* Reworked where and how Database->configure_pgsql() is called, and boosted logging around it (trying to debug a build test issues).
* Updated Database->configure_pgsql() to only check if the Anvil! user and DB exists if another step of the config happened.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->_age_out_data() to check for certain scan agent tables and, for those found, purge out old records. This should go a long way to keeping the database data responsive.
* Fixed a bug in Jobs->update_progress() where the 'job_picked_up_by' column was being set to '0' instead of '$$' when clearing the job.
* Fixed a bug in System->update_hosts() where '127.0.0.1' would be used in hosts for the actual host name.
* Updated the default trigger, count and division values in anvil.conf to 100,000, 50,000 and 75,000 respectively. In combination with the aging of data, this should go a long way to minimizing database sizes and overheads.
* Updated anvil-daemon to call $anvil->Database->_age_out_data(); in it's daily tasks.
* Updated various striker-X tools to specifically request a DB resync on Database->connect calls.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->_age_out_data() to delete records from the database that are old enough to no longer be useful. This is designed to significantly reduce the size of the database, allowing a better focus on performance.
* Changed Database->connect() to default to NOT check for resync, reworking the old 'no_resync' to 'check_for_resync', so that resync checks happen on demard, instead of by default.
* Updated get_tables_from_schema() to now allow 'schema_file' to be set to 'all', which then loads the schema files of all scan agents as well as the core anvil schema file. Fixed a bug where commented out tables were being counted.
* Re-enabled triggering resyncs on 'last_updated' differences.
* Fixed a bug in scan-ipmitool where the history_id column in history.scan_ipmitool_value was incorrect.
* Created a new tool called striker-show-db-counts that shows the number of records in all public and history schema tables for all databases.
* Updated anvil-update-states to detect when a libvirtd NAT'ed bridge exists and to delete it when found.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Removed the checks for resync that limited resyncs on jobs and variables tables. That approach to minimize unnecessary resyncshas proven faulty, will find another way later.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Cluster->parse_quorum() to check if a node is quorate as 'have-quorum' in the pacemaker CIB doesn't appear to be super accurate during startup.
* Fixed a bug in striker-manage-install-target where if a node didn't have any registered IPs, it would break before generating the repo data.
* Fixed a bug in anvil-join-anvil where if the database had to be reconnected, the job data was lost.
Signed-off-by: Digimer <digimer@alteeve.ca>
* This commit includes two unrelated test files for UI work, cgi-bin/get_anvil_status and cgi-bin/get_anvils.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated pxe.txt to start support for UEFI boot target.
* Updated update_install_source to be smarter about moving html and tftp directory names to better reflect the host OS, and to make it support converting OSes on the fly. Also added support to the package list for CentOS Stream.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->get_power() that loads data from the special 'power' table.
* Fixed a bug in calls to Network->ping() where some weren't formatted properly for receiving two string variables.
* Updated Database->get_anvils() to record the machine types when recording host information.
* Updated Database->get_hosts_info() to also load the 'host_ipmi' column.
* Updated Database->get_upses() to store the link to the 'power' -> 'power_uuid', when available.
* Created ScanCore->call_scan_agents() that does the work of actually calling scan agents, moving the logic out from the scancore daemon.
* Created ScanCore->check_power() that takes a host and the anvil it is in and returns if it's on batteries or not. If it is, the time on batteries and estimate hold-up time is returned. If not, the highest charge percentage is returned.
* Created ScanCore->post_scan_analysis() that is a wrapper for calling the new ->post_scan_analysis_dr(), ->post_scan_analysis_node() and ->post_scan_analysis_striker(). Of which, _dr and _node are still empty, but _striker is complete.
** ->post_scan_analysis_striker() is complete. It now boots a node after a power loss if the UPSes powering it are OK (at least one has mains power, and the main-powered UPS(es) have reached the minimum charge percentage). If it's thermal, IPMI is called and so long as at least one thermal sensor is found and it/they are all OK, it is booted. For now, M2's thermal reboot delay logic hasn't been replicated, as it added a lot of complexity and didn't prove practically useful.
* Created System->collect_ipmi_data() and moved 'scan_ipmitool's ipmitool call and parse into that method. This was done to allow ScanCore->post_scan_analysis_striker() to also call IPMI on a remote machine during thermal down events without reimplementing the logic.
* Updated scan-ipmitool to only record temperature data for data collected locally. Also renamed 'machine' variables and hash keys to 'host_name' to clarify what is being stored.
* Updated scancore to clear the 'system::stop_reason' variable.
* Added missing packages to striker-manage-install-target.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_temperature() to accespt a 'delete' parameter (which, surprise, deletes a record).
* Updated (but not yet tested) the RPM .spec to require that 'core' and the other three packages are required to be the same version.
* Updated scan-ipmitool and scan-storcli scan agents to now delete temperature data belonging to lost sensors.
* Fixed tools/striker-manage-install-target to add multiple missing packages.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug if Get->free_memory() where host_type was still being called from the old System->host_type method.
* Added global support for '--log-secure' and '--log-db' switches to enable logging of secure data and DB transactions, respectively.
* Created Database->get_tables_from_schema() that parses a SQL schema file and returns an array reference of tables found, in the order they were found.
* Updated ScanCore->agent_startup() to no longer require manually defining database tables, using Database->get_tables_from_schema() when not manually set.. Updated all existing agents to use this.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Get->os_type() to work on local and remote hosts.
* Fixed a but in tools/striker-initialize-host where calls to Network->find_matches() where being checked properly for success/failure.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_power() where the check to see if 'power_ups_uuid' was passed in was reversed. Also fixed a bug where the convertion of the value to TRUE/FALSE for the old value wasn't being set correctly.
* Updated Server->get_definition() to only translate the host name to a uuid if the host uuid wasn't passed in. Added a sanity check on the UUID as well.
* Cleaned up how existing UPSes are displayed in Striker when managing UPSes. Also renamed the form's scan agents to match the real agent names.
* Fixed alert sorting in scan-apc-pdu.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed scan-storage to scan-lvm as we only really care about LVM data in this agent. A dedicated scan-drbd will be created later. Got the agent to parse the pvs/vgs/lvs data.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created 'Cluster->which_node' that returns 'node1' or 'node2' to indicate which node a host is.
* Continued working on scan_cluster; decided to make it not host-dependent.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the fix from the last commit for System->call to handle returned data without an ending newline to Remote->call.
* Got more work done on System->update_hosts(). It's able to add new hosts, but misses the short and FQDN host names. Need to fix that and the verify existing / manual entries aren't molested.
Signed-off-by: digimer <digimer@pulsar.alteeve.com>
* Added the fix from the last commit for System->call to handle returned data without an ending newline to Remote->call.
* Got more work done on System->update_hosts(). It's able to add new hosts, but misses the short and FQDN host names. Need to fix that and the verify existing / manual entries aren't molested.
Signed-off-by: digimer <digimer@pulsar.alteeve.com>
* Update striker manifest run to add an entry into the 'anvils' table, and pass the anvil_uuid to the jobs rather than the various host_uuid's.
* Fixed a bug in the 'anvils' SQL procedure that copied data into the history schema (a few columns were missing).
* Updated anvil-configure-host to reboot when finished to be certain network changes have taken effect. Also updated the handling of virsh bridges to delete the autostart symlinks if libvirtd daemon isn't running.
* Added some logic to anvil-daemon to call 'anvil-update-states' with the -v{1,3} flag depending on the active debug level.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated 'variables' -> 'variable_source_uuid' to type 'uuid' and removed the 'not null' constraint.
* Updated Database->insert_or_update_variables() to check/update 'variables_source_table' and 'variables_source_uuid'.
* Created the 'trusts' database table which will, when done, tell anvil-daemon which users@machines to trust (setup passwordkess SSH).
* Created (but not finished) System->manage_authorized_keys() and moved the logic over to it from anvil-daemon.
* Changed the host types "dashboard" to "striker".
* Moved the following methods from 'System' to 'Get';
** System->get_host_type to Get->host_type
** System->get_bridges to Get->bridges
** System->get_free_memory to Get->free_memory
** System->get_os_type to Get->os_type
** System->get_uptime to Get->uptime
* Updated striker to include the host_uuid for the 'node1', 'node2' and (if chosen) 'dr1' when running a job manifest.
Signed-off-by: Digimer <digimer@alteeve.ca>
** Needed to add a couple more packages to CentOS's package list.
** Changed the PXE kickstart template to create a dedicated '/boot' partition (raw partition or on RAID 1). This seems to be required now on 8.1.
** Added PXE's UEFI support to the template system (untested, but it's at least generated now).
* Filtered out 'debug' and 'verbose' options when configuring fence devices.
* Added an internet test to tools/striker-manage-install-target and skipped attempting to download packages when there's no internet. Also made loading the host OS info into a small function.
* Started creating the man pages.
Signed-off-by: Madison Kelly <mkelly@alteeve.ca>
* Added fonts to Striker's RPM list and to the anvil-striker RPM dependency list so that the terminal is actually useful.
Signed-off-by: Madison Kelly <digimer@neutron.digimer.ca>
* Fixed a bug in Database->insert_or_update_variables() where, if 'update_value_only' was set but not variable_uuid was passed or could be found, an (incomplete) INSERT would be attempted.
* Added support for generating module metadata when setting up local repos on Striker.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->get_hosts_info() (though it's not at all finished) that will write out a unified JSON file contain all data known about all hosts/Anvil! systems. This will be later used to create the WebUI parts.
* Also created, but also not finished, Network->load_interfces() that will work sort of like ->load_ups, but include all interfaces regardless of if they have an IP or not.
* Fixed a bug where the new bridge_interface_note parameter didn't exist in the Database->insert_or_update_bridge_interfaces() method.
* Updated anvil-update-states() to only write out the JSON/XML files if it's running on a dashboard. For nodes and DR hosts, it just needs to update the database.
* Created a new hook in anvil-daemon that will call tasks on a machine that is configured.
* As per RHEL 8.1 release notes, changed the package 'dnf-utils' to 'yum-utils' in the packages to load for install target repos.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated striker-scan-network to only run once per day unless --force or a given --network is used. This avoids repeated scans when the anvil-daemon restarts frequently for whatever reason.
* Fixed (for real this time) Convert->time's handling of the 'long' parameter.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished the detection of and handling of initialization of a host when the host has no Internet access.
* Disabled (for now) anvil-daemon's check_ssh_keys function.
* Fixed a couple small bugs elsewhere.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated System->host_name to work locally and on remote targets.
* Renamed all 'hostname' instances to 'host_name' to standardize on a spelling throughout the program.
* Removed use of and dependency on 'hostname'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Get->host_uuid() where the call to get the host UUID from dmidecode was broken.
* Updated striker -> Initialize host to allow the user to set the host name of a node or host being initialized, allowing it to be registered with Red Hat under the proper name and make it easier to track which machine is which during initial Anvil! build.
* Fixed a few minor bugs with variable insertions into translated strings.
* Updated striker-initialize-host to use a progressive progress value rather than statically assigned steps.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Tools->refresh to reload anvil.conf in one call.
* Created Anvil::Tools::Network to hold network-related tasks.
** Created Network->is_remote() that tests to see if a string (containing a target) refers to the remote machine (versus a local machine). Updated all previous checks to use this new method.
** Moved Get->network_details() and Get->network() to the new Network module. Renamed Get->network() to Network->get_network().
** Made Network->get_ips() work locally and remotely.
** Created Network->find_matches() that compares two scanned machines IPs (via two previous calls to Network->get_ips())
* Created Database->manage_anvil_conf() that will add, update or remove a given database connection in a local or remote anvil.conf file.
* Fixed bugs in Storage->backup() where the bash calls were quite broken. I'm not sure how it ever worked before... x_x
* Updated anvil-daemon to not initialize a database unless it's running on dashboard. Also added a check at the startup of anvil-daemon where it will go into a loop waiting for a database to become available, re-reading anvil.conf each loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Remote->call where a shell call that ended in a newline would work, but throw an error and not get the return code.
* Created Database->get_job_details() which takes a job_uuid and returns the job details, if found.
* Fixed a bug in Jobs->update_progress() where 'clear' wasn't removing the old job_progress data.
* Added the parameters 'no_files' to skip stat'ing/recording non-directories, and 'search_for' which will set the parent directory in 'scan::searched' and stop scanning if found. This allows this method to act as a directory tree scanner and as a search engine.
* Created Striker->get_local_repo() that builds a repo file body suitable for adding to peers, nodes and DR hosts.
* Fixed bugs in the Striker WebUI related to initializing a target node / DR host.
Signed-off-by: Digimer <digimer@alteeve.ca>
Digimer
Fabio M. Di Nitto
Madison Kelly
digimer
Madison Kelly