* Fixed a bug in Cluster->parse_cib() where the local machine's ready state was being set to the node name.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Alert-register so that, if 'sort_position' is not set (or set to 9999), an internal counter for each alert level is created and used so that alert entries sort naturally by the order they're registered.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in anvil-delete-server where, if a server was off already, the server would not be removed from pacemaker.
* WIP - continuing on scan-network
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated scan-cluster to get the CIB from pcs instead of reading the CIB from disk.
* Updated anvil-daemon to always call striker-prep-database at log level 2 while trying to find the cause of rare postgres config failures. Also updated striker-prep-database to use the new method of initializing the DB.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated scan-cluster to check / set which node should be preferred if a netsplit causes a fence race.
* Fixed a bug in Server->shutdown_virsh() where a shutdown timeout would go into a loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* WIP - Continuing work on the new anvil-manage-server tool.
* Updated Database->get_anvils() to load information on the files available on each Anvil! system.
* Updated Database->insert_or_update_network_interfaces() to no longer take the 'timestamp' parameter.
* Removed all logging from Database->refresh_timestamp() to speed it up, given how often it will be called now.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-daemon to have a new function called "handle_special_cases" called during startup that does any weird bug mitigation required. For now, this is used to mitigate against rhbz#1961562, though certainly it will be used for other reasons later.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the scancore interval to 60 seconds.
* Updated Database->insert_or_update_health() so that 'delete' can find the health_uuid.
* Updated Convert->time() to return silently when passed '-1'.
* Fixed a bug scan-hardware to call Convert->round(). Also fixed it so it didn't set health scores of 0 for mismatch RAM when the RAM was not mismatched.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Bumped scancore's scan delay from 30 seconds to 60.
* Shorted the age-out time to 24 hours and again boosted the archive thresholds. As we get a feel for the amount of data collected on multi-Anvil! systems over time, we may continue to tune this.l
* Moved Database->archive_database() to be called daily by anvil-daemon, instead of during '->connect' calls.
* Added locking to Database->_age_out_data to avoid resyncs mid-purge. Also moved the power, temperature and ip_address columns into the same 'to_clean' hash as it was duplicate logic.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->_age_out_data() to delete records from the database that are old enough to no longer be useful. This is designed to significantly reduce the size of the database, allowing a better focus on performance.
* Changed Database->connect() to default to NOT check for resync, reworking the old 'no_resync' to 'check_for_resync', so that resync checks happen on demard, instead of by default.
* Updated get_tables_from_schema() to now allow 'schema_file' to be set to 'all', which then loads the schema files of all scan agents as well as the core anvil schema file. Fixed a bug where commented out tables were being counted.
* Re-enabled triggering resyncs on 'last_updated' differences.
* Fixed a bug in scan-ipmitool where the history_id column in history.scan_ipmitool_value was incorrect.
* Created a new tool called striker-show-db-counts that shows the number of records in all public and history schema tables for all databases.
* Updated anvil-update-states to detect when a libvirtd NAT'ed bridge exists and to delete it when found.
Signed-off-by: Digimer <digimer@alteeve.ca>
* DRBD is now configured to a ping-timeout of 3 seconds.
* Created Log->switches() that returnes the command line switches used by Anvil! tool command line calls based on the active log levels / secure logging. Appended this to all invocations of our tools.
* Updated Database->resync_databases() to now only skip 'jobs' and 'variables' tables with less than 10 record differences. All other differences will trigger a resync.
* Created System->_check_anvil_conf() that, as you might guess, checks in anvil.conf exists and created it (using defaults), if not. It also checks to see if the 'admin' group and user exists and creates them, if not.
* Updated anvil-daemon to check anvil.conf on start up and in each loop. Created the function check_journald() that checks (and sets, if needed) that journald logging is persistent.
* Made striker-manage-peers to check_if_configured on the Database->connect() when updating anvil.conf and the target UUID is the local machine. Also created a loop to make the reconnection a lot more robust.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-safe-start to start DRBD resources when the peer's DRBD resourcs is 'Connecting',
* Updated fence_pacemaker to more intelligently check the list of host names related to an IP address when looking for the peer host name
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the scan agent timeout to 60 seconds. Also made the scan agent exit code log entries more helpful.
* Updated System->collect_ipmi_data() to now better handle duplicate sensor names. Now, instead of simply appending an integer, we find the hex address and use that in the sensor name when duplicates exist. This solves the problem of the sensor names not being consistently shown in order.
* Fixed message bugs (bad variable insertions) in scan-apc-pdu and scan-apc-ups.
* Fixed schema procedure bugs in the 'temperature' and 'ip_address' tables where the columns were in bad order, causing constanty updates.
Incomplete work;
* Create the shell of 'anvil-manage-storage', but virtually no logic exists in it yet.
* Started work on anvil-safe-start to deal with an issue where DRBD resources don't start when a server is running on a peer.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Database->find_host_uuid_columns() and ->_find_column() to create a list of tables and column names in the proper order to allow deletion of foreign keys to that deeply nested primary keys can be deleted. Specifically, this was meant for hosts -> host_uuid and anvils -> anvil_uuid, though it should work for other tables.
* Updated html/jquery-ui-1.12.1/package.json to address CVE-2020-7729
* Fixed a bug in the temperature table's history procedure where temperature_weight wasn't being copied.
* Updated anvil-provision-server to support '--anvil' that can take either the anvil-uuid or anvil-name.
* Updated anvil-safe-stop to default the stop-reason to 'user'.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Cluster->check_stonith_config() that checks and, if needed, reconfigures a cluster's fencing (stonith) config.
* Updated scan-cluster to call Cluster->check_stonith_config() at the end of each call.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created DRBD->check_if_syncsource() and ->check_if_synctarget() that return '1' if the target host is currently SyncSource or SyncTarget for any resource, respectively.
* Updated DRBD->update_global_common() to return the unified-format diff if any changes were made to global-common.conf.
* Created ScanCore->check_health() that returns the health score for a host. Created ->count_servers() that returns the number of servers on a host, how much RAM is used by those servers and, if available, the estimated migration time of the servers. Updated ->check_temperature() to set/clear/return the time that a host has been in a warning or critical temperature state.
* Finished ScanCore->post_scan_analysis_node()!!! It certainly has bugs, and much testing is needed, but the logic is all in place! Oh what a slog that was... It should be far more intelligent than M2 though, once flushed out and tested.
* Created Server->active_migrations() that returns '1' if any servers are in a migration on an Anvil! system. Updated ->migrate_virsh() to record how long a migration took in the "server::migration_duration" variable, which is averaged by ScanCore->count_servers() to estimate migration times.
* Updated scan-drbd to check/update the global-common.conf file's config at the end of a scan.
* Updated ScanCore itself to not scan when in maintenance mode. Also updated it to call 'anvil-safe-start' when ScanCore starts, so long as it is within ten minutes of the host booting.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the scan-hpacucli scan agent. It's been done for a while and should have been added ages ago.
* Updated anvil-rename-server to get to the point where it will take down the DRBD resources on all machines, but waits if there is a sync under way. It also verifies that the server is off on all systems from virsh's perspective.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in scan-drbd where the volume_uuid wasn't being stored in the proper hash, breaking insertions into scan_drbd_peers in some cases.
* Updated System->pids() to work with remote targets (will be used later to check for parallel runs of anvil-safe-start).
Signed-off-by: Digimer <digimer@alteeve.ca>
* The get_mmeory endpoint was completed.
* The get_replicated_storage endpoint was completed, though it requires testing and likely has issues.
To prepare for the get_status endpoint work, I needed to update ScanCore and modules to track the host_status. This commit contains the work needed for this.
* Updated ScanCore->post_scan_analysis_striker() to use configured fence devices (except PDUs) to check if a target host is off or on, in there is no host_ipmi interface. In all cases, if a machine can be confirmed on or off, the host_status is now updated.
* To support the above fence based power checks, updated scan-cluster to store the on-disk CIB in the new scan_cluster -> scan_cluster_cib colume.
* Updated ScanCore->parse_cib() to map stonith primitive IDs to fence agents. Updated ->parse_crm_mon() to not call if the executable doesn't exist to avoid unhelpful error messages in the logs when called from a Striker.
* Update DRBD->gather_data() to get the size data from /sys/block/drbd<minor>/size' x '/sys/block/drbd<minor>/queue/logical_block_size so it works when a device is Secondary (and can't be promoted).
* Updated Database->get_hosts_info() to record the short host name as well as the stored host name. Created ->update_host_status() as a wrapper to ->insert_or_update_hosts() that only updates the host status.
* Updated anvil-join-anvil to disabled ksm and ksmtuned daemons.
* Updated scancore and anvil-daemon to set the host_status to 'online' on startup.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in ScanCore->agent_startup() where a (thankfully broken) check to append tables to the 'sys::database::check_tables' would cause an infinite loop as both were pointers to the same anonymous array.
* Fixed a bug in scan-ipmitool where the scan_ipmitool_variables table didn't use a host_uuid reference, causing resyncs of that table to sync for all hosts and cause DB errors when the scan_ipmitool record from another host wasn't sync'ed yet.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->_find_behind_databases() to not trigger a resync if the only difference in a table is the last-updated time and the difference is less than ten seconds. This should dramatically cut back on unnecessary resyncs and reduce load.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Finished scan-filesystems!
* Realized that filesystem UUIDs are not always actual UUIDs, and so created an additonal column in filesystems -> filesystem_internal_uuid and created a normal filesystem_uuid table.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Created Storage->parse_df that, shock!, parses 'df' output. Finished the long-ago started ->parse_lsblk as well.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug in Database->_find_behind_databases() _find_behind_databases() where the logic to figure out which column was the host_uuid reference was too liberal, causing the wrong column to be selected in some cases. Also added a check to not look for host_uuid columns on specific tables where a match would be made, but the column is allowed to be null (like server_host_uuid that indicates the host of the server).
* Started work on the scan-filesystems scan agent, which is needed to record the data that the file system UI endpoints will need.
* Removed the 'not null' constraint from 'servers' -> 'server_host_uuid'.
* Fixed a bug in 'anvil-provision-server' where the driver ISO being 'none' caused the provision script to use the driver ISO switch.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Cleaned up a log of logging to reduce the amount of log entries when running at log level 1.
* Bumped the scan-ipmitool default 'jump' range to 10c.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Reworked scan-ipimitool so that on nodes and dr hosts, it only scans itself. On strikers, it scans all hosts found in active Anvil! systems with a host_ipmi entry. `
* For all agents, reduced log verbosity to not push too much noise into anvil.log while scancore is running in the background.
Signed-off-by: Digimer <digimer@alteeve.ca>
Note: These changes below shouldn't have been in this branch... *sigh*
* Fixed an issue with tools/anvil-provision-server where a VM would be created but didn't boot. When this happens, an explicit boot is sent via virsh. Also bumped up the time it waits for a new server to start up.
* Added an explicit call to scan-drbd after a new resource is created to ensure that if any calls come after looking for the next free DRBD minor or port, they don't use the ones just used.
Signed-off-by: Digimer <digimer@alteeve.ca>
Digimer