- Remove this; (step 2) "This is the user name that you will log into Striker as and the name of the user that owns the database"
- Being set to the gateway, not the default DNS - "This is the domain name server(s) to use when resolving domain names. You can specify 2 or more, separated by commas."
- The web UI password isn't being set properly during Striker stage-2 setup
- Changing the password doesn't log out active webui sessions.
- How to write a NetworkManager dispatcher script to apply ethtool commands? - https://access.redhat.com/solutions/2841131
- Setup nodes to log to striker? - https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/networking_guide/sec-configuring_netconsole
- Pacemaker can be monitored via SNMP - https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/high_availability_add-on_reference/s1-snmpandpacemaker-HAAR
Changes made using tools such as nmcli do not require a reload but do require the associated interface to be put down and then up again. That can be done by using commands in the following format:
* nmcli dev disconnect interface-name
Followed by:
* nmcli con up interface-name
NOTE: RHEL doesn't support direct-cabled bonds - https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/networking_guide/ch-configure_network_bonding
ifcfg-X config Notes - /usr/share/doc/initscripts-*/sysconfig.txt (Look for the sections describing files /etc/sysconfig/network and /etc/sysconfig/network-scripts/ifcfg-<interface-name>);
* PREFIXx overrules NETMASKx. Use PREFIXx, not NETMASKx.
* The 'x' suffice for PREFIX, NETMASK, etc start at 0 and must count up by 1 at a time.
* ZONE will be useful for the firewall stuff later.
* ETHTOOL_OPTS is deprecated, replaced by using udev rules
* initscripts interpret PEERDNS=no to mean "never touch resolv.conf". NetworkManager interprets it to say "never add automatic (DHCP, PPP, VPN, etc.) nameservers to resolv.conf".
Bond
* resend_igmp & num_unsol_na={1~255} may help if a switch is slow to notice traffic has moved to the new interface. default is 1. Each update is send 200ms apart.
* Bridged interfaces should use BRIDGE_UUID="", _not_ BRIDGE="". The former causes the later to be ignored and the later is only used for possible compatibility reasons.
* resources can contain an US-ASCII character, except for spaces
* A resource is a single replication stream for 1 or more resources, max 65.535 vols per resource
* DRBD does, however, ship with an LVM integration facility that automates the creation of LVM snapshots immediately before synchronization. This ensures that a consistent copy of the data is always available on the peer, even while synchronization is running. See Using automated LVM snapshots during DRBD synchronization for details on using this facility.
* Checksum-based synchronization computes a block's hash on source and target and skips if matching, possibly making resync much faster for blocks rewritten with the same data, but at the cost of CPU. Make this a user-configurable option under the advanced tab.
* Suspended replication allows congested replication links to suspend replication, leaving the peer in a consistent state, but allowing the primary to "pull ahead". When the congestion passes, the delta resyncs. Make this a user-configurable option with scary warnings.
* Online verification can (should?) be run periodically on the server host (verification source will overwrite deltas on the verification target). Perhaps schedule to run once/month? Do resource sequentially as this places a CPU load on the nodes.
* Replication traffic integrity checking uses a given available kernel crypto to verify data integrity on transmission to the peer. If the replicated block can not be verified against the digest, the connection is dropped and immediately re-established; because of the bitmap the typical result is a retransmission.
** Make an option in the advanced tab. Test to see overhead this adds. Choose the lowest overhead algo (within reason)
* Support for disk flushes might be something we want to disable, as it seems to force write-through even with a function FBWC/BBU. Need to test.
* Note; "Inconsistent" is almost always useless. "Consistent" and "Outdated" are able to be used safely, just without whatever happened on the peer after.
* Truck based replication, also known as disk shipping, is a means of preseeding a remote site with data to be replicated, by physically shipping storage media to the remote site.
* Make sure that selinux doesn't block DRBD comms over the SN
* See "5.15.1. Growing on-line" for growing a DRBD resource
** Shrinking online is ONLY possible if the metadata is external. Worth creating *_md LVs? Offline requires backing up and restoring the MD
- I wonder if you'd have the same results if you could get vol1 into an UpToDate/UpToDate state using the drbdsetup equivalent of drbdadm new-current-uuid --clear-bitmap <res>
* A resource agent receives all configuration information about the resource it manages via environment variables. The names of these environment variables are always the name of the resource parameter, prefixed with OCF_RESKEY_. For example, if the resource has an ip parameter set to 192.168.1.1, then the resource agent will have access to an environment variable OCF_RESKEY_ip holding that value.
14:08 < lge> anyways, you can also "on-fail: retry"
OK, set the stop timeout to 60, set 'on-fail: block" and set the failure-timeout to 60 and see how pacemaker reacts.
failure-timeout
===
Migrate servers;
- Let ScanCore set 'node-health' attribute (http://clusterlabs.org/pacemaker/doc/en-US/Pacemaker/1.1/html-single/Pacemaker_Explained/index.html#s-node-health)
- Set 'migration-limit' to '1' to enforce serial live migration (http://clusterlabs.org/pacemaker/doc/en-US/Pacemaker/1.1/html-single/Pacemaker_Explained/index.html#s-cluster-options).
Migrate a single server by setting a location constraint against the node we want the VM off of.
- If anything goes wrong, the server will enter a blocked state in pacemaker.
- Recovery needs to be 'unmanage -> clean' to avoid a stop call.
11:57 <@kgaillot> for your design, that sounds right. between cleanup and manage, i'd make sure there was a PE run without any pending actions blocked by the unmanaging -- you can either look at the logs on the DC, run "crm_simulate -SL", or just check the status for a bit
11:58 <@kgaillot> you can play around with it by putting a higher preference on the to-be-cleaned node, to make sure it *does* move when you re-manage. that way you can see what logs/simulate/status look like
12:07 <@kgaillot> i'm thinking if you do crm_resource --reprobe instead of cleanup in the above sequence, that should prevent anything unexpected
12:07 <@kgaillot> unmanage -> adjust preferences if needed -> reprobe resource -> wait for probe results to come back in, and if status looks good -> re-manage
12:08 <@kgaillot> the reprobe will wipe the entire resource history and fail counts for the resource, causing pacemaker to recheck the current status on all nodes. if the status then shows the resource running where you expect/want it, with no errors, then it's not going to do anything further
12:09 <@kgaillot> (in 2.0, cleanup only erases the history where the resource has failed, while reprobe erases the history regardless)
12:13 <@kgaillot> if there are no failures in the resource history, there should be no risk of a full stop. if there is no resource history at all, then after reprobe, there should be no risk of any actions (assuming you've set up location preferences and stickiness how you want them)
Recover from a failed migration;
reset location to prefer current host -> unmanage resource -> cleanup resource -> manage resource
(running on node 2, so re-add location constraint - basically, make sure location constraint favours current host)
# Command section – Refer to Chapter 2 for a list of kickstart options. You must include the required options.
### NOTE: The %packages, %pre, %pre-install, %post, %onerror, and %traceback sections are all required to be closed with %end
# Section 2
# The %packages section – Refer to Chapter 3 for details.
# Section 3:
# The %pre, %pre-install, %post, %onerror, and %traceback sections – These sections can be in any order and are not required. Refer to Chapter 4, Chapter 5, and Chapter 6 for details.
====
0 root@pulsar:/var/lib/libvirt/images# dev_PATH=$(udevadm info /dev/sdb | grep -e ID_PATH=)
0 root@pulsar:/var/lib/libvirt/images# if [[ $dev_PATH == *"usb"* ]]; then echo "USB drive"; elif [[ $dev_PATH == *"nvme"* ]]; then echo "NVMe drive"; elif [[ $dev_PATH == *"ata"* ]]; then echo "SATA drive"; elif [[ $dev_PATH == *"scsi"* ]]; then echo "SCSI drive"; fi
USB drive
0 root@pulsar:/var/lib/libvirt/images# dev_PATH=$(udevadm info /dev/sda | grep -e ID_PATH=)
0 root@pulsar:/var/lib/libvirt/images# if [[ $dev_PATH == *"usb"* ]]; then echo "USB drive"; elif [[ $dev_PATH == *"nvme"* ]]; then echo "NVMe drive"; elif [[ $dev_PATH == *"ata"* ]]; then echo "SATA drive"; elif [[ $dev_PATH == *"scsi"* ]]; then echo "SCSI drive"; fi
SATA drive
0 root@pulsar:/var/lib/libvirt/images# dev_PATH=$(udevadm info /dev/nvme0n1 | grep -e ID_PATH=)
0 root@pulsar:/var/lib/libvirt/images# if [[ $dev_PATH == *"usb"* ]]; then echo "USB drive"; elif [[ $dev_PATH == *"nvme"* ]]; then echo "NVMe drive"; elif [[ $dev_PATH == *"ata"* ]]; then echo "SATA drive"; elif [[ $dev_PATH == *"scsi"* ]]; then echo "SCSI drive"; fi
NVMe drive
[root@localhost ~]# dev_PATH=$(udevadm info /dev/sda | grep -e ID_PATH=)
[root@localhost ~]# if [[ $dev_PATH == *"usb"* ]]; then echo "USB drive"; elif [[ $dev_PATH == *"nvme"* ]]; then echo "NVMe drive"; elif [[ $dev_PATH == *"ata"* ]]; then echo "SATA drive"; elif [[ $dev_PATH == *"scsi"* ]]; then echo "SCSI drive"; fi
OS10(conf-if-ma-1/1/1)# <165>1 2021-04-02T12:23:40.141901+00:00 OS10 dn_alm 652 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IP_ADDRESS_ADD: IP Address add is successful. IP 10.201.1.2/16 in VRF:default added successfully
OS10(conf-if-ma-1/1/1)# no shutdown
# Connected via SSH to confirm access:
OS10(config)#
<165>1 2021-04-02T12:25:49.956308+00:00 OS10 dn_alm 652 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %ALM_AUTH_EVENT: Authentication event was raised MESSAGE=pam_unix(sshd:session): session opened for user admin by (uid=0)
<86>1 2021-04-02T12:25:49.501860+00:00 OS10 sshd 6512 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) pam_unix(sshd:session): session opened for user admin by (uid=0)
<86>1 2021-04-02T12:25:51.795620+00:00 OS10 sshd 6527 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) pam_unix(sshd:session): session opened for user admin by (uid=0)
<165>1 2021-04-02T12:25:51.957630+00:00 OS10 dn_alm 652 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %ALM_AUTH_EVENT: Authentication event was raised MESSAGE=pam_unix(sshd:session): session opened for user admin by (uid=0)
<165>1 2021-04-02T12:31:11.702525+00:00 OS10 dn_alm 803 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_ASTATE_UP: Interface admin state up :port-channel1000
<165>1 2021-04-02T12:31:11.707501+00:00 OS10 dn_alm 803 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_OSTATE_DN: Interface operational state is down :port-channel1000
<165>1 2021-04-02T12:31:11.720332+00:00 OS10 dn_alm 803 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_OSTATE_UP: Interface operational state is up :port-channel1000
<165>1 2021-04-02T12:31:11.845070+00:00 OS10 dn_alm 803 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_OSTATE_UP: Interface operational state is up :vlan4094
<165>1 2021-04-02T12:31:11.863978+00:00 OS10 dn_alm 803 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %VLT_PEER_UP: VLT unit 1 is up
<165>1 2021-04-02T12:31:18.996716+00:00 OS10 dn_alm 803 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %VLT_ELECTION_ROLE: VLT unit 1 is elected as secondary
<165>1 2021-04-02T12:31:19.087695+00:00 OS10 dn_alm 803 - - Node.1-Unit.1:PRI [event], Dell EMC (OS10) %IFM_OSTATE_UP: Interface operational state is up :vlan1
Download the firmware from the Dell digital locker. Once downloaded, extracted and the sum verified, copy the 'PKGS_OS10-Enterprise-xxx-installer-x86_64.bin' file to one of the striker's /var/lib/tftpboot/' directory and start the dhcpd service.
### NOTE: Use the striker NOT connected to the switch being upgraded! If necessary, move the uplink interfaces off of the switch to be upgraded!
Once ready, connect to the switch over serial port.
### WARNING: The firmware update completely resets the switch! Backup you config before hand, if necessary. Also, watch for the loss of VLANs causing switch loops when 2+ uplinks are connected!
Installing OS10 on primary volume ... OK <- This takes a long time, be patient
Setting up shared data ... OK
Synchronizing standby image ...
OS10 installation is complete.
Creating ext4 filesystem on sda4 ... OK
Installing GRUB-UEFI ... OK
Saving system information ... OK
Saving ONIE support information ... OK
ONIE: NOS install successful: tftp://10.201.4.1/PKGS_OS10-Enterprise-10.5.2.3.316stretch-installer-x86_64.bin
ONIE: Rebooting...
ONIE:/ # discover: installer mode detected.
Stopping: discover...start-stop-daemon: warning: killing process 2881: No such process
done.
Stopping: dropbear ssh daemon... done.
Stopping: telnetd... done.
Stopping: syslogd... done.
Info: Unmounting kernel filesystems
umount: can't umount /: Invalid argument
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL tosd 4:0:0:0: [sda] Synchronizing SCSI cache
reboot: Restarting system
reboot: machine restart
### NOTE: The login prompt will appear before the system is ready to log in. The default username and password revert to 'admin' / 'admin', but this won't work for the first couple of minutes.
## OLD
zo-switch02# show version
Dell EMC Networking OS10 Enterprise
Copyright (c) 1999-2020 by Dell Inc. All Rights Reserved.
OS Version: 10.5.0.4
Build Version: 10.5.0.4.638
Build Time: 2020-01-30T21:08:56+0000
System Type: S4128T-ON
Architecture: x86_64
Up Time: 22:49:57
zo-switch02#
## New
zo-a01n01# show version
Dell EMC Networking OS10 Enterprise
Copyright (c) 1999-2021 by Dell Inc. All Rights Reserved.
# Hosts added or updated by the Anvil! on: [2021/04/17 16:24:52]:
10.201.10.2 Could not get property: Refusing activation, D-Bus is shutting down Could not get property: Refusing activation, D-Bus is shutting down. Could not get property: Refusing activation, D-Bus is shutting down.bcn1
192.168.122.12 Could not get property: Refusing activation, D-Bus is shutting down.ifn1
10.101.10.2 Could not get property: Refusing activation, D-Bus is shutting down.sn1
May 02 13:35:21 zo-a01n02.zennioptical.com setroubleshoot[5333]: SELinux is preventing /usr/sbin/drbdsetup from create access on the netlink_generic_socket labeled drbd_t. For complete SELinux messages run: sealert -l 4079c288-db4a-4f44-a588-94f1dbfff269
May 02 13:35:21 zo-a01n02.zennioptical.com setroubleshoot[5333]: SELinux is preventing /usr/sbin/drbdsetup from create access on the netlink_generic_socket labeled drbd_t.
If you believe that drbdsetup should be allowed create access on netlink_generic_socket labeled drbd_t by default.
