* Got anvil-manage-alerts managing alert overrides.
* Created, but for now commented out, the new 'audit' table.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Disabled striker-parse-oui until it can be reworked to store the the OUI data in a flat file instead of in the database.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-boot-server when called with '--all' to honour boot ordering, delays and condtions.
* Updated Database->get_servers() to collect the server's XML as well as data from the 'servers' table.
* Updated anvil-provision-server to make a new DRBD resource 'secondary' after forcing it to primary to begin the initial sync.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated scan-drbd to purge peer records that no longer have corresponding LVM data.
* Updated System->{en,dis}able-service to take the 'now' paramter which, when passed, causes the action to take immediate effect.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->get_host_from_uuid() to cache results.
* Fixed a bug in Database->get_storage_group_data where a DELETE wasn't deleting from the history schema as well.
* In Database->resync_databases(), references to the old 'host_uuid' that we used to use to resync just the local host's data was removed. Added also a check where two or more entries in a given history schema had the same modified_date and, when found, the newest entry is preserved and the rest are deleted. Before this, a resync where two+ records had the same modified_time would only sync the last record, leaving a mismatch in history schema entries triggering repeated resyncs.
* Fixed a bug in Email->send_alerts() where the 'alerts' table was being updated without a modified_date being set.
* Fixed a bug in System->test_ipmi() where the 'hosts' table was being updated without a modified_date being set.
* Updated scan-network to clear up old deleted ip_addresses, bonds and bridges. Also fixed bugs where public schema records were being deleted without history records being deleted.
* Updated anvil-update-states to fix bugs where DELETEs were happening without setting the modified_date.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Network->load_ips() to load extra information about the interfaces.
* Updated ocf:alteeve:server to not check libvirtd daemon state on server start.
* Updated scan-hardware to check for duplicate entries and purge if found.
* Updated scan-network to check for the 'default' virbr0 interface by checking if the config file exists instead of calling virsh.
* Updated scan-server to have better logging.
* Created the new (and incomplete) anvil-test-alerts tool
* Updated scancore to support --purge to pass to all agents and then exit.
* Updated ScanCore->call_scan_agents() to no longer use 'timeout' as it was causing issues with virsh calls.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Also removed the variables for the database name and DB user name, setting them statically now.
* Created Database->shutdown() to more kindly stop a local database server.
* Added 'check_db_in_use_states()' to anvil-daemon to clean any stale entries marking a database as in use.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-daemon to check for files in /mnt/shared/incoming on striker dashboards and add them to the media library if needed.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Network->is_our_interface() which returns '1' if an interface is one managed by an Anvil!. Also updated scan-network to use this to determine when an interface alert should be a warning or notice level alert.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated scan-filesystems to set swap usage alerts to notice level only.
* Updated scan-network to pull the permanent MAC address from an 'ethtool -P <iface>' call to deal with the fact that wireless interfaces don't have their real MAC in the sysfs address file.
* Updated anvil-provision-server to set the rtc_tickpolicy to catchup.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->backup_database() that creates a pg_dump of the active database.
* Created Database->load_database() that loads the database from a flat file, optionally creating a backup before doing so, and using iptables to block access during the process.
* Updated Database->configure_pgsql() to not start the postgresql daemon unless it just initialized the DB.
* Much work, not yet complete, to Database->connect() to stop after the first successful connection. Added logic that, if not connection was established and the host is a Striker, to load a peer's backup, if it exists, and then start the local daemon.
* Updated anvil-daemon to now have a section to run tasks on a ten minute cycle, which will later be used for the primary Striker to dump / copy its database to peer(s).
Signed-off-by: Madison Kelly <mkelly@alteeve.ca>
* Got anvil-manage-dr to the point where it writes the updated resource configuration to enable DR support. (untexted)
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Alert-register so that, if 'sort_position' is not set (or set to 9999), an internal counter for each alert level is created and used so that alert entries sort naturally by the order they're registered.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Changed the alteeve repo RPM to the new cimmunity/enterprise repo
* Fixed a bug where 'fence_data::updated' was causing the fences web page to break.
* Fixed a bug in Database->insert_or_update_network_interfaces() where certain interfaces were being repeatedly added to the database.
* Fixed a bug in Database->_find_behind_databases() was marking DBs as behind even though they had less than 10 columns off.
* Fixed a bug in Get->host_name() where, if the host name was changed on disk but the environment variable was still the old name, it would cause the hostname to waffle back and forth and cause constant updated to /etc/hosts.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->get_tables_from_schema where history.X and X tables were being stored in the table list.
* Updated ocf:alteeve:server to no do resyncs on DB connect.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->find_host_uuid_columns() and ->_find_column() to create a list of tables and column names in the proper order to allow deletion of foreign keys to that deeply nested primary keys can be deleted. Specifically, this was meant for hosts -> host_uuid and anvils -> anvil_uuid, though it should work for other tables.
* Updated html/jquery-ui-1.12.1/package.json to address CVE-2020-7729
* Fixed a bug in the temperature table's history procedure where temperature_weight wasn't being copied.
* Updated anvil-provision-server to support '--anvil' that can take either the anvil-uuid or anvil-name.
* Updated anvil-safe-stop to default the stop-reason to 'user'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a new parameter to Database->connect() called 'no_resync' that, if set, prevents a resync check being performed. Updated ->resync_databases() to find a uuid_column where the table name ends in 'ies' and the UUID column is 'y_uuid'. Updated ->resync_databases() to not fire on updated table age anymore, and to trigger only if the number of rows differ in a given table by more than 10.
* Updated Log->entry() to prefix a tool's name, when the new 'log::scan_agent' value is set. Also set this value in ScanCore->agent_startup(), to help differentiate log entries.
* Fixed a bug in scancore's main loop where it logged the sleep message at the start of the run.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Cluster->check_stonith_config() that checks and, if needed, reconfigures a cluster's fencing (stonith) config.
* Updated scan-cluster to call Cluster->check_stonith_config() at the end of each call.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created DRBD->check_if_syncsource() and ->check_if_synctarget() that return '1' if the target host is currently SyncSource or SyncTarget for any resource, respectively.
* Updated DRBD->update_global_common() to return the unified-format diff if any changes were made to global-common.conf.
* Created ScanCore->check_health() that returns the health score for a host. Created ->count_servers() that returns the number of servers on a host, how much RAM is used by those servers and, if available, the estimated migration time of the servers. Updated ->check_temperature() to set/clear/return the time that a host has been in a warning or critical temperature state.
* Finished ScanCore->post_scan_analysis_node()!!! It certainly has bugs, and much testing is needed, but the logic is all in place! Oh what a slog that was... It should be far more intelligent than M2 though, once flushed out and tested.
* Created Server->active_migrations() that returns '1' if any servers are in a migration on an Anvil! system. Updated ->migrate_virsh() to record how long a migration took in the "server::migration_duration" variable, which is averaged by ScanCore->count_servers() to estimate migration times.
* Updated scan-drbd to check/update the global-common.conf file's config at the end of a scan.
* Updated ScanCore itself to not scan when in maintenance mode. Also updated it to call 'anvil-safe-start' when ScanCore starts, so long as it is within ten minutes of the host booting.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where, in rare cases, $anvil->hostname() would call 'hostnamectl' and get a dbus error during shutdown, which would then cause the hostname to be changed to the error in the database.
* Fixed a bug in Cluster->boot_server() where it would never verify that a server has started successfully.
* Updated Database->get_ip_addresses() to store the IPs we manage in 'ip_addresses::<ip_address_address>::X'.
* Updated ocf:alteeve:server to work from command line calls, though more testing is still needed.
* Started work on 'anvil-rename-server', but haven't gotten far with it yet.
Signed-off-by: Digimer <digimer@alteeve.ca>
* The get_mmeory endpoint was completed.
* The get_replicated_storage endpoint was completed, though it requires testing and likely has issues.
To prepare for the get_status endpoint work, I needed to update ScanCore and modules to track the host_status. This commit contains the work needed for this.
* Updated ScanCore->post_scan_analysis_striker() to use configured fence devices (except PDUs) to check if a target host is off or on, in there is no host_ipmi interface. In all cases, if a machine can be confirmed on or off, the host_status is now updated.
* To support the above fence based power checks, updated scan-cluster to store the on-disk CIB in the new scan_cluster -> scan_cluster_cib colume.
* Updated ScanCore->parse_cib() to map stonith primitive IDs to fence agents. Updated ->parse_crm_mon() to not call if the executable doesn't exist to avoid unhelpful error messages in the logs when called from a Striker.
* Update DRBD->gather_data() to get the size data from /sys/block/drbd<minor>/size' x '/sys/block/drbd<minor>/queue/logical_block_size so it works when a device is Secondary (and can't be promoted).
* Updated Database->get_hosts_info() to record the short host name as well as the stored host name. Created ->update_host_status() as a wrapper to ->insert_or_update_hosts() that only updates the host status.
* Updated anvil-join-anvil to disabled ksm and ksmtuned daemons.
* Updated scancore and anvil-daemon to set the host_status to 'online' on startup.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Storage->write_file() to add a short UUID suffix to the temp file before rsync'ing to the target to help avoid source temp file name collisions in parallel running copies to different targets.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Get->os_type() to use 'cat' instead of Storage->read_file() because 'rsync' may not be available when it is called during striker-initialize-host calls.
* Updated Database methods to skip 'oui' and 'state' during resync.
* Updatedb striker-initialize-host to detect when it's initializing a CentOS Stream Node / DR Host and enable the HA repo.
* Created the tools/striker-auto-initialize-all tool, which is very much incomplete, that will allow for the rapid creation of a full Anvil! from freshly installed machines autonomously.
Signed-off-by: Digimer <digimer@alteeve.ca>
* This commit includes two unrelated test files for UI work, cgi-bin/get_anvil_status and cgi-bin/get_anvils.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Cluster->shutdown_server() where the wrong variable was being evaluated when checking the server state.
* Created DRBD->delete_resource() that deletes a resource's backing device and configuration. Note that this wipes the DRBD MD and and FS signatures before removing the LV. Updated DRBD->gather_data() to record the backing devices for volumes.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Cluster->parse_cib() when a server that is off wasn't setting 'status'.
* Renamed 'server::location::<server>::host' to '...::host_name' in several places.
* Got more work done on anvil-delete-server, up to the point where it calls the new Cluster->delete_server() method.
* Updated fence_pacemaker to call 'drbdadm adjust all' to dampen an issue where in-memory fence configs seem to change, preventing reconnection of the peer after it reboots from the fence. More testing needed on this issue.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Removed the exit-if-no-DB check in ocf:alteeve:server so that (hopefully, needs testing), running servers won't be impacted if the nodes lost contact with both/all strikers.
* Updated scan-server to make an explicit check for missing XML definition files on startup and write them if needed.
* Very beginning work on anvil-delete-server has been started.
* Updated anvil-provision-server to wait when it's running in peer mode until the new XML definition is in the DB and then write it out to disk before exiting. Also updated it to add the new server to pacemaker before exiting.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->check_agent_data() where the list of tables wasn't passed in, and thus the table list wasn't then passed on to Database->_find_behind_databases().
* Started work on a new method called Storage->parse_lsblk().
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_temperature() to accespt a 'delete' parameter (which, surprise, deletes a record).
* Updated (but not yet tested) the RPM .spec to require that 'core' and the other three packages are required to be the same version.
* Updated scan-ipmitool and scan-storcli scan agents to now delete temperature data belonging to lost sensors.
* Fixed tools/striker-manage-install-target to add multiple missing packages.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created (but not finished) scan-apc-pdu
* Added support to tracking maintenance-mode for nodes in Cluster->parse_cib
* Created Remote->read_snmp_oid().
* Created Server->get_definition.
* Updated Server->get_status() to write-out server XML files on-demand.
* Finished scan-cluster.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updates servers -> server_host_uuid to drop the 'NOT NULL' constraint.
* Created the new Get->server_uuid_from_name() that does what it says on the tin. Fixed a bug in ->host_uuid_from_name() where the host name was being returned instead of the UUID.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the servers table to remove the 'not null' constraints on the server_start_after_server_uuid, server_pre_migration_file_uuid and server_post_migration_file_uuid columns.
* Updated ScanCore->agent_startup() to connect to the database(s) when there isn't a table list.
* Updated Server->migrate_virsh() to test for DB access before making DB calls (to allow ocf:alteeve:server to function even if all ScanCore DBs are offline).
* Updated ocf:alteeve:server to connect to the databases (though work without it), and changed '$FILE_NAME' to be 'ocf:alteeve:server' (to make logging more legible)
* Created the skeleton for 'scan-storage'.
Signed-off-by: Digimer <digimer@alteeve.ca>
Digimer
Madison Kelly