The host name: [#!variable!target!#] does not resolve to an IP address. The connection to: [#!variable!target!#] on port: [#!variable!port!#] as the user: [#!variable!user!#] was refused. If you recently booted the target, it may be just about finished booting. It is normal for the connection to be refused for a brief time during the boot process. There is no route to: [#!variable!target!#]. Is the machine in the process of booting up or powering off? Timed out while waiting for a reply from: [#!variable!target!#]. Is the machine booting up? If so, please wait a minute or two and try again. There was an unknown error while connecting to: [#!variable!target!#]. The error was: [#!variable!error!#] We were unable to log in to: [#!variable!target!#]. Please check that the password is correct or that passwordless SSH is configured properly. An SSH session was successfully opened to: [#!variable!target!#]. There was a problem establishing an SSH channel to the target: [#!variable!target!#] for shell call: [#!variable!shell_call!#] The SSH session to: [#!variable!target!#] was successfully closed. The SSH session to: [#!variable!target!#] was closed because 'no_cache' was set and there was an open SSH connection. Starting: [#!variable!program!#]. This is a "test" entry. It is multiple lines with single quotes ['] and double-quotes (") and here are random brackets{!}. It also has replacement variables: [#!variable!first!#] and [#!variable!second!#]. This is a test log entry that contains a secret [#!variable!password!#]! This is a test log entry at log level 2. This is a test log entry at log level 3. This is a test log entry at log level 4. This is a test critical log entry. This is a test error log entry. This is a test alert log entry. This is a test emergency log entry. About to run the shell command: [#!variable!shell_call!#] About to read the file: [#!variable!shell_call!#] About to write the file: [#!variable!shell_call!#] [ Error ] - There was a problem running the shell command: [#!variable!shell_call!#]. The error was: [#!variable!error!#]. [ Error ] - There was a problem reading the file: [#!variable!shell_call!#]. The error was: [#!variable!error!#]. [ Error ] - There was a problem writing the file: [#!variable!shell_call!#]. The error was: [#!variable!error!#]. Output: [#!variable!line!#]. About to open the directory: [#!variable!directory!#] Variables: read_file() was called without a 'file' parameter, or the parameter was empty.]]> read_file() was asked to read the file: [#!variable!file!#], but that file does not exist.]]> read_file() was asked to read the file: [#!variable!file!#] which exists but can't be read.]]> Reading: [#!variable!line!#]. get().]]> get().]]> Successfully read the words file: [#!variable!file!#]. find() failed to find: [#!variable!file!#].]]> skin() was asked to set the skin: [#!variable!set!#], but the source directory: [#!variable!skin_directory!#] doesn't exist. Ignoring.]]> search_directories() was passed the array: [#!variable!array!#], but it wasn't actually an array. Using @INC + path::directories::tools + \$ENV{'PATH'} for the list of directories to search instead.]]> read()' called without a file name to read.]]> read()' asked to read: [#!variable!file!#] which was not found.]]> read()' asked to read: [#!variable!file!#] which was not readable by: [#!variable!user!#] (uid/euid: [#!variable!uid!#]).]]> change_mode() was called without a 'target' parameter, or the parameter was empty.]]> change_mode() was called without a 'mode' parameter, or the parameter was empty.]]> change_mode() was called without an invalid 'mode' parameter. It should have been three or four digits, but: [#!variable!mode!#] was passed.]]> change_owner() was called without a 'target' parameter, or the parameter was empty.]]> write_file() was asked to write the file: [#!variable!file!#] but it already exists and 'overwrite' was not set. Aborting.]]> write_file() was asked to write the file: [#!variable!file!#] but it is not a full path. Aborting.]]> string() was asked to process the string: [#!variable!string!#] which has insertion variables, but nothing was passed to the 'variables' parameter.]]> call() was called but 'shell_call' was not passed or was empty.]]> copy_file() was called but 'source' was not passed or was empty.]]> copy_file() was called but 'target' was not passed or was empty.]]> copy_file() was asked to copy: [#!variable!source!#] to: [#!variable!target!#], but the target already exists and 'overwrite' wasn't specified, so aborting.]]> level() was passed an invalid log level: [#!variable!set!#]. Only '0', '1', '2', '3' or '4' are valid.]]> read_mode() was called without a 'target' parameter, or the parameter was empty.]]> change_owner() was asked to change the ownership of: [#!variable!target!#] which doesn't exist.]]> copy_file() was called but the source file: [#!variable!source!#] doesn't exist.]]> connect()' method tried to connect to the same database twice: [#!variable!target!#].]]> Connecting to Database with configuration ID: [#!variable!id!#] - driver: .......... [#!variable!driver!#] - host: ............ [#!variable!host!#] - port: ............ [#!variable!port!#] - postgres_password: [#!variable!postgres_password!#] - name: ............ [#!variable!name!#] - user: ............ [#!variable!user!#] - password: ........ [#!variable!password!#] remote_call() was called but 'shell_call' was not passed or was empty.]]> remote_call() was called but 'target' was not passed or was empty.]]> remote_call() was called but 'user' was not passed or was empty.]]> remote_call() was called but the port: [#!variable!port!#] is invalid. It must be a digit between '1' and '65535'.]]> hostname_to_ip() was called but 'hostname' was not passed or was empty.]]> users_home() was called but 'user' was not passed or was empty.]]> users_home() was asked to find the home directory for the user: [#!variable!user!#], but was unable to do so.]]> SSH session opened without a password to: [#!variable!target!#]. The database with the ID: [#!variable!id!#] did not respond to pings and 'database::#!variable!id!#::ping_before_connect' is not set to '0' in '#!data!path::configs::striker.conf!#', skipping it. [ Warning ] - The database: [#!variable!name!#] on host: [#!variable!host!#] with ID: [#!variable!id!#] can not be used, skipping it. The database connection error was: ---------- #!variable!dbi_error!# ---------- Is the database server running on: [#!variable!target!#] and does the target's firewall allow connections on TCP port: [#!variable!port!#]? ] in: [#!data!path::configs::striker.conf!#].]]> * If the user name is correct, please update: database::#!variable!id!#::password = ]]> The connection to the database: [#!variable!name!#] on host: [#!variable!host!#:#!variable!port!#] was refused. Is the database server running? The connection to the database: [#!variable!name!#] on host: [#!variable!host!#:#!variable!port!#] failed because the name could not be translated to an IP address. Is this database server's host name in '/etc/hosts'? Successfully Connected to the database: [#!variable!name!#] (id: [#!variable!id!#]) on host: [#!variable!host!#:#!variable!port!#]. query() was called without a database ID to query and 'sys::read_db_id' doesn't contain a database ID, either. Are any databases available?]]> query() was asked to query the database with ID: [#!variable!id!#] but there is no file handle open to the database. Was the connection lost?]]> About to query: [#!variable!id!#]:[#!variable!query!#] Log->secure' is not set.]]> Log->secure' is not set.]]> initialize() was called without a database ID to query and 'sys::read_db_id' doesn't contain a database ID, either. Are any databases available?]]> initialize() was asked to query the database with ID: [#!variable!id!#] but there is no file handle open to the database. Was the connection lost?]]> initialize() was asked to initialize the database: [#!variable!server!#] (id: [#!variable!id!#]) but a core SQL file to load wasn't passed, and the 'database::#!variable!id!#::core_sql' variable isn't set. Unable to initialize without the core SQL file.]]> initialize() was asked to initialize the database: [#!variable!server!#] (id: [#!variable!id!#]) but the core SQL file: [#!variable!sql_file!#] doesn't exist.]]> initialize() was asked to initialize the database: [#!variable!server!#] (id: [#!variable!id!#]) but the core SQL file: [#!variable!sql_file!#] exist, but can't be read.]]> The database: [#!variable!server!#] needs to be initialized using: [#!variable!sql_file!#]. query() was asked to query the database: [#!variable!server!#] but no query was given.]]> write() was asked to write to the database: [#!variable!server!#] but no query was given.]]> check_memory() was called without a program name or PID to check.]]> Testing access to the the database: [#!variable!server!#] prior to query or write. Program will exit if it fails. Access confirmed. write() was asked to write to the database with ID: [#!variable!id!#] but there is no file handle open to the database. Was the connection lost?]]> Log->secure' is not set.]]> Test Test replace: [#!variable!test!#]. Test Out of order: [#!variable!second!#] replace: [#!variable!first!#]. #!FREE!# This is a multi-line test string with various items to insert. It also has some #!invalid!# replacement #!keys!# to test the escaping and restoring. Here is the default output language: [#!data!defaults::language::output!#] Here we will inject 't_0000': [#!string!t_0001!#] Here we will inject 't_0002' with its embedded variables: [#!string!t_0002!#] Here we will inject 't_0006', which injects 't_0001' which has a variable: [#!string!t_0006!#]. This string embeds 't_0001': [#!string!t_0001!#] テスト テスト いれかえる: [#!variable!test!#]。 テスト、 整理: [#!variable!second!#]/[#!variable!first!#]。 #!FREE!# これは、挿入するさまざまな項目を含む複数行のテスト文字列です。 #!無効!#な置換#!キー!#を使ってエスケープとリストアをテストすることもできます。 デフォルトの出力言語は次のとおりです：「#!data!defaults::language::output!#」 ここで、「t_0000」を挿入します：[#!string!t_0001!#] ここでは、 「t_0002」に埋め込み変数を挿入します：「#!string!t_0002!#」 ここでは変数 「#!string!t_0006!#」を持つ 「t_0001」を注入する 「t_0006」を注入します。 この文字列には「t_0001」が埋め込まれています：「#!string!t_0001!#」