seasharp
/
anvil
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Local modifications to ClusterLabs/Anvil by Alteeve
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1828 Commits
2 Branches
0 Tags
21 MiB
 
 
 
 
 
 
Tag: Branch: Tree: 8c60aaaf5f
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '8c60aaaf5f'
${ noResults }
anvil/scancore-agents/scan-apc-pdu/scan-apc-pdu

2733 lines
144 KiB
Raw Blame History

#!/usr/bin/perl
#
# This uses data in the 'fences' database table (any agent starting with 'fence_apc_*' to get a list of APC-
# brand PDUs to scan.
#
# Examples;
#
# Exit codes;
# 0 - Success
# 1 - Something went wrong, agent aborted run.
#
# 255 - The host's UUID isn't in the hosts table yet, ScanCore itself hasn't been run.
#
# Use my modules.
use strict;
use warnings;
use Anvil::Tools;
use Data::Dumper;
use Socket;
no warnings 'recursion';
=cut
OIDs of interest;
State data
.1.3.6.1.4.1.318.1.1.4.1.5.0 = Serial Number <- Global ID
.1.3.6.1.4.1.318.1.1.4.1.4.0 = Model Number
.1.3.6.1.4.1.318.1.1.4.1.3.0 = Date of manufacture (mm/dd/yyyy, if 'yy' year 2000 = '00')
.1.3.6.1.4.1.318.1.1.4.1.2.0 = Firmware version
.1.3.6.1.4.1.318.1.1.4.1.1.0 = Hardware version (never changes)
Variables
.1.3.6.1.2.1.1.3.0 = Uptime (in timeticks, 900 = 9 seconds)
.1.3.6.1.4.1.318.1.1.12.1.16.0 = Wattage draw (seems to be for the full device, not per phase)
# Phase info
.1.3.6.1.4.1.318.1.1.12.2.1.1.0 = Max Amperage out per phase
.1.3.6.1.4.1.318.1.1.12.2.1.2.0 = Number of phases on the PDU
.1.3.6.1.4.1.318.1.1.12.2.2.1.1.2.1 = Low amp threshold. (0 = Disabled; No alarm on low power. Any digit is the minimum amperage under which we throw an alert) (NOTE: last digit is phase number, so .1 == phase 1)
.1.3.6.1.4.1.318.1.1.12.2.2.1.1.3.1 = High amperage warning threshold. If the power draw exceeds this, throw a warning alert, warn on equal or greater
.1.3.6.1.4.1.318.1.1.12.2.2.1.1.4.1 = High amperage critical threshold. If the power draw exceeds this, throw a critical alert (breaker is about to pop), warn on equal or greater (NOTE: Default == max amp per phase, we should set it lower, Max - 2?)
.1.3.6.1.4.1.318.1.1.12.2.3.1.1.2.1 = Current Amperage on the phase, in 1/10 Amp (x10 to get Amp)
Port information
.1.3.6.1.4.1.318.1.1.4.4.1.0 = Number of outlets (ie: 8)
.1.3.6.1.4.1.318.1.1.4.4.2.1.2.n = Pending action on state? (1 = command pending, 2 = no command pending, 3 = unknown. If all ports are '3', power cycle is required. If the all devices on the peer report Power is OK, do so immediately)
.1.3.6.1.4.1.318.1.1.4.4.2.1.3.n = Current state (read: 1 = on, 2 = off, 4 = unknown --- write: 1 = turn on, 2 = turn off, 3 = cycle (~5s), 5 = on after 'sPDUOutletPowerOnTime' delay, 6 = off after sPDUOutletPowerOffTime delay, 7 = off after sPDUOutletPowerOffTime delay, wait sPDUOutletRebootDuration time, then back on.)
.1.3.6.1.4.1.318.1.1.4.5.2.1.3.n = Outlet name (default is 'Outlet N'), Can be read or set, max 20 chars. <- Set this when we map the Anvil!
.1.3.6.1.4.1.318.1.1.4.5.2.1.2.n = Power on delay (in seconds), default is '0' seconds. (-1 = stay off, 0 = on with PDU, X = number of seconds to wait before powering on)
.1.3.6.1.4.1.318.1.1.4.5.2.1.4.n = Power off delay (in seconds) (-1 = stay on, 0 = off with PDU, X = number of seconds to wait before powering off)
.1.3.6.1.4.1.318.1.1.4.5.2.1.5.n = Reboot delay (sleep time), default is '5' seconds.
.1.3.6.1.4.1.318.1.1.12.3.5.1.1.3.n = Phase that this outlet is in
Network data (NOTE: .1 is the loopback interface, .2 is the physical interface)
.1.3.6.1.2.1.2.2.1.4.2 = MTU size
.1.3.6.1.2.1.2.2.1.5.2 = Link speed (in bps)
.1.3.6.1.2.1.2.2.1.6.2 = MAC address - This is losing the first nibble... It returns type STRING instead of Hex-STRING, even if -Ox is used. If I point to the APC MIB, it returns OK. This is what we should be using.
.1.3.6.1.6.3.10.2.1.1.0 = MAC address (with some prefix) in hex. Not sure if this is supported on other PDUs though...
=cut
# Disable buffering
$| = 1;
# Prevent a discrepency between UID/GID and EUID/EGID from throwing an error.
$< = $>;
$( = $);
my $THIS_FILE = ($0 =~ /^.*\/(.*)$/)[0];
my $running_directory = ($0 =~ /^(.*?)\/$THIS_FILE$/)[0];
if (($running_directory =~ /^\./) && ($ENV{PWD}))
{
$running_directory =~ s/^\./$ENV{PWD}/;
}
my $anvil = Anvil::Tools->new();
# Make sure we're running as 'root'
# $< == real UID, $> == effective UID
if (($< != 0) && ($> != 0))
{
# Not root
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, 'print' => 1, key => "error_0005"});
$anvil->nice_exit({exit_code => 1});
}
$anvil->data->{'scan-apc-pdu'} = {
# Starts at '2' so that anything set to '1' manually shows first
alert_sort => 2,
disable => 0,
# Ticks are genera lly in 10ms increments
ticks_per_second => 100,
# By default, the critical amperage is the same as the max amperage. If that is the
# case here, we will subtract this number of amps from the max and use that as our
# critical warning threshold. So if the max threshold is 12, and the critical
# threshold is also 11 or 12, we will drop it to 10. If the critical is set below 10,
# we won't adjust it at all.
critical_amps_below_max => 2,
# This drops the warning to be at least this number of amps below critical's level.
warning_amps_below_critical => 2,
# A warning or critical alert has to be this number of amps above/below the threshold
# for the alert to be cleared.
clear_alert_threshold => 2,
# This is needed to trick/force the 'scan_apc_pdu_mac_address' OID into returning a Hex-STRING.
striker_mib => "/usr/sbin/scancore-agents/".$THIS_FILE."/Striker-MIB.txt",
};
$anvil->data->{oids} = {
scan_apc_pdu => {
scan_apc_pdu_serial_number => ".1.3.6.1.4.1.318.1.1.4.1.5.0",
scan_apc_pdu_model_number => ".1.3.6.1.4.1.318.1.1.4.1.4.0",
scan_apc_pdu_manufacture_date => ".1.3.6.1.4.1.318.1.1.4.1.3.0",
scan_apc_pdu_firmware_version => ".1.3.6.1.4.1.318.1.1.4.1.2.0",
scan_apc_pdu_hardware_version => ".1.3.6.1.4.1.318.1.1.4.1.1.0",
scan_apc_pdu_mac_address => ".1.3.6.1.2.1.2.2.1.6.2",
scan_apc_pdu_mac_address_alt => ".1.3.6.1.2.1.2.2.1.6.1", # Some PDUs use this
scan_apc_pdu_mtu_size => ".1.3.6.1.2.1.2.2.1.4.2",
scan_apc_pdu_mtu_size_alt => ".1.3.6.1.2.1.2.2.1.4.1", # Some PDUs use this
scan_apc_pdu_link_speed => ".1.3.6.1.2.1.2.2.1.5.2",
scan_apc_pdu_link_speed_alt => ".1.3.6.1.2.1.2.2.1.5.1",
scan_apc_pdu_phase_count => ".1.3.6.1.4.1.318.1.1.12.2.1.2.0",
scan_apc_pdu_outlet_count => ".1.3.6.1.4.1.318.1.1.4.4.1.0",
},
scan_apc_pdu_phases => {
# The phase number will be appended to the OID
scan_apc_pdu_phase_current_amperage => ".1.3.6.1.4.1.318.1.1.12.2.3.1.1.2.",
scan_apc_pdu_phase_max_amperage => ".1.3.6.1.4.1.318.1.1.12.2.1.1.0",
### NOTE: These aren't recorded, but they are used for alert triggers.
phase_low_amp_warning => ".1.3.6.1.4.1.318.1.1.12.2.2.1.1.2.1",
# We'll drop these to be at least 2 Amps below max.
phase_high_amp_warning => ".1.3.6.1.4.1.318.1.1.12.2.2.1.1.3.1",
# If this is less than 'scan-apc-pdu::critical_amps_below_max' below max, it
# will be automatically dropped.
phase_high_amp_critical => ".1.3.6.1.4.1.318.1.1.12.2.2.1.1.4.1",
},
scan_apc_pdu_outlets => {
### The outlet number will be appended to all of these OIDs.
scan_apc_pdu_outlet_name => ".1.3.6.1.4.1.318.1.1.4.5.2.1.3.",
scan_apc_pdu_outlet_on_phase => ".1.3.6.1.4.1.318.1.1.12.3.5.1.1.3.",
# read: 1 = on, 2 = off, 4 = unknown
# write: 1 = on, 2 = off, 3 = cycle
scan_apc_pdu_outlet_state => ".1.3.6.1.4.1.318.1.1.4.4.2.1.3.",
},
scan_apc_pdu_variables => {
# This is in ticks, so divide the value by 'scan-apc-pdu::ticks_per_second'
uptime => ".1.3.6.1.2.1.1.3.0",
total_wattage_draw => ".1.3.6.1.4.1.318.1.1.12.1.16.0",
},
};
$anvil->data->{snmp} = {
community => {
version => "2c",
'read' => "public",
'write' => "private",
},
};
$anvil->Storage->read_config();
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 2, key => "log_0115", variables => { program => $THIS_FILE }});
# Read switches
$anvil->Get->switches;
# Too many connections cause the UPS to lag out, so we only run on Strikers.
my $host_type = $anvil->Get->host_type();
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { host_type => $host_type }});
if (($host_type ne "striker") && (not $anvil->data->{switches}{force}))
{
$anvil->nice_exit({exit_code => 1});
}
# Handle start-up tasks
my $problem = $anvil->ScanCore->agent_startup({agent => $THIS_FILE});
if ($problem)
{
$anvil->nice_exit({exit_code => 1});
}
if ($anvil->data->{switches}{purge})
{
# This can be called when doing bulk-database purges.
my $schema_file = $anvil->data->{path}{directories}{scan_agents}."/".$THIS_FILE."/".$THIS_FILE.".sql";
$anvil->Database->purge_data({
debug => 2,
tables => $anvil->Database->get_tables_from_schema({schema_file => $schema_file}),
});
$anvil->nice_exit({exit_code => 0});
}
# Find the PDUs. The number of PDUs found is returned. If 0, we exit
if (not find_pdus($anvil))
{
# No PDUs found.
$anvil->Log->entry({log_level => 1, message_key => "scan_apc_pdu_message_0001", file => $THIS_FILE, line => __LINE__});
$anvil->nice_exit({exit_code => 1});
}
# Read the last state of any PDUs we already know about
read_last_scan($anvil);
# Collect data from PDUs.
gather_pdu_data($anvil);
# Look for changes.
find_changes($anvil);
# Shut down.
$anvil->ScanCore->agent_shutdown({agent => $THIS_FILE});
#############################################################################################################
# Functions #
#############################################################################################################
# This reads in the last scan's data.
sub read_last_scan
{
my ($anvil) = @_;
# Read in existing data, if any.
my $query = "
SELECT
scan_apc_pdu_uuid,
scan_apc_pdu_fence_uuid,
scan_apc_pdu_serial_number,
scan_apc_pdu_model_number,
scan_apc_pdu_manufacture_date,
scan_apc_pdu_firmware_version,
scan_apc_pdu_hardware_version,
scan_apc_pdu_ipv4_address,
scan_apc_pdu_mac_address,
scan_apc_pdu_mtu_size,
scan_apc_pdu_link_speed,
scan_apc_pdu_phase_count,
scan_apc_pdu_outlet_count
FROM
scan_apc_pdus
;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
my $results = $anvil->Database->query({query => $query, source => $THIS_FILE, line => __LINE__});
my $count = @{$results};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => {
results => $results,
count => $count,
}});
# One or more records were found.
foreach my $row (@{$results})
{
my $scan_apc_pdu_uuid = $row->[0];
my $scan_apc_pdu_fence_uuid = $row->[1];
my $scan_apc_pdu_serial_number = $row->[2];
my $scan_apc_pdu_model_number = $row->[3];
my $scan_apc_pdu_manufacture_date = $row->[4];
my $scan_apc_pdu_firmware_version = $row->[5];
my $scan_apc_pdu_hardware_version = $row->[6];
my $scan_apc_pdu_ipv4_address = $row->[7];
my $scan_apc_pdu_mac_address = $row->[8];
my $scan_apc_pdu_mtu_size = $row->[9];
my $scan_apc_pdu_link_speed = $row->[10];
my $scan_apc_pdu_phase_count = $row->[11];
my $scan_apc_pdu_outlet_count = $row->[12];
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => {
scan_apc_pdu_uuid => $scan_apc_pdu_uuid,
scan_apc_pdu_fence_uuid => $scan_apc_pdu_fence_uuid,
scan_apc_pdu_serial_number => $scan_apc_pdu_serial_number,
scan_apc_pdu_model_number => $scan_apc_pdu_model_number,
scan_apc_pdu_manufacture_date => $scan_apc_pdu_manufacture_date,
scan_apc_pdu_firmware_version => $scan_apc_pdu_firmware_version,
scan_apc_pdu_hardware_version => $scan_apc_pdu_hardware_version,
scan_apc_pdu_ipv4_address => $scan_apc_pdu_ipv4_address,
scan_apc_pdu_mac_address => $scan_apc_pdu_mac_address,
scan_apc_pdu_mtu_size => $scan_apc_pdu_mtu_size,
scan_apc_pdu_link_speed => $scan_apc_pdu_link_speed,
scan_apc_pdu_phase_count => $scan_apc_pdu_phase_count,
scan_apc_pdu_outlet_count => $scan_apc_pdu_outlet_count,
}});
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_serial_number} = $scan_apc_pdu_serial_number;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_fence_uuid} = $scan_apc_pdu_fence_uuid;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_model_number} = $scan_apc_pdu_model_number;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_manufacture_date} = $scan_apc_pdu_manufacture_date;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_firmware_version} = $scan_apc_pdu_firmware_version;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_hardware_version} = $scan_apc_pdu_hardware_version;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_ipv4_address} = $scan_apc_pdu_ipv4_address;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_mac_address} = $scan_apc_pdu_mac_address;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_mtu_size} = $scan_apc_pdu_mtu_size;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_link_speed} = $scan_apc_pdu_link_speed;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phase_count} = $scan_apc_pdu_phase_count;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlet_count} = $scan_apc_pdu_outlet_count;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_serial_number" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_serial_number},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_fence_uuid" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_fence_uuid},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_model_number" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_model_number},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_manufacture_date" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_manufacture_date},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_firmware_version" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_firmware_version},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_hardware_version" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_hardware_version},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_ipv4_address" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_ipv4_address},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_mac_address" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_mac_address},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_mtu_size" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_mtu_size},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_link_speed" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_link_speed},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_phase_count" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phase_count},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_outlet_count" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlet_count},
}});
# Make it possible to find this PDU by serial number and by fence_uuid reference.
$anvil->data->{sql}{fence_uuid_to_apc_pdu_uuid}{$scan_apc_pdu_fence_uuid} = $scan_apc_pdu_uuid;
$anvil->data->{sql}{serial_number_to_apc_pdu_uuid}{$scan_apc_pdu_serial_number} = $scan_apc_pdu_uuid;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"sql::fence_uuid_to_apc_pdu_uuid::${scan_apc_pdu_fence_uuid}" => $anvil->data->{sql}{fence_uuid_to_apc_pdu_uuid}{$scan_apc_pdu_fence_uuid},
"sql::serial_number_to_apc_pdu_uuid::${scan_apc_pdu_serial_number}" => $anvil->data->{sql}{serial_number_to_apc_pdu_uuid}{$scan_apc_pdu_serial_number},
}});
}
undef $results;
# Read in the phase data
$query = "
SELECT
scan_apc_pdu_phase_uuid,
scan_apc_pdu_phase_scan_apc_pdu_uuid,
scan_apc_pdu_phase_number,
scan_apc_pdu_phase_current_amperage,
scan_apc_pdu_phase_max_amperage,
scan_apc_pdu_phase_deleted
FROM
scan_apc_pdu_phases
;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
# Do the query against the source DB and loop through the results.
$results = $anvil->Database->query({query => $query, source => $THIS_FILE, line => __LINE__});
$count = @{$results};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => {
results => $results,
count => $count,
}});
foreach my $row (@{$results})
{
my $scan_apc_pdu_phase_uuid = $row->[0];
my $scan_apc_pdu_phase_scan_apc_pdu_uuid = $row->[1];
my $scan_apc_pdu_phase_number = $row->[2];
my $scan_apc_pdu_phase_current_amperage = $row->[3];
my $scan_apc_pdu_phase_max_amperage = $row->[4];
my $scan_apc_pdu_phase_deleted = $row->[5];
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => {
scan_apc_pdu_phase_uuid => $scan_apc_pdu_phase_uuid,
scan_apc_pdu_phase_scan_apc_pdu_uuid => $scan_apc_pdu_phase_scan_apc_pdu_uuid,
scan_apc_pdu_phase_number => $scan_apc_pdu_phase_number,
scan_apc_pdu_phase_current_amperage => $scan_apc_pdu_phase_current_amperage,
scan_apc_pdu_phase_max_amperage => $scan_apc_pdu_phase_max_amperage,
scan_apc_pdu_phase_deleted => $scan_apc_pdu_phase_deleted,
}});
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_phase_scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_uuid} = $scan_apc_pdu_phase_uuid;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_phase_scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_scan_apc_pdu_uuid} = $scan_apc_pdu_phase_scan_apc_pdu_uuid;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_phase_scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_current_amperage} = $scan_apc_pdu_phase_current_amperage;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_phase_scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_max_amperage} = $scan_apc_pdu_phase_max_amperage;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_phase_scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_deleted} = $scan_apc_pdu_phase_deleted;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_phase_scan_apc_pdu_uuid}::scan_apc_pdu_phases::${scan_apc_pdu_phase_number}::scan_apc_pdu_phase_uuid" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_phase_scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_uuid},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_phase_scan_apc_pdu_uuid}::scan_apc_pdu_phases::${scan_apc_pdu_phase_number}::scan_apc_pdu_phase_scan_apc_pdu_uuid" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_phase_scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_scan_apc_pdu_uuid},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_phase_scan_apc_pdu_uuid}::scan_apc_pdu_phases::${scan_apc_pdu_phase_number}::scan_apc_pdu_phase_current_amperage" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_phase_scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_current_amperage},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_phase_scan_apc_pdu_uuid}::scan_apc_pdu_phases::${scan_apc_pdu_phase_number}::scan_apc_pdu_phase_max_amperage" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_phase_scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_max_amperage},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_phase_scan_apc_pdu_uuid}::scan_apc_pdu_phases::${scan_apc_pdu_phase_number}::scan_apc_pdu_phase_deleted" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_phase_scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_deleted},
}});
}
undef $results;
# Read in the outlets.
$query = "
SELECT
scan_apc_pdu_outlet_uuid,
scan_apc_pdu_outlet_scan_apc_pdu_uuid,
scan_apc_pdu_outlet_number,
scan_apc_pdu_outlet_name,
scan_apc_pdu_outlet_on_phase,
scan_apc_pdu_outlet_state
FROM
scan_apc_pdu_outlets
;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
$results = $anvil->Database->query({query => $query, source => $THIS_FILE, line => __LINE__});
$count = @{$results};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => {
results => $results,
count => $count,
}});
foreach my $row (@{$results})
{
my $scan_apc_pdu_outlet_uuid = $row->[0];
my $scan_apc_pdu_outlet_scan_apc_pdu_uuid = $row->[1];
my $scan_apc_pdu_outlet_number = $row->[2];
my $scan_apc_pdu_outlet_name = $row->[3];
my $scan_apc_pdu_outlet_on_phase = $row->[4];
my $scan_apc_pdu_outlet_state = $row->[5];
my $scan_apc_pdu_outlet_note = $row->[6];
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => {
scan_apc_pdu_outlet_uuid => $scan_apc_pdu_outlet_uuid,
scan_apc_pdu_outlet_scan_apc_pdu_uuid => $scan_apc_pdu_outlet_scan_apc_pdu_uuid,
scan_apc_pdu_outlet_number => $scan_apc_pdu_outlet_number,
scan_apc_pdu_outlet_name => $scan_apc_pdu_outlet_name,
scan_apc_pdu_outlet_on_phase => $scan_apc_pdu_outlet_on_phase,
scan_apc_pdu_outlet_state => $scan_apc_pdu_outlet_state,
}});
# Which serial number does this phase belong to?
my $scan_apc_pdu_serial_number = $anvil->data->{uuid_to_serial}{$scan_apc_pdu_outlet_scan_apc_pdu_uuid};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { scan_apc_pdu_serial_number => $scan_apc_pdu_serial_number }});
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_outlet_scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_uuid} = $scan_apc_pdu_outlet_uuid;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_outlet_scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_scan_apc_pdu_uuid} = $scan_apc_pdu_outlet_scan_apc_pdu_uuid;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_outlet_scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_name} = $scan_apc_pdu_outlet_name;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_outlet_scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_on_phase} = $scan_apc_pdu_outlet_on_phase;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_outlet_scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state} = $scan_apc_pdu_outlet_state;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_outlet_scan_apc_pdu_uuid}::scan_apc_pdu_outlets::${scan_apc_pdu_outlet_number}::scan_apc_pdu_outlet_uuid" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_outlet_scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_uuid},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_outlet_scan_apc_pdu_uuid}::scan_apc_pdu_outlets::${scan_apc_pdu_outlet_number}::scan_apc_pdu_outlet_scan_apc_pdu_uuid" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_outlet_scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_scan_apc_pdu_uuid},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_outlet_scan_apc_pdu_uuid}::scan_apc_pdu_outlets::${scan_apc_pdu_outlet_number}::scan_apc_pdu_outlet_name" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_outlet_scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_name},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_outlet_scan_apc_pdu_uuid}::scan_apc_pdu_outlets::${scan_apc_pdu_outlet_number}::scan_apc_pdu_outlet_on_phase" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_outlet_scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_on_phase},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_outlet_scan_apc_pdu_uuid}::scan_apc_pdu_outlets::${scan_apc_pdu_outlet_number}::scan_apc_pdu_outlet_state" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_outlet_scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state},
}});
}
undef $results;
# Read in the variables
$query = "
SELECT
scan_apc_pdu_variable_uuid,
scan_apc_pdu_variable_scan_apc_pdu_uuid,
scan_apc_pdu_variable_is_temperature,
scan_apc_pdu_variable_name,
scan_apc_pdu_variable_value
FROM
scan_apc_pdu_variables
;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
$results = $anvil->Database->query({query => $query, source => $THIS_FILE, line => __LINE__});
$count = @{$results};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => {
results => $results,
count => $count,
}});
foreach my $row (@{$results})
{
my $scan_apc_pdu_variable_uuid = $row->[0];
my $scan_apc_pdu_variable_scan_apc_pdu_uuid = $row->[1];
my $scan_apc_pdu_variable_is_temperature = $row->[2];
my $scan_apc_pdu_variable_name = $row->[3];
my $scan_apc_pdu_variable_value = $row->[4];
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => {
scan_apc_pdu_variable_uuid => $scan_apc_pdu_variable_uuid,
scan_apc_pdu_variable_scan_apc_pdu_uuid => $scan_apc_pdu_variable_scan_apc_pdu_uuid,
scan_apc_pdu_variable_is_temperature => $scan_apc_pdu_variable_is_temperature,
scan_apc_pdu_variable_name => $scan_apc_pdu_variable_name,
scan_apc_pdu_variable_value => $scan_apc_pdu_variable_value,
}});
# Store the variables under the PDU it belongs to.
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_variable_scan_apc_pdu_uuid}{scan_apc_pdu_variables}{scan_apc_pdu_variable_name}{$scan_apc_pdu_variable_name}{scan_apc_pdu_variable_uuid} = $scan_apc_pdu_variable_uuid;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_variable_scan_apc_pdu_uuid}{scan_apc_pdu_variables}{scan_apc_pdu_variable_name}{$scan_apc_pdu_variable_name}{scan_apc_pdu_variable_is_temperature} = $scan_apc_pdu_variable_is_temperature;
$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_variable_scan_apc_pdu_uuid}{scan_apc_pdu_variables}{scan_apc_pdu_variable_name}{$scan_apc_pdu_variable_name}{scan_apc_pdu_variable_value} = $scan_apc_pdu_variable_value;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_variable_scan_apc_pdu_uuid}::scan_apc_pdu_variables::scan_apc_pdu_variable_name::${scan_apc_pdu_variable_name}::scan_apc_pdu_variable_uuid" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_variable_scan_apc_pdu_uuid}{scan_apc_pdu_variables}{scan_apc_pdu_variable_name}{$scan_apc_pdu_variable_name}{scan_apc_pdu_variable_uuid},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_variable_scan_apc_pdu_uuid}::scan_apc_pdu_variables::scan_apc_pdu_variable_name::${scan_apc_pdu_variable_name}::scan_apc_pdu_variable_is_temperature" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_variable_scan_apc_pdu_uuid}{scan_apc_pdu_variables}{scan_apc_pdu_variable_name}{$scan_apc_pdu_variable_name}{scan_apc_pdu_variable_is_temperature},
"sql::scan_apc_pdu_uuid::${scan_apc_pdu_variable_scan_apc_pdu_uuid}::scan_apc_pdu_variables::scan_apc_pdu_variable_name::${scan_apc_pdu_variable_name}::scan_apc_pdu_variable_value" => $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_variable_scan_apc_pdu_uuid}{scan_apc_pdu_variables}{scan_apc_pdu_variable_name}{$scan_apc_pdu_variable_name}{scan_apc_pdu_variable_value},
}});
}
return(0);
}
# This reads in the last scan data from one of the databases and compares it against the just-read data. If
# anything changed, register an alert.
sub find_changes
{
my ($anvil) = @_;
# This stores all the queries so that they're committed in one transaction.
$anvil->data->{sys}{queries} = [];
# Loop through each PDU we've seen this pass
foreach my $scan_apc_pdu_uuid (sort {$a cmp $b} keys %{$anvil->data->{pdu}{scan_apc_pdu_uuid}})
{
my $new_pdu = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{new_pdu};
my $pdu_host_name = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{pdu_host_name};
my $scan_apc_pdu_fence_uuid = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_fence_uuid};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_uuid => $scan_apc_pdu_uuid,
new_pdu => $new_pdu,
scan_apc_pdu_fence_uuid => $scan_apc_pdu_fence_uuid,
pdu_host_name => $pdu_host_name,
}});
# Convert all the long hashes into shorter variables
my $new_scan_apc_pdu_serial_number = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_serial_number};
my $new_scan_apc_pdu_model_number = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_model_number};
my $new_scan_apc_pdu_manufacture_date = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_manufacture_date};
my $new_scan_apc_pdu_firmware_version = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_firmware_version};
my $new_scan_apc_pdu_hardware_version = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_hardware_version};
my $new_scan_apc_pdu_ipv4_address = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_ipv4_address};
my $new_scan_apc_pdu_mac_address = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address};
my $new_scan_apc_pdu_mtu_size = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mtu_size};
my $new_scan_apc_pdu_link_speed = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_link_speed};
my $new_scan_apc_pdu_phase_count = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_phase_count};
my $new_scan_apc_pdu_outlet_count = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_outlet_count};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
new_scan_apc_pdu_serial_number => $new_scan_apc_pdu_serial_number,
new_scan_apc_pdu_model_number => $new_scan_apc_pdu_model_number,
new_scan_apc_pdu_manufacture_date => $new_scan_apc_pdu_manufacture_date,
new_scan_apc_pdu_firmware_version => $new_scan_apc_pdu_firmware_version,
new_scan_apc_pdu_hardware_version => $new_scan_apc_pdu_hardware_version,
new_scan_apc_pdu_ipv4_address => $new_scan_apc_pdu_ipv4_address,
new_scan_apc_pdu_mac_address => $new_scan_apc_pdu_mac_address,
new_scan_apc_pdu_mtu_size => $new_scan_apc_pdu_mtu_size,
new_scan_apc_pdu_link_speed => $new_scan_apc_pdu_link_speed,
new_scan_apc_pdu_phase_count => $new_scan_apc_pdu_phase_count,
new_scan_apc_pdu_outlet_count => $new_scan_apc_pdu_outlet_count,
}});
# These are used later for checking the state of the phases. They are not stored in the
# database, except for max amps. They should never change.
my $new_scan_apc_pdu_phase_max_amperage = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{maximum};
my $new_phase_low_amp_warning = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{low_warning};
my $new_phase_high_amp_warning = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_warning};
my $new_phase_high_amp_critical = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_critical};
my $clear_low_amp_warning = $new_phase_low_amp_warning + $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{clear_low_warning};
my $clear_phase_high_amp_warning = $new_phase_high_amp_warning - $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{clear_high_warning};
my $clear_phase_high_amp_critical = $new_phase_high_amp_critical - $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{clear_high_critical};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
new_scan_apc_pdu_phase_max_amperage => $new_scan_apc_pdu_phase_max_amperage,
new_phase_low_amp_warning => $new_phase_low_amp_warning,
new_phase_high_amp_warning => $new_phase_high_amp_warning,
new_phase_high_amp_critical => $new_phase_high_amp_critical,
clear_low_amp_warning => $clear_low_amp_warning,
clear_phase_high_amp_warning => $clear_phase_high_amp_warning,
clear_phase_high_amp_critical => $clear_phase_high_amp_critical,
}});
# Have I seen this PDU before?
if (not $new_pdu)
{
# Yup. Search for changes.
my $old_scan_apc_pdu_serial_number = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_serial_number};
my $old_scan_apc_pdu_model_number = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_model_number};
my $old_scan_apc_pdu_manufacture_date = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_manufacture_date};
my $old_scan_apc_pdu_firmware_version = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_firmware_version};
my $old_scan_apc_pdu_hardware_version = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_hardware_version};
my $old_scan_apc_pdu_ipv4_address = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_ipv4_address};
my $old_scan_apc_pdu_mac_address = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_mac_address};
my $old_scan_apc_pdu_mtu_size = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_mtu_size};
my $old_scan_apc_pdu_link_speed = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_link_speed};
my $old_scan_apc_pdu_phase_count = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phase_count};
my $old_scan_apc_pdu_outlet_count = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlet_count};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
old_scan_apc_pdu_serial_number => $old_scan_apc_pdu_serial_number,
old_scan_apc_pdu_model_number => $old_scan_apc_pdu_model_number,
old_scan_apc_pdu_manufacture_date => $old_scan_apc_pdu_manufacture_date,
old_scan_apc_pdu_firmware_version => $old_scan_apc_pdu_firmware_version,
old_scan_apc_pdu_hardware_version => $old_scan_apc_pdu_hardware_version,
old_scan_apc_pdu_ipv4_address => $old_scan_apc_pdu_ipv4_address,
old_scan_apc_pdu_mac_address => $old_scan_apc_pdu_mac_address,
old_scan_apc_pdu_mtu_size => $old_scan_apc_pdu_mtu_size,
old_scan_apc_pdu_link_speed => $old_scan_apc_pdu_link_speed,
old_scan_apc_pdu_phase_count => $old_scan_apc_pdu_phase_count,
old_scan_apc_pdu_outlet_count => $old_scan_apc_pdu_outlet_count,
}});
# Has the phase data changed?
my $changes = 0;
if ($new_scan_apc_pdu_model_number ne $old_scan_apc_pdu_model_number)
{
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
if ($old_scan_apc_pdu_model_number eq "DELETED")
{
# It's back.
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
serial_number => $new_scan_apc_pdu_serial_number,
ip_address => $new_scan_apc_pdu_ipv4_address,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0006", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0006",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
else
{
my $variables = {
name => $pdu_host_name,
old_model_number => $old_scan_apc_pdu_model_number,
new_model_number => $new_scan_apc_pdu_model_number,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0007", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0007",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
}
if ($new_scan_apc_pdu_serial_number ne $old_scan_apc_pdu_serial_number)
{
# New PDU?
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
old_serial_number => $old_scan_apc_pdu_serial_number,
new_serial_number => $new_scan_apc_pdu_serial_number,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0008", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0008",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
if ($new_scan_apc_pdu_manufacture_date ne $old_scan_apc_pdu_manufacture_date)
{
# New PDU?
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
old_manufacture_date => $old_scan_apc_pdu_manufacture_date,
new_manufacture_date => $new_scan_apc_pdu_manufacture_date,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0009", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0009",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
if ($new_scan_apc_pdu_firmware_version ne $old_scan_apc_pdu_firmware_version)
{
# Could be a new PDU, or a firmware upgrade
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
old_firmware_version => $old_scan_apc_pdu_firmware_version,
new_firmware_version => $new_scan_apc_pdu_firmware_version,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0010", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0010",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
if ($new_scan_apc_pdu_hardware_version ne $old_scan_apc_pdu_hardware_version)
{
# Probably a new PDU
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
old_hardware_version => $old_scan_apc_pdu_hardware_version,
new_hardware_version => $new_scan_apc_pdu_hardware_version,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0011", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0011",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
if ($new_scan_apc_pdu_ipv4_address ne $old_scan_apc_pdu_ipv4_address)
{
# This could change, sure.
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
old_ipv4_address => $old_scan_apc_pdu_ipv4_address,
new_ipv4_address => $new_scan_apc_pdu_ipv4_address,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0012", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0012",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
if ($new_scan_apc_pdu_mac_address ne $old_scan_apc_pdu_mac_address)
{
# New PDU, likely
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
old_mac_address => $old_scan_apc_pdu_mac_address,
new_mac_address => $new_scan_apc_pdu_mac_address,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0013", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0013",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
if ($new_scan_apc_pdu_mtu_size ne $old_scan_apc_pdu_mtu_size)
{
# MTU size changed.
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
old_mtu_size => $old_scan_apc_pdu_mtu_size,
new_mtu_size => $new_scan_apc_pdu_mtu_size,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0014", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0014",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
if ($new_scan_apc_pdu_link_speed ne $old_scan_apc_pdu_link_speed)
{
# This could happen, too.
$changes = 1;
my $say_new_link_speed_hr = $anvil->Convert->bytes_to_human_readable({ 'bytes' => ($new_scan_apc_pdu_link_speed / 8) })."/#!string!suffix_0002!#";
my $say_new_link_speed_mbps = $anvil->Convert->add_commas({number => ($new_scan_apc_pdu_link_speed / 100000)})." #!string!suffix_0050!#";
my $say_old_link_speed_hr = $anvil->Convert->bytes_to_human_readable({ 'bytes' => ($old_scan_apc_pdu_link_speed / 8) })."/#!string!suffix_0002!#";
my $say_old_link_speed_mbps = $anvil->Convert->add_commas({number => ($old_scan_apc_pdu_link_speed / 100000)})." #!string!suffix_0050!#";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
changes => $changes,
say_new_link_speed_mbps => $say_new_link_speed_mbps,
say_new_link_speed_hr => $say_new_link_speed_hr,
say_old_link_speed_mbps => $say_old_link_speed_mbps,
say_old_link_speed_hr => $say_old_link_speed_hr,
}});
my $variables = {
name => $pdu_host_name,
new_link_speed_mbps => $say_new_link_speed_mbps,
new_link_speed_hr => $say_new_link_speed_hr,
old_link_speed_mbps => $say_old_link_speed_mbps,
old_link_speed_hr => $say_old_link_speed_hr,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0015", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0015",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
if ($new_scan_apc_pdu_phase_count ne $old_scan_apc_pdu_phase_count)
{
# New PDU, probably
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
old_phase_count => sprintf("%02d", $old_scan_apc_pdu_phase_count),
new_phase_count => sprintf("%02d", $new_scan_apc_pdu_phase_count),
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0016", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0016",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
if ($new_scan_apc_pdu_outlet_count ne $old_scan_apc_pdu_outlet_count)
{
# New PDU
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
old_outlet_count => sprintf("%02d", $old_scan_apc_pdu_outlet_count),
new_outlet_count => sprintf("%02d", $new_scan_apc_pdu_outlet_count),
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0017", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0017",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
if ($changes)
{
# Save the changes.
my $query = "
UPDATE
public.scan_apc_pdus
SET
scan_apc_pdu_serial_number = ".$anvil->Database->quote($new_scan_apc_pdu_serial_number).",
scan_apc_pdu_model_number = ".$anvil->Database->quote($new_scan_apc_pdu_model_number).",
scan_apc_pdu_manufacture_date = ".$anvil->Database->quote($new_scan_apc_pdu_manufacture_date).",
scan_apc_pdu_firmware_version = ".$anvil->Database->quote($new_scan_apc_pdu_firmware_version).",
scan_apc_pdu_hardware_version = ".$anvil->Database->quote($new_scan_apc_pdu_hardware_version).",
scan_apc_pdu_ipv4_address = ".$anvil->Database->quote($new_scan_apc_pdu_ipv4_address).",
scan_apc_pdu_mac_address = ".$anvil->Database->quote($new_scan_apc_pdu_mac_address).",
scan_apc_pdu_mtu_size = ".$anvil->Database->quote($new_scan_apc_pdu_mtu_size).",
scan_apc_pdu_link_speed = ".$anvil->Database->quote($new_scan_apc_pdu_link_speed).",
scan_apc_pdu_phase_count = ".$anvil->Database->quote($new_scan_apc_pdu_phase_count).",
scan_apc_pdu_outlet_count = ".$anvil->Database->quote($new_scan_apc_pdu_outlet_count).",
modified_date = ".$anvil->Database->quote($anvil->Database->refresh_timestamp)."
WHERE
scan_apc_pdu_uuid = ".$anvil->Database->quote($scan_apc_pdu_uuid)."
;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
push @{$anvil->data->{sys}{queries}}, $query;
}
### What about other variables?
# Do I have a previous uptime?
my $new_uptime = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{uptime};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { new_uptime => $new_uptime }});
if ($anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{scan_apc_pdu_variable_name}{uptime}{scan_apc_pdu_variable_uuid})
{
# Exists, change?
my $scan_apc_pdu_variable_uuid = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{scan_apc_pdu_variable_name}{uptime}{scan_apc_pdu_variable_uuid};
my $old_uptime = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{scan_apc_pdu_variable_name}{uptime}{scan_apc_pdu_variable_value};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_variable_uuid => $scan_apc_pdu_variable_uuid,
old_uptime => $old_uptime,
new_uptime => $new_uptime,
}});
if ($new_uptime ne $old_uptime)
{
update_variables($anvil, $scan_apc_pdu_variable_uuid, "uptime", $new_uptime);
# We expect this to change upward. If the new uptime is significantly
# less than the old, it rebooted. We put the 300 second buffer
# because it's not uncommon for the current uptime to report as
# slightly behind the previous read. (Thanks, APC...)
my $variables = {
name => $pdu_host_name,
old_uptime => $anvil->Convert->time({'time' => $old_uptime}),
new_uptime => $anvil->Convert->time({'time' => $new_uptime}),
};
if ($new_uptime > $old_uptime)
{
# Normal, info-level
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 2, key => "scan_apc_pdu_message_0018", variables => $variables});
$anvil->Alert->register({
alert_level => "info",
message => "scan_apc_pdu_message_0018",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
elsif (($new_uptime < $old_uptime) && ($new_uptime < 300))
{
# It's rebooted. This is notice level as it's generally just
# the NIC rebooting and doesn't interfere with power.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0019", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0019",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
}
}
else
{
# New, INSERT it (is_temperature is always false for now).
insert_variables($anvil, $scan_apc_pdu_uuid, "uptime", $new_uptime);
}
# Do I have a previous wattage?
my $new_total_wattage_draw = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{total_wattage_draw};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { new_total_wattage_draw => $new_total_wattage_draw }});
if ($anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{scan_apc_pdu_variable_name}{total_wattage_draw}{scan_apc_pdu_variable_uuid})
{
# Exists, change?
my $scan_apc_pdu_variable_uuid = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{scan_apc_pdu_variable_name}{total_wattage_draw}{scan_apc_pdu_variable_uuid};
my $old_total_wattage_draw = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{scan_apc_pdu_variable_name}{total_wattage_draw}{scan_apc_pdu_variable_value};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_variable_uuid => $scan_apc_pdu_variable_uuid,
old_total_wattage_draw => $old_total_wattage_draw,
}});
if ($new_total_wattage_draw ne $old_total_wattage_draw)
{
my $variables = {
name => $pdu_host_name,
old_total_wattage_draw => $old_total_wattage_draw,
new_total_wattage_draw => $new_total_wattage_draw,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 2, key => "scan_apc_pdu_message_0020", variables => $variables});
$anvil->Alert->register({
alert_level => "info",
message => "scan_apc_pdu_message_0020",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
update_variables($anvil, $scan_apc_pdu_variable_uuid, "total_wattage_draw", $new_total_wattage_draw);
}
}
else
{
# New, INSERT it (is_temperature is always false for now).
insert_variables($anvil, $scan_apc_pdu_uuid, "total_wattage_draw", $new_total_wattage_draw);
}
# Have any phases changed?
foreach my $scan_apc_pdu_phase_number (sort {$a cmp $b} keys %{$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}})
{
my $new_scan_apc_pdu_phase_current_amperage = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_current_amperage};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_phase_number => $scan_apc_pdu_phase_number,
new_scan_apc_pdu_phase_current_amperage => $new_scan_apc_pdu_phase_current_amperage,
new_scan_apc_pdu_phase_max_amperage => $new_scan_apc_pdu_phase_max_amperage,
new_total_wattage_draw => $new_total_wattage_draw,
}});
if ($anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_uuid})
{
# We've seen this phase before. Changes?
my $scan_apc_pdu_phase_uuid = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_uuid};
my $old_scan_apc_pdu_phase_scan_apc_pdu_uuid = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_scan_apc_pdu_uuid};
my $old_scan_apc_pdu_phase_current_amperage = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_current_amperage};
my $old_scan_apc_pdu_phase_max_amperage = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_max_amperage};
my $old_scan_apc_pdu_phase_deleted = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_deleted};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_phase_uuid => $scan_apc_pdu_phase_uuid,
old_scan_apc_pdu_phase_scan_apc_pdu_uuid => $old_scan_apc_pdu_phase_scan_apc_pdu_uuid,
old_scan_apc_pdu_phase_current_amperage => $old_scan_apc_pdu_phase_current_amperage,
old_scan_apc_pdu_phase_max_amperage => $old_scan_apc_pdu_phase_max_amperage,
old_scan_apc_pdu_phase_deleted => $old_scan_apc_pdu_phase_deleted,
}});
# If the 'deleted' was set, the phase has returned.
if ($old_scan_apc_pdu_phase_deleted)
{
# The phase amperage can change all the time.
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
phase => sprintf("%02d", $scan_apc_pdu_phase_number),
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0021", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0021",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
# The max amps per phase is set across all phases.
if ($new_scan_apc_pdu_phase_max_amperage ne $old_scan_apc_pdu_phase_max_amperage)
{
# This can be set by the user in the PDU's interface
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
phase => sprintf("%02d", $scan_apc_pdu_phase_number),
old_phase_max_amperage => $old_scan_apc_pdu_phase_max_amperage,
new_phase_max_amperage => $new_scan_apc_pdu_phase_max_amperage,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0022", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0022",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
if ($old_scan_apc_pdu_phase_current_amperage ne $new_scan_apc_pdu_phase_current_amperage)
{
# The phase amperage can change all the time. That said, is
# it over the warning or critical thresholds, or has it
# dropped back down?
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
phase => sprintf("%02d", $scan_apc_pdu_phase_number),
old_phase_current_amperage => $old_scan_apc_pdu_phase_current_amperage,
new_phase_current_amperage => $new_scan_apc_pdu_phase_current_amperage,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 2, key => "scan_apc_pdu_message_0023", variables => $variables});
$anvil->Alert->register({
alert_level => "info",
message => "scan_apc_pdu_message_0023",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
# Cheack for low alerts to set or high alerts to clear
if ($new_scan_apc_pdu_phase_current_amperage < $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{low_warning})
{
### NOTE: We don't care about low amperage warnings, but it
### is a user-configurable value. As such, we'll register alers.
# Dropped too low, clear high warn and high crit
my $changed = $anvil->Alert->check_alert_sent({
debug => 2,
record_locator => "scan_apc-pdu::".$scan_apc_pdu_uuid."::phase::".$scan_apc_pdu_phase_number."::amp_low_warning",
set_by => $THIS_FILE,
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changed => $changed }});
if ($changed)
{
# Register an alert.
my $variables = {
pdu_name => $pdu_host_name,
phase => sprintf("%02d", $scan_apc_pdu_phase_number),
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0024", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0024",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
# Clear the high-warning and high-critical, if needed.
clear_phase_high_critical($anvil, $pdu_host_name, $scan_apc_pdu_phase_number, $scan_apc_pdu_uuid);
clear_phase_high_warning($anvil, $pdu_host_name, $scan_apc_pdu_phase_number, $scan_apc_pdu_uuid);
}
elsif ($new_scan_apc_pdu_phase_current_amperage < $clear_phase_high_amp_warning)
{
# Dropped low enough to clear high warn and high crit
clear_phase_high_critical($anvil, $pdu_host_name, $scan_apc_pdu_phase_number, $scan_apc_pdu_uuid);
clear_phase_high_warning($anvil, $pdu_host_name, $scan_apc_pdu_phase_number, $scan_apc_pdu_uuid);
}
elsif ($new_scan_apc_pdu_phase_current_amperage < $clear_phase_high_amp_critical)
{
# Dropped low enough to clear high crit.
clear_phase_high_critical($anvil, $pdu_host_name, $scan_apc_pdu_phase_number, $scan_apc_pdu_uuid);
}
# Cheack for low alerts to clear or high alerts to set
if ($new_scan_apc_pdu_phase_current_amperage > $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_critical})
{
# Set high crit, clear low warn
set_phase_high_critical($anvil, $pdu_host_name, $scan_apc_pdu_phase_number, $scan_apc_pdu_uuid);
clear_phase_low_warning($anvil, $pdu_host_name, $scan_apc_pdu_phase_number, $scan_apc_pdu_uuid);
}
elsif ($new_scan_apc_pdu_phase_current_amperage > $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_warning})
{
# Set high warn
set_phase_high_warning($anvil, $pdu_host_name, $scan_apc_pdu_phase_number, $scan_apc_pdu_uuid);
clear_phase_low_warning($anvil, $pdu_host_name, $scan_apc_pdu_phase_number, $scan_apc_pdu_uuid);
}
elsif ($new_scan_apc_pdu_phase_current_amperage > $clear_low_amp_warning)
{
# Clear the low warning
clear_phase_low_warning($anvil, $pdu_host_name, $scan_apc_pdu_phase_number, $scan_apc_pdu_uuid);
}
}
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
if ($changes)
{
my $query = "
UPDATE
scan_apc_pdu_phases
SET
scan_apc_pdu_phase_scan_apc_pdu_uuid = ".$anvil->Database->quote($scan_apc_pdu_uuid).",
scan_apc_pdu_phase_number = ".$anvil->Database->quote($scan_apc_pdu_phase_number).",
scan_apc_pdu_phase_current_amperage = ".$anvil->Database->quote($new_scan_apc_pdu_phase_current_amperage).",
scan_apc_pdu_phase_max_amperage = ".$anvil->Database->quote($new_scan_apc_pdu_phase_max_amperage).",
modified_date = ".$anvil->Database->quote($anvil->Database->refresh_timestamp)."
WHERE
scan_apc_pdu_phase_uuid = ".$anvil->Database->quote($scan_apc_pdu_phase_uuid)."
;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
push @{$anvil->data->{sys}{queries}}, $query;
}
}
delete $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number};
}
# Any phases that vanished?
foreach my $scan_apc_pdu_phase_number (sort {$a cmp $b} keys %{$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}})
{
# Did it just vanish?
my $scan_apc_pdu_phase_uuid = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_uuid};
my $scan_apc_pdu_phase_deleted = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_deleted};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_phase_uuid => $scan_apc_pdu_phase_uuid,
scan_apc_pdu_phase_deleted => $scan_apc_pdu_phase_deleted,
}});
if (not $scan_apc_pdu_phase_deleted)
{
# Yup
my $query = "
UPDATE
scan_apc_pdu_phases
SET
scan_apc_pdu_phase_deleted = 'DELETED',
modified_date = ".$anvil->Database->quote($anvil->Database->refresh_timestamp)."
WHERE
scan_apc_pdu_phase_uuid = ".$anvil->Database->quote($scan_apc_pdu_phase_uuid)."
;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
push @{$anvil->data->{sys}{queries}}, $query;
my $variables = {
name => $pdu_host_name,
phase => sprintf("%02d", $scan_apc_pdu_phase_number),
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0030", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0030",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
}
# Have any outlets changed?
foreach my $scan_apc_pdu_outlet_number (sort {$a cmp $b} keys %{$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}})
{
my $new_scan_apc_pdu_outlet_name = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_name};
my $new_scan_apc_pdu_outlet_on_phase = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_on_phase};
my $new_scan_apc_pdu_outlet_state = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
new_scan_apc_pdu_outlet_name => $new_scan_apc_pdu_outlet_name,
new_scan_apc_pdu_outlet_on_phase => $new_scan_apc_pdu_outlet_on_phase,
new_scan_apc_pdu_outlet_state => $new_scan_apc_pdu_outlet_state,
}});
# Do I know about this outlet?
if ($anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_uuid})
{
# Yup!
my $scan_apc_pdu_outlet_uuid = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_uuid};
my $old_scan_apc_pdu_outlet_name = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_name};
my $old_scan_apc_pdu_outlet_on_phase = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_on_phase};
my $old_scan_apc_pdu_outlet_state = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_outlet_uuid => $scan_apc_pdu_outlet_uuid,
old_scan_apc_pdu_outlet_name => $old_scan_apc_pdu_outlet_name,
old_scan_apc_pdu_outlet_on_phase => $old_scan_apc_pdu_outlet_on_phase,
old_scan_apc_pdu_outlet_state => $old_scan_apc_pdu_outlet_state,
}});
# Did a vanished outlet come back?
my $changes = 0;
if ($old_scan_apc_pdu_outlet_name eq "DELETED")
{
# It's back!
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
outlet => sprintf("%02d", $scan_apc_pdu_outlet_number),
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0031", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0031",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
if ($new_scan_apc_pdu_outlet_name ne $old_scan_apc_pdu_outlet_name)
{
# Name changed.
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
outlet => sprintf("%02d", $scan_apc_pdu_outlet_number),
old_outlet_name => $old_scan_apc_pdu_outlet_name,
new_outlet_name => $new_scan_apc_pdu_outlet_name,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0032", variables => $variables});
$anvil->Alert->register({
alert_level => "notice",
message => "scan_apc_pdu_message_0032",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
if ($new_scan_apc_pdu_outlet_on_phase ne $old_scan_apc_pdu_outlet_on_phase)
{
# Phase changed, but why tho?
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
outlet => sprintf("%02d", $scan_apc_pdu_outlet_number),
old_outlet_on_phase => $old_scan_apc_pdu_outlet_on_phase,
new_outlet_on_phase => $new_scan_apc_pdu_outlet_on_phase,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0033", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0033",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
if ($new_scan_apc_pdu_outlet_state ne $old_scan_apc_pdu_outlet_state)
{
# This is likely from a fence action, so we make it critical
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
outlet => sprintf("%02d", $scan_apc_pdu_outlet_number),
old_outlet_state => $old_scan_apc_pdu_outlet_state,
new_outlet_state => $new_scan_apc_pdu_outlet_state,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0034", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0034",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
if ($changes)
{
# Save.
my $query = "
UPDATE
scan_apc_pdu_outlets
SET
scan_apc_pdu_outlet_scan_apc_pdu_uuid = ".$anvil->Database->quote($scan_apc_pdu_uuid).",
scan_apc_pdu_outlet_number = ".$anvil->Database->quote($scan_apc_pdu_outlet_number).",
scan_apc_pdu_outlet_name = ".$anvil->Database->quote($new_scan_apc_pdu_outlet_name).",
scan_apc_pdu_outlet_on_phase = ".$anvil->Database->quote($new_scan_apc_pdu_outlet_on_phase).",
scan_apc_pdu_outlet_state = ".$anvil->Database->quote($new_scan_apc_pdu_outlet_state).",
modified_date = ".$anvil->Database->quote($anvil->Database->refresh_timestamp)."
WHERE
scan_apc_pdu_outlet_uuid = ".$anvil->Database->quote($scan_apc_pdu_outlet_uuid)."
;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
push @{$anvil->data->{sys}{queries}}, $query;
}
}
else
{
# Nope, INSERT it.
insert_outlets($anvil, $scan_apc_pdu_uuid, $scan_apc_pdu_outlet_number, $new_scan_apc_pdu_outlet_name, $new_scan_apc_pdu_outlet_on_phase, $new_scan_apc_pdu_outlet_state);
my $say_state = "#!string!scan_apc_pdu_unit_0001!#";
if ($new_scan_apc_pdu_outlet_state eq "on")
{
$say_state = "#!string!scan_apc_pdu_unit_0002!#";
}
elsif ($new_scan_apc_pdu_outlet_state eq "off")
{
$say_state = "#!string!scan_apc_pdu_unit_0003!#";
}
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { new_scan_apc_pdu_outlet_state => $new_scan_apc_pdu_outlet_state }});
my $variables = {
pdu_name => $pdu_host_name,
outlet => sprintf("%02d", $scan_apc_pdu_outlet_number),
'state' => $say_state,
on_phase => sprintf("%02d", $new_scan_apc_pdu_outlet_on_phase),
name => $new_scan_apc_pdu_outlet_name,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0035", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0035",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
delete $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number};
}
# Any outlets vanished?
foreach my $scan_apc_pdu_outlet_number (sort {$a cmp $b} keys %{$anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}})
{
# Lost, update the note.
my $scan_apc_pdu_outlet_uuid = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_uuid};
my $old_scan_apc_pdu_outlet_name = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_name};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_outlet_uuid => $scan_apc_pdu_outlet_uuid,
old_scan_apc_pdu_outlet_name => $old_scan_apc_pdu_outlet_name,
}});
if ($old_scan_apc_pdu_outlet_name ne "DELETED")
{
# Yup
my $query = "
UPDATE
scan_apc_pdu_outlets
SET
scan_apc_pdu_outlet_name = 'DELETED',
modified_date = ".$anvil->Database->quote($anvil->Database->refresh_timestamp)."
WHERE
scan_apc_pdu_outlet_uuid = ".$anvil->Database->quote($scan_apc_pdu_outlet_uuid)."
;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
push @{$anvil->data->{sys}{queries}}, $query;
$changes = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changes => $changes }});
my $variables = {
name => $pdu_host_name,
outlet => sprintf("%02d", $scan_apc_pdu_outlet_number),
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0036", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0036",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
}
# Delete this from the SQL hash so we know it didn't vanish.
delete $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid};
}
else
{
# OK, now INSERT it.
my $query = "
INSERT INTO
scan_apc_pdus
(
scan_apc_pdu_uuid,
scan_apc_pdu_fence_uuid,
scan_apc_pdu_serial_number,
scan_apc_pdu_model_number,
scan_apc_pdu_manufacture_date,
scan_apc_pdu_firmware_version,
scan_apc_pdu_hardware_version,
scan_apc_pdu_ipv4_address,
scan_apc_pdu_mac_address,
scan_apc_pdu_mtu_size,
scan_apc_pdu_link_speed,
scan_apc_pdu_phase_count,
scan_apc_pdu_outlet_count,
modified_date
) VALUES (
".$anvil->Database->quote($scan_apc_pdu_uuid).",
".$anvil->Database->quote($scan_apc_pdu_fence_uuid).",
".$anvil->Database->quote($new_scan_apc_pdu_serial_number).",
".$anvil->Database->quote($new_scan_apc_pdu_model_number).",
".$anvil->Database->quote($new_scan_apc_pdu_manufacture_date).",
".$anvil->Database->quote($new_scan_apc_pdu_firmware_version).",
".$anvil->Database->quote($new_scan_apc_pdu_hardware_version).",
".$anvil->Database->quote($new_scan_apc_pdu_ipv4_address).",
".$anvil->Database->quote($new_scan_apc_pdu_mac_address).",
".$anvil->Database->quote($new_scan_apc_pdu_mtu_size).",
".$anvil->Database->quote($new_scan_apc_pdu_link_speed).",
".$anvil->Database->quote($new_scan_apc_pdu_phase_count).",
".$anvil->Database->quote($new_scan_apc_pdu_outlet_count).",
".$anvil->Database->quote($anvil->Database->refresh_timestamp)."
);";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
push @{$anvil->data->{sys}{queries}}, $query;
# Send an alert telling the user about this new PDU.
my $say_link_speed_hr = "#!string!scan_apc_pdu_unit_0004!#"; # "Down"
my $say_link_speed_mbps = "#!string!scan_apc_pdu_unit_0004!#"; # "Down"
if (($new_scan_apc_pdu_link_speed) && ($new_scan_apc_pdu_link_speed =~ /^\d+$/))
{
$say_link_speed_hr = $anvil->Convert->bytes_to_human_readable({'bytes' => ($new_scan_apc_pdu_link_speed / 8)})."/#!string!scan_apc_pdu_unit_0006!#";
$say_link_speed_mbps = ($new_scan_apc_pdu_link_speed / 1000000)." #!string!scan_apc_pdu_unit_0005!#";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
say_link_speed_hr => $say_link_speed_hr,
say_link_speed_mbps => $say_link_speed_mbps,
}});
}
# Record the variables (uptime and wattage)
foreach my $variable (sort {$a cmp $b} keys %{$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}})
{
my $value = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{$variable};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
variable => $variable,
value => $value,
}});
# NOTE: We don't send an alert here as we incorporated the two variables we care about above.
insert_variables($anvil, $scan_apc_pdu_uuid, $variable, $value);
}
# Load the variables we know about.
my $new_uptime = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{uptime};
my $new_total_wattage_draw = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{total_wattage_draw};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
new_uptime => $new_uptime." (".$anvil->Convert->time({'time' => $new_uptime}).")",
new_total_wattage_draw => $new_total_wattage_draw
}});
my $variables = {
name => $pdu_host_name,
serial_number => $new_scan_apc_pdu_serial_number,
model_number => $new_scan_apc_pdu_model_number,
manufacture_date => $new_scan_apc_pdu_manufacture_date." #!string!scan_apc_pdu_unit_0007!#",
firmware_version => $new_scan_apc_pdu_firmware_version,
hardware_version => $new_scan_apc_pdu_hardware_version,
ipv4_address => $new_scan_apc_pdu_ipv4_address,
mac_address => $new_scan_apc_pdu_mac_address,
mtu_size => $new_scan_apc_pdu_mtu_size,
link_speed_hr => $say_link_speed_hr,
link_speed_mbps => $say_link_speed_mbps,
phase_count => $new_scan_apc_pdu_phase_count,
outlet_count => $new_scan_apc_pdu_outlet_count,
phase_max_amperage => $new_scan_apc_pdu_phase_max_amperage,
phase_low_amp_warning => $new_phase_low_amp_warning,
phase_high_amp_warning => $new_phase_high_amp_warning,
phase_high_amp_critical => $new_phase_high_amp_critical,
uptime => $anvil->Convert->time({'time' => $new_uptime}),
total_wattage_draw => $new_total_wattage_draw,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0037", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0037",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
# Insert the phase data
foreach my $scan_apc_pdu_phase_number (sort {$a cmp $b} keys %{$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}})
{
my $scan_apc_pdu_phase_uuid = $anvil->Get->uuid();
my $new_scan_apc_pdu_phase_current_amperage = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_current_amperage};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_phase_uuid => $scan_apc_pdu_phase_uuid,
new_scan_apc_pdu_phase_current_amperage => $new_scan_apc_pdu_phase_current_amperage,
}});
my $query = "
INSERT INTO
scan_apc_pdu_phases
(
scan_apc_pdu_phase_uuid,
scan_apc_pdu_phase_scan_apc_pdu_uuid,
scan_apc_pdu_phase_number,
scan_apc_pdu_phase_current_amperage,
scan_apc_pdu_phase_max_amperage,
modified_date
) VALUES (
".$anvil->Database->quote($scan_apc_pdu_phase_uuid).",
".$anvil->Database->quote($scan_apc_pdu_uuid).",
".$anvil->Database->quote($scan_apc_pdu_phase_number).",
".$anvil->Database->quote($new_scan_apc_pdu_phase_current_amperage).",
".$anvil->Database->quote($new_scan_apc_pdu_phase_max_amperage).",
".$anvil->Database->quote($anvil->Database->refresh_timestamp)."
);";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
push @{$anvil->data->{sys}{queries}}, $query;
my $variables = {
phase => sprintf("%02d", $scan_apc_pdu_phase_number),
amps => $new_scan_apc_pdu_phase_current_amperage,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0038", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0038",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
# Insert the outlet data
foreach my $scan_apc_pdu_outlet_number (sort {$a cmp $b} keys %{$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}})
{
my $scan_apc_pdu_outlet_uuid = $anvil->Get->uuid();
my $new_scan_apc_pdu_outlet_name = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_name};
my $new_scan_apc_pdu_outlet_on_phase = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_on_phase};
my $new_scan_apc_pdu_outlet_state = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_outlet_uuid => $scan_apc_pdu_outlet_uuid,
new_scan_apc_pdu_outlet_name => $new_scan_apc_pdu_outlet_name,
new_scan_apc_pdu_outlet_on_phase => $new_scan_apc_pdu_outlet_on_phase,
new_scan_apc_pdu_outlet_state => $new_scan_apc_pdu_outlet_state,
}});
insert_outlets($anvil, $scan_apc_pdu_uuid, $scan_apc_pdu_outlet_number, $new_scan_apc_pdu_outlet_name, $new_scan_apc_pdu_outlet_on_phase, $new_scan_apc_pdu_outlet_state);
my $say_state = "#!string!scan_apc_pdu_unit_0001!#";
if ($new_scan_apc_pdu_outlet_state eq "on")
{
$say_state = "#!string!scan_apc_pdu_unit_0002!#";
}
elsif ($new_scan_apc_pdu_outlet_state eq "off")
{
$say_state = "#!string!scan_apc_pdu_unit_0003!#";
}
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { new_scan_apc_pdu_outlet_state => $new_scan_apc_pdu_outlet_state }});
my $variables = {
outlet => sprintf("%02d", $scan_apc_pdu_outlet_number),
'state' => $say_state,
on_phase => sprintf("%02d", $new_scan_apc_pdu_outlet_on_phase),
name => $new_scan_apc_pdu_outlet_name,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0039", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0039",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
}
}
# Look for PDUs that we saw before that are gone now.
foreach my $scan_apc_pdu_uuid (sort {$a cmp $b} keys %{$anvil->data->{sql}{scan_apc_pdu_uuid}})
{
# Gone! Is this the first time it's disappeared?
my $scan_apc_pdu_serial_number = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_serial_number};
my $scan_apc_pdu_model_number = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_model_number};
my $scan_apc_pdu_ipv4_address = $anvil->data->{sql}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_ipv4_address};
$scan_apc_pdu_ipv4_address = "--" if not defined $scan_apc_pdu_ipv4_address;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_uuid => $scan_apc_pdu_uuid,
scan_apc_pdu_serial_number => $scan_apc_pdu_serial_number,
scan_apc_pdu_model_number => $scan_apc_pdu_model_number,
scan_apc_pdu_ipv4_address => $scan_apc_pdu_ipv4_address,
}});
if ($scan_apc_pdu_model_number ne "DELETED")
{
# Yup! send an alert.
my $query = "
UPDATE
scan_apc_pdus
SET
scan_apc_pdu_model_number = 'DELETED',
modified_date = ".$anvil->Database->quote($anvil->Database->refresh_timestamp)."
WHERE
scan_apc_pdu_uuid = ".$anvil->Database->quote($scan_apc_pdu_uuid)."
;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
push @{$anvil->data->{sys}{queries}}, $query;
my $variables = {
model => $scan_apc_pdu_model_number,
serial_numer => $scan_apc_pdu_serial_number,
ip_address => $scan_apc_pdu_ipv4_address,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0040", variables => $variables});
$anvil->Alert->register({
alert_level => "warning",
message => "scan_apc_pdu_message_0040",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
}
}
# Commit the queries.
$anvil->Database->write({query => $anvil->data->{sys}{queries}, debug => 2, source => $THIS_FILE, line => __LINE__});
return(0);
}
# Set the phase-low alert, if not clear before
sub clear_phase_low_warning
{
my ($anvil, $pdu_host_name, $scan_apc_pdu_phase_number, $scan_apc_pdu_uuid) = @_;
my $changed = $anvil->Alert->check_alert_sent({
debug => 3,
record_locator => "scan_apc-pdu::".$scan_apc_pdu_uuid."::phase::".$scan_apc_pdu_phase_number."::amp_low_warning",
set_by => $THIS_FILE,
clear => 1,
});
if ($changed)
{
# Register an alert-cleared event.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0029"});
$anvil->Alert->register({
alert_level => "notice",
clear => 1,
message => "scan_apc_pdu_message_0029",
set_by => $THIS_FILE,
});
}
return(0);
}
# This sets the phase amparage high warning alert, if set.
sub set_phase_high_warning
{
my ($anvil, $pdu_host_name, $scan_apc_pdu_phase_number, $scan_apc_pdu_uuid) = @_;
my $changed = $anvil->Alert->check_alert_sent({
debug => 3,
record_locator => "scan_apc-pdu::".$scan_apc_pdu_uuid."::phase::".$scan_apc_pdu_phase_number."::amp_high_warning",
set_by => $THIS_FILE,
});
if ($changed)
{
# Register an alert-cleared event.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0027"});
$anvil->Alert->register({
alert_level => "notice",
clear => 1,
message => "scan_apc_pdu_message_0027",
set_by => $THIS_FILE,
});
}
return(0)
}
# This clears the phase amparage high warning alert, if set.
sub clear_phase_high_warning
{
my ($anvil, $pdu_host_name, $scan_apc_pdu_phase_number, $scan_apc_pdu_uuid) = @_;
my $changed = $anvil->Alert->check_alert_sent({
debug => 3,
record_locator => "scan_apc-pdu::".$scan_apc_pdu_uuid."::phase::".$scan_apc_pdu_phase_number."::amp_high_warning",
set_by => $THIS_FILE,
clear => 1,
});
if ($changed)
{
# Register an alert-cleared event.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0028"});
$anvil->Alert->register({
alert_level => "notice",
clear => 1,
message => "scan_apc_pdu_message_0028",
set_by => $THIS_FILE,
});
}
return(0)
}
# This sets the phase high-critical alert, if not already.
sub set_phase_high_critical
{
my ($anvil, $pdu_host_name, $scan_apc_pdu_phase_number, $scan_apc_pdu_uuid) = @_;
my $changed = $anvil->Alert->check_alert_sent({
debug => 3,
record_locator => "scan_apc-pdu::".$scan_apc_pdu_uuid."::phase::".$scan_apc_pdu_phase_number."::amp_high_critical",
set_by => $THIS_FILE,
});
if ($changed)
{
# Register an alert-cleared event.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0025"});
$anvil->Alert->register({
alert_level => "notice",
clear => 1,
message => "scan_apc_pdu_message_0025",
set_by => $THIS_FILE,
});
}
return(0);
}
# This clears the phase amparage high critical alert, if set.
sub clear_phase_high_critical
{
my ($anvil, $pdu_host_name, $scan_apc_pdu_phase_number, $scan_apc_pdu_uuid) = @_;
my $changed = $anvil->Alert->check_alert_sent({
debug => 3,
record_locator => "scan_apc-pdu::".$scan_apc_pdu_uuid."::phase::".$scan_apc_pdu_phase_number."::amp_high_critical",
set_by => $THIS_FILE,
clear => 1,
});
if ($changed)
{
# Register an alert-cleared event.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_message_0026"});
$anvil->Alert->register({
alert_level => "notice",
clear => 1,
message => "scan_apc_pdu_message_0026",
set_by => $THIS_FILE,
});
}
return(0)
}
# This INSERTs a new outlet
sub insert_outlets
{
my ($anvil, $scan_apc_pdu_uuid, $scan_apc_pdu_outlet_number, $scan_apc_pdu_outlet_name, $scan_apc_pdu_outlet_on_phase, $scan_apc_pdu_outlet_state) = @_;
my $scan_apc_pdu_outlet_uuid = $anvil->Get->uuid();
my $query = "
INSERT INTO
scan_apc_pdu_outlets
(
scan_apc_pdu_outlet_uuid,
scan_apc_pdu_outlet_scan_apc_pdu_uuid,
scan_apc_pdu_outlet_number,
scan_apc_pdu_outlet_name,
scan_apc_pdu_outlet_on_phase,
scan_apc_pdu_outlet_state,
modified_date
) VALUES (
".$anvil->Database->quote($scan_apc_pdu_outlet_uuid).",
".$anvil->Database->quote($scan_apc_pdu_uuid).",
".$anvil->Database->quote($scan_apc_pdu_outlet_number).",
".$anvil->Database->quote($scan_apc_pdu_outlet_name).",
".$anvil->Database->quote($scan_apc_pdu_outlet_on_phase).",
".$anvil->Database->quote($scan_apc_pdu_outlet_state).",
".$anvil->Database->quote($anvil->Database->refresh_timestamp)."
);";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
push @{$anvil->data->{sys}{queries}}, $query;
return($scan_apc_pdu_outlet_uuid);
}
# This UPDATEs a variable
sub update_variables
{
my ($anvil, $scan_apc_pdu_variable_uuid, $variable, $value) = @_;
my $query = "
UPDATE
scan_apc_pdu_variables
SET
scan_apc_pdu_variable_name = ".$anvil->Database->quote($variable).",
scan_apc_pdu_variable_value = ".$anvil->Database->quote($value).",
modified_date = ".$anvil->Database->quote($anvil->Database->refresh_timestamp)."
WHERE
scan_apc_pdu_variable_uuid = ".$anvil->Database->quote($scan_apc_pdu_variable_uuid)."
;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
push @{$anvil->data->{sys}{queries}}, $query;
return(0);
}
# This INSERTs a new variable
sub insert_variables
{
my ($anvil, $scan_apc_pdu_uuid, $variable, $value) = @_;
my $scan_apc_pdu_variable_uuid = $anvil->Get->uuid();
my $query = "
INSERT INTO
scan_apc_pdu_variables
(
scan_apc_pdu_variable_uuid,
scan_apc_pdu_variable_scan_apc_pdu_uuid,
scan_apc_pdu_variable_is_temperature,
scan_apc_pdu_variable_name,
scan_apc_pdu_variable_value,
modified_date
) VALUES (
".$anvil->Database->quote($scan_apc_pdu_variable_uuid).",
".$anvil->Database->quote($scan_apc_pdu_uuid).",
FALSE,
".$anvil->Database->quote($variable).",
".$anvil->Database->quote($value).",
".$anvil->Database->quote($anvil->Database->refresh_timestamp)."
);";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
push @{$anvil->data->{sys}{queries}}, $query;
return($scan_apc_pdu_variable_uuid);
}
# This calls each PDU, first to get the model number and update the OIDs to use if needed, then gathers the
# information from the PDU.
sub gather_pdu_data
{
my ($anvil) = @_;
# Loop through the PDUs we found in fences.
foreach my $fence_uuid (sort {$a cmp $b} keys %{$anvil->data->{fences}{fence_uuid}})
{
my $pdu_ip = $anvil->data->{fences}{fence_uuid}{$fence_uuid}{ip_address};
my $pdu_name = $anvil->data->{fences}{fence_uuid}{$fence_uuid}{name};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
fence_uuid => $fence_uuid,
pdu_ip => $pdu_ip,
pdu_name => $pdu_name,
}});
# Have we seen this PDU before? We may have info in our database that's not mapped to fences
# yet, so we'll also check by serial number as well.
my $scan_apc_pdu_uuid = "";
my $new_pdu = 1;
if ((exists $anvil->data->{sql}{fence_uuid_to_apc_pdu_uuid}{$fence_uuid}) && (defined $anvil->data->{sql}{fence_uuid_to_apc_pdu_uuid}{$fence_uuid}))
{
# Yup!
$new_pdu = 0;
$scan_apc_pdu_uuid = $anvil->data->{sql}{fence_uuid_to_apc_pdu_uuid}{$fence_uuid};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_uuid => $scan_apc_pdu_uuid,
new_pdu => $new_pdu,
}});
}
# Can I ping it? This returns '1' if it was pingable, '0' if not.
my ($pinged, $average_time) = $anvil->Network->ping({ping => $pdu_ip});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
pinged => $pinged,
average_time => $average_time,
}});
if (not $pinged)
{
# Can't reach it.
$anvil->data->{fences}{fence_uuid}{$fence_uuid}{ping} = 0;
$anvil->data->{fences}{fence_uuid}{$fence_uuid}{connected} = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"fences::fence_uuid::${fence_uuid}::ping" => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{ping},
"fences::fence_uuid::${fence_uuid}::connected" => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{connected},
}});
next;
}
$anvil->data->{fences}{fence_uuid}{$fence_uuid}{ping} = 1;
$anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version} = $anvil->data->{snmp}{community}{version};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"fences::fence_uuid::${fence_uuid}::ping" => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{ping},
"fences::fence_uuid::${fence_uuid}::snmp_version" => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
}});
my ($scan_apc_pdu_serial_number, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu}{scan_apc_pdu_serial_number},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_serial_number => $scan_apc_pdu_serial_number,
data_type => $data_type,
}});
# If the serial number is '!!no_connection!!', this might be an old PDU that only supports SNMP v1.
if ($scan_apc_pdu_serial_number eq "!!no_connection!!")
{
# Try SNMP v1
$anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version} = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"fences::fence_uuid::${fence_uuid}::snmp_version" => $anvil->data->{snmp}{community}{version},
}});
($scan_apc_pdu_serial_number, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu}{scan_apc_pdu_serial_number},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_serial_number => $scan_apc_pdu_serial_number,
data_type => $data_type,
}});
# If it's still '!!no_connection!!', something else is wrong. Is possible it's a new
# PDU with SNMP turned off, perhaps?
if ($scan_apc_pdu_serial_number eq "!!no_connection!!")
{
# No luck
$scan_apc_pdu_serial_number = "";
$anvil->data->{fences}{fence_uuid}{$fence_uuid}{connected} = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_serial_number => $scan_apc_pdu_serial_number,
"fences::fence_uuid::${fence_uuid}::connected" => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{connected},
}});
}
}
# If we didn't find the PDU using the fence_uuid, see if we can find it by the serial number.
if ($new_pdu)
{
if (($scan_apc_pdu_serial_number) && (exists $anvil->data->{sql}{serial_number_to_apc_pdu_uuid}{$scan_apc_pdu_serial_number}))
{
# It's new, generate the UUID now. We'll set 'scan_apc_pdu_new' so we know to INSERT
# it later.
$scan_apc_pdu_uuid = $anvil->data->{sql}{serial_number_to_apc_pdu_uuid}{$scan_apc_pdu_serial_number};
$new_pdu = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_uuid => $scan_apc_pdu_uuid,
new_pdu => $new_pdu,
}});
}
else
{
$scan_apc_pdu_uuid = $anvil->Get->uuid();
$new_pdu = 1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_uuid => $scan_apc_pdu_uuid,
new_pdu => $new_pdu,
}});
}
}
$anvil->data->{fences}{fence_uuid}{$fence_uuid}{scan_apc_pdu_uuid} = $scan_apc_pdu_uuid;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"fences::fence_uuid::${fence_uuid}::scan_apc_pdu_uuid" => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{scan_apc_pdu_uuid},
}});
# These are set to avoid 'undefined' variable warnings later if we fail to reach this PDU.
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{pdu_host_name} = $pdu_name;
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{new_pdu} = $new_pdu;
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_fence_uuid} = $fence_uuid;
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_serial_number} = $scan_apc_pdu_serial_number;
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_model_number} = "";
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_manufacture_date} = "";
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_firmware_version} = "";
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_hardware_version} = "";
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_ipv4_address} = $pdu_ip;
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address} = "";
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mtu_size} = "";
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_link_speed} = 0;
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_phase_count} = "";
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_outlet_count} = "";
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{uptime} = "";
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{total_wattage_draw} = "";
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{maximum} = "";
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{low_warning} = "";
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_warning} = "";
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_critical} = "";
# If I got the serial number, I found the PDU.
next if not $scan_apc_pdu_serial_number;
#############################################################################################
# Base PDU info #
#############################################################################################
### Get the base PDU info.
# Model Number
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_model_number}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu}{scan_apc_pdu_model_number},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_model_number" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_model_number},
data_type => $data_type,
}});
# Manufacture date
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_manufacture_date}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu}{scan_apc_pdu_manufacture_date},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_manufacture_date" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_manufacture_date},
data_type => $data_type,
}});
# Firmware version
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_firmware_version}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu}{scan_apc_pdu_firmware_version},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_firmware_version" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_firmware_version},
data_type => $data_type,
}});
# Hardware version
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_hardware_version}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu}{scan_apc_pdu_hardware_version},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_hardware_version" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_hardware_version},
data_type => $data_type,
}});
# MAC address. Note, this could use a couple different OIDs, depending on the version. It also requires the custom MIB
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu}{scan_apc_pdu_mac_address},
mib => $anvil->data->{'scan-apc-pdu'}{striker_mib},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_mac_address" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address},
data_type => $data_type,
}});
if ($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address} eq "#!no_value!#")
{
# Some older PDUs use a different OID.
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu}{scan_apc_pdu_mac_address_alt},
mib => $anvil->data->{'scan-apc-pdu'}{striker_mib},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_mac_address" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address},
data_type => $data_type,
}});
}
# Make the MAC address lower case and replace the spaces with colons
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address} = lc($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address});
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address} =~ s/^\s+//g;
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address} =~ s/\s+$//g;
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address} =~ s/ /:/g;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_mac_address" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address},
}});
# Read the MTU. This again could be at one of two OIDs.
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mtu_size}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu}{scan_apc_pdu_mtu_size},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_mtu_size" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mtu_size},
data_type => $data_type,
}});
if ($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mtu_size} eq "#!no_value!#")
{
# Some older PDUs use a different OID.
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mtu_size}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu}{scan_apc_pdu_mtu_size_alt},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_mtu_size" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mtu_size},
data_type => $data_type,
}});
}
# Read the link speed. Again, this could be at alternate OIDs.
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_link_speed}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu}{scan_apc_pdu_link_speed},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_link_speed" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_link_speed},
data_type => $data_type,
}});
if ($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_link_speed} eq "#!no_value!#")
{
# Some older PDUs use a different OID.
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_link_speed}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu}{scan_apc_pdu_link_speed_alt},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_link_speed" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_link_speed},
data_type => $data_type,
}});
}
# Read in the phase count
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_phase_count}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu}{scan_apc_pdu_phase_count},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_phase_count" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_phase_count},
data_type => $data_type,
}});
# Read in the outlet count
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_outlet_count}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu}{scan_apc_pdu_outlet_count},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_outlet_count" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_outlet_count},
data_type => $data_type,
}});
### These change often and will go into the 'variables' table
# Read the uptime
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{uptime}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu_variables}{uptime},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_variables::uptime" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{uptime},
data_type => $data_type,
}});
# Total watt draw
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{total_wattage_draw}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu_variables}{total_wattage_draw},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_variables::total_wattage_draw" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{total_wattage_draw},
data_type => $data_type,
}});
### These are used later for checking the state of the phases. They are not stored in the database.
# Macimum allowed amperage
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{maximum}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu_phases}{scan_apc_pdu_phase_max_amperage},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::amperage::maximum" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{maximum},
data_type => $data_type,
}});
# Low amperage on a phase threshold
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{low_warning}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu_phases}{phase_low_amp_warning},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::amperage::low_warning" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{low_warning},
data_type => $data_type,
}});
# High warning
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_warning}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu_phases}{phase_high_amp_warning},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::amperage::high_warning" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_warning},
data_type => $data_type,
}});
# Phase high amperage threshold
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_critical}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $anvil->data->{oids}{scan_apc_pdu_phases}{phase_high_amp_critical},
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::amperage::high_critical" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_critical},
data_type => $data_type,
}});
### Convert some unknown values to values we can store in the database
# MAC address
if ($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address} eq "#!no_value!#")
{
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address} = "xx:xx:xx:xx:xx:xx";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_mac_address" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mac_address},
}});
}
# MTU
if ($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mtu_size} eq "#!no_value!#")
{
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mtu_size} = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_mtu_size" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_mtu_size},
}});
}
# Link speed
if ($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_link_speed} eq "#!no_value!#")
{
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_link_speed} = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_link_speed" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_link_speed},
}});
}
# Wattage isn't available on older PDUs
if ($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{total_wattage_draw} eq "#!no_value!#")
{
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{total_wattage_draw} = 0;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_variables::total_wattage_draw" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{total_wattage_draw},
}});
}
### TODO: We should probably sanity check the various values. Error or set?
# If the (high critical amperage + 'scan-apc-pdu::critical_amps_below_max') > maximum
# amperage, we'll set the critical warning level to be
# (maximum - 'scan-apc-pdu::critical_amps_below_max')
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"scan-apc-pdu::critical_amps_below_max" => $anvil->data->{'scan-apc-pdu'}{critical_amps_below_max},
}});
if (($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_critical} + $anvil->data->{'scan-apc-pdu'}{critical_amps_below_max}) > $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{maximum})
{
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_critical} = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{maximum} - $anvil->data->{'scan-apc-pdu'}{critical_amps_below_max};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::amperage::high_critical" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_critical},
}});
}
# Make sure that the warning is at least 'scan-apc-pdu::warning_amps_below_critical'
if (($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_warning} + $anvil->data->{'scan-apc-pdu'}{warning_amps_below_critical}) > $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_critical})
{
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_warning} = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_critical} - $anvil->data->{'scan-apc-pdu'}{warning_amps_below_critical};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::amperage::high_warning" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_warning},
}});
}
# Set the alert clear levels
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{clear_high_critical} = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_critical} - $anvil->data->{'scan-apc-pdu'}{clear_alert_threshold};
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{clear_high_warning} = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{high_warning} - $anvil->data->{'scan-apc-pdu'}{clear_alert_threshold};
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{clear_low_warning} = $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{low_warning} + $anvil->data->{'scan-apc-pdu'}{clear_alert_threshold};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::amperage::clear_high_critical" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{clear_high_critical},
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::amperage::clear_high_warning" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{clear_high_warning},
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::amperage::clear_low_warning" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{amperage}{clear_low_warning},
}});
# Uptime is in ticks
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{uptime} /= $anvil->data->{'scan-apc-pdu'}{ticks_per_second};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu:${scan_apc_pdu_serial_number}::scan_apc_pdu_variables::uptime" => $anvil->Convert->add_commas({number => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{uptime}})." (".$anvil->Convert->time({'time' => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_variables}{uptime}, translate => 1}).")",
}});
# The dates are in 'mm/dd/yyyy' or 'mm/dd/yy' format, convert them to 'yyyy/mm/dd'
if ($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_manufacture_date} =~ /(\d\d)\/(\d\d)\/(\d\d\d\d)$/)
{
my $year = $3;
my $month = $1;
my $day = $2;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
year => $year,
month => $month,
day => $day,
}});
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_manufacture_date} = $year."/".$month."/".$day;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_manufacture_date" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_manufacture_date},
}});
}
elsif ($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_manufacture_date} =~ /(\d\d)\/(\d\d)\/(\d\d)$/)
{
my $year = $3;
my $month = $1;
my $day = $2;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"year" => $year,
"month" => $month,
"day" => $day,
}});
if ($year < 70)
{
$year += 2000;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"year" => $year,
}});
}
else
{
$year += 1900;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"year" => $year,
}});
}
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_manufacture_date} = $year."/".$month."/".$day;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu::scan_apc_pdu_manufacture_date" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_manufacture_date},
}});
}
# If an alert (cleared) message/log is needed for either phase or outlet count, they'll use this hash
my $variables = {
name => $pdu_name,
ip => $pdu_ip,
serial_number => $scan_apc_pdu_serial_number,
};
# Verify that the phase count is valid
my $bad_phase_count_key = "scan_apc_pdu::".$scan_apc_pdu_uuid."::bad_phase_count";
if ($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_phase_count} !~ /^\d+$/)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "scan_apc_pdu_message_0002", variables => $variables});
my $changed = $anvil->Alert->check_alert_sent({
debug => 3,
record_locator => $bad_phase_count_key,
set_by => $THIS_FILE,
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changed => $changed }});
if ($changed)
{
# Register an alert.
$anvil->Alert->register({alert_level => "warning", message => "scan_apc_pdu_message_0002", variables => $variables, set_by => $THIS_FILE});
}
$anvil->nice_exit({exit_code => 1});
}
else
{
# Clear the alert?
my $changed = $anvil->Alert->check_alert_sent({
debug => 3,
clear => 1,
record_locator => $bad_phase_count_key,
set_by => $THIS_FILE,
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changed => $changed }});
if ($changed)
{
# Register an alert.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "scan_apc_pdu_message_0003", variables => $variables});
$anvil->Alert->register({alert_level => "warning", clear_alert => 1, message => "scan_apc_pdu_message_0003", variables => $variables, set_by => $THIS_FILE});
}
}
# Now read the phase data
foreach my $scan_apc_pdu_phase_number (1..$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_phase_count})
{
# Stick the phase onto the end of the OID.
my $oid = $anvil->data->{oids}{scan_apc_pdu_phases}{scan_apc_pdu_phase_current_amperage}.$scan_apc_pdu_phase_number;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"scan_apc_pdu_phase_number" => $scan_apc_pdu_phase_number,
"oid" => $oid,
}});
# Read this phase's amperage
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_current_amperage}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $oid,
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_phases::${scan_apc_pdu_phase_number}::scan_apc_pdu_phase_current_amperage" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_current_amperage},
data_type => $data_type,
}});
# The amperage is in 1/10 amps, so divide by 10.
if ($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_current_amperage} =~ /^\d+$/)
{
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_current_amperage} /= 10;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_phases::${scan_apc_pdu_phase_number}::scan_apc_pdu_phase_current_amperage" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_phases}{$scan_apc_pdu_phase_number}{scan_apc_pdu_phase_current_amperage},
}});
}
}
# Read the outlet data, if the outlet count is sane.
my $bad_outlet_count_key = "scan_apc_pdu::".$scan_apc_pdu_uuid."::bad_outlet_count";
if ($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_outlet_count} !~ /^\d+$/)
{
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "scan_apc_pdu_message_0004", variables => $variables});
my $changed = $anvil->Alert->check_alert_sent({
debug => 3,
record_locator => $bad_outlet_count_key,
set_by => $THIS_FILE,
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changed => $changed }});
if ($changed)
{
# Register an alert.
$anvil->Alert->register({alert_level => "warning", message => "scan_apc_pdu_message_0004", variables => $variables, set_by => $THIS_FILE});
}
$anvil->nice_exit({exit_code => 1});
}
else
{
# Clear the alert?
my $changed = $anvil->Alert->check_alert_sent({
debug => 3,
clear => 1,
record_locator => $bad_outlet_count_key,
set_by => $THIS_FILE,
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { changed => $changed }});
if ($changed)
{
# Register an alert.
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, priority => "err", key => "scan_apc_pdu_message_0005", variables => $variables});
$anvil->Alert->register({alert_level => "warning", clear_alert => 1, message => "scan_apc_pdu_message_0005", variables => $variables, set_by => $THIS_FILE});
}
}
# Now read the outlet data
foreach my $scan_apc_pdu_outlet_number (1..$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu}{scan_apc_pdu_outlet_count})
{
# Stick the outlet onto the end of the OIDs.
my $outlet_name_oid = $anvil->data->{oids}{scan_apc_pdu_outlets}{scan_apc_pdu_outlet_name}.$scan_apc_pdu_outlet_number;
my $outlet_phase_oid = $anvil->data->{oids}{scan_apc_pdu_outlets}{scan_apc_pdu_outlet_on_phase}.$scan_apc_pdu_outlet_number;
my $outlet_state_oid = $anvil->data->{oids}{scan_apc_pdu_outlets}{scan_apc_pdu_outlet_state}.$scan_apc_pdu_outlet_number;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"outlet_name_oid" => $outlet_name_oid,
"outlet_phase_oid" => $outlet_phase_oid,
"outlet_state_oid" => $outlet_state_oid,
}});
### Read the OID
# outlet name
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_name}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $outlet_name_oid,
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_outlets::${scan_apc_pdu_outlet_number}::scan_apc_pdu_outlet_name" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_name},
data_type => $data_type,
}});
# Outlet number on phase
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_on_phase}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $outlet_phase_oid,
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_outlets::${scan_apc_pdu_outlet_number}::scan_apc_pdu_outlet_on_phase" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_on_phase},
data_type => $data_type,
}});
# State of the outlet
($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state}, $data_type) = $anvil->Remote->read_snmp_oid({
debug => 3,
target => $pdu_ip,
oid => $outlet_state_oid,
version => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{snmp_version},
community => $anvil->data->{snmp}{community}{'read'}
});
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_outlets::${scan_apc_pdu_outlet_number}::scan_apc_pdu_outlet_state" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state},
data_type => $data_type,
}});
# The state is; 1 = on, 2 = off, 4 = unknown
if ($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state} eq "1")
{
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state} = "on";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_outlets::${scan_apc_pdu_outlet_number}::scan_apc_pdu_outlet_state" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state},
}});
}
elsif ($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state} eq "2")
{
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state} = "off";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_outlets::${scan_apc_pdu_outlet_number}::scan_apc_pdu_outlet_state" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state},
}});
}
elsif ($anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state} eq "3")
{
$anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state} = "unknown";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"pdu::scan_apc_pdu_uuid::${scan_apc_pdu_uuid}::scan_apc_pdu_outlets::${scan_apc_pdu_outlet_number}::scan_apc_pdu_outlet_state" => $anvil->data->{pdu}{scan_apc_pdu_uuid}{$scan_apc_pdu_uuid}{scan_apc_pdu_outlets}{$scan_apc_pdu_outlet_number}{scan_apc_pdu_outlet_state},
}});
}
}
}
return(0);
}
# This looks for APC PDUs.
sub find_pdus
{
my ($anvil) = @_;
# Search in 'fences' for agents starting with 'fence_apc_'. These aren't bound to hosts (or even
# Anvil! systems), so not all may be available.
my $query = "
SELECT
fence_uuid,
fence_name,
fence_arguments
FROM
fences
WHERE
fence_agent LIKE 'fence_apc_%'
AND
fence_arguments != 'DELETED'
ORDER BY
fence_name ASC
;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
my $results = $anvil->Database->query({query => $query, source => $THIS_FILE, line => __LINE__});
my $count = @{$results};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => {
results => $results,
count => $count,
}});
foreach my $row (@{$results})
{
my $fence_uuid = $row->[0];
my $fence_name = $row->[1];
my $fence_arguments = $row->[2];
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => {
fence_uuid => $fence_uuid,
fence_name => $fence_name,
fence_arguments => $fence_arguments,
}});
if ($fence_arguments =~ /ip=\"(.*?)\"/)
{
my $ip_address = $1;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => { ip_address => $ip_address }});
$anvil->data->{fences}{fence_uuid}{$fence_uuid}{name} = $fence_name;
$anvil->data->{fences}{fence_uuid}{$fence_uuid}{ip_address} = $ip_address;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
"fences::fence_uuid::${fence_uuid}::name" => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{name},
"fences::fence_uuid::${fence_uuid}::ip_address" => $anvil->data->{fences}{fence_uuid}{$fence_uuid}{ip_address},
}});
# If there are two or more entries in scan_apc_pdu for this fence UUID, remove the extras.
my $query = "
SELECT
scan_apc_pdu_uuid,
scan_apc_pdu_model_number
FROM
scan_apc_pdus
WHERE
scan_apc_pdu_fence_uuid = ".$anvil->Database->quote($fence_uuid)."
;";
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }});
my $results = $anvil->Database->query({query => $query, source => $THIS_FILE, line => __LINE__});
my $count = @{$results};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => {
results => $results,
count => $count,
}});
if ($count > 1)
{
# Duplicate! Is one of them marked as DELETED?
foreach my $row (@{$results})
{
# Is this one deleted?
my $scan_apc_pdu_uuid = $row->[0];
my $scan_apc_pdu_model_number = $row->[1];
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => {
scan_apc_pdu_uuid => $scan_apc_pdu_uuid,
scan_apc_pdu_model_number => $scan_apc_pdu_model_number,
}});
if ($scan_apc_pdu_model_number eq "DELETED")
{
# Take this one out.
my $variables = {
name => $fence_name,
uuid => $scan_apc_pdu_uuid,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_log_0002", variables => $variables});
$anvil->Alert->register({
alert_level => "notice",
message => "scan_apc_pdu_log_0002",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
delete_pdu($anvil, $scan_apc_pdu_uuid);
$count--;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { count => $count }});
}
last if $count == 1;
}
# If count is still > 1, we need to arbitrarily delete an interface.
if ($count > 1)
{
foreach my $row (@{$results})
{
# Is this one deleted?
my $scan_apc_pdu_uuid = $row->[0];
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { scan_apc_pdu_uuid => $scan_apc_pdu_uuid }});
my $variables = {
name => $fence_name,
uuid => $scan_apc_pdu_uuid,
};
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "scan_apc_pdu_log_0002", variables => $variables});
$anvil->Alert->register({
alert_level => "notice",
message => "scan_apc_pdu_log_0002",
variables => $variables,
set_by => $THIS_FILE,
sort_position => $anvil->data->{'scan-apc-pdu'}{alert_sort}++,
});
delete_pdu($anvil, $scan_apc_pdu_uuid);
$count--;
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { count => $count }});
}
last if $count == 1;
}
}
}
}
my $pdu_count = keys %{$anvil->data->{fences}{fence_uuid}};
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => { pdu_count => $pdu_count }});
return($pdu_count);
}
sub delete_pdu
{
my ($anvil, $scan_apc_pdu_uuid) = @_;
my $queries = [
"DELETE FROM scan_apc_pdu_variables WHERE scan_apc_pdu_variable_scan_apc_pdu_uuid = ".$anvil->Database->quote($scan_apc_pdu_uuid).";",
"DELETE FROM scan_apc_pdu_phases WHERE scan_apc_pdu_phase_scan_apc_pdu_uuid = ".$anvil->Database->quote($scan_apc_pdu_uuid).";",
"DELETE FROM scan_apc_pdu_outlets WHERE scan_apc_pdu_outlet_scan_apc_pdu_uuid = ".$anvil->Database->quote($scan_apc_pdu_uuid).";",
"DELETE FROM scan_apc_pdus WHERE scan_apc_pdu_uuid = ".$anvil->Database->quote($scan_apc_pdu_uuid).";"
];
$anvil->Database->write({query => $queries, source => $THIS_FILE, line => __LINE__});
return(0);
}