* Continues work on adding new disks (DRBD volumes) to anvil-manage-server-storage.
* Updated DRBD->get_status() to record the peer-role.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added logging to anvil-provision-server and anvil-daemon to try to find the cause of jobs being re-run after completing. May have fixed with a fix to job_progress updates going to 100 too early in some cases.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated DRBD->delete_resource() to call scan-drbd and scan-lvm to ensure that the database is updated with the newly freed resources.
* Updated anvil-delete-server and anvil-provision-server to call select scan agents to ensure freed resources are immediately recorded.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated Cluster->recover_server() to set the desired recovery state before calling the crm_resource refresh.
Signed-off-by: digimer <mkelly@alteeve.ca>
* In DRBD->get_next_resource(), implemented a "hold" system where the DRBD minor and TCP port(s) returned are marked as being held for one minute. So subsequent calls won't use the same numbers.
* In anvil-daemon, added a check in run_jobs() where only one instance of a given job command will be started per 2-second loop. This should help reduce the chance of simultaneous race confitions in general.
* Removed from anvil-provision-server and most other tools the call to Job->get_job_uuid(). If the program is called without the job_uuid, don't try to find it. This allows a human (or script) to make repeated calls to a program without one of those calls running a pending job instead.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Fixed a bug where servers protected by DR hosts aren't deleted when the server itself is deleted.
* Updated DRBD->delete_resource() to remove the server's XML file if the host is a DR host.
* Updated anvil-version-change and anvil.sql to enable update_audits and the audits table.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated Database->get_file_locations() to record files available on Anvil! nodes by tracking hosts in Anvil! systems (needed after reworking how DR hosts are linked).
* Updated Get->available_resources() to call Database->get_files() and ->get_file_locations() to restore tracking files available on Anvil! nodes.
* Fixed a couple display bugs in anvil-provision-server when called with --ci-test --options.
* Continued work on anvil-manage-server-storage.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated anvil-manage-server-storage to the point where it can now insert and eject optical disks!
* Updated System->call to log parameters if 'shell_call' isn't set.
* Fixed a bug in anvil-manage-server process_interactive where an $anvil->data reference was being scoped.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Updated Convert->human_readable_to_bytes() to return an empty string if passed an empty string.
Signed-off-by: digimer <digimer@gravitar.alteeve.com>
* Created Get->virsh_list_net() and Get->virsh_list_os() that call and parse osinfo-query directly to create lists of supported network interfaces and OS optimization options used when provisioning VMs. The later of which is used to replace the old language list of OSes, which was clunky and prone to missing valid options.
* Updated Get->available_resources() to remove the old anvil_dr1_host_uuid mechanism of finding and referencing DR resources.
* Started adding --network support to anvil-provision-server to allow users to specify a specific network bridge, MAC address and model to use for a new VM.
Signed-off-by: Digimer <digimer@alteeve.ca>
* In Cluster->parse_cib(), added parsers for node attributes and resource rules. Also stored the existence of and details of each under the server resources for easier referencing.
* Updated scan-server to check for / add DRBD fence rules as needed.
Scancore APC agent bugs;
* For clarity, converted all '#!no_value!#' and '#!no_connection!#' to use '!!' instead in APC scan agents.
* Fixed a bug to set/clear alerts related to phases disappearing to deal with concurrent logins from different hosts triggering false phase loss alerts.
* Fixed missing variables not being passed to alerts/log entries.
Started more work on anvil-manage-server, but on hold again while the DRBD fencing work is completed.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created DRBD->check_proxy_license() to do (some level of) sanity checks on the DRBD proxy license file.
* Updated DRBD->gather_data() to parse out the inside and outside ports for resource configs using proxy.
* Reworked DRBD->get_next_resource() to return 1, 3 or 7 TCP ports depending, with the new long_throw_ports parameter triggering the 7 ports.
* Added 'tcpdump' to the anvil-core requires list.
* Reworked scan-drbd to record the ports used in proxy configs. This required adding a check to change the 'scan_drbd_peer_tcp_port' column type to 'text' to support CSVs.
* Reworked anvil-manage-dr (needs testing!) to support "long-throw" DR configs.
* Updated anvil-safe-stop to check if the nodes are in the cluster before trying to migrate.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Server->parse_definition() to check if a failed 'virsh list' output was passed in. Also changed it to not exit if the XML can't be parsed.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-boot-server when called with '--all' to honour boot ordering, delays and condtions.
* Updated Database->get_servers() to collect the server's XML as well as data from the 'servers' table.
* Updated anvil-provision-server to make a new DRBD resource 'secondary' after forcing it to primary to begin the initial sync.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added multiple new private methods to Network that help in managing the firewall.
* Updated Server->boot_server to manage the firewall after the server boots. Updated ->migrate_server to create a job, if a database connection exists, for the migration target to update it's firewall as soon after the server appears as possible.
* Updated ocf:server:alteeve to manage the firewall when called post-migration, in case there was no DB connection and the job above didn't run. Fixed a bug where the disk state wasn't being evaluated properly.
* Updated scan-server to check that the firewall is managed when a server state has changed.
* Updated anvil-daemon to run Network->manage_firewall on startup.
* Heavily reworked 'anvil-manage-server' to either just run 'Network->manage_firewall', or if passed '--server X', to wait for the server to appear for up to 1 minute, then to check that the firewall is managed (to capture servers being migrated to the host.)
* Removed firewall management from striker-prep-database.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->get_anvils() to make it possible to translate a file name to a file UUID.
* Updated System->test_ipmi() to quote passwords properly. Also dropped the timeouts to 2 seconds.
* Updated anvil-provision-server to support pure CLI switch server provisioning using the --ci-test (and optional --options {--machine}) to allow CI tests.
* Continued work of anvil-manage-server.
* Fixed a bug in striker-prep-database to fix a bug in writing the pg_hba.conf file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Network->find_matches() to take 'source' and 'line' parameters to help identify the source of issues with missing hashes.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated scan-filesystems to set swap usage alerts to notice level only.
* Updated scan-network to pull the permanent MAC address from an 'ethtool -P <iface>' call to deal with the fact that wireless interfaces don't have their real MAC in the sysfs address file.
* Updated anvil-provision-server to set the rtc_tickpolicy to catchup.
Signed-off-by: Digimer <digimer@alteeve.ca>
Fixed a bug in System->update_hosts() that was causing hosts to be constantly rewritten. (Well, I hope fixed, this has been a notoriously buggy part of the program...)
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the scancore interval to 60 seconds.
* Updated Database->insert_or_update_health() so that 'delete' can find the health_uuid.
* Updated Convert->time() to return silently when passed '-1'.
* Fixed a bug scan-hardware to call Convert->round(). Also fixed it so it didn't set health scores of 0 for mismatch RAM when the RAM was not mismatched.
Signed-off-by: Digimer <digimer@alteeve.ca>
* DRBD is now configured to a ping-timeout of 3 seconds.
* Created Log->switches() that returnes the command line switches used by Anvil! tool command line calls based on the active log levels / secure logging. Appended this to all invocations of our tools.
* Updated Database->resync_databases() to now only skip 'jobs' and 'variables' tables with less than 10 record differences. All other differences will trigger a resync.
* Created System->_check_anvil_conf() that, as you might guess, checks in anvil.conf exists and created it (using defaults), if not. It also checks to see if the 'admin' group and user exists and creates them, if not.
* Updated anvil-daemon to check anvil.conf on start up and in each loop. Created the function check_journald() that checks (and sets, if needed) that journald logging is persistent.
* Made striker-manage-peers to check_if_configured on the Database->connect() when updating anvil.conf and the target UUID is the local machine. Also created a loop to make the reconnection a lot more robust.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->find_host_uuid_columns() and ->_find_column() to create a list of tables and column names in the proper order to allow deletion of foreign keys to that deeply nested primary keys can be deleted. Specifically, this was meant for hosts -> host_uuid and anvils -> anvil_uuid, though it should work for other tables.
* Updated html/jquery-ui-1.12.1/package.json to address CVE-2020-7729
* Fixed a bug in the temperature table's history procedure where temperature_weight wasn't being copied.
* Updated anvil-provision-server to support '--anvil' that can take either the anvil-uuid or anvil-name.
* Updated anvil-safe-stop to default the stop-reason to 'user'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Turned on print to console for logging in anvil-provision-server. Also updated it to check if the cluster is running and hold until it is.
* Cleaned up some code in Get->available_resources() that proved hard to debug.
Signed-off-by: Digimer <digimer@alteeve.ca>
digimer
Fabio M. Di Nitto
digimer
Digimer