Debug Information Notice Warning Critical Warning Cleared Critical Cleared Important The host name: [#!variable!target!#] does not resolve to an IP address. The connection to: [#!variable!target!#] on port: [#!variable!port!#] as the user: [#!variable!user!#] was refused. If you recently booted the target, it may be just about finished booting. It is normal for the connection to be refused for a brief time during the boot process. There is no route to: [#!variable!target!#]. Is the machine in the process of booting up or powering off? Timed out while waiting for a reply from: [#!variable!target!#]. Is the machine booting up? If so, please wait a minute or two and try again. There was an unknown error while connecting to: [#!variable!target!#]. The error was: [#!variable!error!#] We were unable to log in to: [#!variable!target!#]. Please check that the password is correct or that passwordless SSH is configured properly. An SSH session was successfully opened to: [#!variable!target!#]. There was a problem establishing an SSH channel to the target: [#!variable!target!#] for shell call: [#!variable!shell_call!#] The SSH session to: [#!variable!target!#] was successfully closed. The SSH session to: [#!variable!target!#] was closed because 'no_cache' was set and there was an open SSH connection. Starting: [#!variable!program!#]. This is a "test" entry. It is multiple lines with single quotes ['] and double-quotes (") and here are random brackets{!}. It also has replacement variables: [#!variable!first!#] and [#!variable!second!#]. This is a test log entry that contains a secret [#!variable!password!#]! This is a test log entry at log level 2. This is a test log entry at log level 3. This is a test log entry at log level 4. This is a test critical log entry. This is a test error log entry. This is a test alert log entry. This is a test emergency log entry. About to run the shell command: [#!variable!shell_call!#] About to read the file: [#!variable!shell_call!#] About to write the file: [#!variable!shell_call!#] [ Error ] - There was a problem running the shell command: [#!variable!shell_call!#]. The error was: [#!variable!error!#]. [ Error ] - There was a problem reading the file: [#!variable!shell_call!#]. The error was: [#!variable!error!#]. [ Error ] - There was a problem writing the file: [#!variable!shell_call!#]. The error was: [#!variable!error!#]. Output: [#!variable!line!#]. About to open the directory: [#!variable!directory!#] Variables: read_file() was asked to read the file: [#!variable!file!#], but that file does not exist.]]> read_file() was asked to read the file: [#!variable!file!#] which exists but can't be read.]]> Reading: [#!variable!line!#]. get().]]> get().]]> Successfully read the words file: [#!variable!file!#]. find() failed to find: [#!variable!file!#].]]> skin() was asked to set the skin: [#!variable!set!#], but the source directory: [#!variable!skin_directory!#] doesn't exist. Ignoring.]]> search_directories() was passed the array: [#!variable!array!#], but it wasn't actually an array. Using @INC + path::directories::tools + \$ENV{'PATH'} for the list of directories to search instead.]]> read()' called without a file name to read.]]> read()' asked to read: [#!variable!file!#] which was not found.]]> read()' asked to read: [#!variable!file!#] which was not readable by: [#!variable!user!#] (uid/euid: [#!variable!uid!#]).]]> read_variable() was called but both the 'variable_name' and 'variable_uuid' parameters were not passed or both were empty.]]> insert_or_update_variables() method was called but both the 'variable_name' and 'variable_uuid' parameters were not passed or both were empty.]]> change_mode() was called without an invalid 'mode' parameter. It should have been three or four digits, but: [#!variable!mode!#] was passed.]]> The host: [#!variable!host!#] has released its database lock. write_file() was asked to write the file: [#!variable!file!#] but it already exists and 'overwrite' was not set. Aborting.]]> write_file() was asked to write the file: [#!variable!file!#] but it is not a full path. Aborting.]]> string() was asked to process the string: [#!variable!string!#] which has insertion variables, but nothing was passed to the 'variables' parameter.]]> call() was called but 'shell_call' was not passed or was empty.]]> The host: [#!variable!host!#] has renewed its database lock. The host: [#!variable!host!#] is requesting a database lock. copy_file() was asked to copy: [#!variable!source!#] to: [#!variable!target!#], but the target already exists and 'overwrite' wasn't specified, skipping.]]> level() was passed an invalid log level: [#!variable!set!#]. Only '0', '1', '2', '3' or '4' are valid.]]> [ Error ] - There is a local database defined, but it does not appear to exist and we could not initialize the database server. Is 'postgresql-server' installed? change_owner() was asked to change the ownership of: [#!variable!target!#] which doesn't exist.]]> copy_file() was called but the source file: [#!variable!source!#] doesn't exist.]]> connect()' method tried to connect to the same database twice: [#!variable!target!#].]]> Connecting to Database with configuration ID: [#!variable!id!#] - driver: . [#!variable!driver!#] - host: ... [#!variable!host!#] - port: ... [#!variable!port!#] - name: ... [#!variable!name!#] - user: ... [#!variable!user!#] - password: [#!variable!password!#] Initialized PostgreSQL. Updated: [#!variable!file!#] to listen on all interfaces. Updated: [#!variable!file!#] to require passwords for access. remote_call() was called but the port: [#!variable!port!#] is invalid. It must be a digit between '1' and '65535'.]]> Started the PostgreSQL database server. Database user: [#!variable!user!#] already exists with ID: [#!variable!id!#]. users_home() was asked to find the home directory for the user: [#!variable!user!#], but was unable to do so.]]> SSH session opened without a password to: [#!variable!target!#]. The database: [#!variable!host!# -> #!variable!name!#] with the ID: [#!variable!id!#] did not respond to pings and 'database::#!variable!id!#::ping_before_connect' is not set to '0' in '#!data!path::configs::striker.conf!#', skipping it. [ Warning ] - The database: [#!variable!name!#] on host: [#!variable!host!#] with ID: [#!variable!id!#] can not be used, skipping it. The database connection error was: ---------- #!variable!dbi_error!# ---------- Is the database server running on: [#!variable!target!#] and does the target's firewall allow connections on TCP port: [#!variable!port!#]? ] in: [#!data!path::configs::striker.conf!#].]]> * If the user name is correct, please update: database::#!variable!id!#::password = ]]> The connection to the database: [#!variable!name!#] on host: [#!variable!host!#:#!variable!port!#] was refused. Is the database server running? The connection to the database: [#!variable!name!#] on host: [#!variable!host!#:#!variable!port!#] failed because the name could not be translated to an IP address. Is this database server's host name in '/etc/hosts'? Successfully Connected to the database: [#!variable!name!#] (id: [#!variable!id!#]) on host: [#!variable!host!#:#!variable!port!#]. query() was called without a database ID to query and 'sys::read_db_id' doesn't contain a database ID, either. Are any databases available?]]> query() was asked to query the database with ID: [#!variable!id!#] but there is no file handle open to the database. Was the connection lost?]]> About to query: [#!variable!id!#]:[#!variable!query!#] Log->secure' is not set.]]> Log->secure' is not set.]]> initialize() was called without a database ID to query and 'sys::read_db_id' doesn't contain a database ID, either. Are any databases available?]]> initialize() was asked to query the database with ID: [#!variable!id!#] but there is no file handle open to the database. Was the connection lost?]]> initialize() was asked to initialize the database: [#!variable!server!#] (id: [#!variable!id!#]) but a core SQL file to load wasn't passed, and the 'database::#!variable!id!#::core_sql' variable isn't set. Unable to initialize without the core SQL file.]]> initialize() was asked to initialize the database: [#!variable!server!#] (id: [#!variable!id!#]) but the core SQL file: [#!variable!sql_file!#] doesn't exist.]]> initialize() was asked to initialize the database: [#!variable!server!#] (id: [#!variable!id!#]) but the core SQL file: [#!variable!sql_file!#] exist, but can't be read.]]> The database: [#!variable!server!#] needs to be initialized using: [#!variable!sql_file!#]. query() was asked to query the database: [#!variable!server!#] but no query was given.]]> write() was asked to write to the database: [#!variable!server!#] but no query was given.]]> check_memory() was called without a program name to check.]]> Testing access to the the database: [#!variable!server!#] prior to query or write. Program will exit if it fails. Access confirmed. write() was asked to write to the database with ID: [#!variable!id!#] but there is no file handle open to the database. Was the connection lost?]]> Log->secure' is not set.]]> Failed to connect to any database. check_alert_sent() was called but the 'modified_date' parameter was not passed and/or 'sys::db_timestamp' is not set. Did the program fail to connect to any databases?]]> [ Error ] - Failed to start the Postgres server. Please check the system logs for details. The database user: [#!variable!user!#] was created with ID: [#!variable!id!#]. [ Error ] - Failed to add the database user: [#!variable!user!#]! Unable to proceed. check_alert_sent() was called but the 'set' parameter was not passed or it is empty. It should be 'set' or 'clear'.]]> [ Warning ] - Failed to set an alert because this host is not yet in the database. This can happen if the alert was set before this host was added to the database. * Details of the alert: - Type: ......... [#!variable!type!#] - Set By: ....... [#!variable!set_by!#] - Record Locator: [#!variable!record_locator!#] - Name: ......... [#!variable!name!#] - Timestamp: .... [#!variable!modified_date!#] [ Error ] - There is no ScanCore database user set for the local machine. Please check: [#!data!path::config::striker.conf!#]'s DB entry: [#!variable!id!#]. Database user: [#!variable!user!#] password has been set/updated. register_alert() was called but the 'title_key' parameter was not passed or it is empty and 'header' is enable (default).]]> I am not recording the alert with message_key: [#!variable!message_key!#] to the database because its log level was lower than any recipients. The local machine's UUID was not read properly. It should be stored in: [#!data!sys::host_uuid!#] and contain hexadecimal characters in the format: '012345-6789-abcd-ef01-23456789abcd' and usually matches the output of 'dmidecode --string system-uuid'. If this file exists and if there is a string in the file, please verify that it is structured correctly. The database with ID: [#!variable!id!#] for: [#!variable!file!#] is behind. ScanCore database: [#!variable!database!#] already exists. The database with ID: [#!variable!id!#] for: [#!variable!file!#] and table: [#!variable!table!#] is behind. [ Warning ] - Failed to delete the temporary postgres password. insert_or_update_states() was called but the 'state_host_uuid' parameter was not passed or it is empty. Normally this is set to 'sys::data_uuid'.]]> [ Error ] - Failed to create the ScanCore database: [#!variable!database!#] ScanCore database: [#!variable!database!#] created. [ Warning ] - Failed to reload the Postgres server. Please check the system logs for details. The updated configuration is probably not active yet. Reloaded the PostgreSQL database server. configure_pgsql() method was called but the parent program is not running with root priviledges. Returning without doing anything.]]>. ', but no program name was read in.]]> #!variable!program!# has started. human_readable_to_bytes()' was passed the byte size: [#!variable!size!#] in the string: [sign: #!variable!sign!#, size: #!variable!size!#, type: #!variable!type!#] contains an illegal value. Sizes can only be integers or real numbers. It may also have commas in it which will be removed automatically.]]> human_readable_to_bytes()' was passed the byte size: [#!variable!size!#] in the string: [sign: #!variable!sign!#, size: #!variable!size!#, type: #!variable!type!#] appears to be a byte size already but the size does not seem to be an integer. Byte sizes can only be signed integers. It may also have commas in it which will be removed automatically.]]> human_readable_to_bytes()' method was called with the value: [#!variable!value!#] which we split into the size: [#!variable!size!#] and type: [#!variable!type!#]. The type appears to be invalid.]]> round()' was passed the number: [#!variable!number!#] which contains an illegal value. Only digits and one decimal place are allowed.]]> Current memory used by: [#!variable!program_name!#] is approximately: [#!variable!bytes!#] bytes (#!variable!hr_size!#). The 'smaps' proc file for the process ID: [#!variable!pid!#] was not found. Did the program just close? About to query: [#!variable!query!#] Entering method: [#!variable!method!#] Exiting method: [#!variable!method!#] Test Test replace: [#!variable!test!#]. Test Out of order: [#!variable!second!#] replace: [#!variable!first!#]. #!FREE!# This is a multi-line test string with various items to insert. It also has some #!invalid!# replacement #!keys!# to test the escaping and restoring. Here is the default output language: [#!data!defaults::language::output!#] Here we will inject 't_0000': [#!string!t_0001!#] Here we will inject 't_0002' with its embedded variables: [#!string!t_0002!#] Here we will inject 't_0006', which injects 't_0001' which has a variable: [#!string!t_0006!#]. This string embeds 't_0001': [#!string!t_0001!#] テスト テスト いれかえる: [#!variable!test!#]。 テスト、 整理: [#!variable!second!#]/[#!variable!first!#]。 #!FREE!# これは、挿入するさまざまな項目を含む複数行のテスト文字列です。 #!無効!#な置換#!キー!#を使ってエスケープとリストアをテストすることもできます。 デフォルトの出力言語は次のとおりです：「#!data!defaults::language::output!#」 ここで、「t_0000」を挿入します：[#!string!t_0001!#] ここでは、 「t_0002」に埋め込み変数を挿入します：「#!string!t_0002!#」 ここでは変数 「#!string!t_0006!#」を持つ 「t_0001」を注入する 「t_0006」を注入します。 この文字列には「t_0001」が埋め込まれています：「#!string!t_0001!#」