* Switched all calls to virsh to use Sys::Virt to deal with contention of simultaneous virsh calls.
* Removed collecting screenshots from scan-server.
* Fixed a bad variable substitution in an alert.
* Fixed a bug where a server's boot time wasn't being recorded properly.
* Reworked how we determine which server definition was most recently updated and propogated.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed handling --eject and --insert to work without a device target specified when only one exists, or to find the file path when only the file name is given.
* Updated anvil-manage-server-storage to show files when processing an optical devices without a file being passed.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated DRBD->manage_resource() to check if the host is StandAlone when asked to 'up' a resource and, if so, connect first. Also updated this to error out gracefully if the call to allow_two_primaries() returns non-zero.
* Update Server->migrate_virsh() to error out gracefully if the DRBD->allow_two_primaries() returns non-zero.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Created System->wait_on_dnf() which was plucked from anvil-daemon, and now also called in scancore and anvil-safe-start.
* Updated scancore and anvil-safe-start to check on start that DRBD's kernel module is available (and build if not).
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a bug in System->reboot_needed() where the cache file path had a typo in the hash key.
* Updated anvil-daemon to use the full path to dnf when determining if a dnf process was running.
Signed-off-by: digimer <mkelly@alteeve.ca>
Note that work has started it reworking anvil-update-system, but it is incomplete (and broken) in this commit.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated Server->shutdown_virsh() to work without a database connection.
* Updated System->reboot_needed() to store/read from a cache file when the database is not available.
* Updated anvil-safe-start to remove the old --enable/disable/status switches, now that we use anvil-safe-start.service systemd unit.
* Reworked anvil-safe-stop to work without a database connection, and to work on DR hosts.
* Updated anvil-special-operations to add new tasks, but it's likely these new tasks aren't needed and will be removed very shortly.
* Added/updated multiple man pages.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated striker-update-cluster and anvil-update-system to take '--reboot' to request a reboot if any packages are updated.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated anvil-update-system to reboot a target whose kernel updated using an anvil-manage-power job,
* Started making striker-update-cluster run as a job (not at all complete). Fixed a bug where the wrong IP was being used when finding access to a target.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a bug in anvil-safe-stop where it wouldn't trigger a migration when the peer is online.
* Updated anvil-update-system to set job_data to 'failed' and exit with rc 4 if the os update failed.
* Got striker-update-cluster to error out and exit if a called 'anvil-update-system' job failed.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated DRBD->get_status() to take the new 'host' paramter to allow the caller to define the hash key string used in the stored data.
* Updated Get->anvil_version() (and a few other places) to use the new 'striker-ui-api' shell user, replacing the 'apache' user.
* Updated Remote->test_access() to take the new 'close' parameter to close the SSH session used when testing access to the target.
* Fixed a logging bug in anvil-manage-power.
* Updated anvil-update-system to take the '--no-reboot' and 'clear-cache' command line switches.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated Remote->call() to remove the 'background' parameter as it wasn't working.
* Updated anvil-manage-server-storage to use 'anvil-manage-server-storage' to adjust resources in a way that doesn't block.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Did more work on adding support for adding new disk drives to servers in anvil-manage-server-storage.
* Updated anvil-manage-storage-groups To check for / delete duplicate storage groups with the same name.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added logging to anvil-provision-server and anvil-daemon to try to find the cause of jobs being re-run after completing. May have fixed with a fix to job_progress updates going to 100 too early in some cases.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a small logging bug in DRBD->allow_two_primaries().
* Updated Database->get_jobs() to record jobs sorted by modified_date so that jobs can be run in the order they were recorded.
* Updated anvil-daemon to track which commands need to be run, and when two or more of the same command need to be run, they're run serially, with each subsequent run starting after the previous one completes.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated DRBD->delete_resource() to call scan-drbd and scan-lvm to ensure that the database is updated with the newly freed resources.
* Updated anvil-delete-server and anvil-provision-server to call select scan agents to ensure freed resources are immediately recorded.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated DRBD->get_status() to attempt to recompile the drbd kernel module if the drbdsetup status fails. If it continues to fail, it exits gracefully now.
* Updated ocf:alteeve:server to test access over a given IP before calling Server->find to avoid timeouts when the peer is down. Also updated it to set the constraints to keep the server on the new host when the old host returns to the cluster.
* Fixed a bug in scan-cluster where a server that is FAILED but not running is now properly recovered.
Signed-off-by: digimer <mkelly@alteeve.ca>
* In DRBD->get_next_resource(), implemented a "hold" system where the DRBD minor and TCP port(s) returned are marked as being held for one minute. So subsequent calls won't use the same numbers.
* In anvil-daemon, added a check in run_jobs() where only one instance of a given job command will be started per 2-second loop. This should help reduce the chance of simultaneous race confitions in general.
* Removed from anvil-provision-server and most other tools the call to Job->get_job_uuid(). If the program is called without the job_uuid, don't try to find it. This allows a human (or script) to make repeated calls to a program without one of those calls running a pending job instead.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Adds support for 'anvil_resources:🐏:reserved' that can be set to a number of MiB to override the default 8192.
* Adds support for 'anvil::<anvil_uuid>::resources:🐏:reserved' to allow for per-Anvil! node override on the reserved RAM default, and over the 'anvil_resources:🐏:reserved' option.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a bug where servers protected by DR hosts aren't deleted when the server itself is deleted.
* Updated DRBD->delete_resource() to remove the server's XML file if the host is a DR host.
* Updated anvil-version-change and anvil.sql to enable update_audits and the audits table.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated Database->get_file_locations() to record files available on Anvil! nodes by tracking hosts in Anvil! systems (needed after reworking how DR hosts are linked).
* Updated Get->available_resources() to call Database->get_files() and ->get_file_locations() to restore tracking files available on Anvil! nodes.
* Fixed a couple display bugs in anvil-provision-server when called with --ci-test --options.
* Continued work on anvil-manage-server-storage.
Signed-off-by: digimer <mkelly@alteeve.ca>
* To update file handling for the new DR host linking mechanism, file_locations -> file_location_anvil_uuid was changed to file_location_host_uuid.
This required a fair number of changes elsewhere to handle this, with a particular noted change to Database->get_anvils() to look at host_uuid's for the subnodes in an Anvil! and, if either is marked as needing a file, make sure the peer is as well. Similarly, any linked DRs are set to have the file as well.
* Created a new Network->find_access that simply takes a target host name or UUID, and it returns a list of networks and IPs that the target can be accessed by.
* Updated Network->load_ips() to find the network interface being used for traffic so that things like the interface speed can be recorded, even when an IP is on a bridge or bond.
Unrelated, but in this commit, is a restoration of calling scan agents with a timeout now that the virsh hang issue has been resolved.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added a check and exit if anvil-manage-dr is asked to protect a server on a machine that doesn't know about that server.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated the storage_group_members table to add the 'storage_group_member_note' that can be set to 'DELETED' to track when a member is deleted. Updated anvil-version-changes to check for and add this column as needed. Updated the anvil.sql schema for the same.
* Updated Cluster->insert_or_update_storage_group_members to add the new column.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Created Database->get_anvil_uuid_from_string(), Database->get_host_uuid_from_string() and Database->get_server_uuid_from_string() to simplify the process of converting --anvil <string>, --host <string> and --server <string> respectively.
* Fixed bugs in Database->get_dr_links() and Database->insert_or_update_dr_links().
* Updated Database->insert_or_update_states() to make direct calls to hosts instead of using get_hosts to drop out if a host_uuid doesn't yet exist in a DB.
Signed-off-by: digimer <digimer@gravitar.alteeve.com>
* Updated Convert->human_readable_to_bytes() to return an empty string if passed an empty string.
Signed-off-by: digimer <digimer@gravitar.alteeve.com>
digimer
Fabio M. Di Nitto
digimer