* Updated the RPM to .13 to disable postun's disabling of postgres, which breaks Anvil! software using the database during RPM updates.
* Fixed a logging bug where the number of DB connections was not inserting the number properly.
* Fixed exits in tools/anvil-prep-database.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started adding support for updating the striker (and later, all) systems. This will be handled by the in-progress tools/anvil-update-system program.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got anvil-manage-striker-peers working properly (so far).
* Updated anvil-prep-database to call anvil-manage-striker-peers, but testing still needed.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Update Anvil::Tools->new() to access the parameters 'log_level', 'log_secure' and 'debug', streamlining the frequent calls to $anvil->Log->level and ->secure in program startup, and allowing the values to take effect during the ->new constructor.
* Passed 'debug' to child method calls in more places (still more to do though).
* Fixed a bug where 'test_table' wasn't set in the right place, causing the database to try to initialize repeatedly.
* Made Database->archive_database only run if called with root access.
* Now the number of database connections are stored in 'sys::db_connections' instead of checking the returned number, and that is cleared on disconnect.
* Started working more on 'anvil-daemon', including adding support for System->call being taking 'background', 'stderr_file' and 'stdout_file' paramters which, when set, used Proc::Simple to background the process.
* Did some more work on database archiving, though still far from done.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where "form::error_massage" was default to ' ' which caused simple checks to thing there was an error when all was fine.
* Got the "add new sync peer" form confirmation box displaying and cleaned up the CSS a bit.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Get->users_home() to default to return the hore directory for the user running the program.
* Updated Remote->call() to start working on handling timeouts.
* Updated Storage->change_owner(), ->make_directory() and ->write_file() to default the the user and group running the program.
* Fixed a bug in home reporting the MAC address of NICs when confirming configuration of Striker. Also changed showing the domain to the hostname.
* Got more work done on sync peers.
* Updated the RPM spec file to install on Fedora 28.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Set Log->entry to chmod the log file to 666 when the file is opened to ensure apache can write to it.
* Fixed a string replacement variable name.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added another check and better error handling to Template->get() to print a more useful message if a template is found but fails to parse.
* Moved some strings into the words file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Moved templates around different files to clean things up.
* Moved the "back" and "refresh" icons over to the right by the logo, and added a new icon for handling mail, alerts, install targets and manifests.
* Started work on the Striker configuration sub-page.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where the old style '#!replace!...!#' replacement variables were not being escaped when processing variable insertions into strings.
* Made the body variable be stored in 'form::body' instead of passing around the '$body' variable.
* Created a set of new icons.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added error messages to Striker configuration forms.
* Fixed a bug in home->get_network_details() function to handle single IPs in network.xml.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed tools/anvil-configure-network to tools/anvil-configure-striker given that it will also now update system passwords.
* Started working on tools/anvil-update-states to properly handle a Striker with already-configured networking.
* Cleaned up tools/anvil-change-password.
* Fixed a bug in Storage->update_config to set the ownership of anvil.conf to 'apache:apache' so that the web server can read it.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added user_algorithm and user_hash_count to the new users database table so that we can remember how a hash was generated, should it be changed down the road.
* Made the salt length configurable by the user (as well as the algorithm and loop count).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Changed 'database:❌:...' so that 'x' is now the database host's UUID instead of a simple integer. This will simplify sync'ing configs. Also removed default entries, and made it so that anvil-prep-database injects the local config during first setup. Renamed Database->get_local_id to get_local_uuid and changed the 'id' parameter to 'uuid'. Changed Database->initialize's 'id' parameter to 'host_uuid'. The Database->query, Database->write, Database->_mark_database_as_behind and Database->_find_behind_databases methods had their 'id' parameter changed to 'uuid'.
* Added the 'remote_user' parameter to Get->anvil_version, System->ping and System->change_shell_user_password for conencting to remote targets.
* Added the 'remote_user' parameter to all internal Remote->call uses.
* Updated Storage->backup, Storage->copy_file, Storage->make_directory,
Signed-off-by: Digimer <digimer@alteeve.ca>
* Made logging between journald and a traditional file configurable via 'sys::log_file'. Also made the file handle unbuffered when logging to a file.
* Fixed a bug with loading the anvil.conf config file in a few locations.
* Created System->stty_echo() to handle enabling/disabling shell echo, and added restoring the echo to Tools->catch_sig.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug with handling ssh fingerprints (and removed comments going to the known_hosts file).
* Added more nested debug parameter passing when methods call other methods (though more work is needed to catch up)
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Storage->read_file and Storage->write_file to support reading and writing on remote systems (untested though)
* Created System->change_shell_user_password() that changes a shell user's password by manually generating an sha512 salted hash of the given password and uses the resulting hash to modify the target user's password, so the password should never be visible in the process list. Works on both local and remote systems, though it still needs testing.
* Created Storage->rsync() to handle moving files between the local and a remote system.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where some '$anvil->{}' variables should have been '$anvil->data->{}'.
* Started merging message keys on 'error_xxxx', 'warning_xxxx', etc.
* The anvil-configure-network now configures the network. Commented out, the tool can reconfigure the entire network without a reboot, but a current issue with the post-configured system refusing to use the allocated interface as the default gateway is to be reviewed at a future time. For now, a closing reboot will be issued.
* Started creating 'anvil-change-password' that will update passwords, including apache (and configure .htpasswd when needed).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got anvil-configure-network writing out the new network config properly, but renaming already-active interfaces isn't working yet.
* Updated System->get_ips() to record the interface name of a given network by MAC address using 'sys::mac::<mac_address>::iface'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got anvil-configure-network setting the new hostname.
* Updated anvil-configure-network to exit only if the job was picked up by a still-running PID.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed some logging in Get->cgi() and generally cleaned up logging levels.
* Got striker to the point where the job to reconfigure the network is saved in the database and the dashboard goes offline until it is done.
* Created the start of the new anvil-configure-network tool.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'file' and 'line' arguments to the Database->insert_or_update_X methods to allow for the original caller's file and line number to be recorded in the SQL call logs.
* Cleaned up how logging to 'anvil.log' logging is handled.
* Updated anvil-update-states to ignore libvirt bridges and to manually set the speed and duplex of virtio network based interfaces.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug with resync, but others remain as resync is incomplete (at least for network_interfaces).
* Currently, tools/anvil-update-states is broken while working on the above issue.
* Reworked the jobs table and removed the units/anvil-jobs.service unit. Jobs will be invoked and backgrounded in all calls.
* Started adding missing hidden form fields.
* Updated the 'server' OCF resource agent version and metadata.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added Get->anvil_version() to check the local or remote Anvil! version.
* Added a check in Database->connect() to see if a database server's Anvil! version matches the local version. If the versions don't match, the database is not used.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the 'debug' parameter to System->call(). Also added a check to make sure that the called executable exists.
* Added the 'debug' parameter to System->start_daemon().
Signed-off-by: Digimer <digimer@alteeve.ca>
* Moved all executables to /usr/sbin/
* Made /root/anvil-backups/ the backup directory.
* Started debuging anvil-prep-database
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed display issues when showing a summary of what will be done if the user confirms the reconfiguration of the Striker.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Storage->record_md5sums() and Storage->check_md5sums for use in daemons. These will record the md5sums of the program itself, all perl modules and the words file. When check_md5sums is called, it returns '1' if any sums have changed, which daemons can trigger on to exit (and systemd will restart them). Removed the basic md5sum check from anvil-daemon and switched to this.
* Fixed how 'fatalstobrowsers' is invoked so that it only applies to programs running in a browser.
Signed-off-by: Digimer <digimer@alteeve.ca>
We've decided to give up on trying to keep ScanCore, AN::Tools and Striker as three separate things. We had originally hoped to make ScanCore easily separatable from the Anvil!, but this was adding increasing complexity to the project and complexity is the enemy of reliability.
In this release, AN::Tools becomes Anvil::Tools, all configuration files move to /etc/anvil and all programs and data files move to /usr/sbin/anvil. Words files are now merged, as are SQL schemas (ScanCore agents will still maintain their own, later). The journald tag has changed from 'an-tools' to 'anvil'.
Other changes;
* Tools.t has been updated to handle existing tests. New methods and parameters still need to have tests added though.
* Added a simple test.pl script used for testing things outside the main program. It will be removed before final release.
* Added the simple 'watch_logs' bash script to more easily tail output.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started using Time::HiRes and recording the run time of programs using AN::Tools at log level 2.
* Added a check in tools/an-prep-database to write journald.conf.d/an.conf to disable rate limiting to allow high log levels without losing messages.
Signed-off-by: Digimer <digimer@alteeve.ca>
Digimer