* Fixed a bug where servers protected by DR hosts aren't deleted when the server itself is deleted.
* Updated DRBD->delete_resource() to remove the server's XML file if the host is a DR host.
* Updated anvil-version-change and anvil.sql to enable update_audits and the audits table.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated DRBD->parse_resource() to add references to a resource name and volume for a given backing disk.
* Comtinued work on anvil-manage-server-storage.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Created the new Database->get_lvm_data to compile LVM data from scan-lvm
* Updated DRBD->parse_resource to call Database->get_lvm_data if needed, and to track backing devices to Storage Groups.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Created DRBD->parse_resource() to pass a specific DRBD resource's XML data.
* Fixed a bug in Get->available_resources() so that if the threads is lower than CPU cores, the cores are used as the total available to VMs.
* Fixed bugs in Get->server_from_switch() where it just wasn't working properly.
* Updated scan_drbd to not reset a resource's size to 0-bytes when a resource goes offline.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added a check and exit if anvil-manage-dr is asked to protect a server on a machine that doesn't know about that server.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a duplicate header in words.xml
* Fixed display bugs in anvil-report-usage and removed the old DR host display info.
Signed-off-by: digimer <digimer@gravitar.alteeve.com>
* Created DRBD->check_proxy_license() to do (some level of) sanity checks on the DRBD proxy license file.
* Updated DRBD->gather_data() to parse out the inside and outside ports for resource configs using proxy.
* Reworked DRBD->get_next_resource() to return 1, 3 or 7 TCP ports depending, with the new long_throw_ports parameter triggering the 7 ports.
* Added 'tcpdump' to the anvil-core requires list.
* Reworked scan-drbd to record the ports used in proxy configs. This required adding a check to change the 'scan_drbd_peer_tcp_port' column type to 'text' to support CSVs.
* Reworked anvil-manage-dr (needs testing!) to support "long-throw" DR configs.
* Updated anvil-safe-stop to check if the nodes are in the cluster before trying to migrate.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added multiple new private methods to Network that help in managing the firewall.
* Updated Server->boot_server to manage the firewall after the server boots. Updated ->migrate_server to create a job, if a database connection exists, for the migration target to update it's firewall as soon after the server appears as possible.
* Updated ocf:server:alteeve to manage the firewall when called post-migration, in case there was no DB connection and the job above didn't run. Fixed a bug where the disk state wasn't being evaluated properly.
* Updated scan-server to check that the firewall is managed when a server state has changed.
* Updated anvil-daemon to run Network->manage_firewall on startup.
* Heavily reworked 'anvil-manage-server' to either just run 'Network->manage_firewall', or if passed '--server X', to wait for the server to appear for up to 1 minute, then to check that the firewall is managed (to capture servers being migrated to the host.)
* Removed firewall management from striker-prep-database.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated DRBD->get_devices() to store information about the nodes for each resource.
* Got more work done on anvil-report-usage.
Signed-off-by: Digimer <digimer@alteeve.ca>
Created, but not finished, tools/anvil-report-usage that will print a report of server resource allocation and Anvil! resource availability.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created DRBD->_initialize_drbd() to makes sure the DRBD kernel module can load and tries to build the module, if necessary. This is meant to provide support for clients that can't access needed internet resource (or the internet at all).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-manage-dr to use the TCP ports already configured for a resource when re-configuring a DR resource that has been previously configured.
Signed-off-by: Digimer <digimer@alteeve.ca>
* More bugs fixed in anvil-manage-dr, tested repeatedly as a job and so far, so good. Other functionality still to come.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got anvil-manage-dr to the point where it writes the updated resource configuration to enable DR support. (untexted)
Signed-off-by: Digimer <digimer@alteeve.ca>
Created Storage->get_storage_group_from_path() that takes a block device path and tried to find the Storage Group it belongs to.
Updated Storage->get_storage_group_data() to make it possible to look up a storage group UUID using the SG's name.
Updated DRBD->gather_data() to take a pre-generated XML via the new 'xml' parameter.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in anvil-delete-server where, if a server was off already, the server would not be removed from pacemaker.
* WIP - continuing on scan-network
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated DRBD->allow_two_primaries() to take the 'set_to' parameter which can be 'yes' to all and 'no' to disallow dual-primary.
* Updated ocf:alteeve:server to call allow_two_primaries() with 'set_to' = 'no' instead of calling 'adjust' after a migration completes.
Signed-off-by: Digimer <digimer@alteeve.ca>
* DRBD is now configured to a ping-timeout of 3 seconds.
* Created Log->switches() that returnes the command line switches used by Anvil! tool command line calls based on the active log levels / secure logging. Appended this to all invocations of our tools.
* Updated Database->resync_databases() to now only skip 'jobs' and 'variables' tables with less than 10 record differences. All other differences will trigger a resync.
* Created System->_check_anvil_conf() that, as you might guess, checks in anvil.conf exists and created it (using defaults), if not. It also checks to see if the 'admin' group and user exists and creates them, if not.
* Updated anvil-daemon to check anvil.conf on start up and in each loop. Created the function check_journald() that checks (and sets, if needed) that journald logging is persistent.
* Made striker-manage-peers to check_if_configured on the Database->connect() when updating anvil.conf and the target UUID is the local machine. Also created a loop to make the reconnection a lot more robust.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created DRBD->check_if_syncsource() and ->check_if_synctarget() that return '1' if the target host is currently SyncSource or SyncTarget for any resource, respectively.
* Updated DRBD->update_global_common() to return the unified-format diff if any changes were made to global-common.conf.
* Created ScanCore->check_health() that returns the health score for a host. Created ->count_servers() that returns the number of servers on a host, how much RAM is used by those servers and, if available, the estimated migration time of the servers. Updated ->check_temperature() to set/clear/return the time that a host has been in a warning or critical temperature state.
* Finished ScanCore->post_scan_analysis_node()!!! It certainly has bugs, and much testing is needed, but the logic is all in place! Oh what a slog that was... It should be far more intelligent than M2 though, once flushed out and tested.
* Created Server->active_migrations() that returns '1' if any servers are in a migration on an Anvil! system. Updated ->migrate_virsh() to record how long a migration took in the "server::migration_duration" variable, which is averaged by ScanCore->count_servers() to estimate migration times.
* Updated scan-drbd to check/update the global-common.conf file's config at the end of a scan.
* Updated ScanCore itself to not scan when in maintenance mode. Also updated it to call 'anvil-safe-start' when ScanCore starts, so long as it is within ten minutes of the host booting.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated DRBD->manage_resource() to call 'drbdadm adjust <res>' when starting a resource to help deal with a periodic issue where the 'allow-two-primary' option on the peer doesn't match the local setting.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the scan-hpacucli scan agent. It's been done for a while and should have been added ages ago.
* Updated anvil-rename-server to get to the point where it will take down the DRBD resources on all machines, but waits if there is a sync under way. It also verifies that the server is off on all systems from virsh's perspective.
Signed-off-by: Digimer <digimer@alteeve.ca>
* The get_mmeory endpoint was completed.
* The get_replicated_storage endpoint was completed, though it requires testing and likely has issues.
To prepare for the get_status endpoint work, I needed to update ScanCore and modules to track the host_status. This commit contains the work needed for this.
* Updated ScanCore->post_scan_analysis_striker() to use configured fence devices (except PDUs) to check if a target host is off or on, in there is no host_ipmi interface. In all cases, if a machine can be confirmed on or off, the host_status is now updated.
* To support the above fence based power checks, updated scan-cluster to store the on-disk CIB in the new scan_cluster -> scan_cluster_cib colume.
* Updated ScanCore->parse_cib() to map stonith primitive IDs to fence agents. Updated ->parse_crm_mon() to not call if the executable doesn't exist to avoid unhelpful error messages in the logs when called from a Striker.
* Update DRBD->gather_data() to get the size data from /sys/block/drbd<minor>/size' x '/sys/block/drbd<minor>/queue/logical_block_size so it works when a device is Secondary (and can't be promoted).
* Updated Database->get_hosts_info() to record the short host name as well as the stored host name. Created ->update_host_status() as a wrapper to ->insert_or_update_hosts() that only updates the host status.
* Updated anvil-join-anvil to disabled ksm and ksmtuned daemons.
* Updated scancore and anvil-daemon to set the host_status to 'online' on startup.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in ScanCore->agent_startup() where a (thankfully broken) check to append tables to the 'sys::database::check_tables' would cause an infinite loop as both were pointers to the same anonymous array.
* Fixed a bug in scan-ipmitool where the scan_ipmitool_variables table didn't use a host_uuid reference, causing resyncs of that table to sync for all hosts and cause DB errors when the scan_ipmitool record from another host wasn't sync'ed yet.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Reworked DRBD->get_next_resource() to pull from the database, and to no longer do that increments-of-three nonsense. Avoidable complexity. Also added a call to Cluster->get_anvil_uuid() if the 'anvil_uuid' parameter wasn't passed.
* Updated Database->get_host_from_uuid() and ->get_hosts() to now take 'include_deleted' parameter and default to not returning deleted hosts. This fixed issues where anvil-{delete,provision}-server calls could assign jobs to now-deleted hosts with reused host names.
* Updated anvil-delete-server to print log entries to STDOUT. Also updated it to not wait of shutdown of a server in pacemaker to complete, and instead to destroy it after calling pacemaker's resource stop. Updated to also check to see if the server being deleted is already out of pacemaker and, if so, skip that step and directly try to destroy the server, if it's running.
* Updated anvil-provision-server to force 'peer_mode' runs to pull their TCP Port and DRBD minor numbers from the job. This fixes a bug where the same resource on two machines could use different TCP ports.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Reworked DRBD->get_next_resource() to pull from the database, and to no longer do that increments-of-three nonsense. Avoidable complexity. Also added a call to Cluster->get_anvil_uuid() if the 'anvil_uuid' parameter wasn't passed.
* Updated Database->get_host_from_uuid() and ->get_hosts() to now take 'include_deleted' parameter and default to not returning deleted hosts. This fixed issues where anvil-{delete,provision}-server calls could assign jobs to now-deleted hosts with reused host names.
* Updated anvil-delete-server to print log entries to STDOUT. Also updated it to not wait of shutdown of a server in pacemaker to complete, and instead to destroy it after calling pacemaker's resource stop. Updated to also check to see if the server being deleted is already out of pacemaker and, if so, skip that step and directly try to destroy the server, if it's running.
* Updated anvil-provision-server to force 'peer_mode' runs to pull their TCP Port and DRBD minor numbers from the job. This fixes a bug where the same resource on two machines could use different TCP ports.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Cluster->shutdown_server() where the wrong variable was being evaluated when checking the server state.
* Created DRBD->delete_resource() that deletes a resource's backing device and configuration. Note that this wipes the DRBD MD and and FS signatures before removing the LV. Updated DRBD->gather_data() to record the backing devices for volumes.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished DRBD->get_next_resource() that returns the next available minor and the next free TCP port (with two free ports available after it).
* Created Storage->get_storage_group_details() that pulls together the LVM, storage group members and storage groups into one block of data.
* Made more progress on tools/anvil-provision-server. It now gets up to the point of creating LVs, creating DRBD resource files, loading them, creating metadata and up'ing the resource. It doesn't yet (successfully) force a new resource to primary.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in scan-drbd that was still looking for the scan_drbd_resource_uuid from the resource config file. Also added a check to see if 'scan-drbd::resource_status' directory exists before trying to read the files in it.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created 'Cluster->which_node' that returns 'node1' or 'node2' to indicate which node a host is.
* Continued working on scan_cluster; decided to make it not host-dependent.
Signed-off-by: Digimer <digimer@alteeve.ca>
* More work done on Email->send_email() to, well, actually send email (which it isn't doing yet, but it's close).
* Updated Words->key() to include the bad key name when no entry for the requested key exists in the words.xml file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got email server configuration under way. A mail server can now be configured via Email->_configure_for_server(), but more work is needed on when to switch between configs.
* Fixed some logging of passwords that wasn't being checked to see if secure logging was enabled or not.
* Fixed a bug in Striker where the back arrow in email config sub-sections weren't going back to the main email menu.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Converted most 'eval { }' calls to localize $@ and test the output of the eval, instead of checking to see if $@ was set.
* Converted all 'local' hash references to instead use the short host name of the local machine as a new standard.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the anvil.conf option 'sys::privacy::strong' that controls if the Anvil! ever "calls home". Initially, this controls DRBD's usage flag.
* Updated DRBD->get_devices() to track resources by their 'by-res' names as well and by the normal '/dev/drbdX' devices.
* To mitigate https://bugzilla.redhat.com/show_bug.cgi?id=1868467, updated Get->bridges() to parse the normal (non-JSON) data if we get invalid JSON output.
* Updated anvil-join-anvil to not disable, and in fact enable, libvirtd on boot. With DRBD 9, the original fear of a user accidentally booting a VM that's running on the peer no longer is an issue. By enabling it and leaving it on, Striker dashboard users won't lose their virtual machine manager link unless the node powers off. Also enabled actually updating the job progress, completing this tool!
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where '$target' being preset to 'local' was causing bad calls to 'Remote->call'.
* Updated Storage->change_mode and -> change_owner to work locally and on remote hosts.
* Barely started work on striker->process_anvil_menu().
Signed-off-by: Digimer <digimer@alteeve.ca>
digimer
digimer
Digimer
Fabio M. Di Nitto