* Updated Network->load_ips() to load extra information about the interfaces.
* Updated ocf:alteeve:server to not check libvirtd daemon state on server start.
* Updated scan-hardware to check for duplicate entries and purge if found.
* Updated scan-network to check for the 'default' virbr0 interface by checking if the config file exists instead of calling virsh.
* Updated scan-server to have better logging.
* Created the new (and incomplete) anvil-test-alerts tool
* Updated scancore to support --purge to pass to all agents and then exit.
* Updated ScanCore->call_scan_agents() to no longer use 'timeout' as it was causing issues with virsh calls.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated DRBD->get_devices() to store information about the nodes for each resource.
* Got more work done on anvil-report-usage.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated striker-auto-initialize-all() to reconnect to DBs during waits to better detect when a DB is marked as offline.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Also removed the variables for the database name and DB user name, setting them statically now.
* Created Database->shutdown() to more kindly stop a local database server.
* Added 'check_db_in_use_states()' to anvil-daemon to clean any stale entries marking a database as in use.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->resync_databases() to never run on non-striker machines. On Strikers, before a resync, _age_out_data() is called to clear old data in long-off databases.
* Created System->check_memory() that is loosely based on anvil-check-memory, but checks to see if it's being controlled by a systemctl started daemon and, if so, reads the RAM in use from it's status output.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a divide-by-zero bug in anvil-boot-server when no servers exist yet.
* Fixed a bug in anvil-daemon where the local databsae engine was being started when it shouldn't.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-daemon to check for files in /mnt/shared/incoming on striker dashboards and add them to the media library if needed.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the copywrite date to 2022.
* Updated the database resync to not run on machines host VMs to help reduce the chance of oom-killer terminating a VM.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created DRBD->_initialize_drbd() to makes sure the DRBD kernel module can load and tries to build the module, if necessary. This is meant to provide support for clients that can't access needed internet resource (or the internet at all).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'configure_firewall()' to 'striker-prep-database' to explicitely open the postgresql service for all active zones.
* Did some general logging changes and cleanup around the same.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in anvil-daemon where striker-prep-database was always being called, when it shouldn't in some cases.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-daemon->prep_database() to only run if the database dump file doesn't exist. (If it does, it's clearly configured).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->archive_database() to return the full path to the dump file.
* Disabled enabling the postgresql daemon.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->backup_database() that creates a pg_dump of the active database.
* Created Database->load_database() that loads the database from a flat file, optionally creating a backup before doing so, and using iptables to block access during the process.
* Updated Database->configure_pgsql() to not start the postgresql daemon unless it just initialized the DB.
* Much work, not yet complete, to Database->connect() to stop after the first successful connection. Added logic that, if not connection was established and the host is a Striker, to load a peer's backup, if it exists, and then start the local daemon.
* Updated anvil-daemon to now have a section to run tasks on a ten minute cycle, which will later be used for the primary Striker to dump / copy its database to peer(s).
Signed-off-by: Madison Kelly <mkelly@alteeve.ca>
* Updated Jobs->get_job_uuid() to accept the new 'incomplete' parameter that, when set, will look for jobs whose progress is > 1 and < 100.
* Updated ScanCore-agent_startup() to take the new 'no_db_ok' parameter which returns with '0' if no DB is available and that parameter is set to '1'.
* Fixed a logging bug in 'anvil-join-anvil'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated scan-cluster to get the CIB from pcs instead of reading the CIB from disk.
* Updated anvil-daemon to always call striker-prep-database at log level 2 while trying to find the cause of rare postgres config failures. Also updated striker-prep-database to use the new method of initializing the DB.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed the special job status 'scancore_startup' to 'anvil_startup', given it's handled by anvil-daemon.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the 'print' parameter to Log->variables() to allow printing to STDOUT when set.
* Renamed Network->check_bonds() to Network->check_networks() in anticipation of adding bridge monitoring / repair to it later.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-daemon to call Network->check_bonds() with 'all' on startup, then woth 'down_only' once per minute to try to heal down'ed bonds.
* Updated anvil-watch-bonds to take a 'run-once' switch and exit after one report, if set.
Signed-off-by: Digimer <digimer@alteeve.ca>
* WIP - Continuing work on the new anvil-manage-server tool.
* Updated Database->get_anvils() to load information on the files available on each Anvil! system.
* Updated Database->insert_or_update_network_interfaces() to no longer take the 'timestamp' parameter.
* Removed all logging from Database->refresh_timestamp() to speed it up, given how often it will be called now.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-daemon to have a new function called "handle_special_cases" called during startup that does any weird bug mitigation required. For now, this is used to mitigate against rhbz#1961562, though certainly it will be used for other reasons later.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a problem with Database->insert_or_update_variables() where variable_source_uuid being set to an empty string wasn't converted to NULL.
* Fixed Database->locking() where the way the lock variable was set was rather broken.
* Created Striker->check_httpd_conf() which configured apache to handle the integration of the new WebUI for Anvil! management with the existing WebUI.
* Updated System->update_hosts() to specifically set the 127.0.0.1 and ::1 lines to handle how cloud-init overrides /etc/hosts and breaks CI/CD tests.
* Removed the old index.html as it's now used for the new WebUI.
* Began work on removing DB connection requirements from ocf:alteeve:server.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Bumped scancore's scan delay from 30 seconds to 60.
* Shorted the age-out time to 24 hours and again boosted the archive thresholds. As we get a feel for the amount of data collected on multi-Anvil! systems over time, we may continue to tune this.l
* Moved Database->archive_database() to be called daily by anvil-daemon, instead of during '->connect' calls.
* Added locking to Database->_age_out_data to avoid resyncs mid-purge. Also moved the power, temperature and ip_address columns into the same 'to_clean' hash as it was duplicate logic.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->_age_out_data() to check for certain scan agent tables and, for those found, purge out old records. This should go a long way to keeping the database data responsive.
* Fixed a bug in Jobs->update_progress() where the 'job_picked_up_by' column was being set to '0' instead of '$$' when clearing the job.
* Fixed a bug in System->update_hosts() where '127.0.0.1' would be used in hosts for the actual host name.
* Updated the default trigger, count and division values in anvil.conf to 100,000, 50,000 and 75,000 respectively. In combination with the aging of data, this should go a long way to minimizing database sizes and overheads.
* Updated anvil-daemon to call $anvil->Database->_age_out_data(); in it's daily tasks.
* Updated various striker-X tools to specifically request a DB resync on Database->connect calls.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->_age_out_data() to delete records from the database that are old enough to no longer be useful. This is designed to significantly reduce the size of the database, allowing a better focus on performance.
* Changed Database->connect() to default to NOT check for resync, reworking the old 'no_resync' to 'check_for_resync', so that resync checks happen on demard, instead of by default.
* Updated get_tables_from_schema() to now allow 'schema_file' to be set to 'all', which then loads the schema files of all scan agents as well as the core anvil schema file. Fixed a bug where commented out tables were being counted.
* Re-enabled triggering resyncs on 'last_updated' differences.
* Fixed a bug in scan-ipmitool where the history_id column in history.scan_ipmitool_value was incorrect.
* Created a new tool called striker-show-db-counts that shows the number of records in all public and history schema tables for all databases.
* Updated anvil-update-states to detect when a libvirtd NAT'ed bridge exists and to delete it when found.
Signed-off-by: Digimer <digimer@alteeve.ca>
* DRBD is now configured to a ping-timeout of 3 seconds.
* Created Log->switches() that returnes the command line switches used by Anvil! tool command line calls based on the active log levels / secure logging. Appended this to all invocations of our tools.
* Updated Database->resync_databases() to now only skip 'jobs' and 'variables' tables with less than 10 record differences. All other differences will trigger a resync.
* Created System->_check_anvil_conf() that, as you might guess, checks in anvil.conf exists and created it (using defaults), if not. It also checks to see if the 'admin' group and user exists and creates them, if not.
* Updated anvil-daemon to check anvil.conf on start up and in each loop. Created the function check_journald() that checks (and sets, if needed) that journald logging is persistent.
* Made striker-manage-peers to check_if_configured on the Database->connect() when updating anvil.conf and the target UUID is the local machine. Also created a loop to make the reconnection a lot more robust.
Signed-off-by: Digimer <digimer@alteeve.ca>
