* Updated Database->get_file_locations() to record files available on Anvil! nodes by tracking hosts in Anvil! systems (needed after reworking how DR hosts are linked).
* Updated Get->available_resources() to call Database->get_files() and ->get_file_locations() to restore tracking files available on Anvil! nodes.
* Fixed a couple display bugs in anvil-provision-server when called with --ci-test --options.
* Continued work on anvil-manage-server-storage.
Signed-off-by: digimer <mkelly@alteeve.ca>
* Added multiple new private methods to Network that help in managing the firewall.
* Updated Server->boot_server to manage the firewall after the server boots. Updated ->migrate_server to create a job, if a database connection exists, for the migration target to update it's firewall as soon after the server appears as possible.
* Updated ocf:server:alteeve to manage the firewall when called post-migration, in case there was no DB connection and the job above didn't run. Fixed a bug where the disk state wasn't being evaluated properly.
* Updated scan-server to check that the firewall is managed when a server state has changed.
* Updated anvil-daemon to run Network->manage_firewall on startup.
* Heavily reworked 'anvil-manage-server' to either just run 'Network->manage_firewall', or if passed '--server X', to wait for the server to appear for up to 1 minute, then to check that the firewall is managed (to capture servers being migrated to the host.)
* Removed firewall management from striker-prep-database.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->get_host_from_uuid() to cache results.
* Fixed a bug in Database->get_storage_group_data where a DELETE wasn't deleting from the history schema as well.
* In Database->resync_databases(), references to the old 'host_uuid' that we used to use to resync just the local host's data was removed. Added also a check where two or more entries in a given history schema had the same modified_date and, when found, the newest entry is preserved and the rest are deleted. Before this, a resync where two+ records had the same modified_time would only sync the last record, leaving a mismatch in history schema entries triggering repeated resyncs.
* Fixed a bug in Email->send_alerts() where the 'alerts' table was being updated without a modified_date being set.
* Fixed a bug in System->test_ipmi() where the 'hosts' table was being updated without a modified_date being set.
* Updated scan-network to clear up old deleted ip_addresses, bonds and bridges. Also fixed bugs where public schema records were being deleted without history records being deleted.
* Updated anvil-update-states to fix bugs where DELETEs were happening without setting the modified_date.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->get_anvils() to make it possible to translate a file name to a file UUID.
* Updated System->test_ipmi() to quote passwords properly. Also dropped the timeouts to 2 seconds.
* Updated anvil-provision-server to support pure CLI switch server provisioning using the --ci-test (and optional --options {--machine}) to allow CI tests.
* Continued work of anvil-manage-server.
* Fixed a bug in striker-prep-database to fix a bug in writing the pg_hba.conf file.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Also removed the variables for the database name and DB user name, setting them statically now.
* Created Database->shutdown() to more kindly stop a local database server.
* Added 'check_db_in_use_states()' to anvil-daemon to clean any stale entries marking a database as in use.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated striker-prep-database to always set the user's password, independent of whether the database user was created.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'configure_firewall()' to 'striker-prep-database' to explicitely open the postgresql service for all active zones.
* Did some general logging changes and cleanup around the same.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Database->archive_database() to return the full path to the dump file.
* Disabled enabling the postgresql daemon.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated scan-cluster to get the CIB from pcs instead of reading the CIB from disk.
* Updated anvil-daemon to always call striker-prep-database at log level 2 while trying to find the cause of rare postgres config failures. Also updated striker-prep-database to use the new method of initializing the DB.
Signed-off-by: Digimer <digimer@alteeve.ca>
* DRBD is now configured to a ping-timeout of 3 seconds.
* Created Log->switches() that returnes the command line switches used by Anvil! tool command line calls based on the active log levels / secure logging. Appended this to all invocations of our tools.
* Updated Database->resync_databases() to now only skip 'jobs' and 'variables' tables with less than 10 record differences. All other differences will trigger a resync.
* Created System->_check_anvil_conf() that, as you might guess, checks in anvil.conf exists and created it (using defaults), if not. It also checks to see if the 'admin' group and user exists and creates them, if not.
* Updated anvil-daemon to check anvil.conf on start up and in each loop. Created the function check_journald() that checks (and sets, if needed) that journald logging is persistent.
* Made striker-manage-peers to check_if_configured on the Database->connect() when updating anvil.conf and the target UUID is the local machine. Also created a loop to make the reconnection a lot more robust.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Update striker manifest run to add an entry into the 'anvils' table, and pass the anvil_uuid to the jobs rather than the various host_uuid's.
* Fixed a bug in the 'anvils' SQL procedure that copied data into the history schema (a few columns were missing).
* Updated anvil-configure-host to reboot when finished to be certain network changes have taken effect. Also updated the handling of virsh bridges to delete the autostart symlinks if libvirtd daemon isn't running.
* Added some logic to anvil-daemon to call 'anvil-update-states' with the -v{1,3} flag depending on the active debug level.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated Remote->call() to detect when a connection fails because the target's known_hosts entry has changed. Still need to add the function to report this to the user.
* Fixed a bug where new-lines in Words->parse_banged_string() where a double-banged word string's variable value would cause an infinite loop.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Bumped the logging in and fixed a compile-time bug in striker-prep-database.
* Bumped the anvil.spec release to .25.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Renamed a couple Striker-only tools to use the 'striker' prefix instead of 'anvil'.
* Updated the core_tables list.
* Renamed 'sys::log::main' to 'sys::log::file'.
* Fixed some "Back" and "Refresh" links.
* Started planning out the file sync system.
* Started work on the Anvil! setup / host prep system.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added a 'test' parameter to Log->entry, Storage->make_directory and Words->key to help debug in places that Log->x may not be usable.
* Converted many $anvil->Log->x calls to print if $test to help prevent recursive loops, but not all fixed yet.
* Added the new 'host_keys' database table to the schema for a possible new feature of removing passwords in favour if machines adding peers' public keys to their authorized_hosts file.
* Cleaned up the opening calls to $anvil->Tools->new() in most tools.
* Cleaned up some variables in tools/anvil-update-states after reading their values from files (clean trailing newlines).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got anvil-manage-install-target finished creating config files and enabling daemons needed for PXE. Still untested in function though.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated anvil-configure-striker to use Job methods and reboot using anvil-manage-power. Also updated it to set/clear maintenance mode and mark a reboot required at the end of it's run just prior to reboot.
* Lots of log cleanup.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated the RPM to .13 to disable postun's disabling of postgres, which breaks Anvil! software using the database during RPM updates.
* Fixed a logging bug where the number of DB connections was not inserting the number properly.
* Fixed exits in tools/anvil-prep-database.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Got anvil-manage-striker-peers working properly (so far).
* Updated anvil-prep-database to call anvil-manage-striker-peers, but testing still needed.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Update Anvil::Tools->new() to access the parameters 'log_level', 'log_secure' and 'debug', streamlining the frequent calls to $anvil->Log->level and ->secure in program startup, and allowing the values to take effect during the ->new constructor.
* Passed 'debug' to child method calls in more places (still more to do though).
* Fixed a bug where 'test_table' wasn't set in the right place, causing the database to try to initialize repeatedly.
* Made Database->archive_database only run if called with root access.
* Now the number of database connections are stored in 'sys::db_connections' instead of checking the returned number, and that is cleared on disconnect.
* Started working more on 'anvil-daemon', including adding support for System->call being taking 'background', 'stderr_file' and 'stdout_file' paramters which, when set, used Proc::Simple to background the process.
* Did some more work on database archiving, though still far from done.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Set Log->entry to chmod the log file to 666 when the file is opened to ensure apache can write to it.
* Fixed a string replacement variable name.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Updated tools/anvil-prep-database to use a daemon name from Tools.pm to more easily support later postgres version upgrades.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Changed 'database:❌:...' so that 'x' is now the database host's UUID instead of a simple integer. This will simplify sync'ing configs. Also removed default entries, and made it so that anvil-prep-database injects the local config during first setup. Renamed Database->get_local_id to get_local_uuid and changed the 'id' parameter to 'uuid'. Changed Database->initialize's 'id' parameter to 'host_uuid'. The Database->query, Database->write, Database->_mark_database_as_behind and Database->_find_behind_databases methods had their 'id' parameter changed to 'uuid'.
* Added the 'remote_user' parameter to Get->anvil_version, System->ping and System->change_shell_user_password for conencting to remote targets.
* Added the 'remote_user' parameter to all internal Remote->call uses.
* Updated Storage->backup, Storage->copy_file, Storage->make_directory,
Signed-off-by: Digimer <digimer@alteeve.ca>
* Made logging between journald and a traditional file configurable via 'sys::log_file'. Also made the file handle unbuffered when logging to a file.
* Fixed a bug with loading the anvil.conf config file in a few locations.
* Created System->stty_echo() to handle enabling/disabling shell echo, and added restoring the echo to Tools->catch_sig.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Fixed a bug where some '$anvil->{}' variables should have been '$anvil->data->{}'.
* Started merging message keys on 'error_xxxx', 'warning_xxxx', etc.
* The anvil-configure-network now configures the network. Commented out, the tool can reconfigure the entire network without a reboot, but a current issue with the post-configured system refusing to use the allocated interface as the default gateway is to be reviewed at a future time. For now, a closing reboot will be issued.
* Started creating 'anvil-change-password' that will update passwords, including apache (and configure .htpasswd when needed).
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added 'file' and 'line' arguments to the Database->insert_or_update_X methods to allow for the original caller's file and line number to be recorded in the SQL call logs.
* Cleaned up how logging to 'anvil.log' logging is handled.
* Updated anvil-update-states to ignore libvirt bridges and to manually set the speed and duplex of virtio network based interfaces.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the 'debug' parameter to System->enable_daemon.
* Fixed a bug where the old 'Tools.sql' files was being referenced instead of the new 'anvil.sql'.
* Added the 'debug' parameter to Database->initialize and Database->write. Also made it enable the postgresql daemon when initializing the DB.
* Added the 'debug' parameter to Get->host_uuid.
* Fixed the old anvil.conf variable from defaults::log::db_transactions to sys::database::log_transactions.
* Fixed a bad replacement variable name in anvil.sql.
Signed-off-by: Digimer <digimer@alteeve.ca>
* Added the 'debug' parameter to System->call(). Also added a check to make sure that the called executable exists.
* Added the 'debug' parameter to System->start_daemon().
Signed-off-by: Digimer <digimer@alteeve.ca>
* Moved all executables to /usr/sbin/
* Made /root/anvil-backups/ the backup directory.
* Started debuging anvil-prep-database
Signed-off-by: Digimer <digimer@alteeve.ca>
digimer
Digimer
Madison Kelly