* Reworked scan-ipimitool so that on nodes and dr hosts, it only scans itself. On strikers, it scans all hosts found in active Anvil! systems with a host_ipmi entry. `
* For all agents, reduced log verbosity to not push too much noise into anvil.log while scancore is running in the background.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added checks to anvil-provision-server to see if an existing server name is flagged as DELETED, instead of outright rejecting a given server name.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added checks to anvil-provision-server to see if an existing server name is flagged as DELETED, instead of outright rejecting a given server name.
Signed-off-by: Digimer <digimer@alteeve.ca>
Note: These changes below shouldn't have been in this branch... *sigh*
* Fixed an issue with tools/anvil-provision-server where a VM would be created but didn't boot. When this happens, an explicit boot is sent via virsh. Also bumped up the time it waits for a new server to start up.
* Added an explicit call to scan-drbd after a new resource is created to ensure that if any calls come after looking for the next free DRBD minor or port, they don't use the ones just used.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in anvil-provision-server where forcing initialization of a new DRBD resource when running on node 2 would fail because the node ID in the drbdsetup command was hard-coded to be run from node 1.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Cluster->add_server() to now set failure timeouts to actual numbers instead of INFINITY after discovering that INFINITY doesn't work in those cases.
* Updated Databsae->get_hosts to now check if other entries have the same host name, and if so, to set their host_key to 'DELETED'. This should make it easier to handle when a hardware machine is replaced by new hardware but uses the same host_name.
* Updated Email->check_queue() to start and enable postfix.service if it's found to not be running.
* Updated Get->available_resources() to return '!!no_data!!' when a given host hasn't got any data in scan_lvm_vgs. Now use this in anvil-provision-server to exit if a node or dr host hasn't run scancore yet.
* Fixed a bug in scan-lvm where the pvs_uuid wasn't being loaded properly, preventing lost PVs, VGs and LVs from being flagged as deleted.
* Started work on anvil-migate-server, though it's far from complete.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Cluster->shutdown_server() where the wrong variable was being evaluated when checking the server state.
* Created DRBD->delete_resource() that deletes a resource's backing device and configuration. Note that this wipes the DRBD MD and and FS signatures before removing the LV. Updated DRBD->gather_data() to record the backing devices for volumes.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Cluster->parse_cib() when a server that is off wasn't setting 'status'.
* Renamed 'server::location::<server>::host' to '...::host_name' in several places.
* Got more work done on anvil-delete-server, up to the point where it calls the new Cluster->delete_server() method.
* Updated fence_pacemaker to call 'drbdadm adjust all' to dampen an issue where in-memory fence configs seem to change, preventing reconnection of the peer after it reboots from the fence. More testing needed on this issue.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Removed the exit-if-no-DB check in ocf:alteeve:server so that (hopefully, needs testing), running servers won't be impacted if the nodes lost contact with both/all strikers.
* Updated scan-server to make an explicit check for missing XML definition files on startup and write them if needed.
* Very beginning work on anvil-delete-server has been started.
* Updated anvil-provision-server to wait when it's running in peer mode until the new XML definition is in the DB and then write it out to disk before exiting. Also updated it to add the new server to pacemaker before exiting.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created a new tools/striker-parse-os-list tool that parses 'osinfo-query os' and prints out entries for words.xml for any new OSes.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished DRBD->get_next_resource() that returns the next available minor and the next free TCP port (with two free ports available after it).
* Created Storage->get_storage_group_details() that pulls together the LVM, storage group members and storage groups into one block of data.
* Made more progress on tools/anvil-provision-server. It now gets up to the point of creating LVs, creating DRBD resource files, loading them, creating metadata and up'ing the resource. It doesn't yet (successfully) force a new resource to primary.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in scan-drbd that was still looking for the scan_drbd_resource_uuid from the resource config file. Also added a check to see if 'scan-drbd::resource_status' directory exists before trying to read the files in it.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created the new method Cluster->get_primary_host_uuid() that returns the 'host_uuid' of the primary node in the given cluster. This is useful for external programs to figure out which node is primary. Example is provisioning a new server being assigned to the active node. Also created ->is_primary() that is a similar test to see if the active node is the primary node or not.
* Updated Cluster->parse_cib() and ->parse_crm_mon() to work on remote hosts.
* Updated Database->get_hosts() to store the short host names.
* Created Get->host_from_ip_address() that translates an IP address to a host_uuid and host_name, if it's an IP assigned currently to a known host.
* Created Network->find_target_ip() that simplifies finding which IP address to use when the caller wants to connect to a target host.
* Reworked the anvil-join-anvil to parse fence_arguments in a way that handles passwords with spaces in them.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_jobs() where the 'job_host_uuid' being set to 'all' only translated to a job for the running host.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up the file manager;
** Got the jquery file uploader JS to be sane and altered it to be more useful.
** Got the list of existing files to be displayed (links clickable but not working yet).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up upload.pl now that it isn't responsible for loading the file details into the database. It only sets a job for the local Striker to process the file and move it into /mnt/shared/files, copy it to peer dashboards, then load jobs for Anvil! members to sync the new file.
* Created Database->get_files() and ->get_file_locations() to load the respective data.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got tools/striker-sync-shared to pick up 'upload::move_incoming' jobs, move the uploaded file to /mnt/shared/files/, copies it to peer dashboards, adds it to the 'files' table and adds it to 'file_locations'.
* Reworked the 'file_locations' table to now map files to Anvil! systems, not hosts. It simply tracks if a given file should be on Anvil! members or not. Later, striker-sync-shared on the Anvil! members will pull the file down.
* Updated Storage->get_file_stats() to record the file's mimetype.
* Fixed up a few issues in cgi-bin/upload.pl.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got tools/anvil-provision-server to the point where it askes up to the storage pool / size.
* Created the shell of 'tools/striker-sync-shared' that will sync /mnt/shared/files.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Cluster->assemble_storage_groups() and moved the logic to auto-assemble groups out of Get->available_resources().
* Created Cluster->get_anvil_name() that will return an Anvil! name for a given anvil_uuid, or the name of the Anvil! if the host is a member of an Anvil!.
* Updated Cluster->get_anvil_uuid() to return the 'anvil_uuid' if passed a specific 'anvil_name'.
* Updated Jobs->clear() to use 'switches::job-uuid' when a job_uuid is not passed but the value exists in 'switches::job-uuid'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started work on Get->available_resources() that will take an 'anvil_uuid' and figure out what resources are still available for use by new servers or that can be added to existing servers.
* Fixed a bug in ScanCore->agent_startup() where tables weren't being generated properly from the agent's SQL file.
* Made Storage->change_mode() return silently if it's called without a mode being passed. This happens frequently and is harmless so it's not worth filling the logs with errors.
* Renamed the 'start_time' key to 'at_start' when recording files' MD5 sums in Storage->record_md5sums and ->check_md5sums.
* When we moved the directory scan logic out of the 'scancore' daemon and into 'Storage->scan_directory', the logic to record scan agent names in 'scancore::agent::<file>' was removed. This broke a few things and, so, it was restored when it was found that a file starts with 'scan-' and the directory matches the scancore agent directory.
* Moved the 'scancore' daemon's 'load_agent_strings' to 'Words'
* Updated Words->parse_banged_string() to look for variables in the format 'value=X:units=Y' and translate it properly.
* Fixed a bug in scan-ipmitool where discovered sensor INSERT SQL queries were queued, but not committed.
* Fixed a bug in scan-storcli where a while loop was broken, preventing execution.
* Fixed a bug in the 'scancore' daemon where it wouldn't exit if sums changed. Fixed a bug where alerts weren't being sent between loops. Fixed a bug where command-line log level wasn't surviving inside the main loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->get_power() that loads data from the special 'power' table.
* Fixed a bug in calls to Network->ping() where some weren't formatted properly for receiving two string variables.
* Updated Database->get_anvils() to record the machine types when recording host information.
* Updated Database->get_hosts_info() to also load the 'host_ipmi' column.
* Updated Database->get_upses() to store the link to the 'power' -> 'power_uuid', when available.
* Created ScanCore->call_scan_agents() that does the work of actually calling scan agents, moving the logic out from the scancore daemon.
* Created ScanCore->check_power() that takes a host and the anvil it is in and returns if it's on batteries or not. If it is, the time on batteries and estimate hold-up time is returned. If not, the highest charge percentage is returned.
* Created ScanCore->post_scan_analysis() that is a wrapper for calling the new ->post_scan_analysis_dr(), ->post_scan_analysis_node() and ->post_scan_analysis_striker(). Of which, _dr and _node are still empty, but _striker is complete.
** ->post_scan_analysis_striker() is complete. It now boots a node after a power loss if the UPSes powering it are OK (at least one has mains power, and the main-powered UPS(es) have reached the minimum charge percentage). If it's thermal, IPMI is called and so long as at least one thermal sensor is found and it/they are all OK, it is booted. For now, M2's thermal reboot delay logic hasn't been replicated, as it added a lot of complexity and didn't prove practically useful.
* Created System->collect_ipmi_data() and moved 'scan_ipmitool's ipmitool call and parse into that method. This was done to allow ScanCore->post_scan_analysis_striker() to also call IPMI on a remote machine during thermal down events without reimplementing the logic.
* Updated scan-ipmitool to only record temperature data for data collected locally. Also renamed 'machine' variables and hash keys to 'host_name' to clarify what is being stored.
* Updated scancore to clear the 'system::stop_reason' variable.
* Added missing packages to striker-manage-install-target.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->check_agent_data() where the list of tables wasn't passed in, and thus the table list wasn't then passed on to Database->_find_behind_databases().
* Started work on a new method called Storage->parse_lsblk().
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_temperature() to accespt a 'delete' parameter (which, surprise, deletes a record).
* Updated (but not yet tested) the RPM .spec to require that 'core' and the other three packages are required to be the same version.
* Updated scan-ipmitool and scan-storcli scan agents to now delete temperature data belonging to lost sensors.
* Fixed tools/striker-manage-install-target to add multiple missing packages.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Alert->register() to take message variables using the 'variables' parameter.
* Added a 'cache' parameter to Database->insert_or_update_health() and ->insert_or_update_temperature(). When set, the SQL UPDATE/INSERT calls and pushed into the array reference set in 'cache'. This is to allow performance improvements when processing a large amount of sensor/device data.
* Updated Log->variables() to take a 'prefix' parameter that, when set, will prefix the string to each variable line.
* Updated scan-ipmitool to use Database->insert_or_update_health() and ->insert_or_update_temperature().
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug if Get->free_memory() where host_type was still being called from the old System->host_type method.
* Added global support for '--log-secure' and '--log-db' switches to enable logging of secure data and DB transactions, respectively.
* Created Database->get_tables_from_schema() that parses a SQL schema file and returns an array reference of tables found, in the order they were found.
* Updated ScanCore->agent_startup() to no longer require manually defining database tables, using Database->get_tables_from_schema() when not manually set.. Updated all existing agents to use this.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated ScanCore->agent_startup() to use Database->get_tables_from_schema() when the 'tables' parameter isn't passed.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Get->os_type() to work on local and remote hosts.
* Fixed a but in tools/striker-initialize-host where calls to Network->find_matches() where being checked properly for success/failure.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_power() where the check to see if 'power_ups_uuid' was passed in was reversed. Also fixed a bug where the convertion of the value to TRUE/FALSE for the old value wasn't being set correctly.
* Updated Server->get_definition() to only translate the host name to a uuid if the host uuid wasn't passed in. Added a sanity check on the UUID as well.
* Cleaned up how existing UPSes are displayed in Striker when managing UPSes. Also renamed the form's scan agents to match the real agent names.
* Fixed alert sorting in scan-apc-pdu.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created (but not finished) scan-apc-pdu
* Added support to tracking maintenance-mode for nodes in Cluster->parse_cib
* Created Remote->read_snmp_oid().
* Created Server->get_definition.
* Updated Server->get_status() to write-out server XML files on-demand.
* Finished scan-cluster.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed scan-storage to scan-lvm as we only really care about LVM data in this agent. A dedicated scan-drbd will be created later. Got the agent to parse the pvs/vgs/lvs data.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updates servers -> server_host_uuid to drop the 'NOT NULL' constraint.
* Created the new Get->server_uuid_from_name() that does what it says on the tin. Fixed a bug in ->host_uuid_from_name() where the host name was being returned instead of the UUID.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Server->migrate_virsh() to set 'servers' -> 'server_state' to 'migrating' and clear it again once the migation completes. Also added support for cold (frozen) versus live migrations.
* Updated Cluster->parse_cib() to check if a server with the server_state set to 'migrating' isn't actually migrating anymore and, if not, to clear that state. This is needed as scan-server will blindly ignore/skip any migrating server, and if a migration call is interrupted, the state could get stuck.
* Updated the 'servers' database table (and associated Database methods) to add columns for;
** server_ram_in_use - tracking RAM used by a running server
** server_configured_ram - RAM allocated to a running server (used with the above to alert a user and track _currently_ available RAM)
** server_updated_by_user - To be set by Striker tools to indicate when the user made a change that needs to push out to nodes / running server.
** server_boot_time - Tracks the unixtime when the server booted (to track uptime even if the server migrates across nodes).
* Created Get->anvil_name_from_uuid() to easily convert an Anvil! UUID into a name. Also created ->host_uuid_from_name() to translate a host name into a host UUID.
* Created Server->get_runtime() that translates a server name into a process ID and then uses that to determine how long (in seconds) it has been running. This is used when a server transitions from 'shut off' to 'running' to determine exactly when the server booted (current time - runtime).
* Renamed all 'Server->parse_definition' calls that used 'from_memory' to 'from_virsh' to clarify the data source.
* Made scan-hardware smarter about RAM change alerts.
* Updated scancore to load agent strings on startup so that processing pending alerts works properly.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed the 'defitintions' table to 'server_definitions' to clarify the purpose, and made all the 'server' columns have then 'not null' constraint.
* Created Database->insert_or_update_servers(), ->get_servers(), ->insert_or_update_server_definitions() and ->get_server_definitions().
* Updated scancore, anvil-daemon, and scan agents to not run unless they're run with root privs.
* Got scan-server to update the servers / server_definition tables and the on-disk file when needed.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Began (but haven't finished) Database->insert_or_update_servers().
* Created Storage->get_file_stats() to collect the (l)stat information for a file.
* Got more work done on scan-server.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added support in anvil.conf to disable scan agents with 'scancore::<agent_name>::disable', and added handling this to agents. Also allowed for '--force' to override this setting.
* Updated ScanCore->agent_startup() to allow for empty scan agent table lists.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Did more work on parsing server data out of the CIB. There is still an issue with determining which node currently hosts a resource, however.
* Renamed Server->boot to ->boot_virsh, ->shutdown to ->shutdown_virsh and ->migrate to ->migrate_virsh to clarify that these methods work on the raw virsh calls, outside of pacemaker (indeed, they are what the pacemaker RA uses to do what pacemaker asks).
* Got more work done on the scan-cluster SA.
* Created the empty files for the pending scan-server SA.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created 'Cluster->which_node' that returns 'node1' or 'node2' to indicate which node a host is.
* Continued working on scan_cluster; decided to make it not host-dependent.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Started work on the new scan-cluster scan agent that will parse out and store data from the pacemaker CIB.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Alert->check_alert_sent() and the 'alert_sent' table to remove 'alert_name' as it really isn't helpful given record_locator.
* Created 'Database->purge_data' that takes an array of tables and, in reverse, purges them from the database(s). This also disables archiving and resync functions now.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Alert->register to take a hash reference for message variables to simplify when a caller plans to log and register an alert at the same time.
* Updated Convert->bytes_to_human_readable() to name the 'size' variable used internally for 'bytes' to actually be 'bytes' for better consistency.
* Created multiple new Database methods;
** ->check_condition_age() is meant to be used by scan agents to see how long a given condition has been in play (ie: how long ago power was lost to a UPS or a sensor became unreadable).
** ->insert_or_update_health() handles recording data to the new 'health' table, used for determining ideal hosts for servers between nodes.
** ->insert_or_update_power() handles recording data to the new 'power' table, used for determining how power events are handled.
** ->insert_or_update_temperature() handles recording temperature data to the new 'temperature' table, used to determine how thermal events are handled.
* Got a lot more done on the scan-hardware scan agent. Only part left now is post-scan health processing.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed the scan-network skeleton scan agent to scan-hardware and started work on it based on the M2 version.
* Updated Database->get_recipients() to take the 'include_deleted' parameter, and changed the default behaviour to only return active records.
Signed-off-by: Digimer <digimer@alteeve.ca>
* More work done on Email->send_email() to, well, actually send email (which it isn't doing yet, but it's close).
* Updated Words->key() to include the bad key name when no entry for the requested key exists in the words.xml file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Dropped support for supporting imperial measurements in generated emails.
* Created Database->get_alerts() to read in alert data and ->get_recipients() to get the list of alert recipients.
* SQL Schema changes;
** Added 'alert_processed' to 'alerts' to track what alerts have been processed.
** Changed 'recipient_new_level' to 'recipient_level' now that we're only using 'notifications' as a per-host override for user/hosts alert levels.
** Removed 'recipient_units' as we're no longer supporting non-metric values.
* Updated Alert->register() to take strings for the alert level (which gets translated to integers).
* Created Email->get_current_server() to returned the mail_server_uuid of the active mail server (if any). Created ->send_alerts() to process unprocessed alerts and send emails to recipients.
* Updated Words->parse_banged_string() to take the 'language' parameter.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Enabled anvil-join-anvil debugging of stonith handling to later catch an 'uninitialized value' warning (despite seeming to complete configuration of the Anvil! successfully).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Tools->_set_defaults where the order the tables were sync'ed it caused primary/foreign keys would trigger DB errors when resync'ing in some cases.
* Created Database->log_connections to make it easier to log which databases are actively in use and other data about the connections.
* Fixed bugs in striker-manage-peers that (partly because of the above bugs) failed to connect to new peers properly.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got email server configuration under way. A mail server can now be configured via Email->_configure_for_server(), but more work is needed on when to switch between configs.
* Fixed some logging of passwords that wasn't being checked to see if secure logging was enabled or not.
* Fixed a bug in Striker where the back arrow in email config sub-sections weren't going back to the main email menu.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Converted most 'eval { }' calls to localize $@ and test the output of the eval, instead of checking to see if $@ was set.
* Converted all 'local' hash references to instead use the short host name of the local machine as a new standard.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the anvil.conf option 'sys::privacy::strong' that controls if the Anvil! ever "calls home". Initially, this controls DRBD's usage flag.
* Updated DRBD->get_devices() to track resources by their 'by-res' names as well and by the normal '/dev/drbdX' devices.
* To mitigate https://bugzilla.redhat.com/show_bug.cgi?id=1868467, updated Get->bridges() to parse the normal (non-JSON) data if we get invalid JSON output.
* Updated anvil-join-anvil to not disable, and in fact enable, libvirtd on boot. With DRBD 9, the original fear of a user accidentally booting a VM that's running on the peer no longer is an issue. By enabling it and leaving it on, Striker dashboard users won't lose their virtual machine manager link unless the node powers off. Also enabled actually updating the job progress, completing this tool!
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up a lot of logging.
* Updated Cluster->parse_cib() to track if a stonith device has 'delay' set.
* Got a lot more work done on anvil-join-anvil's stonith processing, but it still isn't complete. Updated it to change shell user passwords as well.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Cluster->parse_cib() to take a CIB as a parameter.
* Fixed a bug in Database->get_hosts() where loading the host_ipmi value was filtered through Log->is_secure.
* Updated Striker->get_fence_data() to parse the switches to make it easier to map a fence agent's command line switches to STDIN arguments.
* Created System->parse_arguments() that converts a series of command line switches and their values into a hash. It's similar to Get->switches(), but works on any string.
* Continued work on anvil-join-anvil's fence configuration logic.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated striker to now only offer gateway for IFN networks. EL8 seems to ignore 'GATEWAY="x"' in interface configs which caused anvil-join-anvil to always think an interface needs to be updated. Updated as well to remove DNS entries set in interfaces that are not the default gateway.
* Fixed a bug where DNS entries were being missed, causing entries to be repeatedly added to the interface that was the gateway interface.
* In anvil-update-states, added Get->switches() so that verbosity switches are used.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed Database->get_ip_addresses() to clear stale IP addresses.
* Finished (for now, more testing needed) System->configure_ipmi! Also created System->test_ipmi() that handles trying lanplus and various password lengths, updating hosts -> host_ipmi on successful check.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got more work done to System->configure_ipmi() to warm reset HP IPMI BMCs. It also now finds the IPMI user have started the password management.
* Created Words->shorten_string() that shortens a string to a number of bytes (as opposed to shortening to a character length).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added calling 'debug => $debug' in System->X methods.
* Got more work done on System->configure_ipmi(). It should now determine if a BMC exists and pull the OEM and network details automatically.
* Updated anvil-configure-host to log more data in an attempt to find a reproducer for an odd bug where (apparently) a host was picking up the wrong job data meant for another host.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Get->host_type() the type wasn't being set for nodes and dr hosts.
* Fixed a bug in Validate->host_name() where the wrong method was being called.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Storage->rsync() to only create the rsync wrapper if a password was given, allowing for rsync to work to/from a remote system when passwordless SSH is enabled.
* Updated anvil-join-anvil to disable/stop drbd.service, and to properly wait until both nodes are online.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Cluster->get_peers() that figures out who the peer node (and DR host, if applicable) are.
* Updated Cluster->parse_cib() to dig out more information.
* Created Cluster->start_cluster() to start pacemaker (via pcsd) locally or on all (both) nodes.
* Started working on ocf:alteeve:server to start/stop the libvirtd/drbd daemons as needed, instead of having pacemaker do it.
* Got more work done on anvil-join-anvil. Node 2 now waits for the cluster to start, and node 1 will do setup as needed, then wait for the cluster to start as well.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got anvil-join-anvil to the point where is initializes and starts the cluster.
* Deleted the old ssh key handling logic in anvil-daemon.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the fix from the last commit for System->call to handle returned data without an ending newline to Remote->call.
* Got more work done on System->update_hosts(). It's able to add new hosts, but misses the short and FQDN host names. Need to fix that and the verify existing / manual entries aren't molested.
Signed-off-by: digimer <digimer@pulsar.alteeve.com>
* Created Get->trusted_hosts() that finds the dashboards the host uses and, if the host is in an Anvil!, the peers in the same anvil.
* Created (but not finished yet) System->update_hosts() that will add and edit entries for all IPs to trusted hosts.
* Fixed a logging bug in Striker->load_manifest().
* Fixed a bug in System->call where, the the output from the shell call didn't end in a new-line, it would not parse the return code and lease the return code string appended to the shell output.
* Fixed a big in System->change_shell_user_password() where a new-line (\n) meant for the shell call wasn't escaped properly. There was also a duplicate 'return_code' variable preventing the actual return code from being read.
* Got more work done on anvil-join-anvil to update the hacluster password (when needed).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Update striker manifest run to add an entry into the 'anvils' table, and pass the anvil_uuid to the jobs rather than the various host_uuid's.
* Fixed a bug in the 'anvils' SQL procedure that copied data into the history schema (a few columns were missing).
* Updated anvil-configure-host to reboot when finished to be certain network changes have taken effect. Also updated the handling of virsh bridges to delete the autostart symlinks if libvirtd daemon isn't running.
* Added some logic to anvil-daemon to call 'anvil-update-states' with the -v{1,3} flag depending on the active debug level.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a global switch --resync-db which takes a UUID and forces that DB to be marked as needing a resync.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->get_hosts() to store 'host_key' and 'host_uuid' data.
* Created Database->get_ssh_keys().
* Fixed a couple bugs where Get->host_type() now returns 'striker' but tests checked for 'dashboard'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated System->generate_state_json() where when the full host name was short, it wouldn't set the short host name properly.
* Fixed a bug in 'tools/anvil-manage-power' where the node wouldn't mark the reboot as complete. Resolves issue #11.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated 'variables' -> 'variable_source_uuid' to type 'uuid' and removed the 'not null' constraint.
* Updated Database->insert_or_update_variables() to check/update 'variables_source_table' and 'variables_source_uuid'.
* Created the 'trusts' database table which will, when done, tell anvil-daemon which users@machines to trust (setup passwordkess SSH).
* Created (but not finished) System->manage_authorized_keys() and moved the logic over to it from anvil-daemon.
* Changed the host types "dashboard" to "striker".
* Moved the following methods from 'System' to 'Get';
** System->get_host_type to Get->host_type
** System->get_bridges to Get->bridges
** System->get_free_memory to Get->free_memory
** System->get_os_type to Get->os_type
** System->get_uptime to Get->uptime
* Updated striker to include the host_uuid for the 'node1', 'node2' and (if chosen) 'dr1' when running a job manifest.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->insert_or_update_ip_addresses() to search for an existing entry by 'ip_address_on_uuid' first, when possible.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished the saving of a "run manifest" job menu. Included filtering out potential machines already in other Anvil! systems from the select box and updating the password fields to not trigger a browser to save/auto-complete the field.
* Fixed a bug in Database->get_hosts() caused by the attempt to immediately return with a 0 if it had been called before. Now a check is made in ->insert_or_update_manifests() where the recursive loop was possible.
* Updated the RPM spec to v.33 after releasing .32 after the last commit. Also added the core requirement for perl-Data-Validate-Domain.
Signed-off-by: Digimer <digimer@alteeve.ca>
