* Disabled striker-parse-oui until it can be reworked to store the the OUI data in a flat file instead of in the database.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added multiple new private methods to Network that help in managing the firewall.
* Updated Server->boot_server to manage the firewall after the server boots. Updated ->migrate_server to create a job, if a database connection exists, for the migration target to update it's firewall as soon after the server appears as possible.
* Updated ocf:server:alteeve to manage the firewall when called post-migration, in case there was no DB connection and the job above didn't run. Fixed a bug where the disk state wasn't being evaluated properly.
* Updated scan-server to check that the firewall is managed when a server state has changed.
* Updated anvil-daemon to run Network->manage_firewall on startup.
* Heavily reworked 'anvil-manage-server' to either just run 'Network->manage_firewall', or if passed '--server X', to wait for the server to appear for up to 1 minute, then to check that the firewall is managed (to capture servers being migrated to the host.)
* Removed firewall management from striker-prep-database.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated scan-drbd to purge peer records that no longer have corresponding LVM data.
* Updated System->{en,dis}able-service to take the 'now' paramter which, when passed, causes the action to take immediate effect.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Changes Database->connect to always use the first DB connected to, not the local one if that applies. This treats the first DB (sorted by UUID) as "primary" and the second (or third...) as more of a backup.
* Moved db_in_use and lock_request to use the 'states' table instead of the variables table. These are set and removed so often that it was messing up things with resync's when the data is transient anyway. Fixed multiple bugs with both to better set and clear properly.
* Created Database->read_state() to assist with the above changes.
* Updated Database->refresh_timestamp() to specifically check that the returned time stamp differs from the previously used one, looping until they differ if needed.
* Disabled striker-manage-install-target when called to update the repos, as the Install Target function doesn't work at this point.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Network->load_ips() to load extra information about the interfaces.
* Updated ocf:alteeve:server to not check libvirtd daemon state on server start.
* Updated scan-hardware to check for duplicate entries and purge if found.
* Updated scan-network to check for the 'default' virbr0 interface by checking if the config file exists instead of calling virsh.
* Updated scan-server to have better logging.
* Created the new (and incomplete) anvil-test-alerts tool
* Updated scancore to support --purge to pass to all agents and then exit.
* Updated ScanCore->call_scan_agents() to no longer use 'timeout' as it was causing issues with virsh calls.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated DRBD->get_devices() to store information about the nodes for each resource.
* Got more work done on anvil-report-usage.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated striker-auto-initialize-all() to reconnect to DBs during waits to better detect when a DB is marked as offline.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Also removed the variables for the database name and DB user name, setting them statically now.
* Created Database->shutdown() to more kindly stop a local database server.
* Added 'check_db_in_use_states()' to anvil-daemon to clean any stale entries marking a database as in use.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->resync_databases() to never run on non-striker machines. On Strikers, before a resync, _age_out_data() is called to clear old data in long-off databases.
* Created System->check_memory() that is loosely based on anvil-check-memory, but checks to see if it's being controlled by a systemctl started daemon and, if so, reads the RAM in use from it's status output.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a divide-by-zero bug in anvil-boot-server when no servers exist yet.
* Fixed a bug in anvil-daemon where the local databsae engine was being started when it shouldn't.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-daemon to check for files in /mnt/shared/incoming on striker dashboards and add them to the media library if needed.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the copywrite date to 2022.
* Updated the database resync to not run on machines host VMs to help reduce the chance of oom-killer terminating a VM.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created DRBD->_initialize_drbd() to makes sure the DRBD kernel module can load and tries to build the module, if necessary. This is meant to provide support for clients that can't access needed internet resource (or the internet at all).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'configure_firewall()' to 'striker-prep-database' to explicitely open the postgresql service for all active zones.
* Did some general logging changes and cleanup around the same.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in anvil-daemon where striker-prep-database was always being called, when it shouldn't in some cases.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-daemon->prep_database() to only run if the database dump file doesn't exist. (If it does, it's clearly configured).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->archive_database() to return the full path to the dump file.
* Disabled enabling the postgresql daemon.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->backup_database() that creates a pg_dump of the active database.
* Created Database->load_database() that loads the database from a flat file, optionally creating a backup before doing so, and using iptables to block access during the process.
* Updated Database->configure_pgsql() to not start the postgresql daemon unless it just initialized the DB.
* Much work, not yet complete, to Database->connect() to stop after the first successful connection. Added logic that, if not connection was established and the host is a Striker, to load a peer's backup, if it exists, and then start the local daemon.
* Updated anvil-daemon to now have a section to run tasks on a ten minute cycle, which will later be used for the primary Striker to dump / copy its database to peer(s).
Signed-off-by: Madison Kelly <mkelly@alteeve.ca>
* Updated Jobs->get_job_uuid() to accept the new 'incomplete' parameter that, when set, will look for jobs whose progress is > 1 and < 100.
* Updated ScanCore-agent_startup() to take the new 'no_db_ok' parameter which returns with '0' if no DB is available and that parameter is set to '1'.
* Fixed a logging bug in 'anvil-join-anvil'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated scan-cluster to get the CIB from pcs instead of reading the CIB from disk.
* Updated anvil-daemon to always call striker-prep-database at log level 2 while trying to find the cause of rare postgres config failures. Also updated striker-prep-database to use the new method of initializing the DB.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed the special job status 'scancore_startup' to 'anvil_startup', given it's handled by anvil-daemon.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the 'print' parameter to Log->variables() to allow printing to STDOUT when set.
* Renamed Network->check_bonds() to Network->check_networks() in anticipation of adding bridge monitoring / repair to it later.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-daemon to call Network->check_bonds() with 'all' on startup, then woth 'down_only' once per minute to try to heal down'ed bonds.
* Updated anvil-watch-bonds to take a 'run-once' switch and exit after one report, if set.
Signed-off-by: Digimer <digimer@alteeve.ca>
* WIP - Continuing work on the new anvil-manage-server tool.
* Updated Database->get_anvils() to load information on the files available on each Anvil! system.
* Updated Database->insert_or_update_network_interfaces() to no longer take the 'timestamp' parameter.
* Removed all logging from Database->refresh_timestamp() to speed it up, given how often it will be called now.
Signed-off-by: Digimer <digimer@alteeve.ca>
Digimer
Madison Kelly