* This is a test to see if the job waiting for the uptime to be 300s,
leaving the job_progress as 0, was causing the job to be repeatedly
called.
* This is related to issue #479
Signed-off-by: digimer <mkelly@alteeve.ca>
* This adds a check where anvil-join-anvil waits until both subnodes are
marked as configured and not in maintenance mode.
* Should address issue #479 (maybe, this shouldn't trigger reboots, but
it was certainly a race condition found while investigating).
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed handling --eject and --insert to work without a device target specified when only one exists, or to find the file path when only the file name is given.
* Updated anvil-manage-server-storage to show files when processing an optical devices without a file being passed.
Signed-off-by: digimer <mkelly@alteeve.ca>
The old check evaluates the expression before determining whether the
resulting value is defined. However, when the expression refers to a
subroutine, it gets executed; if the subroutine doesn't protect against
missing parameters, it'll cause executions with bad input, i.e., the
Striker->generate_manifest subroutine without parameters.
The new check uses can(), which correctly determines whether the key
"exists" on the blessed object; although it doesn't strictly mean
"exists", but it does the job.
* Fixed the RC in ocf:alteeve:server to exit with 0 on notify calls, resolves issue #392.
* Fixed typo references in issue #390.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated the pcs wrapper to flock anything but status calls.
* Updated scan-apc-pdu to purge regardless of the host it's called on any host.
* Fixed a bug striker-purge-target that wouldn't purge anvil nodes in various cases.
Signed-off-by: digimer <mkelly@alteeve.ca>
avoid storm of virsh list that overloads libvirtd API causing
unnecessary timeouts during pcmk monitoring operations.
Resolves: https://github.com/ClusterLabs/anvil/issues/395
Signed-off-by: Fabio M. Di Nitto <fabbione@fabbione.net>
* Updated striker-update-cluster to take '--timeout' and a number of seconds, or 'Xm' or 'Xh' for minutes or hourse, respectively. Also updated to show the remaining time while waiting, and added waiting timeout to the rest of the while loops that prior had no time limit. This addresses issue #383 and issue #382.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Created System->wait_on_dnf() which was plucked from anvil-daemon, and now also called in scancore and anvil-safe-start.
* Updated scancore and anvil-safe-start to check on start that DRBD's kernel module is available (and build if not).
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated anvil-manage-server-storage, striker-collect-debug, and striker-update-cluster to be able to find a connection on an interface when none were found on preferred networks.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a bug in System->reboot_needed() where the cache file path had a typo in the hash key.
* Updated anvil-daemon to use the full path to dnf when determining if a dnf process was running.
Signed-off-by: digimer <mkelly@alteeve.ca>
Note that work has started it reworking anvil-update-system, but it is incomplete (and broken) in this commit.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added the anvil-report-usage.8 man page
* Updated anvil-update-system to enable scancore when the OS update is complete.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated Server->shutdown_virsh() to work without a database connection.
* Updated System->reboot_needed() to store/read from a cache file when the database is not available.
* Updated anvil-safe-start to remove the old --enable/disable/status switches, now that we use anvil-safe-start.service systemd unit.
* Reworked anvil-safe-stop to work without a database connection, and to work on DR hosts.
* Updated anvil-special-operations to add new tasks, but it's likely these new tasks aren't needed and will be removed very shortly.
* Added/updated multiple man pages.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated striker-update-cluster and anvil-update-system to take '--reboot' to request a reboot if any packages are updated.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated anvil-update-system to reboot a target whose kernel updated using an anvil-manage-power job,
* Started making striker-update-cluster run as a job (not at all complete). Fixed a bug where the wrong IP was being used when finding access to a target.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a bug in anvil-safe-stop where it wouldn't trigger a migration when the peer is online.
* Updated anvil-update-system to set job_data to 'failed' and exit with rc 4 if the os update failed.
* Got striker-update-cluster to error out and exit if a called 'anvil-update-system' job failed.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated DRBD->get_status() to take the new 'host' paramter to allow the caller to define the hash key string used in the stored data.
* Updated Get->anvil_version() (and a few other places) to use the new 'striker-ui-api' shell user, replacing the 'apache' user.
* Updated Remote->test_access() to take the new 'close' parameter to close the SSH session used when testing access to the target.
* Fixed a logging bug in anvil-manage-power.
* Updated anvil-update-system to take the '--no-reboot' and 'clear-cache' command line switches.
Signed-off-by: digimer <mkelly@alteeve.ca>
* ensure valid server UUID with pattern
* allow specify known server host UUID
* combine server UUID and server host UUID (a.k.a. ws host UUID) as
unique record in table
* remove unnecessary checks for ws source port
* Updated Remote->call() to remove the 'background' parameter as it wasn't working.
* Updated anvil-manage-server-storage to use 'anvil-manage-server-storage' to adjust resources in a way that doesn't block.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Continues work on adding new disks (DRBD volumes) to anvil-manage-server-storage.
* Updated DRBD->get_status() to record the peer-role.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Did more work on adding support for adding new disk drives to servers in anvil-manage-server-storage.
* Updated anvil-manage-storage-groups To check for / delete duplicate storage groups with the same name.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Hit a bug where a server's definition file was written to disk while not being valid. Added logging in case it happens again, and additional safe-guards to help avoid it from recurring.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added logging to anvil-provision-server and anvil-daemon to try to find the cause of jobs being re-run after completing. May have fixed with a fix to job_progress updates going to 100 too early in some cases.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added a check to cleanup size input to Convert->human_readable_to_bytes() when passed pre-processed strings.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a small logging bug in DRBD->allow_two_primaries().
* Updated Database->get_jobs() to record jobs sorted by modified_date so that jobs can be run in the order they were recorded.
* Updated anvil-daemon to track which commands need to be run, and when two or more of the same command need to be run, they're run serially, with each subsequent run starting after the previous one completes.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated DRBD->delete_resource() to call scan-drbd and scan-lvm to ensure that the database is updated with the newly freed resources.
* Updated anvil-delete-server and anvil-provision-server to call select scan agents to ensure freed resources are immediately recorded.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated Cluster->recover_server() to set the desired recovery state before calling the crm_resource refresh.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a bug in anvil-version-changes where update_file_location_ready() needed to be called before update_file_locations().
* Added a bit more logging for future debugging.
Signed-off-by: digimer <mkelly@alteeve.ca>
* In DRBD->get_next_resource(), implemented a "hold" system where the DRBD minor and TCP port(s) returned are marked as being held for one minute. So subsequent calls won't use the same numbers.
* In anvil-daemon, added a check in run_jobs() where only one instance of a given job command will be started per 2-second loop. This should help reduce the chance of simultaneous race confitions in general.
* Removed from anvil-provision-server and most other tools the call to Job->get_job_uuid(). If the program is called without the job_uuid, don't try to find it. This allows a human (or script) to make repeated calls to a program without one of those calls running a pending job instead.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a bug where servers protected by DR hosts aren't deleted when the server itself is deleted.
* Updated DRBD->delete_resource() to remove the server's XML file if the host is a DR host.
* Updated anvil-version-change and anvil.sql to enable update_audits and the audits table.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Got more work done on anvil-manage-server-storage; Now shows DRBD resource size, backing LV and size, and calculates/displayes metadata size.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated DRBD->parse_resource() to add references to a resource name and volume for a given backing disk.
* Comtinued work on anvil-manage-server-storage.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Created the new Database->get_lvm_data to compile LVM data from scan-lvm
* Updated DRBD->parse_resource to call Database->get_lvm_data if needed, and to track backing devices to Storage Groups.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated Database->get_file_locations() to record files available on Anvil! nodes by tracking hosts in Anvil! systems (needed after reworking how DR hosts are linked).
* Updated Get->available_resources() to call Database->get_files() and ->get_file_locations() to restore tracking files available on Anvil! nodes.
* Fixed a couple display bugs in anvil-provision-server when called with --ci-test --options.
* Continued work on anvil-manage-server-storage.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated anvil-manage-server-storage to the point where it can now insert and eject optical disks!
* Updated System->call to log parameters if 'shell_call' isn't set.
* Fixed a bug in anvil-manage-server process_interactive where an $anvil->data reference was being scoped.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Created Database->track_files() as a dedicated method as trying to verify the existence of file_locations during Database->load_anvils() was fragile and prone to recursive loops.
* Updated Database->insert_or_update_file_locations() to take an anvil_uuid and recursively call for each host, to maintain compatibility with the old ways, and make it simpler to add an entry for both sub-nodes in an Anvil!.
* Created Storage->push_file() that takes a file and rsync's it to all other machines, or creates a job for the file to be pulled if the target can't be accessed.
* Updated anvil-manage-files and anvil-sync-shared to use the new Storage->push_files and Database->track_files methods.
Signed-off-by: digimer <mkelly@alteeve.ca>
* To update file handling for the new DR host linking mechanism, file_locations -> file_location_anvil_uuid was changed to file_location_host_uuid.
This required a fair number of changes elsewhere to handle this, with a particular noted change to Database->get_anvils() to look at host_uuid's for the subnodes in an Anvil! and, if either is marked as needing a file, make sure the peer is as well. Similarly, any linked DRs are set to have the file as well.
* Created a new Network->find_access that simply takes a target host name or UUID, and it returns a list of networks and IPs that the target can be accessed by.
* Updated Network->load_ips() to find the network interface being used for traffic so that things like the interface speed can be recorded, even when an IP is on a bridge or bond.
Unrelated, but in this commit, is a restoration of calling scan agents with a timeout now that the virsh hang issue has been resolved.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Created DRBD->parse_resource() to pass a specific DRBD resource's XML data.
* Fixed a bug in Get->available_resources() so that if the threads is lower than CPU cores, the cores are used as the total available to VMs.
* Fixed bugs in Get->server_from_switch() where it just wasn't working properly.
* Updated scan_drbd to not reset a resource's size to 0-bytes when a resource goes offline.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a bug in Database->get_storage_group_data() to load hosts data when needed. Also fixed a bug where new members didn't return the new storage_group_member_uuid.
* Updated anvil-manage-host to use the new switch handler.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added a check and exit if anvil-manage-dr is asked to protect a server on a machine that doesn't know about that server.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated the storage_group_members table to add the 'storage_group_member_note' that can be set to 'DELETED' to track when a member is deleted. Updated anvil-version-changes to check for and add this column as needed. Updated the anvil.sql schema for the same.
* Updated Cluster->insert_or_update_storage_group_members to add the new column.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Created Database->get_anvil_uuid_from_string(), Database->get_host_uuid_from_string() and Database->get_server_uuid_from_string() to simplify the process of converting --anvil <string>, --host <string> and --server <string> respectively.
* Fixed bugs in Database->get_dr_links() and Database->insert_or_update_dr_links().
* Updated Database->insert_or_update_states() to make direct calls to hosts instead of using get_hosts to drop out if a host_uuid doesn't yet exist in a DB.
Signed-off-by: digimer <digimer@gravitar.alteeve.com>
