### This is the main Anvil! configuration file.

### Database
# Database connections;
# 
# Each Anvil! database is defined below using an incrementing counter as the second variable. The value of 
# the second variable is the local 'host_uuid' (via: dmidecode --string system-uuid | perl -ne 'print lc').
# This ensures that entries can be moved and copied without causing conflicts.
# 
# There are six variables for each database definition;
# host     = This is the (resolvable) host name or IP address of the peer database.
# port     = This is the TCP port used to connect to the database. By default, it is 5432
# password = This is the password used to connect to the database.
#            NOTE: Do not directly change the database password. Please use 'anvil-update-password' so that
#                  the WebUI, database, nodes and peers are all kept in sync.
# ping     = If set, this will cause a ping to be made against the database server before the actual 
#            connection is attempted. This can be useful when peer dashboards are offline for extended 
#            periods of time. The value can be any real number and will be used as the timeout for the actual
#            ping. If the peer dashboard is on the same subnet, a value of '0.25' (250ms) should be a good 
#            balance between giving the peer a chance to reply and not waiting too long when it is offline. 
#            If the peer is remote, you will want to set this to '1' (1000ms) or higher. 
#            
#            Setting this to '0' disables pinging before connecting entirely. In this case, if the peer is
#            offline, it will take about 3 seconds on average for the connection attempt to timeout. This 
#            might be necessary if the peer dashboard is behind a firewall/router or otherwise can't respond
#            to ICMP pings.
# NOTE: The database is called 'anvil' and the database owner is 'admin'.
#database::eec27c2f-2308-4b4f-bd81-24118b53f8a3::host		=	localhost
#database::eec27c2f-2308-4b4f-bd81-24118b53f8a3::port		=	5432
#database::eec27c2f-2308-4b4f-bd81-24118b53f8a3::password	=	Initial1
#database::eec27c2f-2308-4b4f-bd81-24118b53f8a3::ping		=	1

# Below are the databases configured for use by this system. Please be careful manually editing them. They 
# are updated by Striker and changes can be overwritten. Please do not alter or remove the 'start db list' 
# and 'end db list' comments below.
### start db list ###
### end db list ###

# To keep Anvil!'s database growth in check, an auto-archive mechanism is used by some agents where, at the 
# end of each scan, the number of records in the history schema for a given table are counted (restricted to 
# the agent's host, when appropriate). 
# 
# When the number exceeds the trigger, the number of records that are archived is approximately (number of 
# records above trigger + 'count'). This is not an exact number because a representative timestamp will be 
# selected from the hostory schema at this count, and then any record equal to or older than the time stamp 
# is removed.
# 
# To protect against the potential of using too much disk space, archives are off by default. Under normal 
# behaviour, old records are simple removed. To enable the archive function, set this to '1'.
#sys::database::archive::save_to_disk		=	1
# 
# When archiving to disk is enabled, to protect against large memory use or long archive times in the case 
# where the number of records to archive are particularly large, the 'division' value is used to break up the
# archive job into "chunks". Generally speaking, the division should be greater than the count, and never be 
# needed. However, if the archive process takes too long, or if the archive was triggered well above the 
# trigger value, the division can help prevent using too much memory at once. If division is set to '0', 
# archive jobs will never be divided.
# 
# The archives are all stored in the specified directory using the name format 
# '<agent>.<table>.<timestamp>.bz2' and the archives are synced between dashboards for safe keeping. Archive 
# files are never removed automatically.
# 
# To disable auto-archiving entirely, set 'trigger' to '0'.
# 
# NOTE: If the archive directory doesn't exist, Anvil! will create it 
#       automatically the first time it is needed.
sys::database::archive::compress		=	1
sys::database::archive::count			=	50000
sys::database::archive::directory		=	/usr/local/anvil/archives/
sys::database::archive::division		=	60000
sys::database::archive::trigger			=	100000


# This is the schema for the Anvil! database.
sys::database::schema			=	/usr/sbin/anvil/anvil.sql

# This puts a limit on how many queries (writes, generally) to make in a single batch transaction. This is 
# useful when doing very large transacions, like resync'ing a large table, by limiting how long a given 
# transaction can take and how much memory is used. 
#sys::database::maximum_batch_size	=	25000

### Apache stuff
#sys::apache::user			=	admin

# By default, we try to determine the host type using the host name. The rules used for this can be seen in 
# 'perldoc Anvil::Tools::System -> determine_host_type'. If you are using non-standard host names, or for some
# other reason want to statically assign the host type, you can do so with this variable. Note that this sets
# the host type of this host only. You will need to set this appropriately on other hosts.
# 
# Normally, you should not need to set this.
#sys::host_type				=	node
# This configuration file provides a way to override Anvil::Tools' built-in defaults.

# This controls the default language. The value is the ISO code of the country's language you want to use by
# default. Note that the logging language is set with 'defaults::log::language' below.
# NOTE: Be sure the language exists before changing it!
#defaults::languages::output				=	en_CA

# This controls how many loops Anvil::Tools::Words is allow to make while processing a string. This acts as a 
# mechanism to exit infinite loops, and generally should not need to be changed.
#defaults::limits::string_loops				=	1000

### Logging options
# This controls whether all database transactions are recorded or not. Genreally this should be left off 
# unless you are debugging the program.
# WARNING: This ignores 'secure', and will always be logged. Be careful about exposing sensitive data!
#sys::database::log_transactions			=	1

# This controls what log facility to use by default.
# NOTE: This will always be 'authpriv' when a log entry is marked as secure.
#defaults::log::facility				=	local0

# This controls what language logs are recorded in. Be sure that the language exists before changing it!
#defaults::log::language				=	en_CA

# This controls the default log level. See 'perldoc Anvil::Tools::Logs' for details.
#defaults::log::level					=	1

# This controls whether sensitive log entries are logged or not. Generally, this should be left disabled!
#defaults::log::secure					=	0,

# THis sets the default log server to send the log entries to. Leave it blank in most cases.
#defaults::log::server					=	

# This sets the default log tag used when logging an entry. Most programs will likely override this.
#defaults::log::tag					=	anvil


### Templates
# This sets the default template used when rendering HTML pages. It must be the same as the directory name
# under /var/www/html/skins/
#defaults::template::html				=	alteeve