* Update Anvil::Tools->new() to access the parameters 'log_level', 'log_secure' and 'debug', streamlining the frequent calls to $anvil->Log->level and ->secure in program startup, and allowing the values to take effect during the ->new constructor.
* Passed 'debug' to child method calls in more places (still more to do though).
* Fixed a bug where 'test_table' wasn't set in the right place, causing the database to try to initialize repeatedly.
* Made Database->archive_database only run if called with root access.
* Now the number of database connections are stored in 'sys::db_connections' instead of checking the returned number, and that is cleared on disconnect.
* Started working more on 'anvil-daemon', including adding support for System->call being taking 'background', 'stderr_file' and 'stdout_file' paramters which, when set, used Proc::Simple to background the process.
* Did some more work on database archiving, though still far from done.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where "form::error_massage" was default to ' ' which caused simple checks to thing there was an error when all was fine.
* Got the "add new sync peer" form confirmation box displaying and cleaned up the CSS a bit.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Get->users_home() to default to return the hore directory for the user running the program.
* Updated Remote->call() to start working on handling timeouts.
* Updated Storage->change_owner(), ->make_directory() and ->write_file() to default the the user and group running the program.
* Fixed a bug in home reporting the MAC address of NICs when confirming configuration of Striker. Also changed showing the domain to the hostname.
* Got more work done on sync peers.
* Updated the RPM spec file to install on Fedora 28.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added another check and better error handling to Template->get() to print a more useful message if a template is found but fails to parse.
* Moved some strings into the words file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Moved templates around different files to clean things up.
* Moved the "back" and "refresh" icons over to the right by the logo, and added a new icon for handling mail, alerts, install targets and manifests.
* Started work on the Striker configuration sub-page.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where the old style '#!replace!...!#' replacement variables were not being escaped when processing variable insertions into strings.
* Made the body variable be stored in 'form::body' instead of passing around the '$body' variable.
* Created a set of new icons.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up 'button' CSS class links and submit CSS to match.
* Re-enabled reboot at the end of a tools/anvil-configure-striker run.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->insert_or_update_network_interfaces where independent interfaces (not under a bridge or a bond) were not being saved.
* Continued working on improving Striker's network config jquery/form functions.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed some logging in Get->cgi() and generally cleaned up logging levels.
* Got striker to the point where the job to reconfigure the network is saved in the database and the dashboard goes offline until it is done.
* Created the start of the new anvil-configure-network tool.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug with resync, but others remain as resync is incomplete (at least for network_interfaces).
* Currently, tools/anvil-update-states is broken while working on the above issue.
* Reworked the jobs table and removed the units/anvil-jobs.service unit. Jobs will be invoked and backgrounded in all calls.
* Started adding missing hidden form fields.
* Updated the 'server' OCF resource agent version and metadata.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed display issues when showing a summary of what will be done if the user confirms the reconfiguration of the Striker.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Reworked step 2 to allow for empty DNS and empty gateway fields.
* Step2 now loads previous answers from the database properly.
* Fixed (the lack of) recording each network's IP and subnet to the database.
* Added (and disabled for now) a jquery feature for clearing the variables from the URL to keep it from getting exceptionally long.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Record step2 answers into the database.
* Added back hidden for values in config step 2 that recorded step 1's answers.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Validate->form_field() which makes it a little quicker/easier to sanity check a form field that uses one of the other Validate methods.
* Added Validate->is_mac to validate MAC addresses.
* Got config_step2 finishes and sanity checked.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a start-check to make sure 'home' could read the host UUID and exit if not.
* Removed network_interface_current_name / network_interface_requested_name from the network_interfaces DB table and used simply network_interface_name.
* Added caching to Storage->read_file().
* Now record form answers in the variables table as 'form::<form_name>::<variable>::value' and read the same when the form is first loaded.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->connect to always test if hosts table exists and load the core schema if not.
* Fixed Database->write to log all SQL when 'sys::database::log_transactions' is set.
* Got tools/scancore-update-states scanning and recording network interface data to the database. Also removed it writing out the XML status file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a check to Database->archive_database() to return immediately if the check_tables array is empty.
* Created the new Get->cgi() method that reads in CGI variables (as set by the special 'cgi_list' variable).
* Got more work done on the config_step1 funtions.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Tools.pm->_set_paths where a path set to '#!not_found!#' was being set (the existing value should have been left alone).
* Fixed some escaping in Log->entry. Also added some additional checks to error more gracefully.
* Created Storage->copy_file() that, well, copies files.
* Fixed Storage->find to not call Log->entry.
* Fixed Storage->make_directory() to only pass the first digit when passed a GID or UID with more that one digit (as can happen with GIDs).
* Updated Storage->write_file() to take 'secure' as a parameter to treat the file contents as containing secure data for logging purposes.
* Created System->check_daemon and ->start_daemon to check and start systemd daemons, as needed.
* Updated scancore-daemon to support running things just once on invocation (effectively run on boot or daemon restart). Call scancore-database. from here.
* Added reading striker.conf to scancore-update-states.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Convert->cidr() that will convert dotted decimal subnets to CIDR notation and vice versa.
* Created Database->get_local_id that returns the ID from striker.conf that matches the local host, if any,
* Created Get->network_details that returns the host name and a list of interfaces and their IP addresses (if any).
* Created System->call() that takes a shell call and returns the output.
* Created icon for the top-right bar that are "on" (lit up).
* Created a skeleton striker.conf file.
* Created the new scancore-database tool that will manage ScanCore databases.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Template->get() to set the skin directory more cleanly.
* Updated Words->string() to check for a string with #!variable!x!# replacement keys and the 'variables' parameter wasn't passed and throws a useful error are returns '#!error!#'.
* Added top-right icons (see sources.txt for attributions).
* Created a new shared.html template file for shared templates, and added a template for the HTML header.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Storage->write_file() where the parent directory wasn't created if it was missing. Also removed passing the mode to the parent directory creation as the file mode rarely applies to the directory (ie: 644 breaks directories but is common for files).
* Changed Template->skin to return just the skin name, not the path.
* Updated scancore-update-states to write the network state information to both xml (for ScanCore) and JSON (for jquery) files.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed 'defaults::languages' to 'defaults::language'.
* Created Storage->change_mode(), Storage->change_owner(), Storage->make_directory() and Storage->write_file() that does what their names imply, using the shell commands instead of the built-in commands (may switch to them later). The ->make_directory() method will create any needed parent directories.
* Moved System->read_file() to the Storage module as it made more sense there. For now, System is empty.
* Created Words->language to set or check the active output language.
* Fixed Template->get() to use Words->language.
* Updated Words->string() to take the new 'string' parameter which, when set, is used instead of the 'key' parameter and is treated as a pre-retrieved string, so replacement keys are directly injected.
* Updated Template->get() to take the 'variables' parameter and then uses Words->string({string => ...}) to process the replacement keys.
* Updated tools/scancore-update-states to write out the network interface states to the status.xml file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Log->language that sets/returns the active log language.
* Created Log->variables that takes a hash reference and logs their variable: [$value] pairs.
* Created the new /usr/sbin/striker/ directory which is added to the list of search directories. We will store our tools here.
* Created the scancore-daemon and scancore-daemon.unit files which will handle all the things we used to use crontab for, minus ScanCore itself.
* Created the scancore-update-states that will eventually store some machine state information in a file that the web browser can read.
* Created the cgi-bin/home script that will be the main landing page for the Striker UI.
* Added some of the initial html files.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added an index.html and favicon as well as a very basic 'home' cgi script which will allow the web development to start.
Signed-off-by: Digimer <digimer@alteeve.ca>
Digimer