* Updated Database->connect to take a specific UUID to attempt a connection to.
* Renamed some old 'sys::x' variables related to the database to 'sys::database::x' to conform better to coding standards.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the RPM to .13 to disable postun's disabling of postgres, which breaks Anvil! software using the database during RPM updates.
* Fixed a logging bug where the number of DB connections was not inserting the number properly.
* Fixed exits in tools/anvil-prep-database.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started adding support for updating the striker (and later, all) systems. This will be handled by the in-progress tools/anvil-update-system program.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Update Anvil::Tools->new() to access the parameters 'log_level', 'log_secure' and 'debug', streamlining the frequent calls to $anvil->Log->level and ->secure in program startup, and allowing the values to take effect during the ->new constructor.
* Passed 'debug' to child method calls in more places (still more to do though).
* Fixed a bug where 'test_table' wasn't set in the right place, causing the database to try to initialize repeatedly.
* Made Database->archive_database only run if called with root access.
* Now the number of database connections are stored in 'sys::db_connections' instead of checking the returned number, and that is cleared on disconnect.
* Started working more on 'anvil-daemon', including adding support for System->call being taking 'background', 'stderr_file' and 'stdout_file' paramters which, when set, used Proc::Simple to background the process.
* Did some more work on database archiving, though still far from done.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where "form::error_massage" was default to ' ' which caused simple checks to thing there was an error when all was fine.
* Got the "add new sync peer" form confirmation box displaying and cleaned up the CSS a bit.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Get->users_home() to default to return the hore directory for the user running the program.
* Updated Remote->call() to start working on handling timeouts.
* Updated Storage->change_owner(), ->make_directory() and ->write_file() to default the the user and group running the program.
* Fixed a bug in home reporting the MAC address of NICs when confirming configuration of Striker. Also changed showing the domain to the hostname.
* Got more work done on sync peers.
* Updated the RPM spec file to install on Fedora 28.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added another check and better error handling to Template->get() to print a more useful message if a template is found but fails to parse.
* Moved some strings into the words file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Moved templates around different files to clean things up.
* Moved the "back" and "refresh" icons over to the right by the logo, and added a new icon for handling mail, alerts, install targets and manifests.
* Started work on the Striker configuration sub-page.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where the old style '#!replace!...!#' replacement variables were not being escaped when processing variable insertions into strings.
* Made the body variable be stored in 'form::body' instead of passing around the '$body' variable.
* Created a set of new icons.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up 'button' CSS class links and submit CSS to match.
* Re-enabled reboot at the end of a tools/anvil-configure-striker run.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added error messages to Striker configuration forms.
* Fixed a bug in home->get_network_details() function to handle single IPs in network.xml.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_network_interfaces where independent interfaces (not under a bridge or a bond) were not being saved.
* Continued working on improving Striker's network config jquery/form functions.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed tools/anvil-configure-network to tools/anvil-configure-striker given that it will also now update system passwords.
* Started working on tools/anvil-update-states to properly handle a Striker with already-configured networking.
* Cleaned up tools/anvil-change-password.
* Fixed a bug in Storage->update_config to set the ownership of anvil.conf to 'apache:apache' so that the web server can read it.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Account->encrypt_password to return a hash reference with keys matching to database column names for consistency sake,
* Renamed 'users -> user_password' to 'user_password_hash' for clarity.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where some '$anvil->{}' variables should have been '$anvil->data->{}'.
* Started merging message keys on 'error_xxxx', 'warning_xxxx', etc.
* The anvil-configure-network now configures the network. Commented out, the tool can reconfigure the entire network without a reboot, but a current issue with the post-configured system refusing to use the allocated interface as the default gateway is to be reviewed at a future time. For now, a closing reboot will be issued.
* Started creating 'anvil-change-password' that will update passwords, including apache (and configure .htpasswd when needed).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed some logging in Get->cgi() and generally cleaned up logging levels.
* Got striker to the point where the job to reconfigure the network is saved in the database and the dashboard goes offline until it is done.
* Created the start of the new anvil-configure-network tool.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'file' and 'line' arguments to the Database->insert_or_update_X methods to allow for the original caller's file and line number to be recorded in the SQL call logs.
* Cleaned up how logging to 'anvil.log' logging is handled.
* Updated anvil-update-states to ignore libvirt bridges and to manually set the speed and duplex of virtio network based interfaces.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug with resync, but others remain as resync is incomplete (at least for network_interfaces).
* Currently, tools/anvil-update-states is broken while working on the above issue.
* Reworked the jobs table and removed the units/anvil-jobs.service unit. Jobs will be invoked and backgrounded in all calls.
* Started adding missing hidden form fields.
* Updated the 'server' OCF resource agent version and metadata.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed display issues when showing a summary of what will be done if the user confirms the reconfiguration of the Striker.
Signed-off-by: Digimer <digimer@alteeve.ca>
We've decided to give up on trying to keep ScanCore, AN::Tools and Striker as three separate things. We had originally hoped to make ScanCore easily separatable from the Anvil!, but this was adding increasing complexity to the project and complexity is the enemy of reliability.
In this release, AN::Tools becomes Anvil::Tools, all configuration files move to /etc/anvil and all programs and data files move to /usr/sbin/anvil. Words files are now merged, as are SQL schemas (ScanCore agents will still maintain their own, later). The journald tag has changed from 'an-tools' to 'anvil'.
Other changes;
* Tools.t has been updated to handle existing tests. New methods and parameters still need to have tests added though.
* Added a simple test.pl script used for testing things outside the main program. It will be removed before final release.
* Added the simple 'watch_logs' bash script to more easily tail output.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Reworked step 2 to allow for empty DNS and empty gateway fields.
* Step2 now loads previous answers from the database properly.
* Fixed (the lack of) recording each network's IP and subnet to the database.
* Added (and disabled for now) a jquery feature for clearing the variables from the URL to keep it from getting exceptionally long.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Record step2 answers into the database.
* Added back hidden for values in config step 2 that recorded step 1's answers.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Validate->form_field() which makes it a little quicker/easier to sanity check a form field that uses one of the other Validate methods.
* Added Validate->is_mac to validate MAC addresses.
* Got config_step2 finishes and sanity checked.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started using Time::HiRes and recording the run time of programs using AN::Tools at log level 2.
* Added a check in tools/an-prep-database to write journald.conf.d/an.conf to disable rate limiting to allow high log levels without losing messages.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a start-check to make sure 'home' could read the host UUID and exit if not.
* Removed network_interface_current_name / network_interface_requested_name from the network_interfaces DB table and used simply network_interface_name.
* Added caching to Storage->read_file().
* Now record form answers in the variables table as 'form::<form_name>::<variable>::value' and read the same when the form is first loaded.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->connect to always test if hosts table exists and load the core schema if not.
* Fixed Database->write to log all SQL when 'sys::database::log_transactions' is set.
* Got tools/scancore-update-states scanning and recording network interface data to the database. Also removed it writing out the XML status file.
Signed-off-by: Digimer <digimer@alteeve.ca>
Digimer