* Updated DRBD->manage_resource() to set allow-two-primaries=no when up'ing a resource (as no migration can be in progress during an up command).
* Updated scan-drbd to look for StandAlone resources and call DRBD->manage_resource({task = 'up'}) if a connection to a peer node is StandAlone or if the local disk state is detached.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated DRBD->delete_resource() to call scan-drbd and scan-lvm to ensure that the database is updated with the newly freed resources.
* Updated anvil-delete-server and anvil-provision-server to call select scan agents to ensure freed resources are immediately recorded.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated Cluster->recover_server() to set the desired recovery state before calling the crm_resource refresh.
Signed-off-by: digimer <mkelly@alteeve.ca>
* In DRBD->get_next_resource(), implemented a "hold" system where the DRBD minor and TCP port(s) returned are marked as being held for one minute. So subsequent calls won't use the same numbers.
* In anvil-daemon, added a check in run_jobs() where only one instance of a given job command will be started per 2-second loop. This should help reduce the chance of simultaneous race confitions in general.
* Removed from anvil-provision-server and most other tools the call to Job->get_job_uuid(). If the program is called without the job_uuid, don't try to find it. This allows a human (or script) to make repeated calls to a program without one of those calls running a pending job instead.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated (not not yet completed) scan-cluster's check_resources() function to check if a FAILED server is ready to try to recover.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a bug where servers protected by DR hosts aren't deleted when the server itself is deleted.
* Updated DRBD->delete_resource() to remove the server's XML file if the host is a DR host.
* Updated anvil-version-change and anvil.sql to enable update_audits and the audits table.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a bug in Database->get_storage_group_data() to load hosts data when needed. Also fixed a bug where new members didn't return the new storage_group_member_uuid.
* Updated anvil-manage-host to use the new switch handler.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated the storage_group_members table to add the 'storage_group_member_note' that can be set to 'DELETED' to track when a member is deleted. Updated anvil-version-changes to check for and add this column as needed. Updated the anvil.sql schema for the same.
* Updated Cluster->insert_or_update_storage_group_members to add the new column.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added call to System->configure_logind() to anvil-join-anvil and anvil-version-changes.
* Updated fence_pacemaker to add '--reboot' to the 'stonith_admin' call to ensure DRBD-triggered fence requests reboot instead of just turning nodes off.
This commit address issue #279.
Signed-off-by: digimer <digimer@gravitar.alteeve.com>
* In Cluster->parse_cib(), added parsers for node attributes and resource rules. Also stored the existence of and details of each under the server resources for easier referencing.
* Updated scan-server to check for / add DRBD fence rules as needed.
Scancore APC agent bugs;
* For clarity, converted all '#!no_value!#' and '#!no_connection!#' to use '!!' instead in APC scan agents.
* Fixed a bug to set/clear alerts related to phases disappearing to deal with concurrent logins from different hosts triggering false phase loss alerts.
* Fixed missing variables not being passed to alerts/log entries.
Started more work on anvil-manage-server, but on hold again while the DRBD fencing work is completed.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Get->anvil_from_switch and Get->server_from_switch() (both need testing) that takes a string that could be either a name or UUID, figures out which it is, finds the entry in the DB and started the X_uuid and X_name switch variables.
* Started work on a second attempt at anvil-manage-server.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in System->parse_arguments() where a quoted password without spaces was returned without being recorded in the hash. Also updated logging to log 'suppressed' for passwords when secure logging is disabled.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Cluster->parse_cib() where the local machine's ready state was being set to the node name.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated DRBD->allow_two_primaries() to take the 'set_to' parameter which can be 'yes' to all and 'no' to disallow dual-primary.
* Updated ocf:alteeve:server to call allow_two_primaries() with 'set_to' = 'no' instead of calling 'adjust' after a migration completes.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated scan-cluster to check / set which node should be preferred if a netsplit causes a fence race.
* Fixed a bug in Server->shutdown_virsh() where a shutdown timeout would go into a loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->archive_table() and ->_find_behind_databases() to loop through connected databases, instead of configured databases.
* Updated Network->get_ips() to only record the real MAC addresses on network interfaces (not bonds or bridges) in the "network::${host}::interface::${in_iface}::mac_address" hash. This should help avoid reboot loops caused by anvil-configure-host thinking the network needs to be reconfigured when it doesn't actually need to be.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Cluster->parse_cib() to not require a database connection (part of the work to make ocf:alteeve:server run without a DB)
* WIP: Continuing work on the ocf:alteeve:server RA to run without database connections.
* Updated the scancore daemon to explcitely check that all scan agent schemas are loaded in all databases on startup. This is to resolve resync issues on rebuilt strikers that may not yet have some schemas loaded when a DB resync runs.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Changed the alteeve repo RPM to the new cimmunity/enterprise repo
* Fixed a bug where 'fence_data::updated' was causing the fences web page to break.
* Fixed a bug in Database->insert_or_update_network_interfaces() where certain interfaces were being repeatedly added to the database.
* Fixed a bug in Database->_find_behind_databases() was marking DBs as behind even though they had less than 10 columns off.
* Fixed a bug in Get->host_name() where, if the host name was changed on disk but the environment variable was still the old name, it would cause the hostname to waffle back and forth and cause constant updated to /etc/hosts.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Cluster->check_stonith_config() that checks and, if needed, reconfigures a cluster's fencing (stonith) config.
* Updated scan-cluster to call Cluster->check_stonith_config() at the end of each call.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Cluster->get_fence_methods() that parses all fence methods out of a recorded CIB and stores the in a hash for a given host_uuid.
* Fixed a bug in ScanCore->post_scan_analysis_striker() where the short_host_name was not being stored correctly.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created DRBD->check_if_syncsource() and ->check_if_synctarget() that return '1' if the target host is currently SyncSource or SyncTarget for any resource, respectively.
* Updated DRBD->update_global_common() to return the unified-format diff if any changes were made to global-common.conf.
* Created ScanCore->check_health() that returns the health score for a host. Created ->count_servers() that returns the number of servers on a host, how much RAM is used by those servers and, if available, the estimated migration time of the servers. Updated ->check_temperature() to set/clear/return the time that a host has been in a warning or critical temperature state.
* Finished ScanCore->post_scan_analysis_node()!!! It certainly has bugs, and much testing is needed, but the logic is all in place! Oh what a slog that was... It should be far more intelligent than M2 though, once flushed out and tested.
* Created Server->active_migrations() that returns '1' if any servers are in a migration on an Anvil! system. Updated ->migrate_virsh() to record how long a migration took in the "server::migration_duration" variable, which is averaged by ScanCore->count_servers() to estimate migration times.
* Updated scan-drbd to check/update the global-common.conf file's config at the end of a scan.
* Updated ScanCore itself to not scan when in maintenance mode. Also updated it to call 'anvil-safe-start' when ScanCore starts, so long as it is within ten minutes of the host booting.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where, in rare cases, $anvil->hostname() would call 'hostnamectl' and get a dbus error during shutdown, which would then cause the hostname to be changed to the error in the database.
* Fixed a bug in Cluster->boot_server() where it would never verify that a server has started successfully.
* Updated Database->get_ip_addresses() to store the IPs we manage in 'ip_addresses::<ip_address_address>::X'.
* Updated ocf:alteeve:server to work from command line calls, though more testing is still needed.
* Started work on 'anvil-rename-server', but haven't gotten far with it yet.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Turned on print to console for logging in anvil-provision-server. Also updated it to check if the cluster is running and hold until it is.
* Cleaned up some code in Get->available_resources() that proved hard to debug.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Cluster->parse_quorum() to check if a node is quorate as 'have-quorum' in the pacemaker CIB doesn't appear to be super accurate during startup.
* Fixed a bug in striker-manage-install-target where if a node didn't have any registered IPs, it would break before generating the repo data.
* Fixed a bug in anvil-join-anvil where if the database had to be reconnected, the job data was lost.
Signed-off-by: Digimer <digimer@alteeve.ca>
* The get_mmeory endpoint was completed.
* The get_replicated_storage endpoint was completed, though it requires testing and likely has issues.
To prepare for the get_status endpoint work, I needed to update ScanCore and modules to track the host_status. This commit contains the work needed for this.
* Updated ScanCore->post_scan_analysis_striker() to use configured fence devices (except PDUs) to check if a target host is off or on, in there is no host_ipmi interface. In all cases, if a machine can be confirmed on or off, the host_status is now updated.
* To support the above fence based power checks, updated scan-cluster to store the on-disk CIB in the new scan_cluster -> scan_cluster_cib colume.
* Updated ScanCore->parse_cib() to map stonith primitive IDs to fence agents. Updated ->parse_crm_mon() to not call if the executable doesn't exist to avoid unhelpful error messages in the logs when called from a Striker.
* Update DRBD->gather_data() to get the size data from /sys/block/drbd<minor>/size' x '/sys/block/drbd<minor>/queue/logical_block_size so it works when a device is Secondary (and can't be promoted).
* Updated Database->get_hosts_info() to record the short host name as well as the stored host name. Created ->update_host_status() as a wrapper to ->insert_or_update_hosts() that only updates the host status.
* Updated anvil-join-anvil to disabled ksm and ksmtuned daemons.
* Updated scancore and anvil-daemon to set the host_status to 'online' on startup.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_storage_group_members() to use the host_uuid when trying to find existing members.
* Added the skeleton of a bunch of new json endpoints for the new UI features.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Reworked DRBD->get_next_resource() to pull from the database, and to no longer do that increments-of-three nonsense. Avoidable complexity. Also added a call to Cluster->get_anvil_uuid() if the 'anvil_uuid' parameter wasn't passed.
* Updated Database->get_host_from_uuid() and ->get_hosts() to now take 'include_deleted' parameter and default to not returning deleted hosts. This fixed issues where anvil-{delete,provision}-server calls could assign jobs to now-deleted hosts with reused host names.
* Updated anvil-delete-server to print log entries to STDOUT. Also updated it to not wait of shutdown of a server in pacemaker to complete, and instead to destroy it after calling pacemaker's resource stop. Updated to also check to see if the server being deleted is already out of pacemaker and, if so, skip that step and directly try to destroy the server, if it's running.
* Updated anvil-provision-server to force 'peer_mode' runs to pull their TCP Port and DRBD minor numbers from the job. This fixes a bug where the same resource on two machines could use different TCP ports.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Reworked DRBD->get_next_resource() to pull from the database, and to no longer do that increments-of-three nonsense. Avoidable complexity. Also added a call to Cluster->get_anvil_uuid() if the 'anvil_uuid' parameter wasn't passed.
* Updated Database->get_host_from_uuid() and ->get_hosts() to now take 'include_deleted' parameter and default to not returning deleted hosts. This fixed issues where anvil-{delete,provision}-server calls could assign jobs to now-deleted hosts with reused host names.
* Updated anvil-delete-server to print log entries to STDOUT. Also updated it to not wait of shutdown of a server in pacemaker to complete, and instead to destroy it after calling pacemaker's resource stop. Updated to also check to see if the server being deleted is already out of pacemaker and, if so, skip that step and directly try to destroy the server, if it's running.
* Updated anvil-provision-server to force 'peer_mode' runs to pull their TCP Port and DRBD minor numbers from the job. This fixes a bug where the same resource on two machines could use different TCP ports.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Cluster->add_server() to now set failure timeouts to actual numbers instead of INFINITY after discovering that INFINITY doesn't work in those cases.
* Updated Databsae->get_hosts to now check if other entries have the same host name, and if so, to set their host_key to 'DELETED'. This should make it easier to handle when a hardware machine is replaced by new hardware but uses the same host_name.
* Updated Email->check_queue() to start and enable postfix.service if it's found to not be running.
* Updated Get->available_resources() to return '!!no_data!!' when a given host hasn't got any data in scan_lvm_vgs. Now use this in anvil-provision-server to exit if a node or dr host hasn't run scancore yet.
* Fixed a bug in scan-lvm where the pvs_uuid wasn't being loaded properly, preventing lost PVs, VGs and LVs from being flagged as deleted.
* Started work on anvil-migate-server, though it's far from complete.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Cluster->shutdown_server() where the wrong variable was being evaluated when checking the server state.
* Created DRBD->delete_resource() that deletes a resource's backing device and configuration. Note that this wipes the DRBD MD and and FS signatures before removing the LV. Updated DRBD->gather_data() to record the backing devices for volumes.
Signed-off-by: Digimer <digimer@alteeve.ca>
digimer
digimer
Digimer
Tsu-ba-me