..
anvil-boot-server
* Finished anvil-migrate-server and anvil-safe-start! Lots of testing still needed for both though, and 'anvil-safe-start' does run as a job yet, but the logic is all there.
2021-04-19 00:32:13 -04:00
anvil-change-password
* Cleaned up a lot of logging in anvil-daemon and tools it calls.
2021-02-08 13:39:34 -05:00
anvil-check-memory
* Cleaned up a lot of logging in anvil-daemon and tools it calls.
2021-02-08 13:39:34 -05:00
anvil-configure-host
* In the never-ending attempt to resolve the build consistency issues, this commit enables extra debugging logging and, hopefully, implements a fix in anvil-daemon where a job could be started repeatedly.
2021-06-22 16:12:12 -04:00
anvil-cycle-vm-nics
* Updated System->check_firewall to use firewall-cmd and the contents of iptables-save is not available/reliable under RHEL8.
2019-01-23 19:54:01 -05:00
anvil-daemon
* Fixed a couple logging bugs.
2021-06-23 18:22:55 -04:00
anvil-delete-server
* This contains a fairly major change to how time stamps are handled. All INSERT and UPDATE calls now generate a new timestamp via Database->refresh_timestamp, instead of using 'sys::database::timestamp'. This was done in responce to finding a bug where tables in a database differed in both counts of public and private schemas (ip_addresses table, specifically) that failed to resync because the timestamps were re-used too often.
2021-06-08 15:23:15 -04:00
anvil-download-file
* Cleaned up a lot of logging in anvil-daemon and tools it calls.
2021-02-08 13:39:34 -05:00
anvil-file-details
* Cleaned up a lot of logging in anvil-daemon and tools it calls.
2021-02-08 13:39:34 -05:00
anvil-join-anvil
* This commit lowers the logging levels of some debug log entries. It's to help diagnose occassional function test failures with an unknown source.
2021-06-08 21:57:51 -04:00
anvil-maintenance-mode
* Improved infinite loop handling in Log->entry, but broke the Striker UI in the process. To be fixed next...
2019-01-18 03:19:36 -05:00
anvil-manage-files
* Several bugs fixed and enhancements;
2021-05-24 00:09:32 -04:00
anvil-manage-firewall
* Cleaned up a lot of logging in anvil-daemon and tools it calls.
2021-02-08 13:39:34 -05:00
anvil-manage-keys
* Fixed a bug with deleting bad keys where jobs to delete keys on non-dashboard machine wasn't being assigned to the proper target machine.
2021-06-05 19:07:25 -04:00
anvil-manage-power
* Added more logging while chasing a function test bug.
2021-06-08 23:56:48 -04:00
anvil-manage-server
* Reworked the attempt to repair the network in anvil-daemon to not touch the network until the machine has been running for at least two minutes.
2021-06-15 12:04:27 -04:00
anvil-migrate-server
* Made good progress on anvil-safe-stop. It will now stop or migrate servers (testing needed).
2021-04-23 00:04:20 -04:00
anvil-parse-fence-agents
* Cleaned up a lot of logging in anvil-daemon and tools it calls.
2021-02-08 13:39:34 -05:00
anvil-provision-server
* WIP - Slowly working on anvil-manage-server
2021-06-02 14:08:55 -04:00
anvil-rename-server
* This contains a fairly major change to how time stamps are handled. All INSERT and UPDATE calls now generate a new timestamp via Database->refresh_timestamp, instead of using 'sys::database::timestamp'. This was done in responce to finding a bug where tables in a database differed in both counts of public and private schemas (ip_addresses table, specifically) that failed to resync because the timestamps were re-used too often.
2021-06-08 15:23:15 -04:00
anvil-safe-start
* Several bugs fixed and enhancements;
2021-05-24 00:09:32 -04:00
anvil-safe-stop
* To address issues with scancore debugging, we needed a tool to purge old anvils and hosts from the database. The 'test.pl' in this commit contains the new logic that will be merged into tools/striker-purge-host shortly.
2021-05-08 02:02:46 -04:00
anvil-scan-network
* Cleaned up a lot of logging in anvil-daemon and tools it calls.
2021-02-08 13:39:34 -05:00
anvil-shutdown-server
* Finished anvil-migrate-server and anvil-safe-start! Lots of testing still needed for both though, and 'anvil-safe-start' does run as a job yet, but the logic is all there.
2021-04-19 00:32:13 -04:00
anvil-sync-shared
* Several bugs fixed and enhancements;
2021-05-24 00:09:32 -04:00
anvil-update-issue
* Updated kickstart to write the basic tools/anvil-update-issue to a freshly installed machine and run it from cron.
2019-09-24 23:35:31 -04:00
anvil-update-states
Note: Continuing to resolve the build issues with network startup. Expect breakage.
2021-06-14 01:58:25 -04:00
anvil-update-system
* Added more logging while chasing a function test bug.
2021-06-08 23:56:48 -04:00
anvil-watch-bonds
* Created Network->check_bonds() that checks to see if any bonds are down, or if any interfaces configured to be in a bond are not actually in it. It accepts a 'heal' parameter that, by default, will bring up a bond with no active links, but leaves degraded bonds alone. It call also take 'all' and will try to bring up any missing interfaces. This distinction exists so that if a link is flaky and someone takes it down manually until it can be repaired, it doesn't get turned back on.
2021-06-13 13:33:51 -04:00
fence_delay
* Started work on, but not at all finished, anvil-manage-server which will allow manipulation of a server's resources.
2021-05-20 00:16:09 -04:00
fence_pacemaker
* Increaded the scancore agent run timeout to 60 seconds.
2021-05-15 00:12:43 -04:00
Makefile.am
The theme of these commits is improving DB responsiveness.
2021-05-29 23:34:22 -04:00
scancore
* Updated Tools->catch_sig() to use return code 0 instead of 255 so that systemd doesn't think our daemons failed on stop.
2021-06-05 14:32:26 -04:00
striker-auto-initialize-all
* In the never-ending attempt to resolve the build consistency issues, this commit enables extra debugging logging and, hopefully, implements a fix in anvil-daemon where a job could be started repeatedly.
2021-06-22 16:12:12 -04:00
striker-auto-initialize-all.example
* Added a check to Database->get_ip_addresses() to check is a hash is set before using it, to help avoid unitialized variable messages.
2021-03-10 20:35:05 -05:00
striker-boot-machine
* Created tools/striker-boot-machine to, well, boot machines. It uses host_ipmi or, failing that, other fence methods when available to boot a node.
2021-05-01 19:49:27 -04:00
striker-get-peer-data
The theme of this commit is database cleanup and fixes.
2021-05-30 15:16:25 -04:00
striker-initialize-host
The theme of this commit is database cleanup and fixes.
2021-05-30 15:16:25 -04:00
striker-manage-install-target
The theme of this commit is database cleanup and fixes.
2021-05-30 15:16:25 -04:00
striker-manage-peers
The theme of this commit is database cleanup and fixes.
2021-05-30 15:16:25 -04:00
striker-parse-os-list
* Cleaned up a lot of logging in anvil-daemon and tools it calls.
2021-02-08 13:39:34 -05:00
striker-parse-oui
* Cleaned up a lot of logging in anvil-daemon and tools it calls.
2021-02-08 13:39:34 -05:00
striker-prep-database
* Fixed a couple logging bugs.
2021-06-23 18:22:55 -04:00
striker-purge-target
* This contains a fairly major change to how time stamps are handled. All INSERT and UPDATE calls now generate a new timestamp via Database->refresh_timestamp, instead of using 'sys::database::timestamp'. This was done in responce to finding a bug where tables in a database differed in both counts of public and private schemas (ip_addresses table, specifically) that failed to resync because the timestamps were re-used too often.
2021-06-08 15:23:15 -04:00
striker-scan-network
The theme of this commit is database cleanup and fixes.
2021-05-30 15:16:25 -04:00
striker-show-db-counts
The theme of these commits is improving DB responsiveness.
2021-05-29 23:34:22 -04:00
watch_drbd
* Added a really simple DRBD monitoring tool to the repo, will likely remove later.
2020-12-06 22:56:53 -05:00
0c475d2a2e