seasharp
/
anvil
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Local modifications to ClusterLabs/Anvil by Alteeve
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
292 Commits
2 Branches
0 Tags
21 MiB
 
 
 
 
 
 
Tag: Branch: Tree: d2c812ee03
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'd2c812ee03'
${ noResults }
anvil/notes

1195 lines
48 KiB
Raw Blame History

NEXT; -
RHEL 8 package changes:
chrony replaces ntp
cockpit replaces virt-manager (deprecated)
e1000e replaces e1000 driver
tmux replaces screen
iproute2 replaces bridge-utils (See "ip link" and man bridge.)
==] UEFI Setup [======================================================================
ignoredisk --only-use=vdb,vda
clearpart --none --initlabel
part raid.312 --fstype="mdmember" --ondisk=vda --size=19966
part raid.293 --fstype="mdmember" --ondisk=vdb --size=512
part raid.319 --fstype="mdmember" --ondisk=vdb --size=19966
part raid.286 --fstype="mdmember" --ondisk=vda --size=512
raid pv.326 --device=pv1 --fstype="lvmpv" --level=RAID1 raid.312 raid.319
raid /boot/efi --device=efi --fstype="efi" --level=RAID1 --fsoptions="umask=0077,shortname=winnt" --label=efi raid.286 raid.293
volgroup striker_vg0 --pesize=4096 pv.326
logvol swap --fstype="swap" --size=4096 --name=lv_swap --vgname=striker_vg0
logvol / --fstype="xfs" --size=15852 --label="lv_root" --name=lv_root --vgname=striker_vg0
======================================================================================
DOCS; -
- Explanation of 'comps.xml' (package grouping) - https://pagure.io/fedora-comps
- Firewalld
- https://www.digitalocean.com/community/tutorials/how-to-set-up-a-firewall-using-firewalld-on-centos-7
- PXE;
- https://docs.fedoraproject.org/en-US/fedora/f28/install-guide/advanced/Network_based_Installations/
- https://docs.fedoraproject.org/en-US/Fedora/26/html/Installation_Guide/chap-pxe-server-setup.html
- UEFI PXE notes - https://www.syslinux.org/wiki/index.php?title=PXELINUX#UEFI
- How to write a NetworkManager dispatcher script to apply ethtool commands? - https://access.redhat.com/solutions/2841131
- Setup nodes to log to striker? - https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/networking_guide/sec-configuring_netconsole
- Pacemaker can be monitored via SNMP - https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/high_availability_add-on_reference/s1-snmpandpacemaker-HAAR
- corosync.conf - https://access.redhat.com/articles/3185291
====
Network planning;
10.x.y.z / 255.255.0.0
10.x.y.z / 255.255.0.0
x = Network;
- BCN = 200 + network
ie: BCN1 = 10.201.y.z
BCN2 = 10.202.y.z
- SN = 100 + network
ie: SN1 = 10.101.y.z
SN2 = 10.102.y.z
y = Device Type.
Foudation Pack;
1. Switches
2. PDUs
3. UPSes
4. Switches
5. Strikers
6. Striker IPMI (BCN only)
Anvil! systems;
1st - 10 = Node IP
11 = Node IPMI
2nd - 12 = Node IP
13 = Node IPMI
3rd - 14 = Node IP
15 = Node IPMI
N...
z = Device Sequence
- Foundation pack devices are simple sequence
- Anvils; .1 = node 1, .2 = node 2, .3 = DR host
====
Ports we care about
Porto Number Used by Nets Description
TCP 2224 pcsd bcn It is crucial to open port 2224 in such a way that pcs from any node can talk to all nodes in the cluster, including itself.
UDP 5404 corosync bcn Required on corosync nodes if corosync is configured for multicast UDP
UDP 5405 corosync bcn Required on all corosync nodes (needed by corosync)
TCP 7788+ drbd sn 1 port per resource
TCP 49152-49215 virsh bcn live migration - migration_port_min and migration_port_max attributes in the /etc/libvirt/qemu.conf
NOTE: DHCP listens to raw sockets and ignores firewalld rules. We need to stop dhcpd directly - https://kb.isc.org/docs/aa-00378
* After all changes;
firewall-cmd --zone=public --add-port=49152-49215/tcp --permanent
firewall-cmd --reload
- Paths
If we want to create services or helpers later, look under - /usr/lib/firewalld/
Core firewalld configs, including defaults zones, etc - /etc/firewalld/
* Zones are meant to deal with dynamic environments and aren't that useful in mostly static server environments
* Use 'firewall-cmd' WITHOUT '--permanent' for things like enabling the VNC port for a server. Use '--permanent' for everything else.
====
Striker as PXE server
====
# Bootloader for BIOS
OS="fedora28"
mkdir /var/lib/tftpboot/
cp $(anvil source)/pxe/tftpboot/bios/* /var/lib/tftpboot/
chmod 755 /var/lib/tftpboot/*
# Bootloader for UEFI
cp $(anvil source)/pxe/tftpboot/uefi/* /var/lib/tftpboot/uefi/
chmod 755 /var/lib/tftpboot/uefi/*
# Copy kernel images for tftpboot downloads
mkdir -p /var/lib/tftpboot/${OS}
cp /lib/modules/$(uname -r)/vmlinuz /var/lib/tftpboot/${OS}/
mkinitrd /var/lib/tftpboot/${OS}/initrd.img $(uname -r)
# Configs from anvil source
rsync -av pxe/tftpboot/pxelinux.cfg/default root@f28-striker01:/var/lib/tftpboot/pxelinux.cfg/
rsync -av pxe/tftpboot/pxelinux/uefi root@f28-striker01:/var/lib/tftpboot/pxelinux/
==== UEFI boot crash
>>Start PXE over IPv4.
Station IP address is 10.1.14.186
Server IP address is 10.1.4.1
NBP filename is uefi/shim.efi
NBP filesize is 1210776 Bytes
Downloading NBP file...
NBP file downloaded successfully.
Fetching Netboot Image
!!!! X64 Exception Type - 0D(#GP - General Protection) CPU Apic ID - 00000000 !!!!
ExceptionData - 0000000000000000
RIP - 000000007FF8E976, CS - 0000000000000038, RFLAGS - 0000000000210202
RAX - 0000000000000001, RCX - 0000000000000010, RDX - AFAFAFAFAFAFAFA7
RBX - 0000000000000020, RSP - 000000007FF7E6B0, RBP - 000000007ED11F18
RSI - AFAFAFAFAFAFAFAF, RDI - 000000007FFA1720
R8 - 0000000000000000, R9 - 0000000000000028, R10 - 0000000000000020
R11 - 0000000000000002, R12 - 000000007ECE3798, R13 - 000000007ECE3C18
R14 - 000000007FF7E788, R15 - 000000007ECE37D8
DS - 0000000000000030, ES - 0000000000000030, FS - 0000000000000030
GS - 0000000000000030, SS - 0000000000000030
CR0 - 0000000080010033, CR2 - 0000000000000000, CR3 - 000000007FC01000
CR4 - 0000000000000668, CR8 - 0000000000000000
DR0 - 0000000000000000, DR1 - 0000000000000000, DR2 - 0000000000000000
DR3 - 0000000000000000, DR6 - 00000000FFFF0FF0, DR7 - 0000000000000400
GDTR - 000000007FBEE698 0000000000000047, LDTR - 0000000000000000
IDTR - 000000007F5B5018 0000000000000FFF, TR - 0000000000000000
FXSAVE_STATE - 000000007FF7E310
!!!! Find image based on IP(0x7FF8E976) /builddir/build/BUILD/tianocore-edk2-cb5f4f45ce/Build/OvmfX64/DEBUG_GCC5/X64/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll (ImageBase=000000007FF80000, EntryPoint=000000007FF98DB1) !!!!
====
DB stuff;
Dump;
su - postgres -c "pg_dump anvil" > /anvil.out
Drop;
su - postgres -c "dropdb anvil" && su - postgres -c "createdb --owner admin anvil" && su - postgres -c "psql anvil"
Reload the DB;
su - postgres -c "dropdb anvil" && su - postgres -c "createdb --owner admin anvil" && su - postgres -c "psql anvil < /anvil.out"
su - postgres -c "psql anvil"
Changes made using tools such as nmcli do not require a reload but do require the associated interface to be put down and then up again. That can be done by using commands in the following format:
* nmcli dev disconnect interface-name
Followed by:
* nmcli con up interface-name
NOTE: RHEL doesn't support direct-cabled bonds - https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/networking_guide/ch-configure_network_bonding
ifcfg-X config Notes - /usr/share/doc/initscripts-*/sysconfig.txt (Look for the sections describing files /etc/sysconfig/network and /etc/sysconfig/network-scripts/ifcfg-<interface-name>);
- man 5 nm-settings-ifcfg-rh
- https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/networking_guide/sec-Using_Channel_Bonding#s3-modules-bonding-directives
- /usr/share/doc/kernel-doc-*/Documentation/networking/bonding.txt
iface
* PREFIXx overrules NETMASKx. Use PREFIXx, not NETMASKx.
* The 'x' suffice for PREFIX, NETMASK, etc start at 0 and must count up by 1 at a time.
* ZONE will be useful for the firewall stuff later.
* ETHTOOL_OPTS is deprecated, replaced by using udev rules
* initscripts interpret PEERDNS=no to mean "never touch resolv.conf". NetworkManager interprets it to say "never add automatic (DHCP, PPP, VPN, etc.) nameservers to resolv.conf".
Bond
* resend_igmp & num_unsol_na={1~255} may help if a switch is slow to notice traffic has moved to the new interface. default is 1. Each update is send 200ms apart.
* Bridged interfaces should use BRIDGE_UUID="", _not_ BRIDGE="". The former causes the later to be ignored and the later is only used for possible compatibility reasons.
Bridge
* STP=no is default, we'll test 'yes'.
* DOMAIN="<client_domain>"
# Network Setup
hostnamectl set-hostname m3-a02n01.alteeve.com --static
hostnamectl set-hostname --pretty "Alteeve's Niche! - Anvil! 02, Node 01"
hostname m3-a02n01.alteeve.com
ssh-keygen -t rsa -N "" -b 8191 -f ~/.ssh/id_rsa
hosts:
====
10.1.20.1 m3-a02n01.bcn m3-a02n01 m3-a02n01.alteeve.com
10.41.20.1 m3-a02n01.sn
10.255.20.1 m3-a02n01.ifn
10.1.20.2 m3-a02n02.bcn m3-a02n02 m3-a02n02.alteeve.com
10.41.20.2 m3-a02n02.sn
10.255.20.2 m3-a02n02.ifn
10.1.20.3 m3-a02dr01.bcn m3-a02dr01 m3-a02dr01.alteeve.com
10.41.20.3 m3-a02dr01.sn
10.255.20.3 m3-a02dr01.ifn
====
Example Link config:
====
====
Example Bonding config:
====
BRIDGE_UUID="e7a8f977-560d-4a94-95cd-a1218f0fe890"
DEVICE="ifn1_bond1"
NAME="IFN 1 - Bond 1"
UUID="a59d138e-6c40-4366-b859-fcadafe577f4"
BONDING_OPTS="mode=active-backup primary=ifn1_link1 updelay=120000 downdelay=0 miimon=100 primary_reselect=better"
TYPE="Bond"
BONDING_MASTER="yes"
BOOTPROTO="none"
IPV6INIT="no"
ONBOOT="yes"
DEFROUTE="no"
BRIDGE="ifn1_bridge1"
ZONE=public
====
Example Bridge config:
=====
=====
=======
virt-manager stores information in dconf-editor -> /org/virt-manager/virt-manager/connections ($HOME/.config/dconf/user)
==== dconf read /org/virt-manager/virt-manager/connections/uris
['qemu+ssh://root@localhost/system', 'qemu+ssh://root@wp-a01n02.remote/system', 'qemu+ssh://root@an-nas02.kw01.alteeve.ca/system', 'qemu+ssh://root@hb-a01n01.remote/system', 'qemu+ssh://root@hb-a01n02.remote/system', 'qemu:///system']
==== dconf read /org/virt-manager/virt-manager/connections/autoconnect
['qemu+ssh://root@localhost/system']
====
### Setup - Striker
# el8 build dependencies
dnf install ...
# Build for el8
drbd*
fence-agents-all
htop
perl-HTML-FromText
perl-HTML-Strip
perl-Log-Journald
perl-Net-Netmask
perl-Net-SSH2
perl-Proc-Simple
perl-UUID-Tiny
screen
# Packages
depends on: perl-XML-Simple postgresql-server postgresql-plperl postgresql-contrib perl-CGI perl-NetAddr-IP perl-DBD-Pg rsync perl-Log-Journald perl-Net-SSH2
# Paths
mkdir /usr/sbin/anvil
# virsh
virsh net-destroy default
virsh net-autostart default --disable
virsh net-undefine default
# Web - TODO: Setup to auto-use "Let's Encrypt", but make sure we have an offline fall-back
systemctl enable httpd.service
systemctl start httpd.service
# Post install
systemctl daemon-reload
# SELinux
restorecon -rv /var/www
=============================================================
[root@striker-m3 ~]# cat watch_logs
clear; journalctl -f -a -S "$(date +"%F %R:%S")" -t anvil
### Setup - Nodes
# OS Install
* Set TZ to etc/GMT
* Disable kdump
* Storage;
** 1 = /BIOS Boot (1 MiB)
** 2 = /boot (1 GiB)
** 3 = LVM PV (all remaining space)
*** VG = <short-name>_vg0
**** <swap> (8 GiB)
**** / (50 GiB)
**** /mnt/anvil (20 GiB)
* 'root' and 'admin' use 'Initial1' (with sudo)
# OS config
* Register if RHEL proper;
subscription-manager register --username <user> --password <secret> --auto-attach --force
subscription-manager repos --enable=rhel-ha-for-rhel-7-server-rpms
subscription-manager repos --enable=rhel-7-server-optional-rpms
* Packages to install;
*** DASHBOARDS
rpm -Uvh https://www.alteeve.com/an-repo/el7/alteeve-el7-repo-0.1-1.noarch.rpm
yum install perl-CGI perl-DBD-Pg perl-DBI perl-Log-Journald perl-Net-SSH2 perl-NetAddr-IP perl-XML-Simple postgresql-contrib postgresql-plperl postgresql-server rsync
*** NODES
rpm -Uvh https://www.alteeve.com/an-repo/el7/alteeve-el7-repo-0.1-1.noarch.rpm
yum install bash-completion bind-utils bridge-utils drbd drbd-bash-completion drbd-kernel drbd-utils fence-agents-all fence-agents-virsh gpm kernel-doc kmod-drbd libvirt libvirt-daemon libvirt-daemon-driver-qemu libvirt-daemon-kvm libvirt-docs mlocate pacemaker pcs perl-Data-Dumper perl-JSON perl-XML-Simple qemu-kvm qemu-kvm-common qemu-kvm-tools rsync screen vim virt-install
* Packages to remove;
yum remove biosdevname
* Service management;
systemctl start gpm.service
* Network;
** {bc,if,s}nX_{link,bond,bridge}Y naming
** firewall; - https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/high_availability_add-on_reference/s1-firewalls-haar
firewall-cmd --permanent --add-service=high-availability
firewall-cmd --add-service=high-availability
firewall-cmd --reload
* Cluster Config;
==== Both nodes
echo Initial1 | passwd hacluster --stdin
systemctl start pcsd.service
systemctl enable pcsd.service
systemctl disable libvirtd.service
systemctl stop libvirtd.service
==== One node
pcs cluster auth m3-a01n01 m3-a01n02
# Username: hacluster
# Password:
pcs cluster setup --name m3-anvil-01 m3-a01n01 m3-a01n02
pcs cluster start --all
pcs stonith create virsh_node1 fence_virsh pcmk_host_list="m3-a01n01" ipaddr="192.168.122.1" passwd="secret" login="root" delay="15" port="m3-a01n01" op monitor interval="60"
pcs stonith create virsh_node2 fence_virsh pcmk_host_list="m3-a01n02" ipaddr="192.168.122.1" passwd="secret" login="root" port="m3-a01n02" op monitor interval="60"
pcs resource create hypervisor systemd:libvirtd op monitor interval=60
pcs resource clone hypervisor clone-max=2 notify="false"
pcs resource create drbd systemd:drbd op monitor interval=60
pcs resource clone drbd clone-max=2 notify="false"
stonith_admin --fence m3-a01n02 --verbose; crm_error $?
==== DRBD notes
* resources can contain an US-ASCII character, except for spaces
* A resource is a single replication stream for 1 or more resources, max 65.535 vols per resource
* DRBD does, however, ship with an LVM integration facility that automates the creation of LVM snapshots immediately before synchronization. This ensures that a consistent copy of the data is always available on the peer, even while synchronization is running. See Using automated LVM snapshots during DRBD synchronization for details on using this facility.
** https://docs.linbit.com/docs/users-guide-9.0/#s-lvm-snapshots
* Checksum-based synchronization computes a block's hash on source and target and skips if matching, possibly making resync much faster for blocks rewritten with the same data, but at the cost of CPU. Make this a user-configurable option under the advanced tab.
* Suspended replication allows congested replication links to suspend replication, leaving the peer in a consistent state, but allowing the primary to "pull ahead". When the congestion passes, the delta resyncs. Make this a user-configurable option with scary warnings.
* Online verification can (should?) be run periodically on the server host (verification source will overwrite deltas on the verification target). Perhaps schedule to run once/month? Do resource sequentially as this places a CPU load on the nodes.
* Replication traffic integrity checking uses a given available kernel crypto to verify data integrity on transmission to the peer. If the replicated block can not be verified against the digest, the connection is dropped and immediately re-established; because of the bitmap the typical result is a retransmission.
** Make an option in the advanced tab. Test to see overhead this adds. Choose the lowest overhead algo (within reason)
* Support for disk flushes might be something we want to disable, as it seems to force write-through even with a function FBWC/BBU. Need to test.
* Note; "Inconsistent" is almost always useless. "Consistent" and "Outdated" are able to be used safely, just without whatever happened on the peer after.
* Truck based replication, also known as disk shipping, is a means of preseeding a remote site with data to be replicated, by physically shipping storage media to the remote site.
* Make sure that selinux doesn't block DRBD comms over the SN
* See "5.15.1. Growing on-line" for growing a DRBD resource
** Shrinking online is ONLY possible if the metadata is external. Worth creating *_md LVs? Offline requires backing up and restoring the MD
Provisioning a server will need to:
* Open up a DRBD port (or more, if multiple resources are created).
* Create the DRBD resource(s); Find the lowest free rX.res, create it locally and on the peer (if up),
firewall-cmd --zone=public --permanent --add-port=7788-7790/tcp
firewall-cmd --reload
* Provision the server via virt-install
* push the new XML to striker such that the peer's anvil daemon picks it up and writes it out.
[root@m3-a01n01 drbd.d]# drbdsetup status r0 --verbose --statistics
r0 node-id:1 role:Primary suspended:no
write-ordering:flush
volume:0 minor:0 disk:UpToDate quorum:yes
size:10485404 read:9682852 written:0 al-writes:0 bm-writes:0 upper-pending:0 lower-pending:0 al-suspended:no blocked:no
m3-a01n02.alteeve.com node-id:0 connection:Connected role:Secondary congested:no
volume:0 replication:SyncSource peer-disk:Inconsistent done:92.29 resync-suspended:no
received:0 sent:9679140 out-of-sync:808144 pending:6 unacked:3
[root@m3-a01n02 ~]# cat /sys/kernel/debug/drbd/resources/r0/connections/m3-a01n01.alteeve.com/0/proc_drbd
0: cs:SyncSource ro:Primary/Secondary ds:UpToDate/Inconsistent C r-----
ns:24360 nr:10485404 dw:10485404 dr:25420 al:0 bm:0 lo:0 pe:[0;0] ua:0 ap:[0;0] ep:1 wo:2 oos:10461044
[>....................] sync'ed: 0.3% (10212/10236)M
finish: 0:50:01 speed: 3,480 (5,020 -- 3,480) K/sec
99% sector pos: 20970808/20970808
resync: used:0/61 hits:557 misses:2 starving:0 locked:0 changed:1
act_log: used:0/1237 hits:0 misses:0 starving:0 locked:0 changed:0
blocked on activity log: 0
[root@m3-a01n02 ~]# drbdadm primary r0
r0: State change failed: (-1) Multiple primaries not allowed by config
Command 'drbdsetup primary r0' terminated with exit code 11
[root@m3-a01n02 ~]# drbdadm net-options --allow-two-primaries=yes r0
[root@m3-a01n02 ~]# drbdadm net-options --allow-two-primaries=no r0
drbdsetup show all
drbdsetup show all --show-defaults
== virt-install stuff
* Get a list of --os-variants: 'osinfo-query os'
* virt-install --print-xml (or --transient)
* Migate;
# For all resources under the server;
#drbdadm net-options r0 --allow-two-primaries=yes
drbdsetup net-options srv01-c7_0 2 --_name=m3-a02n01.alteeve.com --csums-alg=md5 --data-integrity-alg=md5 --after-sb-0pri=discard-zero-changes --after-sb-1pri=discard-secondary --after-sb-2pri=disconnect --protocol=C --fencing=resource-and-stonith --allow-two-primaries=yes
drbdsetup net-options srv01-c7_0 2 --_name=m3-a02n01.alteeve.com --csums-alg=md5 --data-integrity-alg=md5 --after-sb-0pri=discard-zero-changes --after-sb-1pri=discard-secondary --after-sb-2pri=disconnect --protocol=C --fencing=resource-and-stonith --allow-two-primaries=yes
# Migrate:
virsh -c qemu+ssh://root@m3-a02n02.alteeve.com/system list
virsh migrate --unsafe --undefinesource --live srv01-c7 qemu+ssh://m3-a02n01.alteeve.com/system
virsh -c qemu+ssh://root@m3-a02n02.alteeve.com/system migrate --undefinesource --live srv01-c7 qemu+ssh://m3-a02n01.alteeve.com/system
# Again for all resource under the server;
drbdadm net-options r0 --allow-two-primaries=no
drbdsetup net-options <resource> <target_node_id> --_name=<target_node_name> --allow-two-primaries=yes
virsh migrate --undefinesource --live <server> qemu+ssh://<target_node>/system
drbdsetup net-options <resource> <target_node_id> --_name=<target_node_name> --allow-two-primaries=no
pcs constraint list --full
Location Constraints:
Resource: srv01-c7
Enabled on: m3-a02n02.alteeve.com (score:50) (id:location-srv01-c7-m3-a02n02.alteeve.com-50)
pcs constraint remove location-srv01-c7-m3-a02n02.alteeve.com-50
Set to 90% of BCN bandwidth
migrate-setspeed domain bandwidth
Set the maximum migration bandwidth (in MiB/s) for a domain which is being migrated to another host. bandwidth is interpreted as an
unsigned long long value. Specifying a negative value results in an essentially unlimited value being provided to the hypervisor. The
hypervisor can choose whether to reject the value or convert it to the maximum value allowed.
migrate-getspeed domain
Get the maximum migration bandwidth (in MiB/s) for a domain.
==== /etc/drbd.d/global_common.conf
# DRBD is the result of over a decade of development by LINBIT.
# In case you need professional services for DRBD or have
# feature requests visit http://www.linbit.com
global {
usage-count yes;
# Decide what kind of udev symlinks you want for "implicit" volumes
# (those without explicit volume <vnr> {} block, implied vnr=0):
# /dev/drbd/by-resource/<resource>/<vnr> (explicit volumes)
# /dev/drbd/by-resource/<resource> (default for implict)
udev-always-use-vnr; # treat implicit the same as explicit volumes
# minor-count dialog-refresh disable-ip-verification
# cmd-timeout-short 5; cmd-timeout-medium 121; cmd-timeout-long 600;
}
common {
handlers {
# These are EXAMPLE handlers only.
# They may have severe implications,
# like hard resetting the node under certain circumstances.
# Be careful when choosing your poison.
# pri-on-incon-degr "/usr/lib/drbd/notify-pri-on-incon-degr.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot -f";
# pri-lost-after-sb "/usr/lib/drbd/notify-pri-lost-after-sb.sh; /usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot -f";
# local-io-error "/usr/lib/drbd/notify-io-error.sh; /usr/lib/drbd/notify-emergency-shutdown.sh; echo o > /proc/sysrq-trigger ; halt -f";
# fence-peer "/usr/lib/drbd/crm-fence-peer.sh";
# split-brain "/usr/lib/drbd/notify-split-brain.sh root";
# out-of-sync "/usr/lib/drbd/notify-out-of-sync.sh root";
# before-resync-target "/usr/lib/drbd/snapshot-resync-target-lvm.sh -p 15 -- -c 16k";
# after-resync-target /usr/lib/drbd/unsnapshot-resync-target-lvm.sh;
# quorum-lost "/usr/lib/drbd/notify-quorum-lost.sh root";
fence-peer "/usr/sbin/fence_pacemaker";
}
startup {
# wfc-timeout degr-wfc-timeout outdated-wfc-timeout wait-after-sb
}
options {
# cpu-mask on-no-data-accessible
# RECOMMENDED for three or more storage nodes with DRBD 9:
# quorum majority;
# on-no-quorum suspend-io | io-error;
auto-promote yes;
}
disk {
# size on-io-error fencing disk-barrier disk-flushes
# disk-drain md-flushes resync-rate resync-after al-extents
# c-plan-ahead c-delay-target c-fill-target c-max-rate
# c-min-rate disk-timeout
disk-flushes no;
md-flushes no;
}
net {
# protocol timeout max-epoch-size max-buffers
# connect-int ping-int sndbuf-size rcvbuf-size ko-count
# allow-two-primaries cram-hmac-alg shared-secret after-sb-0pri
# after-sb-1pri after-sb-2pri always-asbp rr-conflict
# ping-timeout data-integrity-alg tcp-cork on-congestion
# congestion-fill congestion-extents csums-alg verify-alg
# use-rle
# This computes an md5 sum of the block before replicating/synchronizing and skips if it matches already.
# This can help with increasing replication/sync speed in some cases, but at the cost of CPU time. We may
# disable this (or make it user-changable).
csums-alg md5;
# Use md5 sums to verify replicated data. More CPU overhead, but safer.
data-integrity-alg md5;
# We'll override this just before a migration as needed.
allow-two-primaries no;
# Traditional split-brain handling.
after-sb-0pri discard-zero-changes;
after-sb-1pri discard-secondary;
after-sb-2pri disconnect;
}
}
====
==== cat /etc/drbd.d/srv01-c7_0.res
# Server srv01-c7 Disk 0
resource srv01-c7_0 {
device /dev/drbd0;
meta-disk internal;
on m3-a02n01.alteeve.com {
node-id 0;
disk /dev/node01_vg0/srv01-c7;
}
on m3-a02n02.alteeve.com {
node-id 1;
disk /dev/node02_vg0/srv01-c7;
}
on m3-a02dr01.alteeve.com {
node-id 2;
disk /dev/dr01_vg0/srv01-c7;
}
connection {
host m3-a02n01.alteeve.com address 10.41.20.1:7788;
host m3-a02n02.alteeve.com address 10.41.20.2:7788;
net {
protocol C;
fencing resource-and-stonith;
}
}
connection {
host m3-a02n01.alteeve.com address 10.41.20.1:7789;
host m3-a02dr01.alteeve.com address 10.41.20.3:7789;
net {
protocol A;
fencing dont-care;
}
}
connection {
host m3-a02n02.alteeve.com address 10.41.20.2:7790;
host m3-a02dr01.alteeve.com address 10.41.20.3:7790;
net {
protocol A;
fencing dont-care;
}
}
}
====
# Provision servers
mkdir /mnt/anvil/{provision,files,archive,definitions}
pcs resource create srv01-c7 ocf:alteeve:server hypervisor="qemu:///system" config="/mnt/anvil/definitions/srv01-c7.xml" meta allow-migrate="true" op monitor interval="10" op stop timeout="60" on-fail="block" meta allow-migrate="true" failure-timeout="75"
pcs resource create srv01-c7 ocf:alteeve:server hypervisor="qemu:///system" config="/mnt/anvil/definitions/srv01-c7.xml" meta allow-migrate="true" op monitor interval="10" op on-fail="block" meta allow-migrate="true" failure-timeout="75"
pcs resource create srv01-c7 ocf:alteeve:server name="srv01-c7" meta allow-migrate="true" op monitor interval="10" op stop on-fail="block" meta allow-migrate="true" failure-timeout="75"
pcs resource create srv01-c7 ocf:alteeve:server name="srv01-c7" meta allow-migrate="true" op monitor interval="60" op stop on-fail="block" op migrate_to on-fail="block" op migrate_from on-fail="block" meta allow-migrate="true" failure-timeout="75"
== Resource Agent; https://github.com/ClusterLabs/resource-agents/blob/master/doc/dev-guides/ra-dev-guide.asc
* A resource agent receives all configuration information about the resource it manages via environment variables. The names of these environment variables are always the name of the resource parameter, prefixed with OCF_RESKEY_. For example, if the resource has an ip parameter set to 192.168.1.1, then the resource agent will have access to an environment variable OCF_RESKEY_ip holding that value.
===
When stopping a server;
14:03 < lge> "on-fail: block"
14:03 < lge> is per operation type.
14:08 < lge> anyways, you can also "on-fail: retry"
OK, set the stop timeout to 60, set 'on-fail: block" and set the failure-timeout to 60 and see how pacemaker reacts.
failure-timeout
===
Migrate servers;
- Let ScanCore set 'node-health' attribute (http://clusterlabs.org/pacemaker/doc/en-US/Pacemaker/1.1/html-single/Pacemaker_Explained/index.html#s-node-health)
- Set 'migration-limit' to '1' to enforce serial live migration (http://clusterlabs.org/pacemaker/doc/en-US/Pacemaker/1.1/html-single/Pacemaker_Explained/index.html#s-cluster-options).
Migrate a single server by setting a location constraint against the node we want the VM off of.
- If anything goes wrong, the server will enter a blocked state in pacemaker.
- Recovery needs to be 'unmanage -> clean' to avoid a stop call.
11:57 <@kgaillot> for your design, that sounds right. between cleanup and manage, i'd make sure there was a PE run without any pending actions blocked by the unmanaging -- you can either look at the logs on the DC, run "crm_simulate -SL", or just check the status for a bit
11:58 <@kgaillot> you can play around with it by putting a higher preference on the to-be-cleaned node, to make sure it *does* move when you re-manage. that way you can see what logs/simulate/status look like
12:07 <@kgaillot> i'm thinking if you do crm_resource --reprobe instead of cleanup in the above sequence, that should prevent anything unexpected
12:07 <@kgaillot> unmanage -> adjust preferences if needed -> reprobe resource -> wait for probe results to come back in, and if status looks good -> re-manage
12:08 <@kgaillot> the reprobe will wipe the entire resource history and fail counts for the resource, causing pacemaker to recheck the current status on all nodes. if the status then shows the resource running where you expect/want it, with no errors, then it's not going to do anything further
12:09 <@kgaillot> (in 2.0, cleanup only erases the history where the resource has failed, while reprobe erases the history regardless)
12:13 <@kgaillot> if there are no failures in the resource history, there should be no risk of a full stop. if there is no resource history at all, then after reprobe, there should be no risk of any actions (assuming you've set up location preferences and stickiness how you want them)
Recover from a failed migration;
reset location to prefer current host -> unmanage resource -> cleanup resource -> manage resource
(running on node 2, so re-add location constraint - basically, make sure location constraint favours current host)
pcs resource unmanage srv01-c7
pcs constraint remove location-srv01-c7-m3-a02n02.alteeve.com-50
crm_resource --reprobe
pcs resource manage srv01-c7
https://pykickstart.readthedocs.io/en/latest/kickstart-docs.html#chapter-1-introduction
==== Sample kickstart for Fedora28 netinstall
#version=DEVEL
ignoredisk --only-use=vda
# Partition clearing information
clearpart --none --initlabel
# Use graphical install
graphical
# Use network installation
url --url="http://10.1.4.1/fedora28/x86_64/iso/"
# Keyboard layouts
keyboard --vckeymap=us --xlayouts='us'
# System language
lang en_CA.UTF-8
# Network information
network --bootproto=dhcp --device=ens3 --ipv6=auto --activate
network --hostname=localhost.localdomain
# Root password
rootpw --iscrypted $6$fyAht.3wBVlRGgqG$5dqIv2NrBD87uA51fxuoic/t2G93pXPUjVlh27Avg20ZGY409SK8cMVgABswF.krJSVIyoHfIChXNfpP/qTjI1
# Run the Setup Agent on first boot
firstboot --enable
# Do not configure the X Window System
skipx
# System services
services --enabled="chronyd"
# System timezone
timezone Etc/GMT --isUtc
# System bootloader configuration
bootloader --location=mbr --boot-drive=vda
%packages
@^server-product-environment
%end
%addon com_redhat_kdump --disable --reserve-mb='128'
%end
%anaconda
pwpolicy root --minlen=6 --minquality=1 --notstrict --nochanges --notempty
pwpolicy user --minlen=6 --minquality=1 --notstrict --nochanges --emptyok
pwpolicy luks --minlen=6 --minquality=1 --notstrict --nochanges --notempty
%end
====
==== M3 Striker Kickstart
# Setion 1
# Command section – Refer to Chapter 2 for a list of kickstart options. You must include the required options.
### NOTE: The %packages, %pre, %pre-install, %post, %onerror, and %traceback sections are all required to be closed with %end
# Section 2
# The %packages section – Refer to Chapter 3 for details.
# Section 3:
# The %pre, %pre-install, %post, %onerror, and %traceback sections – These sections can be in any order and are not required. Refer to Chapter 4, Chapter 5, and Chapter 6 for details.
====
0 root@pulsar:/var/lib/libvirt/images# dev_PATH=$(udevadm info /dev/sdb | grep -e ID_PATH=)
0 root@pulsar:/var/lib/libvirt/images# if [[ $dev_PATH == *"usb"* ]]; then echo "USB drive"; elif [[ $dev_PATH == *"nvme"* ]]; then echo "NVMe drive"; elif [[ $dev_PATH == *"ata"* ]]; then echo "SATA drive"; elif [[ $dev_PATH == *"scsi"* ]]; then echo "SCSI drive"; fi
USB drive
0 root@pulsar:/var/lib/libvirt/images# dev_PATH=$(udevadm info /dev/sda | grep -e ID_PATH=)
0 root@pulsar:/var/lib/libvirt/images# if [[ $dev_PATH == *"usb"* ]]; then echo "USB drive"; elif [[ $dev_PATH == *"nvme"* ]]; then echo "NVMe drive"; elif [[ $dev_PATH == *"ata"* ]]; then echo "SATA drive"; elif [[ $dev_PATH == *"scsi"* ]]; then echo "SCSI drive"; fi
SATA drive
0 root@pulsar:/var/lib/libvirt/images# dev_PATH=$(udevadm info /dev/nvme0n1 | grep -e ID_PATH=)
0 root@pulsar:/var/lib/libvirt/images# if [[ $dev_PATH == *"usb"* ]]; then echo "USB drive"; elif [[ $dev_PATH == *"nvme"* ]]; then echo "NVMe drive"; elif [[ $dev_PATH == *"ata"* ]]; then echo "SATA drive"; elif [[ $dev_PATH == *"scsi"* ]]; then echo "SCSI drive"; fi
NVMe drive
[root@localhost ~]# dev_PATH=$(udevadm info /dev/sda | grep -e ID_PATH=)
[root@localhost ~]# if [[ $dev_PATH == *"usb"* ]]; then echo "USB drive"; elif [[ $dev_PATH == *"nvme"* ]]; then echo "NVMe drive"; elif [[ $dev_PATH == *"ata"* ]]; then echo "SATA drive"; elif [[ $dev_PATH == *"scsi"* ]]; then echo "SCSI drive"; fi
SCSI drive
0 root@pulsar:/var/lib/libvirt/images# cat /sys/class/block/sdb/device/model
Flash Disk
0 root@pulsar:/var/lib/libvirt/images# cat /sys/class/block/sda/device/model
SanDisk SDSSDXPS
0 root@pulsar:/var/lib/libvirt/images# cat /sys/class/block/nvme0n1/device/model
INTEL SSDPEKKW512G7
### Stuff only NVMe has
1 root@pulsar:/var/lib/libvirt/images# cat /sys/class/block/nvme0n1/device/subsysnqn
nqn.2014.08.org.nvmexpress:80868086BTPY63650FPG512F INTEL SSDPEKKW512G7
0 root@pulsar:/var/lib/libvirt/images# cat /sys/class/block/sda/device/subsysnqn
cat: /sys/class/block/sda/device/subsysnqn: No such file or directory
1 root@pulsar:/var/lib/libvirt/images# cat /sys/class/block/sdb/device/subsysnqn
cat: /sys/class/block/sdb/device/subsysnqn: No such file or directory
0 root@pulsar:/var/lib/libvirt/images# cat /sys/class/block/nvme0n1/device/serial
BTPY63650FPG512F
0 root@pulsar:/var/lib/libvirt/images# cat /sys/class/block/sda/device/serial
cat: /sys/class/block/sda/device/serial: No such file or directory
1 root@pulsar:/var/lib/libvirt/images# cat /sys/class/block/sdb/device/serial
cat: /sys/class/block/sdb/device/serial: No such file or directory
1 root@pulsar:/var/lib/libvirt/images# cat /sys/class/block/nvme0n1/device/transport
pcie
0 root@pulsar:/var/lib/libvirt/images# cat /sys/class/block/sda/device/transport
cat: /sys/class/block/sda/device/transport: No such file or directory
1 root@pulsar:/var/lib/libvirt/images# cat /sys/class/block/sdb/device/transport
cat: /sys/class/block/sdb/device/transport: No such file or directory
Disk size:
/sys/class/block/sda/size * <block size>
=====
man pages
1 Executable programs or shell commands
5 File formats and conventions eg /etc/passwd
7 Miscellaneous (including macro packages and conventions), e.g. man(7), groff(7)
8 System administration commands (usually only for root)
A manual page consists of several sections.
Conventional section names include NAME, SYNOPSIS, CONFIGURATION, DESCRIPTION, OPTIONS, EXIT STATUS, RETURN VALUE, ERRORS, ENVIRONMENT, FILES, VERSIONS, CONFORMING TO, NOTES, BUGS, EXAMPLE, AUTHORS, and SEE ALSO.
The following conventions apply to the SYNOPSIS section and can be used as a guide in other sections.
bold text type exactly as shown.
italic text replace with appropriate argument.
[-abc] any or all arguments within [ ] are optional.
-a|-b options delimited by | cannot be used together.
argument ... argument is repeatable.
[expression] ... entire expression within [ ] is repeatable.
====
BEGIN TRANSACTION;
DROP FUNCTION history_alerts() CASCADE;
DROP TABLE history.alerts;
DROP TABLE alerts;
CREATE TABLE alerts (
alert_uuid uuid not null primary key,
alert_host_uuid uuid not null, -- The name of the node or dashboard that this alert came from.
alert_set_by text not null,
alert_level integer not null, -- 1 (critical), 2 (warning), 3 (notice) or 4 (info)
alert_title text not null, -- ScanCore will read in the agents <name>.xml words file and look for this message key
alert_message text not null, -- ScanCore will read in the agents <name>.xml words file and look for this message key
alert_sort_position integer not null default 9999, -- The alerts will sort on this column. It allows for an optional sorting of the messages in the alert.
alert_show_header integer not null default 1, -- This can be set to have the alert be printed with only the contents of the string, no headers.
modified_date timestamp with time zone not null,
FOREIGN KEY(alert_host_uuid) REFERENCES hosts(host_uuid)
);
ALTER TABLE alerts OWNER TO admin;
CREATE TABLE history.alerts (
history_id bigserial,
alert_uuid uuid,
alert_host_uuid uuid,
alert_set_by text,
alert_level integer,
alert_title text,
alert_message text,
alert_sort_position integer,
alert_show_header integer,
modified_date timestamp with time zone not null
);
ALTER TABLE history.alerts OWNER TO admin;
CREATE FUNCTION history_alerts() RETURNS trigger
AS $$
DECLARE
history_alerts RECORD;
BEGIN
SELECT INTO history_alerts * FROM alerts WHERE alert_uuid = new.alert_uuid;
INSERT INTO history.alerts
(alert_uuid,
alert_host_uuid,
alert_set_by,
alert_level,
alert_title,
alert_title_variables,
alert_message,
alert_message_variables,
alert_sort_position,
alert_show_header,
modified_date)
VALUES
(history_alerts.alert_uuid,
history_alerts.alert_host_uuid,
history_alerts.alert_set_by,
history_alerts.alert_level,
history_alerts.alert_title,
history_alerts.alert_message,
history_alerts.alert_sort_position,
history_alerts.alert_show_header,
history_alerts.modified_date);
RETURN NULL;
END;
$$
LANGUAGE plpgsql;
ALTER FUNCTION history_alerts() OWNER TO admin;
CREATE TRIGGER trigger_alerts
AFTER INSERT OR UPDATE ON alerts
FOR EACH ROW EXECUTE PROCEDURE history_alerts();
COMMIT;
====
3rd party stuff;
dnf install autoconf automake bzip2-devel corosynclib-devel gnutls-devel help2man libqb-devel libtool \
libtool-ltdl-devel libuuid-devel libxml2-devel libxslt-devel pam-devel "pkgconfig(dbus-1)" \
"pkgconfig(glib-2.0)" python3-devel asciidoc inkscape publican booth-site diffstat \
fence-agents-apc fence-agents-ipmilan fence-agents-scsi fence-virt python3-lxml ruby-devel \
rubygem-backports rubygem-ethon rubygem-ffi rubygem-multi_json rubygem-open4 rubygem-rack \
rubygem-rack-protection rubygem-rack-test rubygem-sinatra rubygem-test-unit flex perl-generators
----
pacemaker;
git tag
git checkout <2.x>
make srpm
mv /home/digimer/anvil/builds/pacemaker/pacemaker-2.0.0-0.1.rc2.fedora.src.rpm ~/rpmbuild/SRPMS/
----
pcs;
- Requires pacemaker 2.x install
git tag
git checkout <0.10.x>
====
Building 3rd party tools
dnf -y install bzip2-devel corosynclib-devel docbook-style-xsl gnutls-devel help2man libqb-devel libtool libtool-ltdl-devel libuuid-devel libxml2-devel libxslt-devel ncurses-devel pam-devel
==========
Build Dependency chain;
perl-Log-Log4perl
perl-Log-Dispatch-FileRotate
perl-MIME-Lite
==========
RPM build order
--- Install from RHEL repos;
- Groups;
dnf group install development rpm-development-tools
- Packages
dnf install bash-completion bind-utils dnf-utils firefox gdm libgcrypt-devel libutempter-devel libvirt-bash-completion ncurses-devel openssl-devel pam-devel perl-Capture-Tiny perl-Devel-CheckLib perl-Digest-SHA1 perl-ExtUtils-CBuilder perl-ExtUtils-MakeMaker perl-HTML-Parser \
perl-IO-stringy perl-MailTools perl-Module-Build perl-Module-Install perl-Module-Install-AutoLicense perl-Module-Install-ReadmeFromPod perl-Net-DNS perl-Test-Exception perl-Test-Simple perl-Test-Pod perl-Test-Pod-Coverage \
perl-Test2-Suite rpm-build systemd-devel texinfo virt-manager wget \
perl-Params-ValidationCompiler perl-Dist-CheckConflicts perl-namespace-autoclean perl-Test-Fatal perl-Devel-GlobalDestruction perl-IPC-Run3 perl-Specio perl-Sys-Syslog mod_perl postfix perl-DBI perl-IPC-SysV perl-Test perl-Filter rrdtool-perl perl-Test-Warn perl-Date-Manip \
perl-MIME-Types python36 docbook-style-xsl libxslt flex kernel-devel
- Uninstall
dnf remove biosdevname
--- First round of builds;
* anvil
* anvil-striker-extra
* libssh2 # NOTE! Make sure this comes from F29 (1.8.0-8). The version from RHEL doesn't offer -devel, they say it's deprecated (??). May need to update or replace perl-Net-SSH2
* perl-Email-Date-Format
* perl-Exporter-Lite
* perl-HTML-Strip
* perl-IO-CaptureOutput
* perl-Log-Journald
* perl-Mail-Sender
* perl-Mail-Sendmail
* perl-Module-Install-GithubMeta
* perl-Net-Domain-TLD
* perl-Proc-Simple
* perl-Test-Needs
* perl-Test-UseAllModules
* perl-UUID-Tiny
* screen
--- Second round of builds;
rpm -Uvh libssh2 (won't update from 1.8.0-7 from RHEL8 repo to our 1.8.0-8 via dnf update for some reason)
dnf install perl-IO-CaptureOutput perl-Exporter-Lite perl-Module-Install-GithubMeta perl-Net-Domain-TLD perl-Test-UseAllModules perl-Mail-Sender perl-Mail-Sendmail perl-Test-Needs perl-Email-Date-Format
* perl-Email-Valid
* perl-MIME-Lite
* perl-Module-Install-AutoLicense
* perl-Net-Netmask
--- Third round of builds;
dnf install perl-Email-Valid erl-Module-Install-AutoLicense perl-MIME-Lite
* perl-Email-Find
* perl-Log-Dispatch
* perl-Module-Install-CheckLib
--- Fourth round of builds;
dnf install perl-Email-Find perl-Module-Install-CheckLib perl-Log-Dispatch
* perl-HTML-FromText
* perl-Log-Dispatch-FileRotate
* perl-Net-SSH2
--- Fifth round of builds;
dnf install perl-Log-Dispatch
* perl-Log-Log4perl
====== try1
1. dnf install asciidoc bind-utils bison byacc cmake dos2unix freeglut-devel freetype-devel gcc-c++ gd-devel gettext-devel ghostscript graphviz gtk2-devel inkscape libGLU-devel libX11-devel libXext-devel libXi-devel libXmu-devel \
libXt-devel libgcrypt-devel libjpeg-devel libpng-devel librsvg2-devel libtiff-devel libtool libtool-ltdl-devel libwebp-devel libxml2-devel lpr mesa-libGL-devel openssl-devel perl "perl(Devel::PPPort)" "perl(Env)" \
"perl(ExtUtils::CBuilder)" "perl(File::HomeDir)" perl-File-Remove "perl(File::ShareDir)" "perl(File::Which)" "perl(Locale::Messages)" "perl(Mail::Address)" "perl(Module::Build)" "perl(Module::Pluggable)" \
"perl(Module::Runtime)" "perl(Net::DNS)" "perl(Term::ReadKey)" "perl(Test)" "perl(Test::Simple)" "perl(Text::Diff)" "perl(Try::Tiny)" "perl(YAML)" "perl(autodie)" perl-Devel-Peek perl-Pod-Parser perl-Text-Glob \
perl-generators "pkgconfig(dbus-1)" "pkgconfig(glib-2.0)" publican python3-devel python3-devel python36 qt5-qtbase-devel systemd-devel texlive-epstopdf "tex(adjustbox.sty)" "tex(appendix.sty)" "tex(dvips)" \
"tex(import.sty)" "tex(latex)" "tex(multirow.sty)" "tex(sectsty.sty)" "tex(tabu.sty)" "tex(tocloft.sty)" "tex(xtab.sty)" time valgrind wget xdg-user-dirs xdg-utils xmlto xz-devel zip2-devel zlib-devel
=================
* csnappy
* doxygen
* fpaste
* giflib
* gtest
* help2man
* htop
* jbigkit
* lcms2
* libssh2
* libutempter
* libwmf
* perl-Capture-Tiny
* perl-Class-XSAccessor
* perl-Config-Tiny
* perl-Class-Data-Inheritable
* perl-Class-Tiny
* perl-Devel-CheckBin
* perl-Devel-Hide
* perl-Devel-StackTrace
* perl-Digest-SHA1
* perl-Encode
* perl-ExtUtils-Depends
* perl-Exporter-Lite
* perl-ExtUtils-Config
* perl-ExtUtils-Helpers
* perl-ExtUtils-PkgConfig
* perl-File-BaseDir
* perl-File-ReadBackwards
* perl-File-Remove
* perl-File-Type
* perl-Import-Into
* perl-Importer
* perl-IO-CaptureOutput
* perl-IO-String
* perl-IO-stringy
* perl-Log-Journald
* perl-Mock-Config
* perl-Module-Install-ExtraTests
* perl-Module-Pluggable
* perl-Net-Domain-TLD
* perl-Number-Compare
* perl-PadWalker
* perl-Perl-Destruct-Level
* perl-Probe-Perl
* perl-Proc-Simple
* perl-Scope-Guard
* perl-File-ShareDir-Install
* perl-Lingua-EN-Inflect
* perl-strictures
* perl-String-Format
* perl-Sub-Exporter-Progressive
* perl-Sub-Identify
* perl-Sub-Uplevel
* perl-Taint-Runtime
* perl-Task-Weaken
* perl-Term-Size-Perl
* perl-Test-Deep
* perl-Test-Fatal
* perl-Test-InDistDir
* perl-Test-Object
* perl-Test-Pod
* perl-Test-Requires
* perl-Test-Warnings
* perl-Test-Without-Module
* perl-YAML-LibYAML
* perl-YAML-Syck
* perltidy
* yasm
2. dnf install csnappy doxygen fpaste giflib gtest help2man htop jbigkit lcms2 libssh2 libutempter libwmf perl-Capture-Tiny perl-Class-XSAccessor perl-Config-Tiny perl-Class-Data-Inheritable perl-Class-Tiny perl-Devel-CheckBin \
perl-Devel-Hide perl-Devel-StackTrace perl-Digest-SHA1 perl-Encode perl-ExtUtils-Depends perl-Exporter-Lite perl-ExtUtils-Config perl-ExtUtils-Helpers perl-ExtUtils-PkgConfig perl-File-BaseDir perl-File-ReadBackwards \
perl-File-Remove perl-File-Type perl-Import-Into perl-Importer perl-IO-CaptureOutput perl-IO-String perl-IO-stringy perl-Log-Journald perl-Mock-Config perl-Module-Install-ExtraTests perl-Module-Pluggable \
perl-Net-Domain-TLD perl-Number-Compare perl-PadWalker perl-Perl-Destruct-Level perl-Probe-Perl perl-Proc-Simple perl-Scope-Guard perl-File-ShareDir-Install perl-Lingua-EN-Inflect perl-strictures perl-String-Format \
perl-Sub-Exporter-Progressive perl-Sub-Identify perl-Sub-Uplevel perl-Taint-Runtime perl-Task-Weaken perl-Term-Size-Perl perl-Test-Deep perl-Test-Fatal perl-Test-InDistDir perl-Test-Object perl-Test-Pod \
perl-Test-Requires perl-Test-Warnings perl-Test-Without-Module perl-YAML-LibYAML perl-YAML-Syck perltidy yasm
jasper
libdatrie
libthai
libtiff
* p7zip
perl-B-Hooks-EndOfScope
perl-B-Keywords
perl-Class-Method-Modifiers
perl-Clone
perl-Devel-CheckLib
perl-Devel-Cycle
perl-Devel-EnforceEncapsulation
perl-Devel-GlobalDestruction
perl-Devel-Symdump
perl-Dist-CheckConflicts
perl-Email-Find
perl-Email-Valid
perl-Encode-EUCJPASCII
perl-Exception-Class
perl-Exporter-Tiny
perl-ExtUtils-InstallPaths
perl-File-DesktopEntry
perl-File-Find-Rule
perl-File-Find-Rule-Perl
perl-File-MimeInfo
perl-Font-TTF
perl-GD
perl-Getopt-ArgvFile
perl-Graphics-TIFF
perl-Hook-LexWrap
perl-HTML-FromText
perl-HTML-Strip
perl-IO-All
perl-List-MoreUtils
perl-List-MoreUtils-XS
perl-MCE
perl-MIME-Charset
perl-Module-Build-Tiny
perl-Module-Implementation
perl-Module-Install
perl-Module-Install-AuthorRequires
perl-Module-Install-AuthorTests
perl-Module-Install-AutoLicense
perl-Module-Install-CheckLib
perl-Module-Install-GithubMeta
perl-Module-Install-ManifestSkip
perl-Module-Install-ReadmeFromPod
perl-Module-Install-Repository
perl-Module-Package
perl-Module-Package-Au
perl-Moo
perl-namespace-autoclean
perl-namespace-clean
perl-Net-Netmask
perl-Net-SSH2
perl-Package-Stash
perl-Package-Stash-XS
perl-Paper-Specs
perl-Path-Class
perl-Path-Tiny
perl-PDF-API2
perl-Perl-Critic
perl-Perl-Critic-Deprecated
perl-Perl-Critic-More
perl-Perl-MinimumVersion
perl-pod2pdf
perl-Pod-Coverage
perl-Pod-Markdown
perl-Pod-Spell
perl-PPI
perl-PPIx-QuoteLike
perl-PPIx-Regexp
perl-PPIx-Utilities
perl-Readonly
perl-Role-Tiny
perl-Sereal
perl-Sereal-Decoder
perl-Sereal-Encoder
perl-Sub-Info
perl-Sub-Name
perl-Sub-Quote
perl-Term-Size-Any
perl-Term-Table
perl-Test-Differences
perl-Test-Exception
perl-Test-LongString
perl-Test-Memory-Cycle
perl-Test-Perl-Critic
perl-Test-Pod-Coverage
perl-Test-Script
perl-Test-SubCalls
perl-Test-UseAllModules
perl-Test-Warn
perl-Test2-Suite - Needs to be updated! Source from F29 isn't available easily
perl-Unicode-EastAsianWidth
perl-Unicode-LineBreak
perl-Unicode-UTF8
perl-UUID-Tiny
perl-Variable-Magic
perl-YAML-Tiny
screen
texinfo
zstd
3.
GraphicsMagick
miniz
perl-Image-Size
sombok
=======================================
cd SOURCES;
tar -xzvf $tarball (or xjvf, whatever);
tar -xzv -C package-digimer -f $tarball;
patch in *-digimer;
diff -uNr $package $package-digimer > ../SOURCES/whatever.patch
00:24 < Bahhumbug>
Burst the source tarball;
do it again but stash this copy in a *-digimer directory.
Do patching in the -digimer directory and when finished great a recursive unified diff and place the results directly in the named .patch file.
cd ~/rpmbuild/SOURCES
tar -xzvf htop-2.2.0.tar.gz
mv htop-2.2.0 htop-2.2.0-digimer
cd htop-2.2.0-digimer
# patch
diff -uNr htop-2.2.0 htop-2.2.0-digimer > whatever.patch
# Fabio's way
diff -Naurd htop-2.2.0 htop-2.2.0-digimer > htop_python3_MakeHeader.patch