* Updated Striker->generate_manifest() to add pod and make the prefix,
sequence and domain parameters required.
* Created the check_for_broken_manifests() function for anvil-daemon to
detect/remove broken manifests.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added a called to Database->_check_for_duplicates to Database->resync_databases
* Added 'check_for_resync => 1' to anvil-configure-host.
Signed-off-by: digimer <mkelly@alteeve.ca>
Moved the logic to a new private method, and call it now from the active
Striker in the once per minute loop. The duplicate variable issue seems
to be not entirely uncommon.
Signed-off-by: digimer <mkelly@alteeve.ca>
With this new system, a 'primary_db' is chosen (first connected DB UUID when sorted) and only it does resyncs. Further, resyncs have been pulled from all tools except anvil-daemon. So with this new system, the chances of duplicate, simultaneous resyncs should be removed (hopefully for real this time).
* Database->check_agent_data() no longer calls a resync after loading a
schema.
* Removed the Database->coonnect() 'all' parameter
* The database used to read from is now always the same as the primary,
even if there is a local DB.
* Database->connect() 'check_for_resync' parameter can now be set to
'2', which means "check for resync _if_ I am primary", where '1' still
checks for resync no matter what.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Created System->wait_on_dnf() which was plucked from anvil-daemon, and now also called in scancore and anvil-safe-start.
* Updated scancore and anvil-safe-start to check on start that DRBD's kernel module is available (and build if not).
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a bug in System->reboot_needed() where the cache file path had a typo in the hash key.
* Updated anvil-daemon to use the full path to dnf when determining if a dnf process was running.
Signed-off-by: digimer <mkelly@alteeve.ca>
Note that work has started it reworking anvil-update-system, but it is incomplete (and broken) in this commit.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated anvil-update-system to reboot a target whose kernel updated using an anvil-manage-power job,
* Started making striker-update-cluster run as a job (not at all complete). Fixed a bug where the wrong IP was being used when finding access to a target.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a bug in anvil-safe-stop where it wouldn't trigger a migration when the peer is online.
* Updated anvil-update-system to set job_data to 'failed' and exit with rc 4 if the os update failed.
* Got striker-update-cluster to error out and exit if a called 'anvil-update-system' job failed.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added logging to anvil-provision-server and anvil-daemon to try to find the cause of jobs being re-run after completing. May have fixed with a fix to job_progress updates going to 100 too early in some cases.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a small logging bug in DRBD->allow_two_primaries().
* Updated Database->get_jobs() to record jobs sorted by modified_date so that jobs can be run in the order they were recorded.
* Updated anvil-daemon to track which commands need to be run, and when two or more of the same command need to be run, they're run serially, with each subsequent run starting after the previous one completes.
Signed-off-by: digimer <mkelly@alteeve.ca>
* In DRBD->get_next_resource(), implemented a "hold" system where the DRBD minor and TCP port(s) returned are marked as being held for one minute. So subsequent calls won't use the same numbers.
* In anvil-daemon, added a check in run_jobs() where only one instance of a given job command will be started per 2-second loop. This should help reduce the chance of simultaneous race confitions in general.
* Removed from anvil-provision-server and most other tools the call to Job->get_job_uuid(). If the program is called without the job_uuid, don't try to find it. This allows a human (or script) to make repeated calls to a program without one of those calls running a pending job instead.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Created DRBD->parse_resource() to pass a specific DRBD resource's XML data.
* Fixed a bug in Get->available_resources() so that if the threads is lower than CPU cores, the cores are used as the total available to VMs.
* Fixed bugs in Get->server_from_switch() where it just wasn't working properly.
* Updated scan_drbd to not reset a resource's size to 0-bytes when a resource goes offline.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added call to System->configure_logind() to anvil-join-anvil and anvil-version-changes.
* Updated fence_pacemaker to add '--reboot' to the 'stonith_admin' call to ensure DRBD-triggered fence requests reboot instead of just turning nodes off.
This commit address issue #279.
Signed-off-by: digimer <digimer@gravitar.alteeve.com>
* Created Get->virsh_list_net() and Get->virsh_list_os() that call and parse osinfo-query directly to create lists of supported network interfaces and OS optimization options used when provisioning VMs. The later of which is used to replace the old language list of OSes, which was clunky and prone to missing valid options.
* Updated Get->available_resources() to remove the old anvil_dr1_host_uuid mechanism of finding and referencing DR resources.
* Started adding --network support to anvil-provision-server to allow users to specify a specific network bridge, MAC address and model to use for a new VM.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got anvil-manage-alerts managing alert overrides.
* Created, but for now commented out, the new 'audit' table.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-daemon to call anvil-manage-files on a per-minute basis to handle files added outside of the WebUI.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Disabled striker-parse-oui until it can be reworked to store the the OUI data in a flat file instead of in the database.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added multiple new private methods to Network that help in managing the firewall.
* Updated Server->boot_server to manage the firewall after the server boots. Updated ->migrate_server to create a job, if a database connection exists, for the migration target to update it's firewall as soon after the server appears as possible.
* Updated ocf:server:alteeve to manage the firewall when called post-migration, in case there was no DB connection and the job above didn't run. Fixed a bug where the disk state wasn't being evaluated properly.
* Updated scan-server to check that the firewall is managed when a server state has changed.
* Updated anvil-daemon to run Network->manage_firewall on startup.
* Heavily reworked 'anvil-manage-server' to either just run 'Network->manage_firewall', or if passed '--server X', to wait for the server to appear for up to 1 minute, then to check that the firewall is managed (to capture servers being migrated to the host.)
* Removed firewall management from striker-prep-database.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated scan-drbd to purge peer records that no longer have corresponding LVM data.
* Updated System->{en,dis}able-service to take the 'now' paramter which, when passed, causes the action to take immediate effect.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Changes Database->connect to always use the first DB connected to, not the local one if that applies. This treats the first DB (sorted by UUID) as "primary" and the second (or third...) as more of a backup.
* Moved db_in_use and lock_request to use the 'states' table instead of the variables table. These are set and removed so often that it was messing up things with resync's when the data is transient anyway. Fixed multiple bugs with both to better set and clear properly.
* Created Database->read_state() to assist with the above changes.
* Updated Database->refresh_timestamp() to specifically check that the returned time stamp differs from the previously used one, looping until they differ if needed.
* Disabled striker-manage-install-target when called to update the repos, as the Install Target function doesn't work at this point.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Network->load_ips() to load extra information about the interfaces.
* Updated ocf:alteeve:server to not check libvirtd daemon state on server start.
* Updated scan-hardware to check for duplicate entries and purge if found.
* Updated scan-network to check for the 'default' virbr0 interface by checking if the config file exists instead of calling virsh.
* Updated scan-server to have better logging.
* Created the new (and incomplete) anvil-test-alerts tool
* Updated scancore to support --purge to pass to all agents and then exit.
* Updated ScanCore->call_scan_agents() to no longer use 'timeout' as it was causing issues with virsh calls.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated DRBD->get_devices() to store information about the nodes for each resource.
* Got more work done on anvil-report-usage.
Signed-off-by: Digimer <digimer@alteeve.ca>
digimer
Tsu-ba-me
digimer
Digimer