* Fixed a bug in Database->insert_or_update_network_interfaces where independent interfaces (not under a bridge or a bond) were not being saved.
* Continued working on improving Striker's network config jquery/form functions.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a typo in Database->insert_or_update_bridges().
* Added 'bond_mac_address' and 'bond_operational' to the bonds table.
* Gathered data needed for bonds in tools/anvil-update-states and got bonds recording successfully (but more testing needed).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Changed the database table ip_address_subnet to ip_address_subnet_mask for clarity.
* Added a check to tools/anvil-update-states to update bond entries instead of just interface entries (also not done).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created (but not yet tested) Database->insert_or_update_ip_addresses() and the associated ip_addresses database table to store IP address details and reference the interface they're on.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed tools/anvil-configure-network to tools/anvil-configure-striker given that it will also now update system passwords.
* Started working on tools/anvil-update-states to properly handle a Striker with already-configured networking.
* Cleaned up tools/anvil-change-password.
* Fixed a bug in Storage->update_config to set the ownership of anvil.conf to 'apache:apache' so that the web server can read it.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where some '$anvil->{}' variables should have been '$anvil->data->{}'.
* Started merging message keys on 'error_xxxx', 'warning_xxxx', etc.
* The anvil-configure-network now configures the network. Commented out, the tool can reconfigure the entire network without a reboot, but a current issue with the post-configured system refusing to use the allocated interface as the default gateway is to be reviewed at a future time. For now, a closing reboot will be issued.
* Started creating 'anvil-change-password' that will update passwords, including apache (and configure .htpasswd when needed).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed some logging in Get->cgi() and generally cleaned up logging levels.
* Got striker to the point where the job to reconfigure the network is saved in the database and the dashboard goes offline until it is done.
* Created the start of the new anvil-configure-network tool.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'file' and 'line' arguments to the Database->insert_or_update_X methods to allow for the original caller's file and line number to be recorded in the SQL call logs.
* Cleaned up how logging to 'anvil.log' logging is handled.
* Updated anvil-update-states to ignore libvirt bridges and to manually set the speed and duplex of virtio network based interfaces.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug with resync, but others remain as resync is incomplete (at least for network_interfaces).
* Currently, tools/anvil-update-states is broken while working on the above issue.
* Reworked the jobs table and removed the units/anvil-jobs.service unit. Jobs will be invoked and backgrounded in all calls.
* Started adding missing hidden form fields.
* Updated the 'server' OCF resource agent version and metadata.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created a new tool (that may go away) for monitoring for network changes as quickly and with as few resources as possible.
Signed-off-by: Digimer <digimer@alteeve.ca>
We've decided to give up on trying to keep ScanCore, AN::Tools and Striker as three separate things. We had originally hoped to make ScanCore easily separatable from the Anvil!, but this was adding increasing complexity to the project and complexity is the enemy of reliability.
In this release, AN::Tools becomes Anvil::Tools, all configuration files move to /etc/anvil and all programs and data files move to /usr/sbin/anvil. Words files are now merged, as are SQL schemas (ScanCore agents will still maintain their own, later). The journald tag has changed from 'an-tools' to 'anvil'.
Other changes;
* Tools.t has been updated to handle existing tests. New methods and parameters still need to have tests added though.
* Added a simple test.pl script used for testing things outside the main program. It will be removed before final release.
* Added the simple 'watch_logs' bash script to more easily tail output.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a start-check to make sure 'home' could read the host UUID and exit if not.
* Removed network_interface_current_name / network_interface_requested_name from the network_interfaces DB table and used simply network_interface_name.
* Added caching to Storage->read_file().
* Now record form answers in the variables table as 'form::<form_name>::<variable>::value' and read the same when the form is first loaded.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->connect to always test if hosts table exists and load the core schema if not.
* Fixed Database->write to log all SQL when 'sys::database::log_transactions' is set.
* Got tools/scancore-update-states scanning and recording network interface data to the database. Also removed it writing out the XML status file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Changed Log->secure and Log->level to take new settings using 'set => X' parameter to bring them inline with other modules.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Tools.pm->_set_paths where a path set to '#!not_found!#' was being set (the existing value should have been left alone).
* Fixed some escaping in Log->entry. Also added some additional checks to error more gracefully.
* Created Storage->copy_file() that, well, copies files.
* Fixed Storage->find to not call Log->entry.
* Fixed Storage->make_directory() to only pass the first digit when passed a GID or UID with more that one digit (as can happen with GIDs).
* Updated Storage->write_file() to take 'secure' as a parameter to treat the file contents as containing secure data for logging purposes.
* Created System->check_daemon and ->start_daemon to check and start systemd daemons, as needed.
* Updated scancore-daemon to support running things just once on invocation (effectively run on boot or daemon restart). Call scancore-database. from here.
* Added reading striker.conf to scancore-update-states.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Storage->write_file() where the parent directory wasn't created if it was missing. Also removed passing the mode to the parent directory creation as the file mode rarely applies to the directory (ie: 644 breaks directories but is common for files).
* Changed Template->skin to return just the skin name, not the path.
* Updated scancore-update-states to write the network state information to both xml (for ScanCore) and JSON (for jquery) files.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed 'defaults::languages' to 'defaults::language'.
* Created Storage->change_mode(), Storage->change_owner(), Storage->make_directory() and Storage->write_file() that does what their names imply, using the shell commands instead of the built-in commands (may switch to them later). The ->make_directory() method will create any needed parent directories.
* Moved System->read_file() to the Storage module as it made more sense there. For now, System is empty.
* Created Words->language to set or check the active output language.
* Fixed Template->get() to use Words->language.
* Updated Words->string() to take the new 'string' parameter which, when set, is used instead of the 'key' parameter and is treated as a pre-retrieved string, so replacement keys are directly injected.
* Updated Template->get() to take the 'variables' parameter and then uses Words->string({string => ...}) to process the replacement keys.
* Updated tools/scancore-update-states to write out the network interface states to the status.xml file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Log->language that sets/returns the active log language.
* Created Log->variables that takes a hash reference and logs their variable: [$value] pairs.
* Created the new /usr/sbin/striker/ directory which is added to the list of search directories. We will store our tools here.
* Created the scancore-daemon and scancore-daemon.unit files which will handle all the things we used to use crontab for, minus ScanCore itself.
* Created the scancore-update-states that will eventually store some machine state information in a file that the web browser can read.
* Created the cgi-bin/home script that will be the main landing page for the Striker UI.
* Added some of the initial html files.
Signed-off-by: Digimer <digimer@alteeve.ca>
Digimer