anvil

Commit Graph

Author	SHA1	Message	Date
Digimer	4e9882812d	* Fixed a bug where the periodic database dumps on the primary database Striker were not sync'ing to peers. Also fixed a bug where these periodic dumps weren't running at all. * Updated anvil-daemon->prep_database() to only run if the database dump file doesn't exist. (If it does, it's clearly configured). Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	72b17ff1f9	* Reworked how databases are stopped, now being handled in anvil-daemon. This way, initial starts will still do traditional resyncs, then shut down. This should allow the best of both worlds, where data is not lost on striker start/stop loss/recovery, but operate normally otherwise without delays. * Updated Database->archive_database() to return the full path to the dump file. * Disabled enabling the postgresql daemon. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Madison Kelly	922899ea78	* WIP: Working on a new method of failing over between which Striker is the active database, instead of running N-number of databases all the time. * Created Database->backup_database() that creates a pg_dump of the active database. * Created Database->load_database() that loads the database from a flat file, optionally creating a backup before doing so, and using iptables to block access during the process. * Updated Database->configure_pgsql() to not start the postgresql daemon unless it just initialized the DB. * Much work, not yet complete, to Database->connect() to stop after the first successful connection. Added logic that, if not connection was established and the host is a Striker, to load a peer's backup, if it exists, and then start the local daemon. * Updated anvil-daemon to now have a section to run tasks on a ten minute cycle, which will later be used for the primary Striker to dump / copy its database to peer(s). Signed-off-by: Madison Kelly <mkelly@alteeve.ca>	3 years ago
Digimer	6664c5b77f	* Fixed a bug where scan-drbd, with DR configured, was not recording TCP ports assigned to connections properly. * More bugs fixed in anvil-manage-dr, tested repeatedly as a job and so far, so good. Other functionality still to come. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	da9dc03d04	Updated anvil-manage-dr to update the job progress and convert prints into strings. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	ffd15406e0	* anvil-manage-dr can now protect a server! Still lots to do though. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	20a784baa2	* Continuing work on anvil-manage-dr. Got it to the point where it should (but doesn't yet) create the new DRBD config and the LV(s) on DR. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	5b35204af4	* Updated DRBD->get_next_resource() to take the new 'dr_tcp_ports' ports which, if set, returns two free TCP ports. * Got anvil-manage-dr to the point where it writes the updated resource configuration to enable DR support. (untexted) Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	76eb09393f	Fixed a bug found in the last commit causing newly-added VGs to storage group membership to use the wrong UUID as the internal VG UUID. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	9edf698c37	Updated Database->get_storage_group_data() to determine when a node or DR host needs to be removed from a Storage group, or when a member of an Anvil! needs to be added to a storage group. Created Storage->get_vg_name() to assist with anvil-manage-dr, which is still a WIP. Continued work on anvil-manage-dr (which exposed the issue that required the update to Database->get_storage_group_data(). Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	f55a315d4b	Merge pull request #174 from Tsu-ba-me/issues/172-get-server-preview Web UI: add endpoint for getting server preview	3 years ago
Tsu-ba-me	59ce16f531	build: add netpbm-progs as node and DR dependency	3 years ago
Tsu-ba-me	089675d4d8	build: re-order python3-websockify in anvil specfile	3 years ago
Tsu-ba-me	f61527edf7	fix(tools): save screenshots to states table	3 years ago
Tsu-ba-me	c1859bc8d8	fix(tools): use netpbm tools instead of imagemagick	3 years ago
Tsu-ba-me	65613f501b	fix(tools): add option to resize server screenshot	3 years ago
Tsu-ba-me	7467036054	build(tools): add anvil-get-server-screenshot script to build	3 years ago
Tsu-ba-me	256051a6ca	build(cgi-bin): add get_server_screenshot endpoint to build	3 years ago
Tsu-ba-me	26d5c60696	fix(cgi-bin): rename response body screenshot property	3 years ago
Tsu-ba-me	da6b4d39c6	fix(tools): disable line wrap in image Base64 output	3 years ago
Tsu-ba-me	4ef231b567	fix(tools): prevent too frequent inserts of server VM screenshots	3 years ago
Tsu-ba-me	d195a53ba2	feat(cgi-bin): add endpoint for fetching server screenshot	3 years ago
Tsu-ba-me	1014299d38	fix(tools): enable anvil-get-server-screenshot to be a job	3 years ago
Tsu-ba-me	f97a820b48	feat(tools): add script to take screenshot of server VM	3 years ago
Digimer	1011ac06c5	Merge pull request #186 from ClusterLabs/dependabot/npm_and_yarn/striker-ui/next-11.1.1 chore: bump next from 11.1.0 to 11.1.1 in /striker-ui	3 years ago
dependabot[bot]	6f36c1392b	chore: bump next from 11.1.0 to 11.1.1 in /striker-ui Bumps [next](https://github.com/vercel/next.js) from 11.1.0 to 11.1.1. - [Release notes](https://github.com/vercel/next.js/releases) - [Changelog](https://github.com/vercel/next.js/blob/canary/release.js) - [Commits](https://github.com/vercel/next.js/compare/v11.1.0...v11.1.1) --- updated-dependencies: - dependency-name: next dependency-type: direct:production ... Signed-off-by: dependabot[bot] <support@github.com>	3 years ago
Digimer	221f468b6c	* Fixed a bug where duplicate IPMI sensor names of type 'Volts' wasn't being processed properly, causing sensor data to not be recorded. * Added a comment about disabling /etc/hosts management in anvil.conf. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	61d4eb7d7f	Merge pull request #185 from ClusterLabs/anvil-tools-dev Anvil tools dev	3 years ago
Digimer	2f8b1fb72e	Updated anvil-provision-server so that when the OS type is 'win7', set the disk to sata and the NIC to e1000e. Also updated it to store the virt-install call in the 'variables' table and write it out to /mnt/shared/provision. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	06f679d7e7	* Added the ability to disable anvil-daemon management of /etc/hosts. * Updated the OS variant list. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	8e5daa090a	Merge pull request #184 from ClusterLabs/anvil-tools-dev Anvil tools dev	3 years ago
Digimer	4427fe9f0d	* Found the source of the vnet constantly cycling back to 'up' bug. The anvil-update-state tool was marking the vnet device operational state back to 'unknown' and scan-network was marking it back up. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	213babaaf2	Trying to fix a bug where vnet devices keep reporting as having returned. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	e40d0e2444	Fixed a bug where if a database is pingable but the pgsql database is down, and it's the first database tested (or local), then the DB handle used to read / quote fails. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	823c73d6d8	Merge pull request #183 from ClusterLabs/anvil-tools-dev Fixed a race condition where configuring the IPMI BMC would appear to…	3 years ago
Digimer	acee16e05a	Merge branch 'master' into anvil-tools-dev	3 years ago
Digimer	4c7bb45ab9	Fixed a race condition where configuring the IPMI BMC would appear to fail because the BMC wouldn't report the user list after a cold reset. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	36db7c8239	Merge pull request #182 from Tsu-ba-me/issues/180-to-nextjs-11 Web UI: upgrade to Next.js major version 11	3 years ago
Tsu-ba-me	37926daca6	chore: rebuild web UI	3 years ago
Tsu-ba-me	2808fdd123	style(striker-ui): fix styling to make build succeed	3 years ago
Tsu-ba-me	34f7ece2f9	build(striker-ui): ignore out/ when linting	3 years ago
Josue	ed3a058937	chore(front-end): add ESlint next.js integration	3 years ago
Josue	89318d2617	chore(front-end): migrate to Next.js v11.1.0	3 years ago
Digimer	cd10a8850e	Merge pull request #181 from ClusterLabs/anvil-tools-dev Fixed a bug where corosync's configuration of a backup ring was broken.	3 years ago
Digimer	6cbdc388d4	Fixed a bug where corosync's configuration of a backup ring was broken. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	789ac6e8ad	Merge pull request #179 from ClusterLabs/anvil-tools-dev Anvil tools dev	3 years ago
Digimer	bc2671c758	Merge branch 'master' into anvil-tools-dev	3 years ago
Digimer	04cb116c1b	Updated anvil-parse-fence-agents to validate each fence agent's metadata is valid before adding it to the unified XML. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	8abb5b46e0	* Added support for setting per-agent log-level and log secure values in amvil.conf. * Moved the check for an agent being disabled into ScanCore->agent_startup() Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago
Digimer	3674a47179	WIP - Working a tool to manually load updated server definition files. Signed-off-by: Digimer <digimer@alteeve.ca>	3 years ago

... 51 52 53 54 55 ...

4176 Commits (9f888fbe278d760baad49232225f09207fe990c2) All Branches Search

4176 Commits (9f888fbe278d760baad49232225f09207fe990c2)

All Branches