method was called but the parent program is not running with root priviledges. Returning without doing anything.]]></key>
<keyname="log_0114"><![CDATA[The program: [#!data!path::exe::an-report-memory!#] must be called with '--program <name>', but no program name was read in.]]></key>
<keyname="log_0115">#!variable!program!# has started.</key>
<keyname="log_0116"><![CDATA[The method: [#!variable!method!#] was passed the parameter: [#!variable!parameter!#] with the value: [#!variable!value!#], which is invalid.]]></key>
<keyname="log_0117"><![CDATA[The method 'Convert->human_readable_to_bytes()' was passed the byte size: [#!variable!size!#] in the string: [sign: #!variable!sign!#, size: #!variable!size!#, type: #!variable!type!#] contains an illegal value. Sizes can only be integers or real numbers. It may also have commas in it which will be removed automatically.]]></key>
<keyname="log_0118"><![CDATA[The method 'Convert->human_readable_to_bytes()' was passed the byte size: [#!variable!size!#] in the string: [sign: #!variable!sign!#, size: #!variable!size!#, type: #!variable!type!#] appears to be a byte size already but the size does not seem to be an integer. Byte sizes can only be signed integers. It may also have commas in it which will be removed automatically.]]></key>
<keyname="log_0119"><![CDATA[The method 'Convert->human_readable_to_bytes()' method was called with the value: [#!variable!value!#] which we split into the size: [#!variable!size!#] and type: [#!variable!type!#]. The type appears to be invalid.]]></key>
<keyname="log_0120"><![CDATA[The method 'Convert->round()' was passed the number: [#!variable!number!#] which contains an illegal value. Only digits and one decimal place are allowed.]]></key>
<keyname="log_0121">Current memory used by: [#!variable!program_name!#] is approximately: [#!variable!bytes!#] bytes (#!variable!hr_size!#).</key>
<keyname="log_0122">The 'smaps' proc file for the process ID: [#!variable!pid!#] was not found. Did the program just close?</key>
<keyname="log_0123"><![CDATA[[ Error ] - Asked 'pgrep' to return the PIDs (process IDs) of the program: [#!variable!program!#] and a non-digit value was returned in: [#!variable!line!#]. This should not have happened.]]></key>
<keyname="log_0127">Firewalld was not running, re-enabling it. If you do not want this behaviour, please set 'sys::daemons::restart_firewalld = 0' in: [#!data!path::configs::anvil.conf!#].</key>
<keyname="log_0130"><![CDATA[[ Error ] - The method: [#!variable!method!#] was called and the parameter: [#!variable!parameter!#] was passed an invalid UUID: [#!variable!uuid!#].]]></key>
<keyname="log_0133">Failed to read the system UUID. Received a non-UUID string: [#!variable!uuid!#]. Is the user: [#!variable!user!#] in the 'kmem' group?</key>
<keyname="log_0134">The host UUID: [#!variable!uuid!#] does not appear to be a valid UUID. Please check the contents of: [#!data!path::data::host_uuid!#] or the output from: [dmidecode --string system-uuid]. Note that some mainboards will report their UUID as all-0. If this is the case, manually create the 'host.uuid' file with a UUID created by 'uuidgen'.</key>
<keyname="log_0136"><![CDATA[[ Error ] - The method: [#!variable!method!#] was called with either 'job_uuid': [#!variable!job_uuid!#] not being passed (or was not a valid UUID), or 'job_name': [#!variable!job_name!#] not being passed.]]></key>
<keyname="log_0137"><![CDATA[[ Error ] - The method: [#!variable!method!#] was called with an invalid value for: [#!variable!variable_name!#]: -> [#!variable!variable_value!#]. See 'perldoc Anvil::Tools::#!variable!module!#' for valid options.]]></key>
<keyname="log_0138"><![CDATA[[ Error ] - The method: [#!variable!method!#] was with an invalid 'job_progress': [#!variable!job_progress!#]. It needs to be a whole-number value between 0 and 100, inclusive.]]></key>
<keyname="log_0139"><![CDATA[[ Error ] - Failed to initialized the database! The file: [#!variable!file!#] already exists, which should not be the case when initializing the database.]]></key>
<keyname="log_0140"><![CDATA[[ Error ] - Failed to initialized the database! Information on why this failed might be found in: [#!variable!file!#].]]></key>
<keyname="log_0141"><![CDATA[[ Error ] - The system call: [#!variable!shell_call!#] will fail because the program: [#!variable!program!#] doesn't exist.]]></key>
<keyname="log_0142"><![CDATA[[ Error ] - The system call: [#!variable!shell_call!#] will fail because the program: [#!variable!program!#] isn't executable.]]></key>
<keyname="log_0145"><![CDATA[[ Warning ] - Unable to use the database on the host: [#!variable!host!#]. The local Anvil! version is: [#!variable!local_version!#], and the target host's is: [#!variable!target_version!#]. If you are upgrading, we will resync and use it once the host and our version is again the same.]]></key>
<keyname="log_0147">A job to configure the network was found, and it was picked up by: [#!variable!pid!#], but that process is not running and it appears to only be: [#!variable!percent!# %] complete. Taking the job.</key>
<keyname="log_0148">The network: [#!variable!network!#] has something set for the IP [#!variable!ip!#], but it appears to be invalid. Ignoring this network.</key>
<keyname="log_0149">The network: [#!variable!network!#] is not set to be configured. Skipping it.</key>
<keyname="log_0150"><![CDATA[The Storage->backup() method was called with the source file: [#!variable!source_file!#], which does not appear to be a full path and file name (should start with '/').]]></key>
<keyname="log_0151"><![CDATA[The Storage->backup() method was called with the source file: [#!variable!source_file!#], which does not appear to exist.]]></key>
<keyname="log_0152"><![CDATA[The Storage->backup() method was called with the source file: [#!variable!source_file!#], which can not be read (please check permissions and SELinux).]]></key>
<keyname="log_0153"><![CDATA[The Storage->backup() method was called with the source file: [#!variable!source_file!#], which isn't actually a file.]]></key>
<keyname="log_0156"><![CDATA[[ Error ] - The method: [#!variable!method!#] must be called with root-level priviledges.]]></key>
<keyname="log_0157"><![CDATA[[ Error ] - The method Storage->write_file() was asked to write the file: [#!variable!file!#] but it appears to be missing the file name. Aborting.]]></key>
<keyname="log_0159">Adding the target: [#!variable!target!#]:[#!variable!port!#]'s RSA fingerprint to: [#!variable!user!#]'s list of known hosts.</key>
<keyname="log_0160"><![CDATA[[ Error ] - The method Storage->read_file() was asked to read the remote file: [#!variable!file!#] but it is not a full path. Aborting.]]></key>
<keyname="log_0161"><![CDATA[[ Error ] - The method Storage->read_file() was asked to read the remote file: [#!variable!file!#] but it appears to be missing the file name. Aborting.]]></key>
<keyname="log_0162"><![CDATA[[ Error ] - The method Storage->read_file() tried to rsync the remote file: [#!variable!remote_file!#] to the local temporary file: [#!variable!local_file!#], but it did not arrive. There might be more information above.]]></key>
<keyname="log_0165"><![CDATA[The Storage->backup() method was asked to backup the file: [#!variable!source_file!#] on: [#!variable!target!#], but it looks like there was a problem connecting to the target.]]></key>
<keyname="log_0166">About to run the shell command: [#!variable!shell_call!#] on: [#!variable!target!#] as: [#!variable!remote_user!#]</key>
<keyname="log_0167">Failed to create the directory: [#!variable!directory!#] on: [#!variable!target!#] as: [#!variable!remote_user!#]. The error (if any) was: [#!variable!error!#] and the output (if any) was: [#!variable!output!#].</key>
<keyname="log_0168">Failed to create the directory: [#!variable!directory!#]. The error (if any) was: [#!variable!error!#].</key>
<keyname="log_0169">Failed to copy the file: [#!variable!source_file!#] to: [#!variable!target_file!#] on the target: [#!variable!target!#] as: [#!variable!remote_user!#]. The error (if any) was: [#!variable!error!#] and the output (if any) was: [#!variable!output!#].</key>
<keyname="log_0170"><![CDATA[[ Note ] - The method Storage->#!variable!method!#() was asked to copy: [#!variable!source_file!#] to: [#!variable!target_file!#], but the target's parent directory doesn't exist and we were unable to create it.]]></key>
<keyname="log_0171"><![CDATA[[ Error ] - The method: Account->encrypt_password() tried to use the algorithm: [#!variable!algorithm!#], which is not recognized. Only 'sha256', 'sha384' and 'sha512' are currently supported. The desired algorithm can be set via 'sys::password::algorithm'.]]></key>
<keyname="log_0172"><![CDATA[[ Error ] - Asked to validate a password for the user: [#!variable!user!#], but that user wasn't found.]]></key>
<keyname="log_0173"><![CDATA[[ Error ] - Asked to valudate a password encoded with the algorithm: [#!variable!user_algorithm!#], which is not recognized. Only 'sha256', 'sha384' and 'sha512' are currently supported.]]></key>
<keyname="log_0174"><![CDATA[[ Error ] - Asked to update the variable: [#!variable!variable!#] in the configuration file: [#!variable!file!#], but that variable was not found.]]></key>
<keyname="log_0175"><![CDATA[[ Error ] - Asked to update the variable: [#!variable!variable!#] in the configuration file: [#!variable!file!#] on the host: [#!variable!target!#], but that variable was not found.]]></key>
<keyname="log_0187">Host UUID cache file: [#!data!path::data::host_uuid!#] doesn't exists and we're not running as root so we can't read dmidecode. Unable to proceed.</key>
<keyname="log_0191">Connection only to: [#!variable!db_uuid!#], skipping: [#!variable!uuid!#].</key>
<keyname="log_0192">The connection to the database: [#!variable!server!#] has failed. Will attempt to reconnect.</key>
<keyname="log_0193">Switching the default database handle to use the database: [#!variable!server!#] prior to reconnect attempt.</key>
<keyname="log_0194">Switching the default database to read from to the database: [#!variable!server!#] prior to reconnect attempt.</key>
<keyname="log_0195">Ready to try to reconnect to: [#!variable!server!#], but delaying for: [#!variable!delay!#] seconds to give the database a chance to come back online in case this is a transient issue.</key>
<keyname="log_0196">Failed to reconnect to the database, and now no connections remail. Exiting.</key>
<keyname="log_0206"><![CDATA[In Words->parse_banged_string(), while processing: [#!variable!message!#], a variable name was found to be missing.]]></key>
<keyname="log_0207"><![CDATA[Job->update_progress() called without 'job_uuid' being set, and 'jobs::job_uuid' was also not set. Unable to find the job to update.]]></key>
<keyname="log_0208"><![CDATA[Job->update_progress() called with the 'job_uuid': [#!variable!job_uuid!#], which was not found. Unable to find the job to update.]]></key>
<keyname="log_0209"><![CDATA[Job->update_progress() called with 'progress' set to an invalid value: [#!variable!progress!#]. This must be a whole number between '0' and '100' (fractions not allowed).]]></key>
<keyname="log_0211"><![CDATA[The host: [#!variable!host!#] was passed to System->find_matching_ip(), but it failed to resolve to an IP address.]]></key>
<keyname="log_0212">We've been asked to have the new peer add us. We will now wait for the peer to show up in the 'hosts' table and then request the job for it to add us.</key>
<keyname="log_0213">The peer: [#!variable!peer_uuid!#] is not yet in 'hosts', continuing to wait.</key>
<keyname="log_0214">The peer: [#!variable!peer_name!#] is now in 'hosts', proceeding.</key>
<keyname="log_0216">The #!variable!uuid_name!#: [#!variable!uuid!#] was passed in, but no record with that UUID was found in the database.</key>
<keyname="log_0217">The variable with variable_uuid: [#!variable!variable_uuid!#], variable_source_table: [#!variable!variable_source_table!#] and variable_source_uuid: [#!variable!variable_source_uuid!#] was not found in the database, so unable to update.</key>
<keyname="log_0218">The variable: [#!variable!name!#] was expected to be an array reference, but it wasn't. It contained (if anything): [#!variable!value!#].</key>
<keyname="log_0219">The table: [#!variable!table!#] (and possibly others) in the database on: [#!variable!host!#] (UUID: [#!variable!uuid!#]) is missing: [#!variable!missing!#] row(s). A database resync will be requested.</key>
<keyname="log_0221">Writing: [#!variable!to_write!#] record(s) to resync the table: [#!variable!table!#] in database on: [#!variable!host_name!#].</key>
<keyname="log_0224">The system has only been running for: [#!variable!uptime!#] seconds. To minimize the impact of a bug causing a rapid reboot cycle, the request to: [#!variable!task!#] will be paused until the system has been running for at least ten minutes. We will proceed in: [#!variable!difference!#] seconds (at #!variable!say_time!#).</key>
<keyname="log_0225">power off</key>
<keyname="log_0226">reboot</key>
<keyname="log_0227">Delay complete, proceeding with the #!variable!task!# operation now.</key>
<keyname="log_0228">Failed to read the file: [#!variable!file!#]. It might not exist, so we will try to write it now.</key>
<keyname="log_0229">The body of the file: [#!variable!file!#] does not match the new body. The file will be updated.</key>
<keyname="log_0230">
The body of the file: [#!variable!file!#] does not match the new body. The file will be updated. The changes are:
==========
#!variable!diff!#
==========
</key>
<keyname="log_0231">The file: [#!variable!file!#] is already the same as the passed in body, so no update is needed.</key>
<keyname="log_0232">The file: [#!variable!file!#] will now be updated.</key>
<keyname="log_0233">There was a problem updating file: [#!variable!file!#], expected the write to return '0' but got: [#!variable!return!#]. Please check the logs for details.</key>
<keyname="log_0235">Refreshing RPM repository has been disabled in [#!data!path::configs::anvil.conf!#] ('install-manifest::refresh-packages' is set). Not refreshing.</key>
<keyname="log_0236">Skipping the RPM repository refresh. The next scheduled refresh will be done in: [#!variable!next_refresh!#] second(s). Override with '--force'.</key>
<keyname="log_0237">RPM repository refresh required, [#!data!path::directories::packages!#] doesn't exist (likely this is the first run or the directory was deleted).</key>
<keyname="log_0238">RPM repository refresh required, it has been more than: [#!variable!seconds!#] seconds since the last refresh (or no previous refresh was logged).</key>
<keyname="log_0244">[ Warning ] - None of the databases are accessible. ScanCore will try to connect once a minute until a database is accessible.</key>
<keyname="log_0245">[ Cleared ] - We now have databases accessible, proceeding.</key>
<keyname="log_0246">[ Warning ] - The local system is not yet configured. Scancore will check once a minute and start running once configured.</key>
<keyname="log_0247">[ Cleared ] - The local system is now configured, proceeding.</key>
<keyname="log_0249">----=] ScanCore loop finished. Sleeping for: [#!variable!run_interval!#] seconds. ]=--------------------------------------</key><!-- This is meant to be easily seen in the logs, hence the dashes. -->
<keyname="log_0250">
The md5sum of: [#!variable!file!#] has changed since the daemon started.
<keyname="log_0257">[ Warning ] - It appears that we failed to downloaded and save: [#!variable!file!#].</key>
<keyname="log_0258">[ Warning ] - It appears that we failed to downloaded and save: [#!variable!file!#]. The output file has no size, and will be removed.</key>
<keyname="log_0262">[ Error ] - Storage->scan_directory() was asked to scan: [#!variable!directory!#], but it doesn't exist or isn't actually a directory.</key>
<keyname="log_0264">Checking: [#!data!path::directories::shared::incoming!#] for new files.</key>
<keyname="log_0265">About to calculate the md5sum for the file: [#!variable!file!#].</key>
<keyname="log_0266">This file is large, [#!variable!size!#], this might take a bit of time...</key>
<keyname="log_0267">Failed to move the file: [#!variable!source_file!#] to: [#!variable!target_file!#] on the target: [#!variable!target!#] as: [#!variable!remote_user!#]. The error (if any) was: [#!variable!error!#] and the output (if any) was: [#!variable!output!#].</key>
<keyname="log_0268">The file: [#!variable!file!#] has been added to the database (if needed) moved to: [#!variable!target!#].</key>
<keyname="log_0269">The file: [#!variable!file!#] should exist, but doesn't. We will try to find it now.</key>
<keyname="log_0270">The user: [#!variable!user!#] doesn't appear to have an SSH key yet. Will create it now. This could take some time, depending on how long it takes to collect entropy. If this appears to not be responding, move the mouse or do other things to generate activity on the host.</key>
<keyname="log_0271">
The user: [#!variable!user!#]'s SSH key yet has been generated. The output is below;
====
#!variable!output!#
====
</key>
<keyname="log_0272">The user: [#!variable!user!#] doesn't appear to have a base SSH directory. Will now create: [#!variable!directory!#].</key>
<keyname="log_0276">Found the missing file: [#!variable!file!#] on: [#!variable!host_name!# (#!variable!ip!#]). Downloading it now...</key>
<keyname="log_0277">Downloaded the file: [#!variable!file!#]. Generating md5sum from local copy now...</key>
<keyname="log_0278">The md5sum of file: [#!variable!file!#] matches what we expected!</key>
<keyname="log_0279">The md5sum of file: [#!variable!file!#] failed to match. Discarding the downloaded file.</key>
<keyname="log_0280">Failed to download: [#!variable!file!#] from: [#!variable!host_name!# (#!variable!ip!#). Will look on other hosts (if any left).</key>
<keyname="log_0281">The file: [#!variable!file!#] on: [#!variable!host_name!# (#!variable!ip!#]) doesn't match the file we're looking for.
<keyname="log_0286">[ Error ] - The URL: [#!variable!url!#] to download appears to be invalid.</key>
<keyname="log_0287">[ Error ] - The requested URL: [#!variable!url!#] was not found on the remote server.</key>
<keyname="log_0288">[ Error ] - The requested URL: [#!variable!url!#] does not resolve to a known domain.</key>
<keyname="log_0289">[ Error ] - The requested URL: [#!variable!url!#] failed because the remote host refused the connection.</key>
<keyname="log_0290">[ Error ] - The requested URL: [#!variable!url!#] failed because there is no route to that host.</key>
<keyname="log_0292">[ Error ] - The requested URL: [#!variable!url!#] failed because the network is unreachable.</key>
<keyname="log_0293">[ Error ] - The requested URL: [#!variable!url!#] failed for an unknown reason.</key>
<keyname="log_0294"><![CDATA[[ Error ] - The method Convert->time() was passed the 'time' of: [#!variable!time!#] which does not appear to be a whole number.]]></key>
<keyname="log_0295"><![CDATA[[ Error ] - The method Remote->call() was passed the 'timeout' of: [#!variable!timeout!#] which does not appear to be a whole number.]]></key>
<keyname="log_0296">We have a connection open already to: [#!variable!connection!#], skipping connect stage.</key>
<keyname="log_0299">We were asked to promote: [#!variable!server!#], which makes no sense and is not supported. Ignoreing.</key>
<keyname="log_0300">We were asked to demote: [#!variable!server!#], which makes no sense and is not supported. Ignoreing.</key>
<keyname="log_0301">We were asked to notify, but this is not a promotable (we're stateless) agent. Ignoring.</key>
<keyname="log_0302">We were invoked with an unexpected (or no) command. Environment variables and arguments below.</key>
<keyname="log_0303">We've been asked to start the server: [#!variable!server!#].</key>
<keyname="log_0304">It appears that the list the currently running servers returned a non-zero return code: [#!variable!return_code!#]. We will proceed as we may be able to fix this. The output, if any, was: [#!variable!output!#].</key>
<keyname="log_0307">All tests passed, yet the attempt to boot the server: [#!variable!server!#] exited with a non-zero return code: [#!variable!return_code!#]. The server is in an unknown state, so exiting with a fatal error. Human intervention is now required. The output, if any, was: [#!variable!output!#].</key>
<keyname="log_0308">It appears that the call to boot the server: [#!variable!server!#] worked, but the call to list running servers exited with a non-zero return code: [#!variable!return_code!#]. The server is in an unknown state, so exiting with a fatal error. Human intervention is now required. The output, if any, was: [#!variable!output!#].</key>
<keyname="log_0309">The server: [#!variable!server!#] has started successfully.</key>
<keyname="log_0310">The server: [#!variable!server!#] should have been started, but it's state is: [#!variable!state!#]. Human intervention is required!</key>
<keyname="log_0311">The server: [#!variable!server!#] should have been started, but it wasn't found in the list of running servers.</key>
<keyname="log_0312">The attempt to list the running servers returned a non-zero return code: [#!variable!return_code!#]. The output, if any, was: [#!variable!output!#].</key>
<keyname="log_0313">The server: [#!variable!server!#] is running. We will ask it to shut down now.</key>
<keyname="log_0314">The server: [#!variable!server!#] is paused. Resuming it now so that it can react to the shutdown request.</key>
<keyname="log_0315">The attempt to resume the server: [#!variable!server!#] returned a non-zero return code: [#!variable!return_code!#]. The output, if any, was: [#!variable!output!#].</key>
<keyname="log_0316">Pausing for a moment to give the server time to resume.</key>
<keyname="log_0317">The server: [#!variable!server!#] is asleep. Waking it now so that it can react to the shutdown request.</key>
<keyname="log_0318">The attempt to wake the server: [#!variable!server!#] returned a non-zero return code: [#!variable!return_code!#]. The output, if any, was: [#!variable!output!#].</key>
<keyname="log_0319">Pausing for half a minute to give the server time to wake up.</key>
<keyname="log_0320">The server: [#!variable!server!#] is already shutting down. We'll monitor it until it actually shuts off.</key>
<keyname="log_0321">The server: [#!variable!server!#] is already off.</key>
<keyname="log_0322">The server: [#!variable!server!#] is hung. Its state is: [#!variable!state!#]. We will force it off now.</key>
<keyname="log_0323">The attempt to force-off the server: [#!variable!server!#] returned a non-zero return code: [#!variable!return_code!#]. The output, if any, was: [#!variable!output!#].</key>
<keyname="log_0324">The server: [#!variable!server!#] is now off.</key>
<keyname="log_0325">The server: [#!variable!server!#] is running, but it is in an unexpected state: [#!variable!state!#]. Human intervention is required!</key>
<keyname="log_0326">The server: [#!variable!server!#] was not listed on this node, so it is not running here.</key>
<keyname="log_0327">Asking the server: [#!variable!server!#] to shut down now. Please be patient.</key>
<keyname="log_0328">The attempt to shut down the server: [#!variable!server!#] returned a non-zero return code: [#!variable!return_code!#]. The output, if any, was: [#!variable!output!#].</key>
<keyname="log_0329">The server: [#!variable!server!#] is no longer listed. It is now off.</key>
<keyname="log_0330">The server: [#!variable!server!#] is not off yet, waiting a few seconds and then we'll check again.</key>
<keyname="log_0331">The environment variable 'OCF_RESKEY_CRM_meta_timeout' was not set, so setting it to: [#!variable!timeout!#].</key>
<keyname="log_0332">The 'virsh' call exited with the return code: [#!variable!return_code!#]. The 'libvirtd' may have failed to start. We won't wait any longer.</key>
<keyname="log_0333">The 'virsh' call exited with the return code: [#!variable!return_code!#]. The 'libvirtd' service might be starting, so we will check again shortly.</key>
<keyname="log_0334">It would appear that libvirtd is not operating (or not operating correctly). Expected the return code '0' but got: [#!variable!return_code!#].</key>
<keyname="log_0335">
Output of: [#!variable!command!#] was;
==========
#!variable!output!#
==========
</key>
<keyname="log_0336">The server: [#!variable!server!#] is: [#!variable!state!#], which is OK.</key>
<keyname="log_0337">The server: [#!variable!server!#] is: [#!variable!state!#].</key>
<keyname="log_0338">The server: [#!variable!server!#] is in a bad state: [#!variable!state!#]!</key>
<keyname="log_0339">The server: [#!variable!server!#] is in an unexpected state: [#!variable!state!#]!</key>
<keyname="log_0340">The server: [#!variable!server!#] is not running on this node.</key>
<keyname="log_0341">We're pushing the: [#!variable!server!#] to: [#!variable!target!#].</key>
<keyname="log_0342">It appears that the call to check if the server: [#!variable!server!#] is on this node returned a non-zero return code: [#!variable!return_code!#]. The output, if any, was: [#!variable!output!#].</key>
<keyname="log_0343">The server: [#!variable!server!#] state is: [#!variable!state!#]. A server must be 'running' in order to migrate it.</key>
<keyname="log_0344">The server: [#!variable!server!#] wasn't found on this machine.</key>
<keyname="log_0345">Verifying that the server: [#!variable!server!#] was successfully migrated here.</key>
<keyname="log_0346">While verifying that the server: [#!variable!server!#] migrated here, the attempt to list servers running here returned a non-zero return code: [#!variable!return_code!#]. The output, if any, was: [#!variable!output!#].</key>
<keyname="log_0347">The migration of the server: [#!variable!server!#] to here was successful!</key>
<keyname="log_0348">It looks like we were called to verify that the: [#!variable!server!#] migrated here, but it isn't here yet. We'll proceed with an attempt to pull the server over.</key>
<keyname="log_0350">Temporarily enabling dual primary for the resource: [#!variable!resource!#] to the node: [#!variable!target_name!# (#!variable!target_node_id!#].</key>
<keyname="log_0351">The attempt to enable dual-primary for the resource: [#!variable!resource!#] to the node: [#!variable!target_name!# (#!variable!target_node_id!#)] returned a non-zero return code [#!variable!return_code!#]. The returned output (if any) was: [#!variable!output!#].</key>
<keyname="log_0352">The migration of: [#!variable!server!#] to the node: [#!variable!target!#] will now begin.</key>
<keyname="log_0353">The attempt to migrate the server: [#!variable!server!#] to the node: [#!variable!target!#] returned a non-zero return code [#!variable!return_code!#]. The returned output (if any) was: [#!variable!output!#].</key>
<keyname="log_0355">Re-disabling dual primary by restoring config file settings.</key>
<keyname="log_0356">The attempt to reset DRBD to config file settings returned a non-zero return code: [#!variable!return_code!#]. The output, if any, was: [#!variable!output!#].</key>
<keyname="log_0357">Failure, exiting with '1'.</key>
<keyname="log_0358">It appears that the call to list the running servers on the migration target: [#!variable!target!#] returned a non-zero return code: [#!variable!return_code!#]. The output, if any, was: [#!variable!output!#].</key>
<keyname="log_0362">- Server definition was read.</key>
<keyname="log_0363">- Server name is valid.</key>
<keyname="log_0364">- Eumlator is valid.</key>
<keyname="log_0365">- Sufficient RAM is available.</key>
<keyname="log_0366">- Network bridge(s) are available.</key>
<keyname="log_0367">- Storage is valid and ready.</key>
<keyname="log_0368">The bridge: [#!variable!bridge!#] is available for this server.</key>
<keyname="log_0369">The server wants to connect to the bridge: [#!variable!bridge!#] which we do not have on this node.</key>
<keyname="log_0370">The attempt to read the DRBD configuration returned a non-zero code: [#!variable!return_code!#]. The returned output (if any) was: [#!variable!drbd_body!#].</key>
<keyname="log_0371">Recording the local connection details for the resource: [#!variable!resource!#] -> [#!variable!address!#:#!variable!port!#].</key>
<keyname="log_0372">Recording the peer's connection details for the resource: [#!variable!resource!#] -> [#!variable!address!#:#!variable!port!#].</key>
<keyname="log_0373">Checking that the DRBD device: [#!variable!device_path!#] is ready.</key>
<keyname="log_0374">The server wants to use: [#!variable!drbd_device!#] as a hard drive, but we couldn't find the backing logical volume: [#!variable!lv_path!#] on this node.</key>
<keyname="log_0375">The server wants to use: [#!variable!drbd_device!#] as a hard drive, but the backing logical volume: [#!variable!lv_path!#] is inactive and an attempt to activate it failed.</key>
<keyname="log_0376">The server wants to use: [#!variable!drbd_device!#] as a hard drive, which is backed by the logical volume: [#!variable!lv_path!#]. It is ready to use.</key>
<keyname="log_0377">The attempt to read the DRBD status returned a non-zero code: [#!variable!return_code!#]. The returned output (if any) was: [#!variable!status_json!#].</key>
<keyname="log_0380">The attempt to start the DRBD resource: [#!variable!resource!#] returned a non-zero code: [#!variable!return_code!#]. The returned output (if any) was: [#!variable!output!#].</key>
<keyname="log_0381">Pausing briefly to give the resources time to start.</key>
<keyname="log_0382">The attempt to read the DRBD status after bringing up the resource(s) for this server returned a non-zero code: [#!variable!return_code!#]. The returned output (if any) was: [#!variable!status_json!#].</key>
<keyname="log_0383">The attempt to read the DRBD status after bringing up the resource(s) appears to have failed.</key>
<keyname="log_0384">The DRBD resource: [#!variable!resource!#] backing the device: [#!variable!device_path!#] was not seen in the 'drbdsetup' status data. Attempting to bringing it up now.</key>
<keyname="log_0385">Checking the DRBD status again.</key>
<keyname="log_0386">The DRBD resource: [#!variable!resource!#] backing the device: [#!variable!device_path!#] was not able to start.</key>
<keyname="log_0387">Checking that the peer's DRBD resources are Connected and UpToDate prior to migration.</key>
<keyname="log_0388">The local replicated disk: [#!variable!device_path!#] is used by this server. Checking it out now.</key>
<keyname="log_0389">The DRBD resource: [#!variable!resource!#] volume: [#!variable!volume!#] local disk state is: [#!variable!disk_state!#]. Unsafe to run the server unless the local disk state is UpToDate.</key>
<keyname="log_0390">The DRBD resource: [#!variable!resource!#] volume: [#!variable!volume!#] local disk state is: [#!variable!disk_state!#], good.</key>
<keyname="log_0394">Ignoring the connection to: [#!variable!peer_short_name!#], it isn't the migration target.</key>
<keyname="log_0395">The DRBD resource: [#!variable!resource!#] on the peer: [#!variable!name!#] is not UpToDate (or SyncSource). Refusing to migrate.</key>
<keyname="log_0396">Ignoring the local replicated disk: [#!variable!device_path!#], it is not used by this server.</key>
<keyname="log_0397">Checking that the optical disc image: [#!variable!file!#] exists.</key>
<keyname="log_0398">The server has the ISO: [#!variable!file!#] mounted in its optical drive, but that file doesn't exist on this system.</key>
<keyname="log_0399">The server has the ISO: [#!variable!file!#] mounted in its optical drive, which we have, but we can't read it. Check permissions and for SELinux denials.</key>
<keyname="log_0400">The server has the ISO: [#!variable!file!#] mounted in its optical drive, which we have.</key>
<keyname="log_0401">The server wants to use the emulator: [#!variable!emulator!#] which doesn't exist on this node. Was this server migrated from a different generation Anvil! system? Please update '<emulator>...</emulator>' in the server's definition file: [#!variable!definition_file!#].</key>
<keyname="log_0402">The server wants to use the emulator: [#!variable!emulator!#] which exists, but we can't run. Please check permissions and for SELinux denials.</key>
<keyname="log_0403">The configured server name: [#!variable!server!#] does not match the name of the server in the definition file: [#!variable!name!#]!</key>
<keyname="log_0404">The configured server name: [#!variable!name!#] needs: [#!variable!ram!# (#!variable!ram_bytes!# bytes)] of RAM, but only: #!variable!available_ram!# (#!variable!available_ram_bytes!# bytes)] are available!</key>
<keyname="log_0405">The definition file: [#!variable!definition_file!#] for the server: [#!variable!server!#] does not exist here!</key>
<keyname="log_0406">The definition file: [#!variable!definition_file!#] for the server: [#!variable!server!#] can not be read!</key>
<keyname="log_0408">The server: [#!variable!server!#] no longer needs the DRBD resource: [#!variable!resource!#]. Taking it down on peer: [#!variable!peer!#] (via IP: #!variable!peer_ip!#) and then taking it down locally.</key>
<keyname="log_0409">The server's disk: [#!variable!device_path!#] is part of the resource: [#!variable!resource!#] which was already taken down.</key>
<keyname="log_0410">The DRBD resource: [#!variable!resource!#] local role is: [#!variable!role!#]. Promoting to primary now.</key>
<keyname="log_0411">
Failed to promote the DRBD resource: [#!variable!resource!#] primary. Expected a zero return code but got: [#!variable!return_code!#]. The output, if any, is below:
<keyname="log_0412">The server: [#!variable!server!#] is already on this node in the state: [#!variable!state!#], aborting the migration request.</key>
<keyname="log_0414">The DRBD device: [#!variable!drbd_device!#] wasn't found in any DRBD resources on this machine.</key>
<keyname="log_0415">- Seeing if the server: [#!variable!server!#] is running already.</key>
<keyname="log_0416">The server: [#!variable!server!#] is already running. Exiting successfully.</key>
<keyname="log_0417">The server: [#!variable!server!#] is already running on: [#!variable!host!#]. This appears to be a DR host, which is outside pacemaker. Exiting with OCF_ERR_CONFIGURED (6) to prevent pacemaker from trying to start the server on the other node.</key>
<keyname="log_0418">The server: [#!variable!server!#] is already running on: [#!variable!host!#]. This appears to be our peer. Exiting with OCF_ERR_INSTALLED (5) to tell pacemaker to try to start it on the other node.</key>
<keyname="log_0419">The server: [#!variable!server!#] needs the DRBD resource: [#!variable!resource!#]. Bringing it up locally and on the peer: [#!variable!peer!#] (via IP: #!variable!peer_ip!#).</key>
<keyname="log_0420">DRBD's 'auto-promote' is disabled. Promoting the resource: [#!variable!resource!#].</key>
<keyname="log_0421">The server: [#!variable!server!#] is now running on the host: [#!variable!host!#].</key>
<keyname="log_0422">The request to shutdown the server: [#!variable!server!#] was given the wait period of: [#!variable!wait!#], which is not a valid number of seconds.</key>
<keyname="log_0423">The server: [#!variable!server!#] is already off.</key>
<keyname="log_0424">The server: [#!variable!server!#] will now be forced off!</key>
<keyname="log_0425">The server: [#!variable!server!#] will now be gracefully shut down.</key>
<keyname="log_0426">The server: [#!variable!server!#] is now off.</key>
<keyname="log_0427">[ Warning ] - The server: [#!variable!server!#] is not yet off after: [#!variable!wait!#] seconds. Giving up waiting.</key>
<keyname="log_0428">[ Error ] - The server: [#!variable!server!#] can't by migrated to: [#!variable!target!#] because the resource: [#!variable!resource!#] isn't connected. The current connection state is: [#!variable!connection_state!#].</key>
<keyname="log_0429">[ Error ] - The server: [#!variable!server!#] can't by migrated to: [#!variable!target!#] because we can't reach it at all right now.</key>
<keyname="log_0430">The migration of the server: [#!variable!server!#] over to: [#!variable!target!#] isn't needed, it's already running on the target. Exiting successfully.</key>
<keyname="log_0431">All DRBD resources appear to be up, skipping individual DRBD resource startup.</key>
<keyname="log_0432"><![CDATA[Database->archive_database() was not passed an array reference of tables to archive. Please pass an array reference using the 'tables' parameter.]]></key>
<keyname="log_0433">The 'smaps' proc file for the process ID: [#!variable!pid!#] was not found. Did the program just close?</key>
<keyname="log_0435">Program: [#!variable!program!#] running as the real user: [#!variable!real_user!# (#!variable!real_uid!#)] and effective user: [#!variable!effective_user!# (#!variable!effective_uid!#)].</key>
<keyname="log_0445"><![CDATA[[ Note ] - We're about to do a ping scan of: [#!variable!range!#]. This could take a long time, please be patient! If you think this process is hung, please run 'pgrep nmap' on the host. If a process is returned, this is still running. We go slow to avoid upsetting network security devices or admin.]]></key>
<keyname="log_0446">Found the network device: [#!variable!mac!#] (owned by #!variable!company!#) using the IP address: [#!variable!ip!#].</key>
<keyname="log_0453">Archiving: [#!variable!records!#] over: [#!variable!loops!#] segments from the table: [#!variable!table!#] from the database on: [#!variable!host!#]. This might take a bit, please be patient.</key>
<keyname="log_0455">The file to be compressed: [#!variable!file!#] has a current size of: [#!variable!size!#]. Please be patient, this can take a bit of time.</key>
<keyname="log_0456">The compressed file is: [#!variable!file!#] is: [#!variable!size!#], a reduction of: [#!variable!difference!#]. The compression took: [#!variable!took!#].</key>
<keyname="log_0464">About to bring up the network interface: [#!variable!interface!#]</key>
<keyname="log_0465">About to rename the network interface: [#!variable!old_interface!#] to: [#!variable!new_interface!#]</key>
<keyname="log_0466">Disconnected from all databases and closing all open SSH sessions. Will reconnect after the network configuration changes have taken effect.</key>
<keyname="log_0467">Network reconfiguration is complete!</key>
<keyname="log_0472">The unified fences metadata file: [#!data!path::data::fences_unified_metadata!#] doesn't exist yet. It will be created now.</key>
<keyname="log_0473">The unified fences metadata file: [#!data!path::data::fences_unified_metadata!#] will be refreshed on user request (--refresh passed).</key>
<keyname="log_0474">The unified fences metadata file: [#!data!path::data::fences_unified_metadata!#] old and will now be refreshed.</key>
<keyname="striker_0001">Welcome! Lets setup your #!string!brand_0003!# dashboard...</key>
<keyname="striker_0002">We're going to ask you a few questions so that we can set things up for your environment. If you need help at any time, just click on the "[?]" icon in the top-right. Let's get started!</key>
<keyname="striker_0003">Organization name</key>
<keyname="striker_0004">This is the name of the company, organization or division that owns or maintains this #!string!brand_0006!#. This is a descriptive field and you can enter whatever makes most sense to you.</key>
<keyname="striker_0005">Prefix</key>
<keyname="striker_0006">This is a two to five character prefix used to identify this organization. It is used as the prefix for host names for dashboards, nodes and foundation pack equipment. You can use letters and numbers and set whatever makes sense to you.</key>
<keyname="striker_0007">Domain Name</key>
<keyname="striker_0008">This is the domain name you would like to use for this dashboard. This will also be used as the default domain used when creating new install manifests.</key>
<keyname="striker_0009">Sequence Number</key>
<keyname="striker_0010">If this is your first Striker, set this to '1'. If it is the second one, set '2'. If it is the third, '3' and so on.</key>
<keyname="striker_0012"><![CDATA[How many internal networks will this dashboard have access to? In most cases, this is just '1'.<br /><b>NOTE</b>: You must have a network interface for the back-channel network, plus one for each internal network. If you have two interfaces for each network, we will setup bonds for redundancy automatically.]]></key>
<keyname="striker_0018">Back-Channel Network link #!variable!number!#</key>
<keyname="striker_0019">This is where you configure the network to enable access this Back-Channel Network.</key>
<keyname="striker_0020">Storage Network link #!variable!number!#</key>
<keyname="striker_0021">This is where you configure the network to enable access this Storage Network.</key>
<keyname="striker_0022">Internet-Facing Network link #!variable!number!#</key>
<keyname="striker_0023">This is where you configure the network to enable access this Internet-Facing Network.</key>
<keyname="striker_0024">IP Address</key>
<keyname="striker_0025">Subnet</key>
<keyname="striker_0026">Gateway</key>
<keyname="striker_0027">DNS Server</key>
<keyname="striker_0028">Network Interface</key>
<keyname="striker_0029">Primary Interface</key>
<keyname="striker_0030">Backup Interface</key>
<keyname="striker_0031">Striker user name</key>
<keyname="striker_0032">This is the user name that you will log into Striker as and the name of the user that owns the database.</key>
<keyname="striker_0033">Striker password</key>
<keyname="striker_0034"><![CDATA[This will be the password used to log into this Striker and connect to its database. It must be 6+ characters long.<br /><b>NOTE</b>: This password needs to be stored in plain text. Do not use a password you use elsewhere.]]></key>
<keyname="striker_0035">Gateway</key>
<keyname="striker_0036">This is the network gateway used to access the outside world.</key>
<keyname="striker_0037">DNS</key>
<keyname="striker_0038">This is the domain name server(s) to use when resolving domain names. You can specify 2 or more, separated by commas.</key>
<keyname="striker_0039">Gateway Interface</key>
<keyname="striker_0040">This is the interface with the internet access. Usually this is "ifn_link1".</key><!-- Translation note; leave 'ifn_link1' as it is, it is the device name. -->
<keyname="striker_0041">We're almost ready! Does this look right? If so, we'll setup this Striker dashboard.</key>
<keyname="striker_0042">What we are planning to do...</key>
<keyname="striker_0043">Apply New Configuration</key>
<keyname="striker_0047">A job to reconfigure this Striker is underway. It is: [#!variable!percent!#%] done. It last updated its progress at: [#!variable!timestamp!#] (#!variable!seconds_ago!# seconds ago). Please try again shortly.</key>
<keyname="striker_0048">This indicates that this machine has been configured. After an initial install, this variable won't exist. If it is set to '0', it will trigger a reconfiguration of the local system.</key>
<keyname="striker_0055">When you sync with a peer, this machine's data will be copied to and recorded on the peer's database. Data gathered by ScanCore will also be kept in sync on both dashboards, and any general purpose data collected by other dashboards while this one is offline will be copied back when this machine comes online. Should this machine ever be rebuilt, data recorded from before the rebuild will be automatically restored as well.</key>
<keyname="striker_0057">This will update this system using any available software repositories. You can also use this to create or load update packs to allow for the update of offline or air-gapped Anvil! systems.</key>
<keyname="striker_0059">Update the network configuration for this Striker.</key>
<keyname="striker_0060">Welcome!</key>
<keyname="striker_0061">Create or manage Anvil! systems</key>
<keyname="striker_0062">Manage this Striker system and sync with others</key>
<keyname="striker_0063">Log out</key>
<keyname="striker_0064">Help and support</key>
<keyname="striker_0065"><![CDATA[Forgot your password?<br />Use '<span class="code">anvil-change-password</span>' from the console to reset it.]]></key>
<keyname="striker_0066">Access to this machine via: [#!variable!network!#].</key>
<keyname="striker_0073">When checked, the Anvil! will ping the peer before trying to connect to the database. This speeds up skipping a database that is offline, but won't help if the databsae is behind a router. When unchecked, connections will be a touch faster when the database is available.</key>
<keyname="striker_0074">When checked, the peer will be configured to add the local database as a peer at the same time that we add it to this system.</key>
<keyname="striker_0076"><![CDATA[This tells Striker how to connect to the peer. The default username is '<span class="fixed_width">admin</span>', and the default port is '<span class="fixed_width">5432</span>'. If the peer uses these, then you only need to specify the IP address or host name of the peer. If the user name is not '<span class="fixed_width">admin</span>', then you need to use the format '<span class="fixed_width">user@host</span>. If the TCP port is not '<span class="fixed_width">5432</span>', then you need to use '<span class="fixed_width">host:port</span>. If both user and port are different, use the format '<span class="fixed_width">user@host:port</span>'.]]></key>
<keyname="striker_0077"><![CDATA[If '#!string!striker_0072!#' is set, we will need to update the peer's configuration. If the peer's SSH port is not '<span class="fixed_width">22</span>', you can append: '<span class="fixed_width">,ssh=X</span>' where 'X' is the SSH TCP port.]]></key>
<keyname="striker_0078">Please verify</key>
<keyname="striker_0079">Peer</key>
<keyname="striker_0080">Ping before connect</key>
<keyname="striker_0081">The test connection was successful. When saved, the resynchronization process might take a few minutes, and cause maintenance periods where some features are offline until complete.</key>
<keyname="striker_0083">Would you like to reconfigure this machine? If you confirm, Striker will re-run the initial configuration. Connections to peers and database data will be retained.</key>
<keyname="striker_0084">Confirmed</key>
<keyname="striker_0085">This Striker has been marked as reconfigured. Reload to start the confguration process.</key>
<keyname="striker_0086">Would you like to update the operating system on this machine? This Striker will be placed into maintenance mode until the update completes.</key>
<keyname="striker_0087">When enabled on a Striker dashboard, the web interface will be disabled and ScanCore will not record to the local database. When enabled on a node, no servers will be allowed to run on it, and any already running on it will be migrated. When run on a DR node, that node will be disconnected from storage and no servers will be allowed to run on it. When disabled, all normal functions are available</key>
<keyname="striker_0088">The system will be updated momentarily. This system will now be in maintenance mode until the update is complete.</key>
<keyname="striker_0095">This will power off the Striker machine and leave it off. To power it back on, you will need physical access or cycle the power of the PDU feeding this Striker.</key>
<keyname="striker_0100">Reboot this system? If you proceed, you will be logged out and this system will be rebooted. Please be sure you have access in the rare chance that the system fails to boot back up.</key>
<keyname="striker_0101">Power off this system? If you proceed, you will be logged out and this system will be powered off. You will need physical access to the machine to turn it back on in most cases. A properly condigured Striker dashboard will power on after a power cycle (via a PDU) or any machine with IPMI if you have access to a machine on the BCN.</key>
<keyname="striker_0102">The peer will be added to the local configuration shortly. Expect slight performance impacts if there is a lot of data to synchronize.</key>
<keyname="striker_0103">The peer will be added to the local configuration shortly, and we will be added to their configuration as well. Expect slight performance impacts if there is a lot of data to synchronize.</key>
<keyname="striker_0104">The peer will be removed from to the local configuration shortly. Any existing data will remain but no further data will be shared.</key>
<keyname="striker_0105"><![CDATA[Are you sure that you want to remove the peer: [<span class="code">#!variable!peer!#</span>]? If so, no further data from this system will be written to the peer. Do note that any existing data will remain and will be reused if you add the peer back again.]]></key>
<keyname="striker_0106">Indicates when the last time the host system's RPM repository was refreshed. If the last refresh failed, this will be incremented by one day before another attempt is made (regardless of 'install-manifest::refresh-period' setting).</key>
<keyname="striker_0109"><![CDATA[<span class="disabled">'Install Target' Not Available</span>]]></key>
<keyname="striker_0110">The 'Install Target' feature is used to do base (stage 1) installs on new or rebuilt Striker dashboards, Anvil! nodes or Disaster Recivery hosts. Specifically, it allows machines to boot off their BCN network interface and install the base operating system.</key>
<keyname="striker_0111">The 'Install Target' disable job has been requested. It should be completed in a few moments. You may need to reload the next page in a minute to see that it has been enabled.</key>
<keyname="striker_0112">The 'Install Target' enabled job has been requested. It should be completed in a few moments. You may need to reload the next page in a minute to see that it has been disabled.</key>
<keyname="striker_0118">Prepare a new machine for use as an Anvil! node or DR (disaster recovery) host. This process will setup the repository, install the appropriate anvil packages and link it to the Anvil! databases on the Strikers you choose.</key>
<keyname="striker_0124"><![CDATA[The test connection was successful! If you proceed with initialization, the target will have the Alteeve repo added and: [#!variable!package!#] installed. The target will also be configured to use our database.]]></key>
<keyname="striker_0129">The target will now be initialized. How long this takes will depend on how fast files can be downloaded and, when needed, how long it takes to register with Red Hat and add the needed repositories.</key>
<keyname="striker_0130">Configure the network on a node or DR host.</key>
<keyname="striker_0131">This option will allow old machine keys to be removed. This is not currently needed.</key>
<keyname="striker_0132">There are one or more broken keys, blocking access to target machines. If a target has been rebuilt, you can clear the old keys here.</key>
<keyname="striker_0133">Manage Changed Keys</key>
<keyname="striker_0134">There are no known bad keys at this time.</key>
<keyname="striker_0135">Add or remove Striker peers.</key>
<keyname="striker_0136">Peer dashboards are Striker machines whose databases this Striker will use to record data. If this machine ever needs to be replaced, or goes offline for a period of time, it will automatically pull the data back from any peers that it is missing.</key>
<keyname="striker_0137"><![CDATA[
The machines responding when we try to connect to the targets below are responding with a different "fingerprint". This indicates that the target is no longer the machine we saw before.<br/>
<br/>
<spanclass="warning">Warning</span>: If you haven't rebuilt the target, then the "broken key" could actually be a "<ahref="https://en.wikipedia.org/wiki/Man-in-the-middle_attack"target="_new"class="highlight">man in the middle<a/>" attack. Verify that the target has changed for a known reason before proceeding!<br/>
<br/>
If you are comfortable that the target has changed for a known reason, you can select the broken keys below to have them removed.<br/>
<keyname="striker_0140">Indicates when the last time the networks connected to this host were scanned. The scan is done to help find the IP addresses assigned to hosted servers and virtual machine equipment. The scan is a simple, sequential nmap ping scan in an attempt to be as non-invasive as possible. The frequency of these scans can be controlled by setting 'network-scan::scan-period' to a number of seconds (the current value is: [#!data!network-scan::scan-period!# seconds]).</key>
<keyname="striker_0142"><![CDATA[This step renames the real network interfaces, pairs them into redundant bonds and creates bridges for connecting to hosted servers.<br /><br />IPs and host names are optional, and can be set when assembling this host into an Anvil! system later.]]></key>
<keyname="striker_0143">If you would like to change the host name now, you can do so here. When adding this machine to an Anvil!, the host name will be set there as well making this optional.</key>
<keyname="striker_0144">This is the network gateway used to access the outside world. We'll match it to the appropriate network interface.</key>
<keyname="striker_0155">The network interface that connects to the default gateway.</key>
<keyname="striker_0156">This is the primary network interface. All things being equal, this is the interface that network traffic will travel over.</key>
<keyname="striker_0157">This is the secondary network interface. Network traffic will switch over to this interface if there is a problem detected with the primary interface.</key>
<keyname="striker_0158">If set, a bridge will be created on this network, allowing hosted servers to use this network.</key>
<keyname="striker_0159">This is the host name for the target system.</key>
<keyname="striker_0160">The network will use DHCP to attempt to get an IP address.</key>
<keyname="striker_0186">Indicates when the last time the OUI file was parsed. This is done to translate MAC addresses (and IPs associated with those MAC addresses) to the company that owns them.</key>
<keyname="striker_0202">This puts the host into network mapping mode. In this most, most functions are disabled and the link status of network interfaces are closely monitored.</key>
<keyname="striker_0208">Configure fence devices. These will be used when creating install manifests and are a critical safety mechanisms that will protect your data when a node misbehaves.</key>
<keyname="striker_0210">Fence devices are used to force a node that has entered an unknown state into a known state. Recovery after a node fault can not proceed until this happens, so this step is critically important.</key>
<keyname="striker_0211">Note: Any IPMI (iRMC, iLO, DRAC, etc) fence config will be handled in the host's config. This section configures shared devices, like PDUs. The ports/outlets a given node will use will be set in the install manifest later.</key>
<keyname="striker_0218">Note: Names and descriptions come from the fence agent itself. If you need more help, please run 'man #!variable!name!#' at the command line.</key>
<keyname="job_0002">The network configuration will be updated based on the variables stored in the database. Reconnecting to the machine using the new IP address may be required.</key>
<keyname="job_0020">Initialize a new Anvil! Node</key>
<keyname="job_0021">Initialize a new DR Host</key>
<keyname="job_0022">The target will be setup to talk to this and our peer dashboards. When initialization is complete, you will be able to map the target's network.</key>
<keyname="job_0023">Connecting to the target: [#!variable!target!#]...</key>
<keyname="job_0024">Connected!</key>
<keyname="job_0025">Unable to connect to: [#!variable!target!#]. Will keep trying for another: [#!variable!timeout!#] seconds...</key>
<keyname="job_0026">Unable to connect, the job has failed.</key>
<keyname="job_0029">Added the repository for this dashboard.</key>
<keyname="job_0030">Red Hat subscription information provides, attempting to register now.</key>
<keyname="job_0031">This machine is already registered with Red Hat. Skipping it.</key>
<keyname="job_0032">Unable to reach the Red Hat subscription service. Is the Internet working on this host?</key>
<keyname="job_0033">Please be patient, subscription can take a while to complete.</key>
<keyname="job_0034">Success!</key>
<keyname="job_0035">
Failure! The return code: [#!variable!return_code!#] was received ('0' was expected). Possibly helpful information:
* Output: [#!variable!output!#]
* Error: [#!variable!error!#]
</key>
<keyname="job_0036">Adding the repo: [#!variable!repo!#]</key>
<keyname="job_0037">Verifying the the needed repos are enabled now.</key>
<keyname="job_0038">[ Warning ] - The repo: [#!variable!repo!#] is not subcribed to this system! Initialization will continue, but it might fail.</key>
<keyname="job_0039">Updating the target's operating system prior to package install.</key>
<keyname="job_0040">[ Note ] - This step can take a while to finish, and there will be no input here until it completes.</key>
<keyname="job_0047">Finished! The target should be ready for initial configuration shortly. If it isn't, please check that the 'anvil-daemon' daemon is running.</key>
<keyname="job_0054">[ Error ] - The line number: [#!variable!line!#] in: [#!variable!file!#] does not appear to be for the target: [#!variable!target!#]. Has the file already been updated? Skipping it.</key>
<keyname="job_0057">The selected bad key(s) will be removed from the specified files.</key>
<keyname="job_0058">The state UUID: [#!variable!state_uuid!#] is for the machine with the host UUID: [#!variable!host_uuid!#], which is not us. This is probably a progrem error, skipping this.</key>
<keyname="job_0059">[ Error ] - There was a problem writing the file: [#!variable!file!#]. Details will be found in the logs.</key>
<keyname="job_0060">Success! The file: [#!variable!file!#] has been updated.</key>
<keyname="job_0061">Setting the host name to: [#!variable!host_name!#]...</key>
<keyname="job_0062">[ Error ] - The host name: [#!variable!host_name!#] is invalid. Skipping host name setup.</key>
<keyname="job_0063">[ Error ] - Something went wrong. The host name was set to: [#!variable!host_name!#], but the host name returned was: [#!variable!current_host_name!#].</key>
<keyname="job_0067">This job does a simple ping scan of the networks connected to this host. Any detected hosts have their MAC / IP addresses recorded. This is designed to help determine IP addresses assigned to servers hosted on the Anvil! system.</key>
<keyname="job_0071">The network configuration will be updated based on the variables stored in the database. When complete, the system will reboot.</key>
<keyname="warning_0001">[ Warning ] - The IP address will change. You will need to reconnect after applying these changes.</key>
<keyname="warning_0002">[ Warning ] - The access information appears to not be valid.</key>
<keyname="warning_0003">[ Warning ] - Test access to the peer (using SSH) failed. There may be details in the log file.</key>
<keyname="warning_0004">[ Warning ] - Accessing the peer over SSH worked, but a test connection to the database failed.</key>
<keyname="warning_0005">[ Warning ] - There was a problem reading the peer's UUID. Read: [#!variable!uuid!#], which appears to be invalid.</key>
<keyname="warning_0006">[ Warning ] - An SSH connection was established to: [#!variable!target!#], but we failed to establish a channel. The last error was: [#!variable!error!#].</key>
<keyname="warning_0007">[ Warning ] - The job: [#!variable!command!#] was picked up by: [#!variable!pid!#], but that process is not running and it appears to only be: [#!variable!percent!# %] complete. Restarting the job.</key>
<keyname="warning_0008">[ Warning ] - Unable to find a local IP on the same subnet as the IP/host: [#!variable!host!#] given for the target. Bi-directional setup not currently possible.</key>
<keyname="warning_0009">[ Warning ] - The subtask request for manipulating the 'Install Target' feature is not valid. It should be 'enabled' or 'disabled'</key><!-- NOTE: 'enabled' and 'disabled' are variable values, don't translate them. -->
<keyname="warning_0010">[ Warning ] - The IP address: [#!variable!ip_address!#] is not a valid IPv4 address</key>
<keyname="warning_0011">[ Warning ] - The SSH port is not a valid (usually it is 22, but it has to be between 1 ~ 65536)</key>
<keyname="warning_0012">[ Warning ] - Failed to log into the host. Is the IP or root user's password right?</key>
<keyname="warning_0013"><![CDATA[[ Warning ] - The target's host key has changed. If the target has been rebuilt, or the target IP reused, the old key will need to be removed. <a href="?striker=true&task=keys" target="_new">Click here</a> to resolve.]]></key>
<keyname="warning_0014">[ Warning ] - The host UUID: [#!variable!host_uuid!#] was not found in the #!data!path::json::all_status!# file on the local dashboard.</key>
<keyname="warning_0015">[ Warning ] - To configure a host as either an Anvil! node or a disaster recovery host, there must be at least 6 network interfaces. This machine only has: [#!variable!interface_count!#] interfaces.</key>
<keyname="warning_0016">[ Warning ] - No databases are available. Changes to the network interfaces will be cached.</key>
<keyname="warning_0017">[ Warning ] - The subnet mask is not valid</key>
<keyname="warning_0018">[ Warning ] - The IP address was specified, but the subnet mask was not</key>
<keyname="warning_0019">[ Warning ] - The passed in parameter '#!variable!parameter!#': [#!variable!ip_address!#] is not a valid IPv4 address.</key>
<keyname="warning_0020">[ Warning ] - The passed in parameter '#!variable!parameter!#': [#!variable!subnet_mask!#] is not a valid IPv4 subnet mask.</key>
<keyname="warning_0021">[ Warning ] - All three networks require the first network pair to be defined.</key>
<keyname="warning_0022">[ Warning ] - Only one network interface selected for a network pair.</key>
<keyname="warning_0023">[ Warning ] - The outgoing mail server appear to not be a valid domain name or IP address.</key>
<keyname="warning_0024">[ Warning ] - The outgoing mail server port is not valid. Must be 'mail_server:x' where x is 1 ~ 65535.</key>
<keyname="warning_0025">[ Warning ] - There was a problem saving the mail server data. Please check the logs for more information.</key>
<keyname="warning_0026">[ Warning ] - The recipient's email address appears to not be valid.</key>
<keyname="warning_0027">[ Warning ] - There was a problem saving the alert recipient data. Please check the logs for more information.</key>
<keyname="warning_0028">[ Warning ] - Failed to read the fence agent: [#!variable!agent!#] metadata. Ignoring it.</key>
<keyname="warning_0029">[ Warning ] - While resync'ing the table: [#!variable!table!#] on: [#!variable!host_name!# (#!variable!host_uuid!#)], there was an entry found in the public schema (#!variable!column!# = #!variable!uuid!#) but not in the history schema. This shouldn't happen, and it probably a bug. Switching the query's schema from public to history for the query: [#!variable!query!#] is being dropped.</key>
<keyname="warning_0030">[ Warning ] - Databse->insert_or_update_variables() was called with 'update_value_only' set, but the 'variable_uuid' wasn't passed or the 'variable_uuid' wasn't found given the 'variable_name'. Unable to update. Passed in values are logged below this message</key>
<keyname="warning_0031">[ Warning ] - No internet detected (couldn't ping: [#!variable!domain!#]). Skipping attempt to download RPMs.</key>
<keyname="error_0001">There are not enough network interfaces on this machine. You have: [#!variable!interface_count!#] interface(s), and you need at least: [#!variable!required_interfaces_for_single!#] interfaces to connect to the requested networks (one for Back-Channel and one for each Internet-Facing network).</key>
<keyname="error_0002">The local system UUID can't be read yet. This might be because the system is brand new and/or ScanCore hasn't run yet. Please try again in a minute.</key>
<keyname="error_0003">None of the databases are accessible, unable to proceed. Please be sure that 'anvil-daemon' is enabled and running on the database machine(s).</key>
<keyname="error_0009">Failed to add the target: [#!variable!target!#]:[#!variable!port!#]'s RSA fingerprint to: [#!variable!user!#]'s list of known hosts.</key>
<keyname="error_0010">There was a problem adding the local machine to the: [#!data!path::configs::anvil.conf!#] file. Please see the log for details.</key>
<keyname="error_0011">Something went wrong while trying to update the password. The return code was: [#!variable!return_code!#], but '0' was expected.</key>
<keyname="error_0012"><![CDATA[The <a href="https://en.wikipedia.org/wiki/Hostname" target="_new">host name</a> has to be set to a valid value.]]></key>
<keyname="error_0028"><![CDATA[There appears to be a problem with Striker. The login failed, please check: [<span class="code">#!data!path::log::main!#</span>] for details.]]></key>
<keyname="error_0029"><![CDATA[Failed to find the template: [<span class="code">#!variable!template!#</span>] in the template file: [<span class="code">#!variable!file!#</span>].]]></key>
<keyname="error_0030"><![CDATA[Failed to process the template: [<span class="code">#!variable!template!#</span>] in the template file: [<span class="code">#!variable!file!#</span>]. Details of the problem should be in: [<span class="code">#!data!path::log::main!#</span>].]]></key>
<keyname="error_0047">Failed to start the Install Target feature. Got a non-zero return code when starting: [#!data!sys::daemon::dhcpd!#] (got: [#!variable!rc!#]).</key>
<keyname="error_0048">Failed to stop the Install Target feature. Got a non-zero return code when starting: [#!data!sys::daemon::dhcpd!#] (got: [#!variable!rc!#]).</key>
<keyname="error_0049">A request to rename a file was made, but no file name was given.</key>
<keyname="error_0050">A request to rename the file: [#!variable!file!#] was made, but the new name wasn't given. Was '--to X' given?</key>
<keyname="error_0051">A request to rename the file: [#!variable!file!#] was made, but that file doesn't exist.</key>
<keyname="error_0052">A request to delete a file was made, but no file name was given.</key>
<keyname="error_0053">A request to delete the file: [#!variable!file!#] was received, but it is not under '/mnt/shared/'. This program can only work on or under that directory.</key>
<keyname="error_0056">A request to rename the file: [#!variable!file!#] to: [#!variable!to!#], but there is an existing file or directory with that name.</key>
<keyname="error_0058">Failed to backup: [#!variable!file!#], skipping.</key>
<keyname="error_0059">The file to be downloaded: [#!variable!file!#], already exists. Either remove it, or call again with '--overwrite'.</key>
<keyname="error_0060">Something went wrong moving the downloaded file from the temporary location: [#!variable!source_file!#] to the output: [#!variable!target_file!#]. Useful errors may be above this message.</key>
<keyname="error_0063">Something went wrong trying to download: [#!variable!packages!#]. The return code should have been '0'. but: [#!variable!return_code!#] was received. Is a package missing upstream?</key>
<keyname="error_0084">Unable to find a common network between the target and this machine. This shouldn't be possible, given we're able to talk to it. This is probably a program error.</key>
<keyname="error_0085">The URL: [#!variable!url!#] is not supported. The URL must start with 'http://', 'https://' or 'ftp://'.</key>
<keyname="error_0086">The requested URL: [#!variable!url!#] was not found on the remote server.</key>
<keyname="error_0087">The requested URL: [#!variable!url!#] does not resolve to a known domain.</key>
<keyname="error_0088">The requested URL: [#!variable!url!#] failed because the remote host refused the connection.</key>
<keyname="error_0089">The requested URL: [#!variable!url!#] failed because there is no route to that host.</key>
<keyname="error_0090">The requested URL: [#!variable!url!#] failed because the network is unreachable.</key>
<keyname="error_0094">Aborting the download of: [#!variable!url!#] to: [#!variable!save_to!#]. The target file already exists and 'overwrite' was not set.</key>
<keyname="error_0095">There was a problem downloading: [#!variable!url!#] to: [#!variable!file!#]. Aborting parsing of the OUI data.</key>
<keyname="error_0096">The 'oui_mac_prefix': [#!variable!oui_mac_prefix!#] string doesn't appear to be a valid 6-byte hex string.</key>
<keyname="error_0097"><![CDATA[The network range: [#!variable!range!#] does not appear to be valid. It must be '<ip>/<subnet>' (subnet can be dotted-decimal or CIDR notation) or be 'bcn', 'sn', 'ifn' or a specific variant like 'bcn1', 'sn2', or 'ifn2'. Alternatively, so not use '--network X' at all and all networks with host is connected to will be scanned.]]></key>
<keyname="error_0098">Failed to create the archive directory: [#!variable!directory!#]. Skipping the archive process.</key>
<keyname="error_0099">There was a problem writing out the records to file: [#!variable!file!#]. There may be more information in #!data!path::log::main!#. Skipping further attempts to archive: [#!variable!table!#].</key>
<keyname="error_0100">Compression appears to have failed. The return code '0' was expected from the bzip2 call, but: [#!variable!return_code!#] was returned. The output, if any, was: [#!variable!output!#].</key>
<keyname="error_0101">Compression appears to have failed. The output file: [#!variable!out_file!#] was not found.</key>
<keyname="error_0102">Failed to check the existence and size of the file: [#!variable!file!#] on the target: [#!variable!target!#] as: [#!variable!remote_user!#]. The error (if any) was: [#!variable!error!#] and the output (if any) was: [#!variable!output!#].</key>
<keyname="error_0104">The parameter get_company_from_oui->mac must be a valid MAC address or be in the format 'xx:xx:xx'. Received: [#!variable!mac!#].</key>
<keyname="error_0106"><![CDATA[The method Network->find_matches() was given the hash key: [#!variable!key!#], but it does not reference a hash. Are any IPs associated with this target?]]></key>
<keyname="error_0112"><![CDATA[Failed to read valid unified XML data from: [#!variable!file!#]. It should start with: [<?xml version="1.0" ?>]]]></key>
<keyname="error_0113">The unified metadata file: [#!data!path::data::fences_unified_metadata!#] was not found. There may have been a problem creating it.</key>
<keyname="error_0116">This is a CentOS machine, and tried to move the directory: [#!variable!source!#] to: [#!variable!target!#], but that renane failed.</key>
