You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
686 lines
28 KiB
686 lines
28 KiB
#!/usr/bin/perl |
|
# |
|
# This is called when striker needs to configure the local network and user accounts. |
|
# |
|
# Exit codes; |
|
# 0 = Normal exit. |
|
# 1 = The program is not running as root. |
|
# 2 = Failed to connect to database(s). |
|
# 3 = Job was already picked up by another running instance. |
|
# 4 = The host name did not update properly. |
|
# 5 = Failed to write the temp file with the new password needed to call anvil-change-password. |
|
# |
|
|
|
use strict; |
|
use warnings; |
|
use Data::Dumper; |
|
use Anvil::Tools; |
|
|
|
my $THIS_FILE = ($0 =~ /^.*\/(.*)$/)[0]; |
|
my $running_directory = ($0 =~ /^(.*?)\/$THIS_FILE$/)[0]; |
|
if (($running_directory =~ /^\./) && ($ENV{PWD})) |
|
{ |
|
$running_directory =~ s/^\./$ENV{PWD}/; |
|
} |
|
|
|
# Turn off buffering so that the pinwheel will display while waiting for the SSH call(s) to complete. |
|
$| = 1; |
|
|
|
my $anvil = Anvil::Tools->new(); |
|
$anvil->Log->level({set => 2}); |
|
$anvil->Log->secure({set => 1}); |
|
|
|
# Read switches |
|
$anvil->Get->switches; |
|
|
|
# Paths |
|
$anvil->Storage->read_config({file => $anvil->data->{path}{configs}{'anvil.conf'}}); |
|
|
|
# Make sure we're running as 'root' |
|
# $< == real UID, $> == effective UID |
|
if (($< != 0) && ($> != 0)) |
|
{ |
|
# Not root |
|
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, key => "error_0005"}); |
|
$anvil->nice_exit({code => 1}); |
|
} |
|
|
|
# Connect |
|
my $connections = $anvil->Database->connect({ |
|
sql_file => $anvil->data->{sys}{database}{schema}, |
|
test_table => "network_interfaces", |
|
}); |
|
|
|
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "message_0031"}); |
|
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 3, key => "log_0132", variables => { connections => $connections }}); |
|
if (not $connections) |
|
{ |
|
# No databases, exit. |
|
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, key => "error_0003"}); |
|
$anvil->nice_exit({exit_code => 2}); |
|
} |
|
|
|
pickup_job_details($anvil); |
|
|
|
reconfigure_network($anvil); |
|
|
|
update_passwords($anvil); |
|
|
|
|
|
|
|
### TODO: This is only until we can get the damn networking stable on reconfigure. |
|
# Reboot. |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{'shutdown'}." --reboot now"}); |
|
|
|
$anvil->nice_exit({code => 0}); |
|
|
|
############################################################################################################# |
|
# Functions # |
|
############################################################################################################# |
|
|
|
# This updates the passwords on the root user, admin user, database and apache user. |
|
sub update_passwords |
|
{ |
|
my ($anvil) = @_; |
|
|
|
# Set the passwords |
|
my $password = $anvil->data->{variables}{form}{config_step2}{striker_password}{value}; |
|
my $temp_file = "/tmp/anvil-".$anvil->Get->uuid; |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, secure => 1, list => { password => $password }}); |
|
|
|
# Write the password into a temporary file. |
|
my $error = $anvil->Storage->write_file({ |
|
body => $password, |
|
debug => 2, |
|
file => $temp_file, |
|
group => "root", |
|
mode => "0600", |
|
overwrite => 1, |
|
secure => 1, |
|
user => "root", |
|
}); |
|
|
|
# Call anvil-change-password |
|
if ($error) |
|
{ |
|
# Couldn't write the temp file. |
|
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, key => "message_0030", variables => { file => $temp_file }}); |
|
$anvil->nice_exit({code => 5}); |
|
} |
|
else |
|
{ |
|
my $return_code = ""; |
|
my $output = $anvil->System->call({ |
|
debug => 2, |
|
shell_call => $anvil->data->{path}{exe}{'anvil-change-password'}." -y --password-file ".$temp_file."; ".$anvil->data->{path}{exe}{'echo'}." return_code:\$!", |
|
}); |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, secure => 0, list => { output => $output }}); |
|
foreach my $line (split/\n/, $output) |
|
{ |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, secure => 0, list => { line => $line }}); |
|
if ($line =~ /return_code:(\d+)$/) |
|
{ |
|
$return_code = $1; |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, secure => 0, list => { return_code => $return_code }}); |
|
} |
|
} |
|
|
|
# Unlink the temp file. |
|
unlink $temp_file; |
|
|
|
if ($return_code) |
|
{ |
|
# Something went wrong |
|
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, key => "error_0011", variables => { return_code => $return_code }}); |
|
} |
|
} |
|
|
|
return(0); |
|
} |
|
|
|
# This does the work of reconfiguring the network |
|
sub reconfigure_network |
|
{ |
|
my ($anvil) = @_; |
|
|
|
my $prefix = $anvil->data->{variables}{form}{config_step1}{prefix}{value}; |
|
my $sequence = $anvil->data->{variables}{form}{config_step1}{sequence}{value}; |
|
my $domain = $anvil->data->{variables}{form}{config_step1}{domain}{value}; |
|
my $organization = $anvil->data->{variables}{form}{config_step1}{organization}{value}; |
|
my $bcn_count = 1; # TODO: This should be coming from the form, even though it's only '1' for now. |
|
my $sn_count = 0; # TODO: This should be coming from the form, even though it's always '0' for Strikers. |
|
my $ifn_count = $anvil->data->{variables}{form}{config_step1}{ifn_count}{value}; |
|
my $new_hostname = defined $anvil->data->{variables}{form}{config_step2}{hostname}{value} ? $anvil->data->{variables}{form}{config_step2}{hostname}{value} : $prefix."-striker".sprintf("%02d", $sequence).".".$domain; |
|
my $pretty_hostname = $organization." - Striker ".sprintf("%02d", $sequence); |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, secure => 0, list => { |
|
prefix => $prefix, |
|
sequence => $sequence, |
|
domain => $domain, |
|
organization => $organization, |
|
bcn_count => $bcn_count, |
|
ifn_count => $ifn_count, |
|
new_hostname => $new_hostname, |
|
pretty_hostname => $pretty_hostname, |
|
}}); |
|
|
|
# Set the hostname |
|
my $hostname = $anvil->System->hostname({set => $new_hostname, pretty => $pretty_hostname, debug => 2}); |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { hostname => $hostname }}); |
|
if ($hostname eq $new_hostname) |
|
{ |
|
# Success |
|
$anvil->data->{job}{status} .= "message_0016,!!hostname!$new_hostname!!\n"; |
|
$anvil->Database->insert_or_update_jobs({ |
|
job_uuid => $anvil->data->{job}{uuid}, |
|
update_progress_only => 1, |
|
job_progress => 10, |
|
job_status => $anvil->data->{job}{status}, |
|
}); |
|
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "message_0016", variables => { hostname => $new_hostname }}); |
|
} |
|
else |
|
{ |
|
# Failed |
|
$anvil->data->{job}{status} .= "message_0017,!!hostname!$new_hostname!!,!!bad_hostname!$hostname!!\n"; |
|
$anvil->data->{job}{status} .= "failed\n"; |
|
$anvil->Database->insert_or_update_jobs({ |
|
job_uuid => $anvil->data->{job}{uuid}, |
|
update_progress_only => 1, |
|
job_progress => 100, |
|
job_status => $anvil->data->{job}{status}, |
|
}); |
|
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, key => "message_0017", variables => { |
|
hostname => $new_hostname, |
|
bad_hostname => $hostname, |
|
}}); |
|
$anvil->nice_exit({code => 4}); |
|
} |
|
|
|
# Get the current list of IPs and MAC addresses. |
|
$anvil->System->get_ips(); |
|
|
|
# Now configure the network. |
|
my $dns = defined $anvil->data->{variables}{form}{config_step2}{dns}{value} ? [split/,/, $anvil->data->{variables}{form}{config_step2}{dns}{value}] : []; |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => { dns => $dns }}); |
|
for (my $i = 0; $i < @{$dns}; $i++) |
|
{ |
|
$dns->[$i] = $anvil->Words->clean_spaces({ string => $dns->[$i] }); |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => { "dns->[$i]" => $dns->[$i] }}); |
|
} |
|
|
|
my $gateway = defined $anvil->data->{variables}{form}{config_step2}{gateway}{value} ? $anvil->data->{variables}{form}{config_step2}{gateway}{value} : ""; |
|
my $gateway_interface = defined $anvil->data->{variables}{form}{config_step2}{gateway_interface}{value} ? $anvil->data->{variables}{form}{config_step2}{gateway_interface}{value} : ""; |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { |
|
gateway => $gateway, |
|
gateway_interface => $gateway_interface, |
|
}}); |
|
foreach my $network_type ("bcn", "sn", "ifn") |
|
{ |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { network_type => $network_type }}); |
|
|
|
my $count = 0; |
|
if ($network_type eq "bcn") { $count = $bcn_count; } |
|
elsif ($network_type eq "sn") { $count = $sn_count; } |
|
elsif ($network_type eq "ifn") { $count = $ifn_count; } |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { count => $count }}); |
|
|
|
next if not $count; |
|
foreach my $network_count (1..$count) |
|
{ |
|
my $this_network = $network_type.$network_count; |
|
my $link1_key = $this_network."_iface1_mac"; |
|
my $link2_key = $this_network."_iface2_mac"; |
|
my $subnet_key = $this_network."_subnet"; |
|
my $ip_key = $this_network."_ip"; |
|
my $is_gateway = $this_network eq $gateway_interface ? 1 : 0; |
|
my $link1_mac = $anvil->data->{variables}{form}{config_step2}{$link1_key}{value}; |
|
my $link2_mac = $anvil->data->{variables}{form}{config_step2}{$link2_key}{value}; |
|
my $old_link1_iface = $anvil->data->{sys}{mac}{$link1_mac}{iface} ? $anvil->data->{sys}{mac}{$link1_mac}{iface} : ""; |
|
my $old_link2_iface = $anvil->data->{sys}{mac}{$link2_mac}{iface} ? $anvil->data->{sys}{mac}{$link2_mac}{iface} : ""; |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { |
|
ip_key => $ip_key, |
|
is_gateway => $is_gateway, |
|
link1_key => $link1_key, |
|
link1_mac => $link1_mac, |
|
link2_key => $link2_key, |
|
link2_mac => $link2_mac, |
|
old_link1_iface => $old_link1_iface, |
|
old_link2_iface => $old_link2_iface, |
|
subnet_key => $subnet_key, |
|
this_network => $this_network, |
|
}}); |
|
|
|
# Skip if this doesn't exist or isn't a valid IPv4 address. |
|
next if not exists $anvil->data->{variables}{form}{config_step2}{$ip_key}{value}; |
|
if (($anvil->data->{variables}{form}{config_step2}{$ip_key}{value}) and (not $anvil->Validate->is_ipv4({ip => $anvil->data->{variables}{form}{config_step2}{$ip_key}{value}}))) |
|
{ |
|
# Something was set, but it isn't valid. |
|
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, key => "log_0148", variables => { |
|
network => $this_network, |
|
ip => $anvil->data->{variables}{form}{config_step2}{$ip_key}{value}, |
|
}}); |
|
next; |
|
} |
|
|
|
my $ip = $anvil->data->{variables}{form}{config_step2}{$ip_key}{value}; |
|
my $subnet = $anvil->data->{variables}{form}{config_step2}{$subnet_key}{value}; |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { |
|
ip => $ip, |
|
subnet => $subnet, |
|
}}); |
|
|
|
if ($anvil->Validate->is_mac({mac => $link2_mac})) |
|
{ |
|
### TODO: Handle when bridges exist. Detect when the host is a node and/or have a "use as bridge" option? |
|
# Bonded; Build the configs. |
|
my $say_network = ""; |
|
my $say_interface = ""; |
|
my $interface_prefix = ""; |
|
if ($network_type eq "bcn") |
|
{ |
|
$say_network = "Back-Channel Network ".$network_count; |
|
$say_interface = "bcn".$network_count; |
|
$interface_prefix = "BCN"; |
|
} |
|
elsif ($network_type eq "sn") |
|
{ |
|
$say_network = "Storage Network ".$network_count; |
|
$say_interface = "sn".$network_count; |
|
$interface_prefix = "SN"; |
|
} |
|
elsif ($network_type eq "ifn") |
|
{ |
|
$say_network = "Internet-Facing Network ".$network_count; |
|
$say_interface = "ifn".$network_count; |
|
$interface_prefix = "IFN"; |
|
} |
|
my $say_defroute = $is_gateway ? "yes" : "no"; |
|
my $cidr = $anvil->Convert->cidr({subnet => $subnet}); |
|
my $bond_file = $anvil->data->{path}{directories}{ifcfg}."/ifcfg-".$interface_prefix."_".$network_count."_-_Bond_1"; |
|
my $new_link1_file = $anvil->data->{path}{directories}{ifcfg}."/ifcfg-".$interface_prefix."_".$network_count."_-_Link_1"; |
|
my $new_link2_file = $anvil->data->{path}{directories}{ifcfg}."/ifcfg-".$interface_prefix."_".$network_count."_-_Link_2"; |
|
my $old_link1_file = $new_link1_file; |
|
my $old_link2_file = $new_link2_file; |
|
my $new_bond_iface = $say_interface."_bond1"; |
|
my $new_link1_iface = $say_interface."_link1"; |
|
my $new_link2_iface = $say_interface."_link2"; |
|
if ((exists $anvil->data->{sys}{mac}{$link1_mac}{iface}) && ($anvil->data->{sys}{mac}{$link1_mac}{iface})) |
|
{ |
|
$old_link1_file = $anvil->data->{path}{directories}{ifcfg}."/ifcfg-".$anvil->data->{sys}{mac}{$link1_mac}{iface}; |
|
} |
|
if ((exists $anvil->data->{sys}{mac}{$link2_mac}{iface}) && ($anvil->data->{sys}{mac}{$link2_mac}{iface})) |
|
{ |
|
$old_link2_file = $anvil->data->{path}{directories}{ifcfg}."/ifcfg-".$anvil->data->{sys}{mac}{$link2_mac}{iface}; |
|
} |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { |
|
say_defroute => $say_defroute, |
|
cidr => $cidr, |
|
bond_file => $bond_file, |
|
new_link1_file => $new_link1_file, |
|
new_link2_file => $new_link2_file, |
|
old_link1_file => $old_link1_file, |
|
old_link2_file => $old_link2_file, |
|
new_bond_iface => $new_bond_iface, |
|
new_link1_iface => $new_link1_iface, |
|
new_link2_iface => $new_link2_iface, |
|
}}); |
|
|
|
# Gather (or create) UUIDs |
|
my $bond_uuid = get_uuid_from_interface_file($anvil, $bond_file); |
|
my $link1_uuid = get_uuid_from_interface_file($anvil, $old_link1_file); |
|
my $link2_uuid = get_uuid_from_interface_file($anvil, $old_link2_file); |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { |
|
bond_uuid => $bond_uuid, |
|
link1_uuid => $link1_uuid, |
|
link2_uuid => $link2_uuid, |
|
}}); |
|
|
|
### TODO: Set the firewall Zone appropriately. |
|
# Build the Bond config. |
|
my $bond_config = "# $say_network - Bond 1\n"; |
|
$bond_config .= "UUID=\"".$bond_uuid."\"\n"; |
|
$bond_config .= "NAME=\"".$interface_prefix." ".$network_count." - Bond 1\"\n"; |
|
$bond_config .= "DEVICE=\"".$new_bond_iface."\"\n"; |
|
$bond_config .= "BONDING_OPTS=\"mode=active-backup primary=".$say_interface."_link1 updelay=120000 downdelay=0 miimon=100 primary_reselect=better\"\n"; |
|
$bond_config .= "TYPE=\"Bond\"\n"; |
|
$bond_config .= "BONDING_MASTER=\"yes\"\n"; |
|
$bond_config .= "BOOTPROTO=\"none\"\n"; |
|
$bond_config .= "IPV6INIT=\"no\"\n"; |
|
$bond_config .= "ONBOOT=\"yes\"\n"; |
|
$bond_config .= "IPADDR=\"".$ip."\"\n"; |
|
$bond_config .= $cidr ? "PREFIX=\"".$cidr."\"\n" : "NETMASK=\"".$subnet."\"\n"; |
|
if ($is_gateway) |
|
{ |
|
$bond_config .= "GATEWAY=\"".$gateway."\"\n"; |
|
for (my $i = 0; $i < @{$dns}; $i++) |
|
{ |
|
$bond_config .= "DNS".($i+1)."=\"".$dns->[$i]."\"\n"; |
|
} |
|
} |
|
$bond_config .= "DEFROUTE=\"".$say_defroute."\"\n"; |
|
$bond_config .= "ZONE=\"".$say_interface."\""; |
|
|
|
my $link1_config = "# $say_network - Link 1\n"; |
|
$link1_config .= "HWADDR=\"".uc($link1_mac)."\"\n"; |
|
$link1_config .= "UUID=\"".$link1_uuid."\"\n"; |
|
$link1_config .= "NAME=\"".$interface_prefix." ".$network_count." - Link 1\"\n"; |
|
$link1_config .= "DEVICE=\"".$new_link1_iface."\"\n"; |
|
$link1_config .= "TYPE=\"Ethernet\"\n"; |
|
$link1_config .= "BOOTPROTO=\"none\"\n"; |
|
$link1_config .= "IPV6INIT=\"no\"\n"; |
|
$link1_config .= "ONBOOT=\"yes\"\n"; |
|
$link1_config .= "USERCTL=\"no\"\n"; |
|
$link1_config .= "MTU=\"1500\"\n"; # TODO: Make the MTU user-adjustable |
|
$link1_config .= "NM_CONTROLLED=\"yes\"\n"; |
|
$link1_config .= "SLAVE=\"yes\"\n"; |
|
$link1_config .= "MASTER=\"".$say_interface."_bond1\"\n"; |
|
$link1_config .= "ZONE=\"".$say_interface."\""; |
|
|
|
my $link2_config = "# $say_network - Link 2\n"; |
|
$link2_config .= "HWADDR=\"".uc($link2_mac)."\"\n"; |
|
$link2_config .= "UUID=\"".$link2_uuid."\"\n"; |
|
$link2_config .= "NAME=\"".$interface_prefix." ".$network_count." - Link 2\"\n"; |
|
$link2_config .= "DEVICE=\"".$new_link2_iface."\"\n"; |
|
$link2_config .= "TYPE=\"Ethernet\"\n"; |
|
$link2_config .= "BOOTPROTO=\"none\"\n"; |
|
$link2_config .= "IPV6INIT=\"no\"\n"; |
|
$link2_config .= "ONBOOT=\"yes\"\n"; |
|
$link2_config .= "USERCTL=\"no\"\n"; |
|
$link2_config .= "MTU=\"1500\"\n"; # TODO: Make the MTU user-adjustable |
|
$link2_config .= "NM_CONTROLLED=\"yes\"\n"; |
|
$link2_config .= "SLAVE=\"yes\"\n"; |
|
$link2_config .= "MASTER=\"".$say_interface."_bond1\"\n"; |
|
$link2_config .= "ZONE=\"".$say_interface."\""; |
|
|
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { |
|
bond_config => $bond_config, |
|
link1_config => $link1_config, |
|
link2_config => $link2_config, |
|
}}); |
|
|
|
# Make backups of existing files |
|
if (-e $bond_file) |
|
{ |
|
$anvil->Storage->backup({debug => 2, file => $bond_file}); |
|
} |
|
if (-e $old_link1_file) |
|
{ |
|
$anvil->Storage->backup({debug => 2, file => $old_link1_file}); |
|
} |
|
if (-e $old_link2_file) |
|
{ |
|
$anvil->Storage->backup({debug => 2, file => $old_link2_file}); |
|
} |
|
if (($old_link1_file ne $new_link1_file) && (-e $new_link1_file)) |
|
{ |
|
$anvil->Storage->backup({debug => 2, file => $new_link1_file}); |
|
} |
|
if (($old_link2_file ne $new_link2_file) && (-e $new_link2_file)) |
|
{ |
|
$anvil->Storage->backup({debug => 2, file => $new_link2_file}); |
|
} |
|
|
|
### Write out the new configs |
|
# Bond, Link 1 and Link 2 |
|
$anvil->Storage->write_file({file => $bond_file, body => $bond_config, user => "root", group => "root", mode => "0644", overwrite => 1}); |
|
$anvil->Storage->write_file({file => $new_link1_file, body => $link1_config, user => "root", group => "root", mode => "0644", overwrite => 1}); |
|
$anvil->Storage->write_file({file => $new_link2_file, body => $link2_config, user => "root", group => "root", mode => "0644", overwrite => 1}); |
|
|
|
### NOTE: Everything except the unlink is disabled until we sort out the reload |
|
# Shut down (and rename) Link 1 |
|
if ($old_link1_iface) |
|
{ |
|
# Take down and rename the old link 1 interface |
|
#print "Downing: ..... [$old_link1_iface]\n"; |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{ifdown}." ".$old_link1_iface}); |
|
#print "Disconnecting: [$old_link1_iface]\n"; |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{ip}." link set ".$old_link1_iface." down"}); |
|
} |
|
if ($old_link1_iface ne $new_link1_iface) |
|
{ |
|
# Rename it |
|
#print "Renaming: .... [$old_link1_iface] -> [$new_link1_iface]\n"; |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{ip}." link set ".$old_link1_iface." name ".$new_link1_iface}); |
|
|
|
# Unllnk the old one, if it exists. |
|
if (-e $old_link1_file) |
|
{ |
|
#print "Deleting: .... [$old_link1_file]\n"; |
|
unlink $old_link1_file; |
|
} |
|
} |
|
# Drop the new link, too, in case it still has the old config |
|
#print "Downing: ..... [$new_link1_iface]\n"; |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{ifdown}." ".$new_link1_iface}); |
|
|
|
# Shut down (and rename) Link 2 |
|
if ($old_link2_iface) |
|
{ |
|
# Take down and rename the old link 1 interface |
|
#print "Downing: ..... [$old_link2_iface]\n"; |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{ifdown}." ".$old_link2_iface}); |
|
#print "Disconnecting: [$old_link2_iface]\n"; |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{ip}." link set ".$old_link2_iface." down"}); |
|
} |
|
if ($old_link2_iface ne $new_link2_iface) |
|
{ |
|
# Rename it |
|
#print "Renaming ..... [$old_link2_iface] -> [$new_link2_iface]\n"; |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{ip}." link set ".$old_link2_iface." name ".$new_link2_iface}); |
|
} |
|
# Drop the new link, too, in case it still has the old config |
|
#print "Downing: ..... [$new_link2_iface]\n"; |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{ifdown}." ".$new_link2_iface}); |
|
|
|
# Start the bond. |
|
#print "Uping: ....... [$new_bond_iface]\n"; |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{ifup}." ".$new_bond_iface}); |
|
|
|
# Reconnect and up link 1 |
|
#print "Uping: ....... [$new_link1_iface]\n"; |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{ifup}." ".$new_link1_iface}); |
|
#print "Reconnecting: [$new_link1_iface]\n"; |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{ip}." link set ".$new_link1_iface." up"}); |
|
|
|
# Reconnect and up link 2 |
|
#print "Uping: ....... [$new_link2_iface]\n"; |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{ifup}." ".$new_link2_iface}); |
|
#print "Reconnecting: [$new_link2_iface]\n"; |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{ip}." link set ".$new_link2_iface." up"}); |
|
|
|
# Connect the bond (in case it isn't already)r |
|
#print "Connecting: .. [$new_bond_iface]\n"; |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{ip}." link set ".$new_bond_iface." up"}); |
|
} |
|
elsif ((exists $anvil->data->{variables}{form}{config_step2}{$link1_key}{value}) && ($anvil->Validate->is_mac({mac => $anvil->data->{variables}{form}{config_step2}{$link1_key}{value}}))) |
|
{ |
|
# Single interface |
|
my $link1_mac = $anvil->data->{variables}{form}{config_step2}{$link1_key}{value}; |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { link1_mac => $link1_mac }}); |
|
} |
|
else |
|
{ |
|
# Doesn't exist, skip. |
|
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 0, key => "log_0149", variables => { network => $this_network }}); |
|
next; |
|
} |
|
} |
|
} |
|
|
|
### TODO: This isn't working... The route table won't set the IFN as the default route properly and |
|
### the IFN links seem to drop out and not return when trying to fix it. For now, we'll do a |
|
### closing reboot which seems to always comes up OK. |
|
# Reload the network |
|
#print "reloading nmcli\n"; |
|
#$anvil->System->call({shell_call => $anvil->data->{path}{exe}{nmcli}." connection reload"}); |
|
|
|
return(0); |
|
} |
|
|
|
# This will read a network interface file and return the UUID="x" value. If the file doesn't exist or the |
|
# UUID was not found, a new UUID is generated and returned. |
|
sub get_uuid_from_interface_file |
|
{ |
|
my ($anvil, $file) = @_; |
|
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 2, key => "log_0131", variables => { function => "get_uuid_from_interface_file" }}); |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { file => $file }}); |
|
|
|
my $uuid = ""; |
|
if (-e $file) |
|
{ |
|
my $body = $anvil->Storage->read_file({file => $file}); |
|
foreach my $line (split/\n/, $body) |
|
{ |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { line => $line }}); |
|
$line =~ s/#.*//; |
|
if ($line =~ /UUID=\"(.*?)\"/) |
|
{ |
|
my $test_uuid = $1; |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { test_uuid => $test_uuid }}); |
|
if ($anvil->Validate->is_uuid({uuid => $test_uuid})) |
|
{ |
|
$uuid = $test_uuid; |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { uuid => $uuid }}); |
|
} |
|
last; |
|
} |
|
} |
|
} |
|
if (not $uuid) |
|
{ |
|
$uuid = $anvil->Get->uuid(); |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { uuid => $uuid }}); |
|
} |
|
|
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => { uuid => $uuid }}); |
|
return($uuid); |
|
} |
|
|
|
# This will pick up the job, or exit. |
|
sub pickup_job_details |
|
{ |
|
my ($anvil) = @_; |
|
|
|
# If any job said it was picked up, and the "job_picked_up_by" PID doesn't exist, take it and update |
|
# it. |
|
|
|
my $query = " |
|
SELECT |
|
job_uuid, |
|
job_command, |
|
job_data, |
|
job_picked_up_by, |
|
job_picked_up_at, |
|
job_updated, |
|
job_progress |
|
FROM |
|
jobs |
|
WHERE |
|
job_name = 'configure::network' |
|
AND |
|
job_progress != 100 |
|
AND |
|
job_host_uuid = ".$anvil->data->{sys}{use_db_fh}->quote($anvil->Get->host_uuid)." |
|
LIMIT 1;"; |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }}); |
|
|
|
my $results = $anvil->Database->query({query => $query, source => $THIS_FILE, line => __LINE__}); |
|
my $count = @{$results}; |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { |
|
results => $results, |
|
count => $count, |
|
}}); |
|
my $job_uuid = $results->[0]->[0]; |
|
my $job_command = $results->[0]->[1]; |
|
my $job_data = defined $results->[0]->[2] ? $results->[0]->[2] : ""; |
|
my $job_picked_up_by = $results->[0]->[3]; |
|
my $job_picked_up_at = $results->[0]->[4]; |
|
my $job_updated = $results->[0]->[5]; |
|
my $job_progress = $results->[0]->[6]; |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { |
|
job_uuid => $job_uuid, |
|
job_command => $job_command, |
|
job_data => $job_data, |
|
job_picked_up_by => $job_picked_up_by, |
|
job_picked_up_at => $job_picked_up_at, |
|
job_updated => $job_updated, |
|
job_progress => $job_progress, |
|
}}); |
|
|
|
# See if the job was picked up by another running instance. |
|
if ($job_picked_up_by) |
|
{ |
|
# Check if the PID is still active. |
|
$anvil->System->pids({ignore_me => 1}); |
|
|
|
# Is the PID that picked up the job still alive? |
|
if (exists $anvil->data->{pids}{$job_picked_up_by}) |
|
{ |
|
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0146", variables => { pid => $job_picked_up_by }}); |
|
$anvil->nice_exit({code => 3}); |
|
} |
|
else |
|
{ |
|
# The previous job is gone, we'll take this over. |
|
$anvil->Log->entry({source => $THIS_FILE, line => __LINE__, level => 1, key => "log_0147", variables => { |
|
pid => $job_picked_up_by, |
|
percent => $job_progress, |
|
}}); |
|
} |
|
} |
|
|
|
# This will store the variables from the database |
|
$anvil->data->{variables} = {}; |
|
|
|
# If we're still alive, pick up the details. |
|
$results = ""; |
|
$count = ""; |
|
$query = " |
|
SELECT |
|
variable_name, |
|
variable_value |
|
FROM |
|
variables |
|
WHERE |
|
variable_name |
|
LIKE |
|
'form::config_step%' |
|
AND |
|
variable_source_table = 'hosts' |
|
AND |
|
variable_source_uuid = ".$anvil->data->{sys}{use_db_fh}->quote($anvil->Get->host_uuid)." |
|
;"; |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { query => $query }}); |
|
|
|
$results = $anvil->Database->query({query => $query, source => $THIS_FILE, line => __LINE__}); |
|
$count = @{$results}; |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 3, list => { |
|
results => $results, |
|
count => $count, |
|
}}); |
|
foreach my $row (@{$results}) |
|
{ |
|
my $this_variable = $row->[0]; |
|
my $this_value = defined $row->[1] ? $row->[1] : ""; |
|
$anvil->Log->variables({source => $THIS_FILE, line => __LINE__, level => 2, list => { |
|
this_variable => $this_variable, |
|
this_value => $this_value, |
|
}}); |
|
|
|
$anvil->_make_hash_reference($anvil->data->{variables}, $this_variable, $this_value); |
|
} |
|
|
|
# This will be used when updating the job |
|
$anvil->data->{job}{uuid} = $job_uuid; |
|
$anvil->data->{job}{status} = "message_0015\n"; |
|
|
|
# Record that we've picked up this job. |
|
$anvil->Database->insert_or_update_jobs({ |
|
job_uuid => $anvil->data->{job}{uuid}, |
|
update_progress_only => 1, |
|
job_progress => 1, |
|
job_status => $anvil->data->{job}{status}, |
|
}); |
|
|
|
return(0); |
|
}
|
|
|