Failed to read the number of phases for the PDU: [#!variable!name!#] at IP: [#!variable!ip!#] (sn: #!variable!serial_number!#). Able to now read the number of phases for the PDU: [#!variable!name!#] at IP: [#!variable!ip!#] (sn: #!variable!serial_number!#). Failed to read the number of outlets for the PDU: [#!variable!name!#] at IP: [#!variable!ip!#] (sn: #!variable!serial_number!#). Able to now read the number of outlets for the PDU: [#!variable!name!#] at IP: [#!variable!ip!#] (sn: #!variable!serial_number!#). Starting: [#!variable!program!#]. No APC PDUs found as configured fence devices, nothing to do. Failed to read the number of phases for the PDU: [#!variable!name!#] at IP: [#!variable!ip!#] (sn: #!variable!serial_number!#). Able to now read the number of phases for the PDU: [#!variable!name!#] at IP: [#!variable!ip!#] (sn: #!variable!serial_number!#). Failed to read the number of outlets for the PDU: [#!variable!name!#] at IP: [#!variable!ip!#] (sn: #!variable!serial_number!#). Able to now read the number of outlets for the PDU: [#!variable!name!#] at IP: [#!variable!ip!#] (sn: #!variable!serial_number!#). The PDU: [#!variable!name!#] with the serial number: [#!variable!serial_number!#] at the IP address: [#!variable!ip_address!#] has returned. The model of the PDU: [#!variable!name!#] has changed from; [#!variable!old_model_number!#] to: [#!variable!new_model_number!#] The serial number of the PDU: [#!variable!name!#] has changed from; [#!variable!old_model_number!#] to: [#!variable!new_model_number!#]. This is expected if the PDU was replaced. The manufacture date of the PDU: [#!variable!name!#] has changed from: [#!variable!old_manufacture_date!#] to: [#!variable!new_manufacture_date!#]. This is expected if the PDU was replaced. The firmware on the PDU: [#!variable!name!#] has changed from: [#!variable!old_firmware_version!#] to: [#!variable!new_firmware_version!#]. The hardware version on the PDU: [#!variable!name!#] has changed from: [#!variable!old_hardware_version!#] to: [#!variable!new_hardware_version!#]. This is expected if the PDU was replaced. The IP address assigned to the PDU: [#!variable!name!#] has changed from: [#!variable!old_ipv4_address!#] to: [#!variable!new_ipv4_address!#]. The MAC address on the PDU: [#!variable!name!#] has changed from: [#!variable!old_mac_address!#] to: [#!variable!new_mac_address!#]. This is expected if the PDU was replaced. The MTU size set on the PDU: [#!variable!name!#] has changed from: [#!variable!old_mtu_size!# bytes] to: [#!variable!new_mtu_size!# bytes]. The link speed for the PDU: [#!variable!name!#] has changed from: [#!variable!old_link_speed_mbps!#] (#!variable!old_link_speed_hr!#) -> [#!variable!new_link_speed_mbps!#] (#!variable!new_link_speed_hr!#) The number of phases on the PDU: [#!variable!name!#] has changed from: [#!variable!old_phase_count!#] to: [#!variable!new_phase_count!#]. This is expected if the PDU was replaced. The number of outlets on the PDU: [#!variable!name!#] has changed from: [#!variable!old_outlet_count!#] to: [#!variable!new_outlet_count!#]. This is expected if the PDU was replaced. The uptime of the PDU: [#!variable!name!#] has increased from: [#!variable!old_uptime!#] to: [#!variable!new_uptime!#]. The PDU: [#!variable!name!#] appears to have rebooted. The uptime changed from; [#!variable!old_uptime!#] to: [#!variable!new_uptime!#]. Was the power restored after a power outage? The wattage draw through the PDU: [#!variable!name!#] has changed from: [#!variable!old_total_wattage_draw!#] to: [#!variable!new_total_wattage_draw!#]. The phase number: [#!variable!phase!#] on the PDU: [#!variable!name!#] has returned. The maximum amperage threshold on the phase: [#!variable!phase!#] of the PDU: [#!variable!name!#] has changed from: [#!variable!old_outlet_count!#] to: [#!variable!new_outlet_count!#]. The amperage draw on phase: [#!variable!phase!#] of the PDU: [#!variable!name!#] has changed from: [#!variable!old_phase_current_amperage!#] to: [#!variable!new_phase_current_amperage!#]. The amperage drawing through the phase: [#!variable!phase!#] of the PDU: [#!variable!name!#] is below the low-warning threshold. This is not a concern for the Anvil!, but would only happen if a user configured a low draw alert. So this could be a concern to a user of this Anvil! system. The amperage drawing through the phase: [#!variable!phase!#] of the PDU: [#!variable!name!#] has rised over the high critical alert threshold! The amperage drawing through the phase: [#!variable!phase!#] of the PDU: [#!variable!name!#] is back below the high critical alert threshold. The amperage drawing through the phase: [#!variable!phase!#] of the PDU: [#!variable!name!#] has rised over the high warning alert threshold! The amperage drawing through the phase: [#!variable!phase!#] of the PDU: [#!variable!name!#] is back below the high warning alert threshold. The amperage drawing through the phase: [#!variable!phase!#] of the PDU: [#!variable!name!#] has risen above the low-warning threshold. The phase number: [#!variable!phase!#] on the PDU: [#!variable!name!#] has vanished! The outlet number: [#!variable!outlet!#] on the PDU: [#!variable!name!#] has returned. The name of the outlet: [#!variable!outlet!#] on the PDU: [#!variable!name!#] has changed from: [#!variable!old_outlet_name!#] to: [#!variable!new_outlet_name!#]. The phase that the outlet: [#!variable!outlet!#], on the PDU: [#!variable!name!#] is on has changed from: [#!variable!old_outlet_on_phase!#] to: [#!variable!new_outlet_on_phase!#]. The state of the outlet: [#!variable!outlet!#], on the PDU: [#!variable!name!#] has changed from: [#!variable!old_outlet_state!#] to: [#!variable!new_outlet_state!#]. A new outlet: [#!variable!outlet!#] was found on the PDU: [#!variable!pdu_name!#], on phase: [#!variable!on_phase!#] and it is: [#!variable!state!#] (outlet name: [#!variable!name!#]). The outlet number: [#!variable!outlet!#] on the PDU: [#!variable!name!#] has vanished! A new PDU: [#!variable!name!#] has been found - Serial Number: .............. [#!variable!serial_number!#] - Model Number: ............... [#!variable!model_number!#] - Manufacture Date: ........... [#!variable!manufacture_date!#] - Firmware version: ........... [#!variable!firmware_version!#] - Hardware version: ........... [#!variable!hardware_version!#] - IP Address: ................. [#!variable!ipv4_address!#] - MAC Address: ................ [#!variable!mac_address!#] - MTU Size: ................... [#!variable!mtu_size!#] Bytes - Link Speed: ................. [#!variable!link_speed_mbps!#] (#!variable!link_speed_hr!#) - Number of phases:............ [#!variable!phase_count!#] - Max amps per phase: ......... [#!variable!phase_max_amperage!#] - Low amp warning: ............ [#!variable!phase_low_amp_warning!#] - High amp warning: ........... [#!variable!phase_high_amp_warning!#] - High amp critical: .......... [#!variable!phase_high_amp_critical!#] - Number of outlets: .......... [#!variable!outlet_count!#] - Phase: [#!variable!phase!#] current amperage draw: [#!variable!amps!#]. - Outlet: [#!variable!outlet!#], on phase: [#!variable!on_phase!#] is: [#!variable!state!#] (name: [#!variable!name!#]). The PDU model: [#!variable!model!#] at the IP address: [#!variable!ip_address!#] has vanished! Did the network cable come unplugged? Unknown On Off Down Mbps s (yyyy/mm/dd)