* Fixed a bug in Words->parse_banged_string where some variable strings were not being cleared, causing infinite loops.
* Added job progress reporting in striker-manage-install-target, and made it only refresh the RPM repo when '--refresh' is specified (with --force now forcing the issue). This was done to allow adding it into anvil-daemon in such a way that it would only update the RPM repo once a day.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Get->anvil_version where the version of local systems and remote systems differed in closing new lines.
* Fixed a bug in Database->insert_or_update_variables() where the 'debug' parameter wasn't working.
* Renamed System->determine_host_type -> System->get_host_type.
* Fixed a bug in System->get_uptime where there was a newline after the uptime integer.
* Updated anvil-daemon to track and record the state of the Install Target feature on Striker dashboards.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Work on anvil-manage-install-target to enable/disable dhcpd. Also to only refresh the RPM repo periodically. Fixed a bug where it always reported that the kickstart files were not updated, even when they were.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Storage->read_file() where the last newline wasn't always being faithfully recorded.
* Created System->restart_daemon (as opposed to ->reload_daemon).
* Got creating/updating dhcpd.conf / dhcpd working in tools/anvil-manage-install-target.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up some logging.
* Made the "Reload" buttons work more sensibly and cleaned up some webui display stuff.
* Got deleting peers mostly working (well, it works, but then it goes into a loop thinking it needs to resync the now-gone database until the daemon restarts).
* Fixed a race condition bug where if a job exited between the time that anvil-daemon got a list of PIDs and when it checked to see if that specific pid was alive, a job that actually completed could be restarted.
* Added a loop check to anvil-manage-striker-peers where it would hold until a database connection to the newly added peer was available, preventing a condition where re-adding a peer (and so the host_uuid is in hosts) cause the job belonging to the peer to be recorded locally and then never synced to the peer.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'sys::log_date' which controls if the date and time is pre-pended to log entries.
* Created Get->host_name() which takes a host UUID and returns the 'host_name' from the 'hosts' table, if found.
* Cleaned up some HTML templates and logging.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a check to all 'Database->insert_or_update_*' methods to check if the passed-in reference UUID was found and return an empty string if not.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got the webui portion of requesting a poweroff and reboot done, but still working on finishing anvil-manage-power (work on which lead to the above improvement).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created the Anvil::Tools::Jobs module to handle general job processing task. Moved 'update_progress' from tools/anvil-update-system to it and generalized it.
* Added some missing CDATA wrappers to the words XML file strings with '>' in it.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished (for now) adding support for monitoring jobs while a node is in maintenance mode!
* Cleaned up the display of job data and redid how buttons (real and classed links) are displayed to be consistent.
* Fixed a bug in anvil-daemon where a disconnect wasn't being called between loops, causing DB connections to pile up.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-update-system. to set and then clear maintenance mode.
* Added the files needed for jquery-ui v1.12.1
* Added unused and xcf format icons to the alteeve skin.
* Disabled all 'postun' scriptlets in anvil.spec.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started adding the display of running and recently finished jobs to Striker when in maintenance mode. Still lots to do.
* Started working on the logic for what will soon be Words->decypher_string in anvil-daemon to process strings stored as '<key>,!!<name1>!<value1>!!,...,!!<nameN>!<valueN>!!'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a reboot button to managing the Striker. This button and the text associated with it reflects the need for the reboot.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed tools/anvil-clear-reboot to tools/anvil-reboot-needed and changed it to behave like anvil-maintenance-mode.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created tools/anvil-clear-reboot to clear the "reboot needed" flag. Also created, but not yet using (and may not use) units/anvil-boot-time.service.
* Started work on having jobs show their data via JSON / jquery.
* Updated anvil-update-system to record messages indicating the progress so far.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->connect to take a specific UUID to attempt a connection to.
* Renamed some old 'sys::x' variables related to the database to 'sys::database::x' to conform better to coding standards.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started adding support for updating the striker (and later, all) systems. This will be handled by the in-progress tools/anvil-update-system program.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Update Anvil::Tools->new() to access the parameters 'log_level', 'log_secure' and 'debug', streamlining the frequent calls to $anvil->Log->level and ->secure in program startup, and allowing the values to take effect during the ->new constructor.
* Passed 'debug' to child method calls in more places (still more to do though).
* Fixed a bug where 'test_table' wasn't set in the right place, causing the database to try to initialize repeatedly.
* Made Database->archive_database only run if called with root access.
* Now the number of database connections are stored in 'sys::db_connections' instead of checking the returned number, and that is cleared on disconnect.
* Started working more on 'anvil-daemon', including adding support for System->call being taking 'background', 'stderr_file' and 'stdout_file' paramters which, when set, used Proc::Simple to background the process.
* Did some more work on database archiving, though still far from done.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where "form::error_massage" was default to ' ' which caused simple checks to thing there was an error when all was fine.
* Got the "add new sync peer" form confirmation box displaying and cleaned up the CSS a bit.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Get->users_home() to default to return the hore directory for the user running the program.
* Updated Remote->call() to start working on handling timeouts.
* Updated Storage->change_owner(), ->make_directory() and ->write_file() to default the the user and group running the program.
* Fixed a bug in home reporting the MAC address of NICs when confirming configuration of Striker. Also changed showing the domain to the hostname.
* Got more work done on sync peers.
* Updated the RPM spec file to install on Fedora 28.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added another check and better error handling to Template->get() to print a more useful message if a template is found but fails to parse.
* Moved some strings into the words file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Moved templates around different files to clean things up.
* Moved the "back" and "refresh" icons over to the right by the logo, and added a new icon for handling mail, alerts, install targets and manifests.
* Started work on the Striker configuration sub-page.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where the old style '#!replace!...!#' replacement variables were not being escaped when processing variable insertions into strings.
* Made the body variable be stored in 'form::body' instead of passing around the '$body' variable.
* Created a set of new icons.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up 'button' CSS class links and submit CSS to match.
* Re-enabled reboot at the end of a tools/anvil-configure-striker run.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_network_interfaces where independent interfaces (not under a bridge or a bond) were not being saved.
* Continued working on improving Striker's network config jquery/form functions.
Signed-off-by: Digimer <digimer@alteeve.ca>
