* Switched all calls to virsh to use Sys::Virt to deal with contention of simultaneous virsh calls.
* Removed collecting screenshots from scan-server.
* Fixed a bad variable substitution in an alert.
* Fixed a bug where a server's boot time wasn't being recorded properly.
* Reworked how we determine which server definition was most recently updated and propogated.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated DRBD->manage_resource() to check if the host is StandAlone when asked to 'up' a resource and, if so, connect first. Also updated this to error out gracefully if the call to allow_two_primaries() returns non-zero.
* Update Server->migrate_virsh() to error out gracefully if the DRBD->allow_two_primaries() returns non-zero.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated Server->shutdown_virsh() to work without a database connection.
* Updated System->reboot_needed() to store/read from a cache file when the database is not available.
* Updated anvil-safe-start to remove the old --enable/disable/status switches, now that we use anvil-safe-start.service systemd unit.
* Reworked anvil-safe-stop to work without a database connection, and to work on DR hosts.
* Updated anvil-special-operations to add new tasks, but it's likely these new tasks aren't needed and will be removed very shortly.
* Added/updated multiple man pages.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated Cluster->recover_server() to set the desired recovery state before calling the crm_resource refresh.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated anvil-manage-server-storage to the point where it can now insert and eject optical disks!
* Updated System->call to log parameters if 'shell_call' isn't set.
* Fixed a bug in anvil-manage-server process_interactive where an $anvil->data reference was being scoped.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Created DRBD->parse_resource() to pass a specific DRBD resource's XML data.
* Fixed a bug in Get->available_resources() so that if the threads is lower than CPU cores, the cores are used as the total available to VMs.
* Fixed bugs in Get->server_from_switch() where it just wasn't working properly.
* Updated scan_drbd to not reset a resource's size to 0-bytes when a resource goes offline.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added a check and exit if anvil-manage-dr is asked to protect a server on a machine that doesn't know about that server.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added call to System->configure_logind() to anvil-join-anvil and anvil-version-changes.
* Updated fence_pacemaker to add '--reboot' to the 'stonith_admin' call to ensure DRBD-triggered fence requests reboot instead of just turning nodes off.
This commit address issue #279.
Signed-off-by: digimer <digimer@gravitar.alteeve.com>
* Adds a "sensitive" DB connection to ocf:alteeve:server when migrating a VM. This is needed so that migrations can be done cold or live, based on servers -> server_live_migration.
This resolves issue #284.
Signed-off-by: digimer <digimer@gravitar.alteeve.com>
* Updated anvil-safe-stop to check for VMs running, even if the cluster is stopped, when --stop-servers is used.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Server->parse_definition() to check if a failed 'virsh list' output was passed in. Also changed it to not exit if the XML can't be parsed.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added multiple new private methods to Network that help in managing the firewall.
* Updated Server->boot_server to manage the firewall after the server boots. Updated ->migrate_server to create a job, if a database connection exists, for the migration target to update it's firewall as soon after the server appears as possible.
* Updated ocf:server:alteeve to manage the firewall when called post-migration, in case there was no DB connection and the job above didn't run. Fixed a bug where the disk state wasn't being evaluated properly.
* Updated scan-server to check that the firewall is managed when a server state has changed.
* Updated anvil-daemon to run Network->manage_firewall on startup.
* Heavily reworked 'anvil-manage-server' to either just run 'Network->manage_firewall', or if passed '--server X', to wait for the server to appear for up to 1 minute, then to check that the firewall is managed (to capture servers being migrated to the host.)
* Removed firewall management from striker-prep-database.
Signed-off-by: Digimer <digimer@alteeve.ca>
Created, but not finished, tools/anvil-report-usage that will print a report of server resource allocation and Anvil! resource availability.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the copywrite date to 2022.
* Updated the database resync to not run on machines host VMs to help reduce the chance of oom-killer terminating a VM.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Server->parse_definition() to call DRBD->get_devices() so that referenced LVs can be loaded properly.
* Continued WIP in anvil-manage-server
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated DRBD->allow_two_primaries() to take the 'set_to' parameter which can be 'yes' to all and 'no' to disallow dual-primary.
* Updated ocf:alteeve:server to call allow_two_primaries() with 'set_to' = 'no' instead of calling 'adjust' after a migration completes.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated scan-cluster to check / set which node should be preferred if a netsplit causes a fence race.
* Fixed a bug in Server->shutdown_virsh() where a shutdown timeout would go into a loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* WIP - Continuing work on the new anvil-manage-server tool.
* Updated Database->get_anvils() to load information on the files available on each Anvil! system.
* Updated Database->insert_or_update_network_interfaces() to no longer take the 'timestamp' parameter.
* Removed all logging from Database->refresh_timestamp() to speed it up, given how often it will be called now.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-daemon to have a new function called "handle_special_cases" called during startup that does any weird bug mitigation required. For now, this is used to mitigate against rhbz#1961562, though certainly it will be used for other reasons later.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Changed the alteeve repo RPM to the new cimmunity/enterprise repo
* Fixed a bug where 'fence_data::updated' was causing the fences web page to break.
* Fixed a bug in Database->insert_or_update_network_interfaces() where certain interfaces were being repeatedly added to the database.
* Fixed a bug in Database->_find_behind_databases() was marking DBs as behind even though they had less than 10 columns off.
* Fixed a bug in Get->host_name() where, if the host name was changed on disk but the environment variable was still the old name, it would cause the hostname to waffle back and forth and cause constant updated to /etc/hosts.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created DRBD->check_if_syncsource() and ->check_if_synctarget() that return '1' if the target host is currently SyncSource or SyncTarget for any resource, respectively.
* Updated DRBD->update_global_common() to return the unified-format diff if any changes were made to global-common.conf.
* Created ScanCore->check_health() that returns the health score for a host. Created ->count_servers() that returns the number of servers on a host, how much RAM is used by those servers and, if available, the estimated migration time of the servers. Updated ->check_temperature() to set/clear/return the time that a host has been in a warning or critical temperature state.
* Finished ScanCore->post_scan_analysis_node()!!! It certainly has bugs, and much testing is needed, but the logic is all in place! Oh what a slog that was... It should be far more intelligent than M2 though, once flushed out and tested.
* Created Server->active_migrations() that returns '1' if any servers are in a migration on an Anvil! system. Updated ->migrate_virsh() to record how long a migration took in the "server::migration_duration" variable, which is averaged by ScanCore->count_servers() to estimate migration times.
* Updated scan-drbd to check/update the global-common.conf file's config at the end of a scan.
* Updated ScanCore itself to not scan when in maintenance mode. Also updated it to call 'anvil-safe-start' when ScanCore starts, so long as it is within ten minutes of the host booting.
Signed-off-by: Digimer <digimer@alteeve.ca>
* The get_mmeory endpoint was completed.
* The get_replicated_storage endpoint was completed, though it requires testing and likely has issues.
To prepare for the get_status endpoint work, I needed to update ScanCore and modules to track the host_status. This commit contains the work needed for this.
* Updated ScanCore->post_scan_analysis_striker() to use configured fence devices (except PDUs) to check if a target host is off or on, in there is no host_ipmi interface. In all cases, if a machine can be confirmed on or off, the host_status is now updated.
* To support the above fence based power checks, updated scan-cluster to store the on-disk CIB in the new scan_cluster -> scan_cluster_cib colume.
* Updated ScanCore->parse_cib() to map stonith primitive IDs to fence agents. Updated ->parse_crm_mon() to not call if the executable doesn't exist to avoid unhelpful error messages in the logs when called from a Striker.
* Update DRBD->gather_data() to get the size data from /sys/block/drbd<minor>/size' x '/sys/block/drbd<minor>/queue/logical_block_size so it works when a device is Secondary (and can't be promoted).
* Updated Database->get_hosts_info() to record the short host name as well as the stored host name. Created ->update_host_status() as a wrapper to ->insert_or_update_hosts() that only updates the host status.
* Updated anvil-join-anvil to disabled ksm and ksmtuned daemons.
* Updated scancore and anvil-daemon to set the host_status to 'online' on startup.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Cluster->parse_cib() when a server that is off wasn't setting 'status'.
* Renamed 'server::location::<server>::host' to '...::host_name' in several places.
* Got more work done on anvil-delete-server, up to the point where it calls the new Cluster->delete_server() method.
* Updated fence_pacemaker to call 'drbdadm adjust all' to dampen an issue where in-memory fence configs seem to change, preventing reconnection of the peer after it reboots from the fence. More testing needed on this issue.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_power() where the check to see if 'power_ups_uuid' was passed in was reversed. Also fixed a bug where the convertion of the value to TRUE/FALSE for the old value wasn't being set correctly.
* Updated Server->get_definition() to only translate the host name to a uuid if the host uuid wasn't passed in. Added a sanity check on the UUID as well.
* Cleaned up how existing UPSes are displayed in Striker when managing UPSes. Also renamed the form's scan agents to match the real agent names.
* Fixed alert sorting in scan-apc-pdu.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created (but not finished) scan-apc-pdu
* Added support to tracking maintenance-mode for nodes in Cluster->parse_cib
* Created Remote->read_snmp_oid().
* Created Server->get_definition.
* Updated Server->get_status() to write-out server XML files on-demand.
* Finished scan-cluster.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updates servers -> server_host_uuid to drop the 'NOT NULL' constraint.
* Created the new Get->server_uuid_from_name() that does what it says on the tin. Fixed a bug in ->host_uuid_from_name() where the host name was being returned instead of the UUID.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the servers table to remove the 'not null' constraints on the server_start_after_server_uuid, server_pre_migration_file_uuid and server_post_migration_file_uuid columns.
* Updated ScanCore->agent_startup() to connect to the database(s) when there isn't a table list.
* Updated Server->migrate_virsh() to test for DB access before making DB calls (to allow ocf:alteeve:server to function even if all ScanCore DBs are offline).
* Updated ocf:alteeve:server to connect to the databases (though work without it), and changed '$FILE_NAME' to be 'ocf:alteeve:server' (to make logging more legible)
* Created the skeleton for 'scan-storage'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed servers -> 'server_clean_stop' to 'server_user_stop' to make it clearer what the column represents.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Server->migrate_virsh() to set 'servers' -> 'server_state' to 'migrating' and clear it again once the migation completes. Also added support for cold (frozen) versus live migrations.
* Updated Cluster->parse_cib() to check if a server with the server_state set to 'migrating' isn't actually migrating anymore and, if not, to clear that state. This is needed as scan-server will blindly ignore/skip any migrating server, and if a migration call is interrupted, the state could get stuck.
* Updated the 'servers' database table (and associated Database methods) to add columns for;
** server_ram_in_use - tracking RAM used by a running server
** server_configured_ram - RAM allocated to a running server (used with the above to alert a user and track _currently_ available RAM)
** server_updated_by_user - To be set by Striker tools to indicate when the user made a change that needs to push out to nodes / running server.
** server_boot_time - Tracks the unixtime when the server booted (to track uptime even if the server migrates across nodes).
* Created Get->anvil_name_from_uuid() to easily convert an Anvil! UUID into a name. Also created ->host_uuid_from_name() to translate a host name into a host UUID.
* Created Server->get_runtime() that translates a server name into a process ID and then uses that to determine how long (in seconds) it has been running. This is used when a server transitions from 'shut off' to 'running' to determine exactly when the server booted (current time - runtime).
* Renamed all 'Server->parse_definition' calls that used 'from_memory' to 'from_virsh' to clarify the data source.
* Made scan-hardware smarter about RAM change alerts.
* Updated scancore to load agent strings on startup so that processing pending alerts works properly.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Began (but haven't finished) Database->insert_or_update_servers().
* Created Storage->get_file_stats() to collect the (l)stat information for a file.
* Got more work done on scan-server.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Did more work on parsing server data out of the CIB. There is still an issue with determining which node currently hosts a resource, however.
* Renamed Server->boot to ->boot_virsh, ->shutdown to ->shutdown_virsh and ->migrate to ->migrate_virsh to clarify that these methods work on the raw virsh calls, outside of pacemaker (indeed, they are what the pacemaker RA uses to do what pacemaker asks).
* Got more work done on the scan-cluster SA.
* Created the empty files for the pending scan-server SA.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created 'Cluster->which_node' that returns 'node1' or 'node2' to indicate which node a host is.
* Continued working on scan_cluster; decided to make it not host-dependent.
Signed-off-by: Digimer <digimer@alteeve.ca>
* More work done on Email->send_email() to, well, actually send email (which it isn't doing yet, but it's close).
* Updated Words->key() to include the bad key name when no entry for the requested key exists in the words.xml file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got email server configuration under way. A mail server can now be configured via Email->_configure_for_server(), but more work is needed on when to switch between configs.
* Fixed some logging of passwords that wasn't being checked to see if secure logging was enabled or not.
* Fixed a bug in Striker where the back arrow in email config sub-sections weren't going back to the main email menu.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Server->get_status() where the call to Storage->rsync's returned output checked for '!!errer!!' instead of '!!error!!'.
* Fixed a bug in Storage->rsync where, when no port was passed in, it would try to specify an empty port and fail.
Signed-off-by: Digimer <digimer@alteeve.ca>
digimer
Tsu-ba-me
digimer
Digimer
Fabio M. Di Nitto